Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Similar Messages

Problem installing service pack 3 update

I have windows XP up and running on a seperate drive in my Mac Pro. I am now trying to update Windows by installing service pack 3 update via the Windows Update option in the control panel.
I get an error everytime saying there is not enough disk space. My hard drive have 109GB of free space so I don't know what the problem is.
Any ideas?

jperkinski:
Here is a solution for you that should work:
Boot into Windows XP and get to the desktop.
Click on the START Button
Click on RUN
Type Regedit in the windows and click on OK
*Navigate to*
HKEYLOCALMACHINE\Software\Microsoft\Windows\CurrentVersion\Setup
HKEYLOCALMACHINE
\Software
\Microsoft
\Windows
\CurrentVersion
\Setup
In the right pane, Right-click and select New - String value
Name it as “BootDir” and set its value to “C:\”
Try installing SP3 now and it should work.
Axel F.

Upgrade from Windows Vista 32 bit to Windows 7 32 bit - L500D-11P

Hello,
i bought since few years the notebook L500D-11P. The OS Windows Vista 32 bit was preinstalled. So i found out that i can upgrade my OS to Windows 7 32 bit. But i need a Windows 7 Upgrade Disc. I didnt find it on my Notebook package. Where can i get it?
Thank you for your support.
yours sincerly
tompson

If you need some assistance with Win7, drivers or Toshiba specific stuff installation you are welcome.
Just for your info: install order is very important so let us know when you want to install Win7. We can help you with right installation order.
Before you install Win7 create recovery DVD. After Win7 installation you will lose HDD recovery image and possibility to install Vista using HDD recovery installation.
How to do this is described in Users manuals document.

Windows Vista 64 bit and bios update how? K9A2

OK Is there anyway to really update my bios so I can use my Phenom II if I'm running Vista 64? Ive read the live update info and I'm not sure that works with the 64 bit vista. The i read about the flash drive bios update and I'm not sure that's 64 bit compatible. As a side note why don't they have liveupdate 64bit compatible yet? Its been out for some time and windows 7 will be 64 bit only I would think.
MSI k9A2
Windows Vista 64 bit
curently using a Phenom 9950 BE but want to upgrade to a Phenom II.

Quote from: BIGIRON on 17-January-09, 04:26:58
The i read about the flash drive bios update and I'm not sure that's 64 bit compatible.
The flash drive bios update is not depending on the operating system.
Quote from: BIGIRON on 17-January-09, 04:26:58
As a side note why don't they have liveupdate 64bit compatible yet? Its been out for some time and windows 7 will be 64 bit only I would think.
Sadly MSI hasn't yet supplied us with a 64-bit version of LiveUpdate.
Personally I've been using AMI's Windows Flash Utility AFUWIN.exe several times. Works flawlessly even when running Vista x64.

Problem Installing Service Pack 4

Have I done something stupid?
I followed the seemingly simple steps documented in the readme file. I
copied the weblogic510sp4.jar and weblogic510sp4boot.jar files into my
weblogic/lib directory. I then updated the JavaClasspath and
WebLogicClassPath in my batch file (I launch WebLogic from a batch file).
Everything seems to work fine.
However, when I run java weblogic.Admin t3://localhost:80 VERSION
I get:
WebLogic Build: 5.1.0 04/03/2000 17:13:23 #66825
The documentation says I should get:
WebLogic Build: 5.1.0 Service Pack 4 ...
It appears that the service pack is not installed. Have I don't anything
wrong? When I start the server, I see the appropriate classpaths in the
log - so I know that the path update is being seen.
I have attached a copy of my startWebLogic batch file. Thanks in advance
for any help.
-Dave Ortman
[startWebLogic.cmd]

