Problem Installing Solaris Studio 12.X on Solaris 11.2

The response to
$ sudo pkg set-publisher \ -k ~/Desktop/pkg.oracle.com.key.pem \ -c ~/Desktop/pkg.oracle.com.certificate.pem \ -G '*" -g https://pkg.oracle.com/solarisstudio/release solarisstudio
is
pkg set-publisher: only one publisher name may be specified
solarisstudio isn't added as a publisher.
I'm running Solaris 11.2 in a VirtualBox session on a Dell T1500 running Windows 7 64 bit. Please help with any suggestions. Thanks.

Great! BTW, what was wrong?
Thanks.
Nik

Similar Messages

Problem Installing FCP Studio 2 on SL 10.6.2

Hello All
when trying to install an original FCP Studio 2,
the installation gets stuck towards the end. (around 95% of the first general installation disk).
this has happened 3 times.
After rebooting, the programs seems to be in the application folder.
but they are missing many files and meterial.
( because i did'nt get a chanse to go through the other Content disks... )
did anyone had a problem installing FCP Studio 2 on SL ?

Here's a way to work around the possiblitily of a damaged disk or an intermittent dvd reader.
Insert your FCS install disk, make a disk image of it (using Disk Utility) and leave the image on the Desktop. Eject the FCS install disk, and create a disk image for each of the FCS disks.
Now, with all the images on the desktop, double click on the install disk image and start the installation process. It should take less than an hour to install EVERYTHING.
Once the installation is complete, copy the disk images to a safe place. You'll have them available if you ever need to reinstall FCS.
good luck,
x

Problem installing logic studio to my mac 10.6.8 PLEASE HELP!

I am having trouble trying to install Logic Studio on my mac book pro 10.6.8 when i click on the "logicstudio.iso" file it mounts the file but when I "double click" on the "dmg" file nothing happens the "installer" doesn't pop up. I have installed other programs, the installer pops up and installs these programs with no problem. I have no idea why this is happing please PLEASE HELP ME

REboot holding CMD+r keys to boot from your Restore partition, useDisk utility from there to firstRepair Disk, then Repair Permissions.

Problem installing Sun studio creator Please help

can come one please help me with this
i am trying to install sun studio creator on ubunutu but i get an error message saying unable to complete the install
the install logs shows the following error
(27-Dec-2005 17:37:35), Setup.product.install, com.sun.installer.PostInstallCoreAction, msg1, Sun Java Studio Creator Error encountered while installing Sun Java Studio Creator. Please review the log file under this directory: /home/karl/Creator
(27-Dec-2005 17:37:40), Setup.product.install, com.sun.installer.PostInstallWizardAction, err, Error setting pointbase port
(27-Dec-2005 17:37:40), Setup.product.install, com.sun.installer.PostInstallWizardAction, err, Skipping PostInstall actions due to Application Server installation failure with exitcode: -500
any help would be most appreciated
karl

http://forum.java.sun.com/thread.jspa?threadID=5308609

Problem installing Java Studio creator2

I was trying to install Java Studio Creato 2 but due to some reason i had to manuaaly "end task" the installation. It was installing Sun java server 8 at that time.
But now every time i try to install it again it hangs up at around 17% and doesnt moves further for more then 30 min.
I tried deleting the temporary files butthta didnt helped
please help me install it
thank you
Kshitij

There is also the \windows\system*\productregistry file that might prevent a new installation. I don't know when it's created during the installation but you might want to look if you have one and rename/delete it.
Thanks,
-- Marco
http://blogs.sun.com/marcoscorner

Problem installing Visual Studio 2012 Professional, "security ID may not be assigned as the owner of this object"

I'm trying to install Visual Studio 2012 Professional edition on my work laptop, Windows 7 Enterprise, Service Pack 1. I have limited admin rights and should be able to install
programs on this laptop but when I try to install VS 2012, I get the following error message:
"This security ID may not be assigned as the owner of this object."
Any idea why this is happening?

