Problem installing Solaris 10 1/06 Operating System

I am trying to install Sol 10 1/06 release.
Problem
CDE fails, with Error Opening PAM libraries ?
Log in to console (as root) fails with:
open_module:/usr/lib/security/pam_authtok_get.so.1 error message
At the same time I am missing /usr/lib/mps/libnss3.so
Thanks
Milan

Please post more details.
How are you trying to do this install? Boot from CD-ROM; JumpStart?
CDE is not normally involved in a Solaris install.

Similar Messages

Installing Solaris 9 with other Operating Systems x86

Hi, I am new to Solaris world. I want to install solaris 9 on my home computer on which I've already installed Windows XP and RedHat Linux 9. I have a few questions regarding the installation process.
(a) Is a primary partition necessary for installing Solaris 9 (I have only one primary partition and free space in extended partition)? Is there a way to boot Solaris 9 from a logical drive in the extended partition?
(b) Will choosing the default option on the Solaris installation fdisk screen erase my previous partitions?
I will appreciate if anybody care to answer.

hi sulemankm
solaris needs a primary partition, booting from a logical drive won't work.
for very detailed information take a look at
http://multiboot.solaris-x86.org/
hth
jenny

Can I install EP in windows 7 Operating system

Hi All,
I have a question.
Can I install EP and SAP NetWeaver Developer Studio on windows 7 Operating system?
If any one has install it on Windows 7 operating system please guide me.
Thanks
Divyanshu

Hi Divyanshu,
The SPS21 support is only a client support (IE8 on Win7 will be fully supported from SPS21 on). There is no official support for the server being installed on Win7. Anyhow, with the XP mode (Windows Virtual PC), it should be possible; the integration of the XP mode into Win 7 is known as quite elegant, even if I have not watched it yet.
Nevertheless, I will give this combination a try in a few weeks, as soon as my new laptop arrives...
NWDS is a problem on 64bit (as far as I see, most power users install Win7-64 instead of Win7-32); see NWDS not working in 64 bit windows vista os for further details. Anyhow, you can go the XP-mode way also for this. As my new notebook will arrive in ~2 weeks, I will play around with the suggestions I have made by my own. So, if I have enough time, maybe I will post a blog some day in July/August/...
Also see NDWS on Windows 7 with some valuable hints.
Hope this helps
Detlev

Can applications in Creative Cloud be installed on a Windows Vista operating system?

Can applications in Creative Cloud be installed on a Windows Vista operating system?

Your question is answered on the Adobe website on each individual product's page.
Bottom line is that, no, Vista is not a supported operating system for CS6 applications.
All support Windows 7 and Windows 8. Some support Windows XP to varying degrees.
None officially support Vista but some users have reported success in running them on Vista.
Your best option may be to download the Master Collection CS6 Trial and see how it performs for you.

Solaris 5.10 All operating system level parameters

HI Experts,
Pl let me know .Solaris 5.10 All operating system level parameters on ECC6.0
.i really appreciate your feed back on this request
Thanks
Hari

You cannot upgrade Solaris (any version) by simply applying patches. You also cannot upgrade Solaris 10 via any sort of downloaded "upgrade" package.
You will need to download the current DVD/CD set, then boot from it. At that point, you will be offered the choice of upgrading your system.

How do i install a free osx or operating system on my macbook pro 2008?

Hey so the go is i have a macbook pro 2008 i love it too bits but for some reason my screen flickers all the time but ill just have to deal with it. Secondly i cant install any operating systems because i dont have a mac to download osx from or mountain lion. And when i go to download it directly from my macbook pro it says i need to buy it :/ or i dont have the licence i cant remember but i just want it working whoever can help me i would much appreciate!! thankyou for reading this and also ps my screen when im on the net on it in the safari osx menu it intermittly spazzes and all the url bars keep clicking etc i dont know what the problem is but i would appreciate some advice or help! it is a good machiene quiet no damage looked after just got it given to me from a family member but i have had no luck so far

Jamesandmacbooks,
if by “free” you mean “gratis” (as opposed to, say, “open source”), then there’s only one version of OS X to date that’s gratis, namely Mavericks. You can only download Mavericks if you currently have Mac OS X 10.6.6 or later installed. If you’re still running Leopard (Mac OS X 10.5.something) on your 2008 MacBook Pro, then you’ll need to first purchase the white retail Snow Leopard DVD, install it on your MacBook Pro, and run Software Update to get it to 10.6.8, after which you can download Mavericks gratis from the Mac App Store and install that. Be sure that your MacBook Pro meets all of Mavericks’ system requirements before trying to install it. If you currently run any PowerPC apps, note that they won’t be supported in any version of OS X after Snow Leopard.