Thanks!
I had missed that small detail. I think that 10 second post saved me quite
a few headaches.
Thanks for the quick reply,
-Dave Ortman
"Jesse E Tilly" <[email protected]> wrote in message
news:399cbc7e$[email protected]..
The service pack jars need to be first in their respective classpaths.
Jesse
"Dave Ortman" <[email protected]> wrote in message
news:[email protected]..
Have I done something stupid?
I followed the seemingly simple steps documented in the readme file. I
copied the weblogic510sp4.jar and weblogic510sp4boot.jar files into my
weblogic/lib directory. I then updated the JavaClasspath and
WebLogicClassPath in my batch file (I launch WebLogic from a batch
file).
Everything seems to work fine.
However, when I run java weblogic.Admin t3://localhost:80 VERSION
I get:
WebLogic Build: 5.1.0 04/03/2000 17:13:23 #66825
The documentation says I should get:
WebLogic Build: 5.1.0 Service Pack 4 ...
It appears that the service pack is not installed. Have I don'tanything
wrong? When I start the server, I see the appropriate classpaths in the
log - so I know that the path update is being seen.
I have attached a copy of my startWebLogic batch file. Thanks inadvance
for any help.
-Dave Ortman

Problem Installing Enterprise Pack for Eclipse

I am having a problem during the installation with it asking for a Proxy Server and Port Number. In the task bar it says "Connection Failed". The previous screen had asked me if I wanted to register for security updates which I said I did and filled in my email address and password. I am using Norton 360 for my security and disabled the firewall completely but still got same problem. I am not behind a proxy so I'm not sure what may be causing this problem. If anyone has any ideas I would greatly appreciate it. I am using the .exe installer. Thanks so much.
Windows 7 32-bit (SP1)
OEPE 12c +
WebLogic Server 10.3.6 + ADF 11.1.1.6

Bob,
At what point do you get prompted for the proxy details? if I'm not mistaken, that is while WLS server is getting installed and it ask you if you want to keep up to date with patches, if so, I believe you can skip this step.
Juan Camilo

Windows Vista 32-bit to Windows 7 Ultimate 64-bit for running CS4 Premiere Pro

     Greetings, I need some advice on whether to upgrade my computer or not! I am currently running CS4 Premiere Pro (ver 4.2.1) with HD 1080 footage. My computer is a HP d4999z Image maker (Pavillon) using Vista 32-bit OS. It has an AMD 9600 Quad-core processor 2.3 GHz (ADM phenom 64 Nvidia), Ram is 4 GB, Windows Vista Home Prem (service pak2), a Nvidia GEForce 8800GT, creative SB-x-Fi, 3 internal HD and 2 external HD.
     I use PremPro CS4 for video editing of my HD footage. I am a serious amateur, and not a professional. HP says that I can upgrade to Windows 7 Ultimate on my current computer and go from 4 GB ram to 8 GB, but 8GB is the max. So my question is... will an upgrade like this (Wind 7/64 and more RAM), give me significantly faster or better processing? And is Windows 7/64 Ultimate a more stable platform on which to run CS4?
     Eventually, I will go to CS5; but not on this computer. Probably late next year for the new computer.
     Thanks for any advice. Jean

Jean,
I think that you will find Win7-64 with an increase in RAM will offer a bit more stability and performance gain, though only a 64-bit program will get you a real increase. Whether the "bang for the buck" is enough to justify the move, is another matter. Harm and Bill G. can probably quantify that increase in performance for you, to help with the decision.
One caveat that I might offer would be the 64-bit drivers currently available. Word on the street indicates that that situation will likely improve with Win7-64 SP1. As you will be using CS4, you should not have the issue with Effects, CODEC's, etc., being 32-bit, even if you have a 64-bit OS.
Good luck, and expect a couple of folk to have some real-world numbers for you, to help you make the final decision.
Hunt

Access printer installed under windows 7 64-bit from windows xp 32-bit

I have a CP1518ni attached via USB to a Windows 7 64-bit PC. I'd like to use this printer to also print from another PC, a Windows XP 32-bit. When I install a "network printer" on the XP machine, it says the driver is incorrect, probably because it is trying to pull a 64-bit driver over to the 32-bit PC. I've tried downloading and installing the universal driver for XP on the XP machine, but it also says the driver is incorrect when I choose the CP1518 on the Windows 7 PC. Can someone please point me towards a How-To article on this? Or, must I attach the printer to my router in order for both machines to use it?