Hi,
You must have administrator credentials to install Visual Studio. However, you do not have to have these credentials to use Visual Studio after it is installed.
More information you can refer to:
http://msdn.microsoft.com/en-us/library/e2h7fzkw(v=vs.110).aspx
Please install the Visual Studio 2012 as the administrator.
Best regards,
Ego [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Problem installing FinalCut Studio

I installed FinalCut Studio to find out it is in french(???) The packaging is in english, the book is in english, but I couldn't find a place during the installation where you can choose the language for the application.

Mac OS X software is multi-lingual. It will automatically use the language that is selected in your System Preferences. If that is set to French, FCP or anything else will appear in French.
You change the language in Mac OS X by dragging it to the top of the list in System Preferences > Language & Text. Everything that you open after that change will appear in the chosen language.

Problem installing WL 6.1 SP3 on Solaris 7 Intel

Dear all,
When I try to run the installation toolkit weblogic610sp3_sol.bin on Solaris 7
Intel, the following error occurs: "Error: can't find libjava.so."
Then, I try to run the toolkit with the following command:
sh weblogic610sp3_sol.bin LAX_VM $JAVA_HOME/bin/java -i console
but it hangs on the create password step.
I wonder if the installation toolkit supports Solaris 7 Intel.
Any answer would be appreciated.
Regards,
Fion

I think the problem is that Solaris comes with JDK 1.2 and that is not good enough.
What does "java -version" show you?
Try it without specifying the LAX_VM so that the jdk within weblogic is used.
Better yet, if you have a previous version of wls installed, use the jdk that came with
it by putting it in your PATH in the FRONT.
export PATH=<whatever>/bea/jdk131_03/bin:$PATH
sh weblogic610sp3_sol.bin install -i console
Wayne Scott
Fion Tam wrote:
Yes, I have Java bin in my path.
When I run installation with the command you've mentioned in the previous reply,
the process still hangs on the create password step.
Fion
"Wayne W. Scott" <[email protected]> wrote:
Try inserting the word "install" before the '-i'
sh weblogic610sp3_sol.bin LAX_VM $JAVA_HOME/bin/java install -i console
Do you have the JAVA bin in your PATH?
Wayne Scott
Fion Tam wrote:
Dear all,
When I try to run the installation toolkit weblogic610sp3_sol.bin onSolaris 7
Intel, the following error occurs: "Error: can't find libjava.so."
Then, I try to run the toolkit with the following command:
sh weblogic610sp3_sol.bin LAX_VM $JAVA_HOME/bin/java -i console
but it hangs on the create password step.
I wonder if the installation toolkit supports Solaris 7 Intel.
Any answer would be appreciated.
Regards,
Fion

Problems Installing Java Studio Enterprise 8.1 - Windows Vista

I am entirely new to the Java language and environment. I am trying to install the JSE 8.1. First I installed JDK 6.4 (jdk-6u4-windows-i586-p.exe), which seemed to go OK. Then I attempted to install the JSE (jstudio_ent81-ml-windows.exe).
First, it did not find a JRE and prompted me to specify, which I did (specified the java.exe within the JDK (Program Files/java/jdk1.6.0_04/bin). The installation continued for a while and then it tells me that "it cannot run the installer in graphical mode - check the DISPLAY environment variable". At this point is closes and that's the end of it. I see no trace of either the JDK nor the JSE in the Start/Programs folder.
Am I doing something wrong? Is Vista a non-starter?
Thanks,
Kevank