Problems installing Solaris 8 2/04

I installed Solaris 8 2/04 in a Sun Fire V120 (UltraSPARC-IIe 648MHz), the installation finished but when server restarted it displayed this:
"loadkeys: Cannot find /usr/lib/ld.so.1
Killed
kbd: Cannot find /usr/lib/ld.so.1
Killed
cfsfstype: Cannot find /usr/lib/ld.so.1
WARNING: /proc could not be mounted
expr: Cannot find /usr/lib/ld.so.1
/sbin/swapadd: swap: not found
WARNING - /usr/sbin/fsck not found. Most likely the
mount of /usr failed or the /usr filesystem is badly
damaged. The system is being halted. Either reinstall
the system or boot with the -b option in an attempt
to recover."
i tried with boot -b but it did not solve the problem, when i tried to start the server normally it could not, I can oly enter to server in maintenance mode, and the sysem could not found a lot of files (like /usr/sbin) and commands (like ls, boot, init).
I found at the start of the installation this display
"WARNING: /pci@1f,0/pci@1/scsi@8/sd@0,0 (sd0):
Error for Command: write(10) Error Level: Informational
Requested Block: 142093520 Error Block: 142093520
Vendor: COMPAQ Serial Number: 3KT2R4Y3
Sense Key: Soft Error
ASC: 0x5d (<vendor unique code 0x5d>), ASCQ: 0x10, FRU: 0x10"
i do not know if is a hard drive problem. Please help me because i tried three times the installation but the problem still exists

Since this is a fresh installation, you might consider starting it all over again.
You may have made some initial selections while prompted at the beginning of the install process, that accidentally omitted essential system files.
As for that device path and the disk? It's pointing to an external non-Sun peripheral that's connected to the rear external SCSI port. That drive has some bad sectors. ( I wouldn't trust a new OS on those sectors until you fixed them.)
The errors are not calling out either of the two possible internal drives.
Infodoc 21216 lists a few default system device paths, and ...Sun Fire [TM]v120 / Netra[TM] 120
PCI slot 0 /pci@1f,0/pci@1/<device>@1,* 33mhz-32bit-5V
disk 1 /pci@1f,0/pci@1,1/scsi@8/sd@0,0
disk 2 /pci@1f,0/pci@1,1/scsi@8/sd@1,0
External SCSI Port /pci@1f,0/pci@1/scsi@8,1/<device>
CDROM /pci@1f,0/pci@1,1/ide@d/sd@0,0
Network 1 /pci@1f,0/pci@1,1/<network>@c,1
Network 2 /pci@1f,0/pci@1,1/<network>@5,1

Problem installing solaris 10 10/08 (x86) in multi-boot configuration

I'm trying to build a an x86_64 that can boot solaris10, Centos 5.3 and Ubuntu 8.10. (below is the linux fdisk data)
I have successfully installed the Ubuntu (partition 3& 6) and Centos ( parititions 2 &5 ).
Every time I've tried to install solaris, I get "initial fdisk information on disk c0d0 was invalid" and
it wants to reformat the disk with 100% solaris. I've tried
- setting /dev/sda1 as type BE with the Centos fdisk
- setting /dev/sda1 as type BF with the Centos fdisk
- setting /dev/sda1 as type 0 ( empty) with the Centos fdisk
- setting /dev/sda1 as type 0c ( FAT32) and formatting the the partition as FAT32.
I get the same response from solaris each time. I'm new to solaris ( my last sunos exposure was 4.1.1),
and can't figure out what the problem is and don't want to rebuild the whole system.
Any suggestions?
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 13047 104799996 c W95 FAT32 (LBA)
/dev/sda2 13048 26094 104799996 83 Linux
/dev/sda3 * 26095 39141 104799996 83 Linux
/dev/sda4 39142 121601 662359950 5 Extended
/dev/sda5 39142 41230 16779861 82 Linux swap / Solaris
/dev/sda6 41231 43319 16779861 82 Linux swap / Solaris
/dev/sda7 43320 56366 104799996 0 Empty
/dev/sda8 56367 69413 104799996 0 Empty
/dev/sda9 69414 82460 104799996 0 Empty
/dev/sda10 82461 95507 104799996 0 Empty
/dev/sda11 95508 108554 104799996 0 Empty
/dev/sda12 108555 121601 104799996 83 Linux