Welcome to the forums! Are you trying to set the printer up to be wireless or just share the printer from the 64 bit computer to the 32 bit computer? You can share the printer from the 64 bit computer across your network. Here is how to setup print sharing:
Peer to Peer Printer Sharing in Windows XP and Vista
Hope this is what you are looking for!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

After installing Service Pack 2 in Vista, I've lost the pulldown menu in Tools Tab

Pulldown Menu under Tools is "half" missing

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

HP Officejet 4500 G510n-z Wireless connection prints from Windows Vista but not from Windows 7

HP Officejet 4500 G510n-z printer appears to be connected to my Dell Notebook running Windows 7 on the HP Solution Center page but does not print.Documents just get stuck in the que. It was printing then it wasn't then it was then it wasn't. The printer works when I print from an older notebook running Vista. The last time this happened, I uninstalled and reinstalled HP software and that didn't seem to help. Then, for some inexplicable reason, printing started working. Now it has stopped working again.I can scan from the Windows 7 Notebook but no printing. I've tried all of the troubleshooting tools I could find without success. Thanks for trying to help.
This question was solved.
View Solution.

Hello-
It could be caused by a couple things :
1. Firewall on PC or in router.
2. wireless interference (ie microwave, cordless phone base @ 2.4 Ghz)
3. distance from router
4. corrupt print driver.
Turn off any firewalls you have and move anything that can cause interference away from router.
If none of the above resolves issue, I'll have you install another print driver.
Click on start.
Go to Devices and Printers.
Click on Add a Printer.
Add a Local printer. Create a new Port and choose "Standard TCP/IP port.
Hit Next.
Type in 192.168.1.12 in the Hostname or IP address box. (uncheck "Query the printer" box)
Hit next.
When the Printer List opens up, click on windows update. ( this will take a few mins)
After the box shows up, Pick HP (not Hewlett Packard) on the Left and pick "Deskjet 990c" on the Right.
Click next, set as default, and finish.
Try to print using the Deskjet 990c.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Fps drop after downgrading to windows 7 64 bit from Windows 8

Hi,
I downgraded my PC to Win7 from Win8 and it was running smoothly until i tried a game in which the FPS (Frames Per Second) rate has dropped by half of what it was on WIn8. I'm thinking it may be a driver issue, maybe i have to download specific drivers for Win7?
This is the first line of the Intel HD Graphics 4000 Hardware ID:
PCI\VEN_8086&DEV_0166&SUBSYS_2186103C&REV_09
I'm trying to find the version compatible with WIn7 so i can reinstall the driver. Also if anyone has any other ideas or drivers that i should reinstall to increase FPS please let me know.
Thanks,

Hi,
This is second post. Please use the other post.
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Bios recovery for HP dv5-1235dx/Vista (64-bit) crashed during update

My HP Pavillion dv5-1235dx which ran windows vista (64-bit) crashed while updating bios (after my old bios was deleted). I have tried the start+b+power trick to recover but that option did not work. HP Support suggests to create a usb key to install bios, however I have repeatedly failed in recovering/installing bios because the instructions are very limited. They mention a "create a usb key" option that I have yet to find that would make the key. After using the HP UEFI BIOS Update SoftPAQ and extracting files from the bios .exe file, I found the following:
1 folder (sp45138) with contents below
3602F21.fd
3603F21.fd
ding (wave sound)
InsydeFlash (application)
InsydeFlash (text document)
iscflash.dll
iscflash.sys
iscflashx64.sys
platform (configuration settings)
So, my questions are as follows:
Where is the mystery "create a usb key" button?
What files should I have installed on my usb drive?
Does anything have to be renamed or formatted?
Thanks for any help given!

Hello Ceelion21. I understand you're trying to recover your computer from a failed BIOS flash.
I see this question get asked a lot so I have made sure to bookmark the instructions which I found on another website. Here is a link.
You should be able to download the BIOS file from HP Support. I believe you'll need to use an application such as 7-Zip to extract the BIOS file and locate the *.FD file.
If this doesn't work you'll likely need to have the notebook repaired. If you'd like to inquire about a repair through HP Support and are in the US/Canada you can give them a call at 1-800-474-6836. If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.
Let me know the result of the BIOS recovery. I hope you have an excellent night!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

I'm running windows vista 32 bit and the dep shuts down my itunes

I'm running windows vista 32 bit and windows DEP shuts my itunes down as soon as it begins to load. Help?

"the registry settings used by the itunes drivers for importing and burning cds...."
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)

Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.

Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked.