Kevank,
Thank you for trying out Sun-sponsored Java developer tools. However in the case of Java Studio Enterprise (JSE) there are two issues here:
1) JSE is not supported on the Windows Vista OS and probably will not run correctly even if it were installable, see http://developers.sun.com/jsenterprise/reference/docs/jse8_1/sjse_relnotes81.html and
2) The latest Java developer tools technology is to be found in the free NetBeans 6.0 IDE at http://www.netbeans.org/ . It is strongly recommended, especially if you are a developer new to Java, that you start out using the NetBeans IDE, which is not only supported on Vista (see http://www.netbeans.org/community/releases/60/relnotes.html#system_requirements ), but also contains the Java Enterprise application development features found in JSE, see http://www.netbeans.org/features/ .
If you have any questions on this please feel free to let us know on the forum.
Regards,
-Brad Mayer

Problem installing Visual Studio 2010

Hi,
I am trying to install VS2010 on a Windows 7 running on a bootcamp partition of my Mac Book Air.
When I insert the DVD on the drive the splash screen shows "Visual Studio 2008 "... It should be 2010.
If I continue the installation it stops in the middle because of a missing file named DW20.EXE, but these file is there.
I have tested the same DVD in a regular PC and the installation went correctly, it installs VS 2010.
Thanks
Marcio ([email protected])

ProfessorPinho wrote:
Hi,
I am trying to install VS2010 on a Windows 7 running on a bootcamp partition of my Mac Book Air.
When I insert the DVD on the drive the splash screen shows "Visual Studio 2008 "... It should be 2010.
If I continue the installation it stops in the middle because of a missing file named DW20.EXE, but these file is there.
I have tested the same DVD in a regular PC and the installation went correctly, it installs VS 2010.
Thanks
Marcio ([email protected])
You might try asking about this on a Windows 7 or Visual Studio forum as the issue appears to have nothing to do with Apple products.

Problem installing dev studio

I have installed the dev studio on a windows workstation and it will not start, I get the following error
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 17, 2005 07:25:13.767
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:286)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:795)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:602)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: java.lang.NumberFormatException: For input string: ""
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:489)
     at java.lang.Integer.parseInt(Integer.java:518)
     at com.tssap.config.ProxySettings.parse(ProxySettings.java:184)
     at com.tssap.config.ProxySettings.loadFromPreferences(ProxySettings.java:114)
     at com.tssap.config.Startup.runBeforeWBStartup(Startup.java:39)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:65)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi,
Search for file "plugin_customization.ini" in PDK installation directory. ( C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.java.ide )
open plugin_customization.ini file and for parameter
"com.tssap.config/proxy= " , put 80 at the end and restart the PDK.
80 -->IF you are not using proxy server to hook to internet.
If you are using Proxy server , provide that port number.
plugin_customization.ini=80.
If you are not using the Proxcy server to hook to the internet .. DO THI SSTEP.
Once PDK is opened in the PDK GUI, go to Windows (Menu) --> Preferences --> Workbench --> Proxy Settings --> uncheck the use a proxcy server.
Reply back were you able to solve