Just encountered this same problem with an X64 build using a flash archive of Solaris 10/09 and using XVM 2.5.0.1186 :
Installing boot information
cannot mount '/a/rpool': directory is not empty
bootadm: mount of ZFS pool rpool failed
bootadm: cannot mount pool dataset for pool: rpoolWhen I examine the canmount zfs options just after it fails I see :
# zfs get canmount
NAME                PROPERTY VALUE     SOURCE
rpool               canmount noauto    local
rpool/ROOT          canmount on        default
rpool/ROOT/zfsroot canmount noauto    local
rpool/dump          canmount -         -
rpool/swap          canmount -         -Should I be setting canmount=on for just 'rpool' then ?

Problem installing Solaris 10 onto CP1500

I'm trying to install Solaris 10 11/06 onto a CP1500 (UlraSparc-IIi, 440MHZ, 1GB RAM, OpenBoot 3.10.24, using a PS/2 Keyboard). The install CD boots up, but soon after the initial boot (after it displays copyright information but before the installer starts) it goes into a state where it syncs the file system, then reboots. If set to boot from the CD-ROM, it just goes through this process in an continuous loop: boot, cut to file system sync, reboot, cut to file system sync, reboot, wash, rinse, repeat to infinity. The acutal file system sync happens in the blink of an eye. I don't believe that this has anything to do with the state of the hard disk, as it does this even when the hard disk is disconnected from the SCSI bus.
I'm installing from an IDE CD-ROM drive that is connected to the SCSI bus using an adapter. I've sucessfully installed Solaris 8 onto this system, but alas, I need Solaris 10.
Does anyone have any idea what might be causing this? Any help would be appreciated.
Thanks!

I downloaded the latest version of Solaris 10, and that solved the problem of the continual reboots. Now the keyboard doesn't work, but that's a different problem.

Problems installing Solaris 10 on Dell PowerEdge 800

Hi,
I am experiencing some trouble when I attempt to install Solaris 10 on a Dell PowerEdge 800. It is equipped with two RAID disks controlled by a Dell CERC SATA 1.5/6ch (according to the BIOS).
The installation program reports that it cannot write to the disk. This happens when it is about to start installing files. Tried setting it to a single volume and disable RAID. Same thing. Read another article saying something about disabling IDE, well it doesn't seem to help ...
Any hints?

I have the same problem on a dell 750 with the SERC controller. I can add some more information but if you get a solution I would appreciate the detail.
1) If I install Solaris via the SERC in RAID 1 mode then the alarm on the SERC goes off as soon as I start to write to the disk.
2) I bypassed the SERC and installed on a single disk straight off the motherboard. Time the install crashed at the same point but this time the error message told me that the first available cylinder was number 3! Ah
3) I reconnected the disk via the SERC, rebuilt the RAID array and made a mistake. I created a RAID 0 (striped) array and installed the software starting from cylinder 3. I got a complete solaris install that rebooted fine and is fully working.
BUT I NEED A MIRRORED SYSTEM SO
4) I rebuild the machine again this time RAID 1 and again the crash occured at exactly the same point i.e. as soo as I start to write to the disk.
Whether or not DELL / Adaptec support Solaris should not be an issue. This is a BIOS configurable RAID controller that can be fully serviced (e.g. disks replaced) from the BIOS. The system sees the array as a disk via the controller and indeed it is seeing it.
The SERCs own data configuration data should be on sectors which are not visible to solaris VIA the SERC so we shouldnt be able to damage them but I suspect that this may not be the case.
I suspect that the answer is in the partition layout and who or what creates them (I dont mean the Solaris slices but the FDISK partitions)
To make matters worse, since I need the machine working I went back to disks straight of the motherboard and configured again and used metadevices to set up a fully mirrored systemas I have done many times before on sparc (but never on Solaris x86)
This worked fine but I thought that I would test bootability in the event of disk failure. There isnt any!
if disk 1 fails then the motherboard wont accept disk 2 unless you swap the cables and move it do disk 1 and by then the boot sectors are wrong for the address of the device. I can probably solve this by building both disks in slot one but who wants a mirrored server that you have to open up and move a cable when the disk fails. I think I may have to ditch SATA and go back to SCSI !