Service Pack for Proliant installing successfully but returning failure in OSD task sequence

Building bare metal servers with SCCM 2012 SP1 CU2 OSD and running into an issue with HPs where they attempt to install the Service Pack for Proliant 2013.02.0. I am using a package with a program. Here is the program command line:
Hpsum.exe /use_latest /allow_non_bundle_components /current_credential /silent
The application installs successfully but there is a distinct delay and then errors thrown that fails the TS. Setting 'continue on error' is a work around but not what I want to have in the production environment. How can I get around this issue?
This is the same exact package and program that ran perfectly fine in SCCM 2007, but we are seeing this as a new issue since the migration to SCCM 2012.
I'd like to solve this issue as well as get rid of the "Waiting for job status notification....InstallSoftware"
Any suggestions?
SMSTS.LOG
Invoking Execution Manager to install software InstallSoftware
12/3/2013 9:59:49 AM 1568 (0x0620)
Installing software for PackageID='WCD002D2' ProgramID='Silent install' AdvertID='WC120008' has started, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Waiting for installation job to complete.. InstallSoftware
12/3/2013 9:59:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:20 AM 1568 (0x0620)
Launching command shell. OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Windows station: WinSta0 OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
executing command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
executed command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:50 AM 1568 (0x0620)
CompleteExecution received InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
CompleteExecution processed InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
Received job completion notification from Execution Manager
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation completed with exit code 0x80070001
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation failed with error (0x80070001)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'=''
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
GetExecRequestMgrInterface successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Releasing job request, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Releasing of Job Request successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
CompleteJob successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Entering ReleaseSource() for D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
reference count 1 for the source D:\_SMSTaskSequence\Packages\WCD002D2 before releasing
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Released the resolved source D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
pInstall->Install(sPackageID, sProgramName), HRESULT=80070001 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Install Software failed, hr=0x80070001 InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Process completed with exit code 2147942401
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the action: HP Server Pack for ProLiant 2013.02.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
MP server http://MP_server.company.com. Ports 80,443. CRL=false.
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Setting authenticator TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set authenticator in transport TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Sending StatusMessage TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting message signatures. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting the authenticator. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
CLibSMSMessageWinHttpTransport::Send: URL: MP_server.company.com:80 CCM_POST /ccm_system/request
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Request was succesful. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionRetCode=-2147024895
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Clear local default environment TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Let the parent group (System Management Install) decides whether to continue execution
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
The execution of the group (System Management Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the last action: HP Server Pack for ProLiant 2013.02. Execution of task sequence failed.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)

Hello Guys!
HP ProLiant Support Pack / Service Pack uses different Exit Codes, due to that this software support other operating systems than Windows. Therefore HP has standardized to use other Exit Codes, which Windows Detect as failures.
HPSum Exit Codes:
ExitCode 1 = "Installation Successful"
ExitCode 2 = "Installation Successful, but a reboot is required"
ExitCode 3 = "Installation was canceled, or no components were updated"
EcitCode 9009 = "Installation did not complete. Check the path and make sure that the Installation exists at the specified location"
HP recommends to use following Batch File to workaround this issue for SCCM:
=======================START_BatchFile=============================
:Init
@Echo Off
Cls
:Main
Echo HP Proliant Service Pack Setup
Echo Source : %~dp0
Echo ===============================================================================
Echo Installing the HP Proliant Service Pack Setup
Echo Command: "%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
"%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
:CheckForErrors
Echo HP Proliant Service Pack Stauts:
If "%errorlevel%"=="0" (
     Echo *******************************************************************************
Echo                            INSTALLATION FAILED!
Echo *******************************************************************************
exit 1
If "%errorlevel%"=="1" (
     Echo Installation Successful!
     exit 0
If "%errorlevel%"=="2" (
     Echo Installation Successful, but a reboot is required.
     exit 3010
If "%errorlevel%"=="3" (
     Echo Installation was canceled, or no components were updated
     exit 0
If "%errorlevel%"=="9009" (
     Echo Installation did not complete. Check the path and make sure that the
Echo Installation exists at the specified location:
Echo Path: %~dp0
Exit 1
:End
Echo An unknown status code was returned from the PSP.
Echo This status code is [%errorlevel%]. This will be treated as a success,
Echo but please check the installation to make sure it completedly properly!
Exit 0
=======================STOP_BatchFile=============================
God Luck!
Best Regards Anders Horgen

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

Similar Messages

Maybe you are looking for