Use of __typeof__ in Solaris Studio 12.4

Solaris Studio 12.3 had a __typeof__ operator similar to decltype in C++11. This is available in a portable wrapper using the Boost macro BOOST_TYPEOF_TPL. It looks like the Solaris Studio team contributed the modification to Boost which added this in ticket 5745.
Now Solaris Studio 12.4 has a C++11 mode which supports decltype. However, is __typeof__ still supposed to work in Solaris Studio 12.4's C++03 mode? It doesn't seem to work as well as it used to.
The following program deduces the return type of operator() using __typeof__:
#include <boost/typeof/typeof.hpp>
#include <boost/type_traits/remove_reference.hpp>
#include <iostream>
#include <typeinfo>
// Helper to deduce the result type from a member function pointer.
template<typename T>
struct member_function_result_type
template<typename T, typename R, typename A1>
struct member_function_result_type<R (T::*)(A1) const>
    typedef typename boost::remove_reference<R>::type type;
template<typename T>
struct function_result_type
    typedef BOOST_TYPEOF_TPL(&T::operator()) F;
    typedef typename member_function_result_type<F>::type type;
template<typename R, typename A>
struct function_result_type<R (*)(A)>
    typedef typename boost::remove_reference<R>::type type;
struct my_functor
    float operator()(float numerator) const
        return numerator / 2.0f;
int main(int, char **)
    typedef typename function_result_type<my_functor>::type my_type;
    my_functor f;
    my_type ret = f(5.0f);
    if (typeid(my_type) == typeid(float))
        std::cout << "As expected " << ret << std::endl;
    else
        std::cout << "Oh dear " << ret << std::endl;
    return 0;
If you build this with Solaris Studio 12.3 as follows:
CC -m64 -I/usr/local/include/boost-1_54 main.cc
then it compiles and running a.out shows the return type of float has been correctly deduced.
However, with Solaris Studio 12.4 the same command:
CC -m64 -I/usr/local/include/boost-1_54 main.cc
results in:
"main.cc", line 23: Error: Unexpected type name "F" encountered.
"main.cc", line 42: Warning: "typename" must be used within a template.
1 Error(s) and 1 Warning(s) detected.
Now, obviously Solaris Studio 12.4 has a C++11 mode and it is possible to get this program to work by changing BOOST_TYPEOF_TPL to decltype and building with:
CC -std=c++11 -m64 -I/usr/local/include/boost-1_54 main.cc
But Solaris Studio 12.4's C++11 mode has other problems, so is there any way to somehow get a working __typeof__ or equivalent in Solaris Studio 12.4's C++03 mode?
(In case it makes any difference this is on Solaris 10 x86.)

I couldn't see that any of the items listed in the "Enforcement of C++ rules" section of the documentation would affect this program.
Here's a cut down version of the test program that doesn't use Boost:
#include <iostream>
#include <typeinfo>
// Helper to deduce the result type from a member function pointer.
template<typename T>
struct member_function_result_type
template<typename T, typename R, typename A1>
struct member_function_result_type<R (T::*)(A1) const>
    typedef R type;
template<typename T>
struct function_result_type
    typedef __typeof__(&T::operator()) F;
    typedef typename member_function_result_type<F>::type type;
template<typename R, typename A>
struct function_result_type<R (*)(A)>
    typedef R type;
struct my_functor
    float operator()(float numerator) const
        return numerator / 2.0f;
int main(int, char **)
    typedef function_result_type<my_functor>::type my_type;
    my_functor f;
    my_type ret = f(5.0f);
    if (typeid(my_type) == typeid(float))
        std::cout << "As expected " << ret << std::endl;
    return 0;
Interestingly this doesn't compile with either Solaris Studio 12.3 or Solaris Studio 12.4, but each gives different errors:
Solaris Studio 12.3:
CC -m64 main.cc
>> Assertion: unexpected type_builder::visit_unspec (../lnk/v2mangler.cc, line 1636)
    while processing main.cc at line 39.
Solaris Studio 12.4:
CC -m64 main.cc
"main.cc", line 20: Error: Unexpected type name "F" encountered.
1 Error(s) detected.
So Solaris Studio 12.4 is basically failing in the same way as the original test program that used the Boost wrappers. Solaris Studio 12.3 is failing with an assertion error that doesn't occur when the Boost wrappers are used.
It turns out that __typeof__ was only used in one place in our codebase (wrapped by Boost), so I've just removed it and implemented that code in a different way. So this isn't blocking upgrade of Solaris Studio, and we don't even have __typeof__ in our codebase any more, but I just thought you might be interested to have this program as a test case for future development.
It works fine with clang++ in C++03 mode on Mac OS X so I doubt the problem is caused by the source code not conforming to standard:
clang++ main.cc
./a.out
As expected 2.5
This case may be particularly tricky for a compiler to handle due to __typeof__ being applied to a pointer to a const member function.