Problems using Dreamweaver CS5 on Maverick Operating System

I have updated the operating system from Lyon to Maverick and I am having problems using Dreamweaver CS5, I open the program and it closes automatically. I had no problems using Dreamweaver on Lyon operating system. Is there a patch or a solution to this problem? Thanks!

Are you intending to purchase a standalone version of Dreamweaver CS5?
Your work computer has probably got a CS4 Creative Suite installed (Design Premium CS4?).
You won't be able to upgrade Dreamweaver CS4 (from the Suite) on your work computer to standalone Dreamweaver CS5. It's not a valid upgrade path.
Tip: CS6 is due to be released very soon.
http://store.adobe.com/store/en_us/popup/offer/cs55_cs6_faqchannel.html
Although free upgrades from CS5 (purchased after 26 March 2012) are available, there is some paperwork involved. In your position, I personally prefer to wait until CS6 ships - unless CS5 is really the version you want, of course.

Installing In English With Spanish Operating System

Hi:
I purchased an English edition of CS and would like to install it in English, on my computer which is using a Spanish language operating system. How do I accomplish this?

I have the same problem, it is I believe a discriminative practice in the application manager which prevents us from downloading the desired language...I mean discriminatory because it is the so called GeoTacking...it is discriminatory in a bad way because of how it segregates information to just one region or language for example.

Partitions problems installing solaris 8 2/04 on Sun v240

Hi all,
I'm trying to install Solaris 8 on a v240 sun machine. The machine is new, and I think it comes with Solaris 10 installation files pre-loaded. I don't want them, I need Solaris 8.
I'm starting installation booting from cd to use my Solaris 8 cds. During initial installation steps the system promts following question:
Searching for a location to place the Solaris installation software...
Searching disks for upgradeable Solaris root devices...
The following root devices were found to be upgradeable:
Release Root Device
Solaris 10 c1t0d0s0
Swap slices are usually erased at each reboot, so it is preferable
to place the Solaris installation software on a disk slice labeled swap.
The disk slice, c1t0d0s1, labeled as swap,
is large enough to hold the Solaris installation software.
NOTE: All information on the selected swap slice will be erased.
Can c1t0d0s1 be used for the Solaris installation software [y,n,?,q] y
And I need to choose one to go on. Then, when I reach the step to set disk partioning up it tells me that I have to do it using cylinders. I try it, but the slice that is being used in the first step (see above) to store installation files is named as swap and I cannot edit it.
How can I proceed? I want to edit my partioning during installation process as I always have done when installed Solaris before.
What is goin on? any help?
Thanks a lot in advance!!!

Since this is a fresh installation, you might consider starting it all over again.
You may have made some initial selections while prompted at the beginning of the install process, that accidentally omitted essential system files.
As for that device path and the disk? It's pointing to an external non-Sun peripheral that's connected to the rear external SCSI port. That drive has some bad sectors. ( I wouldn't trust a new OS on those sectors until you fixed them.)
The errors are not calling out either of the two possible internal drives.
Infodoc 21216 lists a few default system device paths, and ...Sun Fire [TM]v120 / Netra[TM] 120
PCI slot 0 /pci@1f,0/pci@1/<device>@1,* 33mhz-32bit-5V
disk 1 /pci@1f,0/pci@1,1/scsi@8/sd@0,0
disk 2 /pci@1f,0/pci@1,1/scsi@8/sd@1,0
External SCSI Port /pci@1f,0/pci@1/scsi@8,1/<device>
CDROM /pci@1f,0/pci@1,1/ide@d/sd@0,0
Network 1 /pci@1f,0/pci@1,1/<network>@c,1
Network 2 /pci@1f,0/pci@1,1/<network>@5,1

Ethernet problems installing Solaris 10 on Ultra 5

I am trying to install on a Sun Sparc Ultra 5 which I have inherited. The machine booted up OK with Solaris 7 with the old user's set up, but I do not have his ids or passwords.
When I try to install Solaris 10, early in the boot it comes up with "attempting to configure interface hme0..."
the a wait for a while then "Skipped interface hme0"
The network is OK and so is the cable - I checked them by swapping the leads with my lap top which could access the network fine.
I then went through and selected the language (English), selected 'networked', 'dhcp' then 'IPv6' then it comes up with "just a moment" then a long wait before "Could not contact a dhcp server on network interface hme0"
The dhcp server on the University network was fine.
I would be very grateful for any ideas or suggestions.
Many thanks,
Chris.