Solaris Studio 12.4 ccfe signal 11 with boost::unordered_set in C 11 mode

Using Solaris Studio 12.4 on Solaris 10 update 10 x86, the following program crashes ccfe:
#include <boost/unordered_set.hpp>
#include <string>
int main(int, char **)
    boost::unordered_set<std::string> strSet;
    std::string str("test");
    strSet.insert(str);
    return 0;
Assuming the code is saved to main.cc, build it in C++11 mode using:
CC -v -std=c++11 -m64 -I/usr/local/include/boost-1_54 main.cc
The output is:
### CC: Note: NLSPATH = /opt/solarisstudio12.4/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/opt/solarisstudio12.4/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### -v -std=c++11 -m64 -I/usr/local/include/boost-1_54 main.cc
/opt/solarisstudio12.4/lib/compilers/ccfe -xarch=amd64 -std=c++11 -D__SunOS_5_10 -D__SUNPRO_CC=0x5130 -D__unix -D__SVR4 -D__sun -D__SunOS "-D__builtin_expect(e,x)=e" -D__x86_64 -D__x86_64__ -D__amd64 -D__amd64__ -D_LP64 -D__LP64__ -D__BUILTIN_VA_STRUCT -Dunix -Dsun -D__SUN_PREFETCH -D__SUNPRO_CC_COMPAT='G' -include /opt/solarisstudio12.4/lib/compilers/include/CC/gnu/builtins.h -include /opt/solarisstudio12.4/lib/compilers/include/CC/gnu/builtins-def.h -I/usr/local/include/boost-1_54 -I-xbuiltin -I/opt/solarisstudio12.4/lib/compilers/include/CC/gnu -I/opt/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/ -I/opt/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2//backward -I/opt/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/i386-sun-solaris2.10/amd64/ -I/opt/solarisstudio12.4/lib/compilers/include/cc -I/usr/include -I/opt/solarisstudio12.4/lib/compilers/CC-gcc/lib/gcc/i386-sun-solaris2.10/4.8.2/include// -ptf /tmp/ccfe.1422033660.29374.03.%1.%2 -ptx /opt/solarisstudio12.4/bin/CC -ptk "-v -std=c++11 -m64 -I/usr/local/include/boost-1_54 " -compat=g -xdebuginfo=%none -xdbggen=dwarf+usedonly+incl -xF=%none -xbuiltin=%none -xldscope=global -xivdep=loop -O0 -xarrayloc main.cc -o /tmp/ccfe.1422033660.29374.01.ir 2> /tmp/ccfe.1422033660.29374.02.err
/opt/solarisstudio12.4/lib/compilers/stdlibfilt -stderr < /tmp/ccfe.1422033660.29374.02.err
>> Signal 11:
    while processing main.cc at line 0.
rm /tmp/ccfe.1422033660.29374.02.err
rm /tmp/ccfe.1422033660.29374.01.ir
I know Boost 1.54 is not the most recent version, but the only changes to unordered_set.hpp between 1.54 and the current master branch in Boost's Git repository are Visual Studio 2013 workarounds, so I strongly suspect the same problem would occur with Solaris Studio 12.4 and more recent versions of Boost.
This problem can be avoided by using std::unordered_set instead of boost::unordered_set. However, since the compiler actually suffers a SEGV rather than giving a nice error message I thought I'd report this in case it's a sign of a problem in the compiler that might occur under other circumstances too.

Thanks for the help. Yes, sorry, I should have made clear that this is after trying to use Boost in C++11 mode. I agree that the problem doesn't occur when using Solaris Studio in C++11 mode but Boost configured not to use any C++11 features.
I made quite a few edits to the Boost code, including the ones Steve posted in this thread. The edit that causes this problem to occur is the one to boost/config/compiler/sunpro_cc.hpp that removes all the BOOST_NO_CXX11_* macros.
It sounds like I should just hold off trying to use Boost in C++11 mode until the next version of Solaris Studio is out.
The pstack from the ccfe core dump is:
core 'core.1503' of 1503:       /opt/solarisstudio12.4/lib/compilers/ccfe -xarch=amd64 -std=c++11 -D__
ffff0000 ???????? (8041218, 8, fcf58e0, 0)
082b7713 __1cPtemp_name_substKsubstitute6MrknQfull_syntax_name__1_ (8041260, 8041180) + 163
082be63d __1cKexpr_substKvisit_name6MpnJname_expr__v_ (80413c0, ad65da8, 8041348, 8275d73) + fd
082bc775 __1cKexpr_substKsubstitute6MpknEexpr__p1_ (80413c0, f2cab18, 80413a8) + 35
082b858b __1cPtemp_name_substQsubst_single_arg6MnPtemplate_actual__k1_ (80415d0, 8041b10, f2cab18, 103, 8041570, 0) + 2fb
082b8e10 __1cPtemp_name_substUsubstitute_temp_args6MrknbBtemplate_actuals_collection_pknXtemplate_parameter_list__1_ (8041890, 8041b10) + 150
082ba050 __1cPtemp_name_substPvisit_temp_args6MrknbJsyntax_name_with_template_arguments__v_ (8041b10, fc9dd80, 8041ac0, 8041964) + 30
082ba2c8 __1cPtemp_name_substFvisit6MrknQsyntax_name_impl4eInSsyntax_name_sort_t____v_ (8041b10, fc9dd80, fcf5610, 0) + 18
082b76d1 __1cPtemp_name_substKsubstitute6MrknQfull_syntax_name__1_ (8041bf0, 8041b10) + 121
082b526b __1cPtemp_type_substUvisit_name_dependent6MpnEtype_pnTname_dependent_type__v_ (8041eb0, f2e1aa4, f2e1a58, f2e21f0) + 5b
082b3930 __1cPtemp_type_substTsubstitute_ret_type6MpnJfunc_type__pnEtype__ (8041eb0, f2e2178, 8041d08, 8041d60) + 30
082b3c2c __1cPtemp_type_substKvisit_func6MpnEtype_pnJfunc_type__v_ (8041eb0, f2e21a0, f2e2178, f2e21f0) + 25c
082ba941 __1cPtemp_type_substTexpand_in_func_type6MpnJfunc_type__2_ (8041eb0) + 31
0816b754 __1cIfunc_symRnew_template_spec6kMrknbBtemplate_actuals_collection_rknIposition__pnDsym__ (f2e21f0) + c4
082c941b __1cQtemplate_matcherIgen_func6M_pnIfunc_sym__ (8042050, ad62d58, ad65960, 0) + 59b
0828af3f ???????? (80420f4, ad65940, 80421a0, 0, ad62c50, 0)
0828b2c9 __1cNoverload_call6FpnJcall_expr_rknJsym_array_4brknbBtemplate_actuals_collection_nEtypeKtype_class_b_2_ (8042198, ad65940, 804219c, 80421a0, 0, ad62c50) + 99
08204c38 ???????? (ad65940)
082086ff __1cLtypify_call6FpnJcall_expr_I_pnEexpr__ (ad65940, 4, 0, fd33148) + 9bf
081e36a5 __1cXtypify_dispatch_visitorKvisit_call6MpnJcall_expr__v_ (8042530, ad65940, 0, 0) + 15
081e4529 __1cGtypify6FpnEexpr_I_1_ (ad65940, 4, 0, 0) + c9
082b1e0a __1cJexpr_stmtOpass_thru_expr6MpnEexprHvisitor__v_ (ad659a0, 80425b0, 0, 83bb23e) + 1a
081e3cd1 __1cXtypify_dispatch_visitorPvisit_statement6MpnOstatement_expr__v_ (8042660, ad62b28, 8042608, 83bbbe9) + 71
081e4529 __1cGtypify6FpnEexpr_I_1_ (ad62b28, 0, 8759ec0, fc9b740) + c9
08266956 __1cWstore_inline_func_body6FpnIfunc_sym_pnFscope_bb_pnEexpr__ (fd2fc80, fc9b740, 1, 1) + 426
082700c8 __1cSinline_bookkeepingOprocess_inline6MpnIfunc_sym_pnJcall_expr_pnEexpr__6_ (8d61508) + 268
08270542 __1cSinline_bookkeepingNexpand_inline6MpnJcall_expr_pnEexpr__4_ (8d61508, ad5ecf8, 87594a8, 0) + f2
081e10e3 ???????? (ad5ecf8, 80005, 8043208, 85a44ab)