Christian,
The integrated NIC may or may not be working.
I'm going to presume you have a Sun keyboard, a Sun mouse and a monitor connected.
I'm also going to presume, unless you tell us otherwise, that you have never worked with Sun systems, before this Ultra-5.
Boot the system.
Just as you see a signal successfully activate the monitor, hold the STOP key and press the letter "A".
This stop-a sequence will halt the boot process and leave you at OpenBoot. Your screen prompt will the the word OK
There are many tests that you can perform at OBP, without invoking any OS. For today's tasks, you can prepare the chassis for a network circuit test.
Do ...
 OK set-defaults <enter>
OK setenv auto-boot? false <enter> (note the question mark character)
OK reset-all <enter>
Those three items will clear the OBP of any confusing or customized settings, then it will prepare the chassis to always stop automatically at the OK prompt, then it will write your choices to the PROM and reboot the system.
You can reset the auto-boot? back to true when you are finished.
After the reboot it should automatically stop at OK.
If it does not do so, then you had a typo in your commands.
Type sifting watch to be presented with all the command syntax that includes the word "watch". Find the network test that checks for connectivity.
Do ...
OK watch-net <enter>
If the Ethernet port has link to a valid network, you will see dots scroll along. An occasional 'X' is a lost packet.
You can download the 211+ page PDF file for the OBP 3.x command reference from Sun's documentation site, Docs.Sun.Com.
http://docs.sun.com/app/docs/coll/1140.2?q=openboot+command+ reference
This is all described in that PDF.

Problem installing Solaris on a Ultra 10

I have been trying to install Solaris 10 but I can�t I don�t know why, after the first boot my Sparc 10 (Serial #16605019 � Host ID: 80fd5f5b � Ethernet address: 8:0:20:fd:5f:5b)) stop on the following step:
Boot device: disk File and args:
SunOs Release ��..
Copyright �� All rights reserved.
So, I tried to install Solaris 8 just to check with the problem was a media issue but the same thing happens
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-01 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved
Therefore, OpenBSD works fine at the same machine.
In conclusion, my Sparc 10 machine can�t run Solaris (even 8 or 10). Is it possible someone help me with this issue ?
Following my workstation hardware configuration:
UltraSPARC-Iii 440MHz
1 GB Memory
70GB Hard Drive
DVD-RW
OpenBoot 3.25, 1024 MB (50ns)

ok probe-ide
Device 0 ( Primary Master )
ATA Model: MAXTOR STM380215A
Device 1 ( Primary Slave )
Not Present
Device 2 ( Secondary Master )
Removable ATAPI Model: HL-DT-STDVD-RAM GSA-H55N
Device 3 ( Secondary Slave )
Not Present
ok boot -v
Boot device: /pci@1f,0/pci@1,1/ide@3/disk@0,0 File and args: -v
Size: 344496+88281+61647 Bytes
SunOS Release 5.8 Version Generic_108528-01 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved.
Ethernet address = 8:0:20:fd:5f:5b
mem = 1048576K (0x40000000)
avail mem = 1030299648
root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1,1, simba0
simba0 is /pci@1,1/pci@1,1
PCI-device: pci@1, simba1
simba1 is /pci@1f,0/pci@1
PCI-device: ide@3, uata0
uata0 is /pci@1f,0/pci@1,1/ide@3
dad0 at pci1095,6460 target 0 lun 0
dad0 is /pci@1f,0/pci@1,1/ide@3/dad@0,0
<DEFAULT cyl 38307 alt 2 hd 16 sec 255>
root on /pci@1f,0/pci@1,1/ide@3/disk@0,0:a fstype ufs
PCI-device: ebus@1, ebus0
power0 at ebus0: offset 14,724000
power0 is /pci@1f,0/pci@1,1/ebus@1/power@14,724000
su0 at ebus0: offset 14,3083f8
su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
su1 at ebus0: offset 14,3062f8
su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8
PCI-device: SUNW,m64B@2, m640
m640 is /pci@1f,0/pci@1,1/SUNW,m64B@2
m64#0: 1280x1024, 4M mappable, rev 4750.7c
cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x91 clock 440MHz)

Problem installing Solaris 10 1/06 Operating System

Similar Messages

Maybe you are looking for