081d673e __1cWbind2_dispatch_visitorKvisit_call6MpnJcall_expr__v_ (8043220, ad5ecf8, fd1e6b8, fcb9a40) + 9e
081d7662 __1cHbind2erKbind2_body6FpnEexpr_I_2_ (ad5ecf8, 80005, 8043288, 0) + a2
082a94e7 ???????? (ad5ecf8, 0, 0, 0)
082aaaf3 __1cRstmt_bind_visitorKvisit_expr6MpnJexpr_stmt__v_ (8043350, ad5ed58, 80432f8, 804337c) + 93
082a8f2f __1cRstmt_bind_visitorOstmt_list_bind6MpnJstatement__2_ (8043350, ad5ed58, 2211, 7fefefef) + 8f
082b06b5 __1cRstmt_bind_visitorPvisit_statement6MpnOstatement_expr__v_ (8043350) + b5
082a9294 __1cJstmt_bind6FpnOstatement_expr_b_v_ (ad5bef0) + b4
081df9c6 ???????? (ad5bef0, 0, 8043428, 8272a37)
081d6e18 __1cWbind2_dispatch_visitorPvisit_statement6MpnOstatement_expr__v_ (8043420, ad5bef0, 8043448, 8043494) + 98
081d7662 __1cHbind2erKbind2_body6FpnEexpr_I_2_ (ad5bef0, 0, 8043488, 81710d5) + a2
082726f0 __1cSinline_bookkeepingQfinish_expansion6MrnbDfunction_definition_interface_pnEexpr__4_ (8d61508, fd2b46c, ad5bef0, 0) + 160
081e10f9 ???????? (ad4b210, 80005, 8043528, 82759da)
081d673e __1cWbind2_dispatch_visitorKvisit_call6MpnJcall_expr__v_ (8043520, ad4b210, 0, fcb9a40) + 9e
081d7662 __1cHbind2erKbind2_body6FpnEexpr_I_2_ (ad4b210, 80005, 8043578, ad55cc0) + a2
082a94e7 ???????? (ad4b210, 0, 0, 0)
082aaaf3 __1cRstmt_bind_visitorKvisit_expr6MpnJexpr_stmt__v_ (8043650, ad4b270, fd1e668, 874cef8) + 93
082a8f2f __1cRstmt_bind_visitorOstmt_list_bind6MpnJstatement__2_ (8043650, ad4a7b0, 1, 7fefefef) + 8f
082b06b5 __1cRstmt_bind_visitorPvisit_statement6MpnOstatement_expr__v_ (8043650) + b5
082a9294 __1cJstmt_bind6FpnOstatement_expr_b_v_ (ad4a520) + b4
081d6e18 __1cWbind2_dispatch_visitorPvisit_statement6MpnOstatement_expr__v_ (8043720, ad4a520, 8043748, 8043794) + 98
081d7662 __1cHbind2erKbind2_body6FpnEexpr_I_2_ (ad4a520, 0, 8043788, 81710d5) + a2
082726f0 __1cSinline_bookkeepingQfinish_expansion6MrnbDfunction_definition_interface_pnEexpr__4_ (8d61508, fc7b144, ad4a520, 0) + 160
081e10f9 ???????? (ad035e8, 80005, fd1e368, 85a4400)
081d673e __1cWbind2_dispatch_visitorKvisit_call6MpnJcall_expr__v_ (8043820, ad035e8, acffdb8, fcb9a40) + 9e
081d7662 __1cHbind2erKbind2_body6FpnEexpr_I_2_ (ad035e8, 80005, 8043878, 0) + a2
082a94e7 ???????? (ad035e8, 0, 0, 0)
082aaaf3 __1cRstmt_bind_visitorKvisit_expr6MpnJexpr_stmt__v_ (80439c0, ad03648, ad03668, 8759ec0) + 93
082a8f2f __1cRstmt_bind_visitorOstmt_list_bind6MpnJstatement__2_ (80439c0, acf9468, 0, 82d7323) + 8f
082afb6b __1cRstmt_bind_visitorWvisit_function_variant6MpnNfunction_stmt_b_v_ (80439c0, ad04358, 1, 8043a30) + 46b
082afe10 __1cRstmt_bind_visitorOvisit_function6MpnNfunction_stmt__v_ (80439c0, ad04358, ad04378, 8759ec0) + 40
082a916f __1cUstmt_bind_and_expand6FpnJstatement__1_ (ad04358, 3, fc55f4b, 80443c4) + 11f
08257545 __1cMfunc_contextJpostamble6MrnbDfunction_definition_interface_pnNfunction_stmt__v_ (871cc98) + d5
082e879d __1cTimmediate_func_body6FpnIfunc_sym__v_ (fbd3840, fbd3390, 8044dd0, 821b71f) + 3fd
08266428 __1cMparse_inline6FrnbDfunction_definition_interface__v_ (fbd385c, fbd38cc, 8044eb0, 95a38d4) + 188
084db8c8 __1cLemit_inline6FpnIsym_list__v_ (fca5328, fca5328) + 2d8
084d88f1 __1cQcompilation_unitFclean6M_b_ (8759310) + a1
084dd507 __1cIfinalgen6F_v_ (8c3ffa8, 8759178, 8046eb8, 815db68, 1, 8c41eb8) + 67
082f533b __1cGanalys6Fb_v_ (1, 8c41eb8, 8046eb8, 815d5d7) + db
0815db68 __1cHtmcplus6Fri0bpnHoptions__nHsym_set__ (8046f00, 8046ef8, 8046efc, 1, 8c4ced8, 86417b1) + 2be8
082e5943 main     (34, 8047360, 8047434) + 283
08153f22 _start   (34, 8047514, 804753e, 804754b, 8047556, 8047565) + 72

Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone fail

Problem:
Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone failed
But I didn't have any issue with the same pkg in Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as <SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall: /opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error] ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone that didn't have any local zone
thanks in advance

Problem:
Install NetConnect in Global Zone of Solaris 10 x86
with 5 local zone failed
But I didn't have any issue with the same pkg in
Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as
<SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying
the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall:
/opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete
successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the
installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error]
ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone
that didn't have any local zone
thanks in advance
[I believe that it does not work in x86, watches with pkginfo - l SUNWsrspx, in the platform.
Willy Suarez
Sopport UNIX
Colombia/code]

I can�t install Sun Studio 11 in Solaris 8

Hello!!
We are trying to install Sun Studio 11 on our Server.
The server is running under Solaris 8, we install J2SE 1.4.2_10 SDK prior to run the Sun Studio installer, but when we run the installer, it report the following error
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code
Some one has any idea?
Thank you in advance.
PD: Sorry for my English, I�am a beginner English student, please be pacient.

i've installed java 1.5.0b06 and I can install SUN Studio 11 in Solaris 8
feedback:
==========================================================
# echo $PATH
/usr/j2se/jre1.5.0_06/bin:/usr/j2se/jre1.5.0_06:/usr/sbin:/usr/bin
# java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
==========================================================
but when i try to install
==========================================================
# ./installer -nodisplay
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:472)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code)
===============================================================
so i am confused or maybe i have to install 1.4.2.10??

Problem Installing Solaris Studio 12.X on Solaris 11.2

Similar Messages

Maybe you are looking for