Problem installing SP2 for WL 6.1 URGENT!
Hello:
I have installed the sp2 in my machine (Win 2000 Pro) and i hadn't any
trouble, but when I try to install it in the server (Win NT) I only can view
the Anyware welcome screen, and I press "NEXT" button but there is no
response, at last "DONE" button is available, but no sp2 are instaled.
Any idea?
Hi, I'm elveru again.
I've can install it using the silent instalation mode described in the
reference.
Thanks.
"elveru" <[email protected]> escribió en el mensaje
news:[email protected]..
Hello:
I have installed the sp2 in my machine (Win 2000 Pro) and i hadn't any
trouble, but when I try to install it in the server (Win NT) I only canview
the Anyware welcome screen, and I press "NEXT" button but there is no
response, at last "DONE" button is available, but no sp2 are instaled.
Any idea?
Similar Messages
-
I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?
Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
Mylenium -
Hi Everyone,
I want to install sp2 for sql server 2012, My sql server 2012 instance is installed in cluster mode.
Please suggest the best practice to install sp2 , what are prerequisite and recommendation.
Please share installation guide for sp2 in cluster instance, if any one have.
Thanks All
AdityaDid you searched a bit before posting question.
Please read
https://support.microsoft.com/kb/958734?wa=wsignin1.0
http://blogs.msdn.com/b/john_daskalakis/archive/2014/09/05/how-to-install-a-service-pack-at-a-sql-server-2012-failover-instance-best-practices.aspx
http://blogs.msdn.com/b/jason_howell/archive/2012/08/28/how-to-patch-sql-server-2012-setup-with-an-updated-setup-package-using-updatesource-to-get-a-smart-setup.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Problem installing drivers for on-board Realtek sound
Using Neo2
I keep getting the following error when Windows XP tries to install the driver:
"Cannot Install this Hardware
There was a problem installing this hardware:
Realtek AC'97 Audio
An error occurred during the installation of this device
The data is invalid"
I've tried all the usual stuff of ensuring that the software is installed prior to the PnP wizard. I've even tried installing the NT4 (non-PnP) drivers (which installed ok and appeared to work, except that the sound device wasn't recognised).
I've tried the latest patch to no avail. Is my H/W knackered?
Any input gratefully received.
Cheers,
/DAhem,
I thought what I had specified was relevant to the query, but here goes:
-Motherboard type and model - MSI K8N Neo2 Platinum (939)
-Bios type and revision (AMI rev 1.9) - Phoenix - AwardBIOS v6.00PG Version : Nvidia - 42302e31
-CPU type and model - AMD Athlon(tm) 64 Processor 3000+ (939)
-Memory name, model and quantity - not sure but 3200, 2x512Mb Generic. Seems stable
-Video card name and model plus drivers and version - Hercules 3D Prophet 9600/9600Pro Series (SE) Driver Version : 5.2.3790.2
-Power Supply name, model and the amp rating for the +3.3V, +5V and +12V lines plus any limitation on the +3.3/+5V combined watts. This information can be found on a sticker on the side of the supply. - sorry but I haven't got the time to open the case up. It's a decent 400W jobbie. I've previously checked the various voltages and they seem OK.
-Hard Drives: Manufacturer, type and size and which IDE or SATA ports they are located on WDC WD800JB-00ETA0 (Sata 6) MAXTOR 6L040J2 IDE 1 (master)
-Optical Drives: Manufacturer and type and which IDE ports they are located on CDROMLITE-ON_LTR-48125S______________________1S05____\5&1DE79660&0&0.0.0 on 2nd Ide master
-Operating system and service pack level - WinXP SP1 and hotfixes. -
Problem installing ODAC for Oracle Server 11g
I have installed Oracle Server 11g (OS:Windows XP)
Questions:
1. I tried installing ODAC for Oracle Server 11.1.0.6.21, then its giving the following error message: "Oracle data access components can only be installed over an existing oracle server 11g".
2. We have a Monorail application running on NHibernate using ODP.NET. It's working perfectly when I run it on my Visual Studio 2008.
But, when I tried to host this application, it gave me the following error message: "The provider is not compatible with the version of Oracle client"
Please suggest how to resolve these issues.Hi
Could that be related to the %ORACLE_HOME% ?
I've read that on the ODAC installation guide:
On a machine without Visual Studio .NET 2003 installed, ODAC products now work if they are installed in a new Oracle Home
So it should be performed in a new %ORACLE_HOME% and not the same as the database. Please change that and retry.
Source:
http://www.oracle.com/technology/software/tech/windows/odpnet/install11106.html
On your second question :
Q: I get an error: "Unable to load DLL (OraOps.dll)". How do I fix this?
A: First, ensure the OraOps.dll file is in your Oracle bin directory (e.g. d:\oracle\ora92\bin\). Next, check that your Oracle bin directory is in the Windows system path. If either of these are not present, re-install ODP.NET. Depending on the application, you may have to restart the application (e.g. Windows Service) or reboot the computer (e.g. ODP.NET install makes changes to the PATH) for ODP.NET installation to be complete. If your ODP.NET installation is still not working, you may be running into this problem.
Source:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html#DLL
Let us know if it helps?
thanks
Edited by: Hub on Oct 23, 2008 9:30 PM -
Problems installing Toolkit for CreateJS
I’m trying to install Toolkit for CreateJS 1.2 for Flash CC. When I use Extension manager CC, I get an error that says extension cannot be installed, it requires Flash version 12 (CS6). I can only download Flash CC not Flash CS6. How can I get Toolkit for CreateJS for Flash CC or how can I download Flash CS6?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
If you want to purchase a CS6 product:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html -
Problems installing Python for S60 v2.0
When I try to install Python for S60 v2.0 (from the program update on the phone) I get this error:
1 update could not be installed. Close some programs and try again.
But I don't have any other open programs!
I have Nokia N78
Message Edited by Mikaelft on 21-Dec-2009 12:46 PMPython is not an app, it's an operating programme, like Flash or Java, you won't get an icon. By the way, why do you want Python ? I have it and it makes a novelty Beer programme fill screen then empty when tilted ! Only bothered with it because I have a mate who thought his fruit based product was the best thing since sliced bread, worry about Python if you find something you really want that requires it to work !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
Problems installing Skype for Windows Desktop on my 8.2 system
My Windows 8.1 computer is telling me the Skype app has changed so I must uninstall and re-install Skype for Windows Desktop. I duly did this but I cannot access Skype, it won't accept my Skype name and password combination. Three times I have gone through the process to change my password, which takes me through the process of changing my Microsoft account password because I had to create one when I bought my computer and link absolutely everything to it. This still doesn't solve the issue and I have now reached the end of my tether with Windows 8.1. It's been nothing but trouble, completely non-user friendly and I am not a dim wit when it comes to technology. What must I do to be able to access Skype?
I've downloaded Skype Translator & that works on my tablet. Why on earth did they 'break' the normal version of Skype?
-
Problems installing iTunes for windows
Hi,
Just bought a lovely 30Gb black ipod video...however i cannot seem to install iTunes. The route of the issue seems to be that I have Sonic Record Now cd burning software installed already on my machine (straight from the shop).
When uploading for the first time using both the disc and from apple.com I got an error messages that said I had a conflict within the registry, something to do with my previously installed CD burning software - please re-install iTunes. When i removed iTunes my CD drive disappears and i have to do a system restore.
I have tried this a few times with no success - so decided to try and remove the Sonic Record Now programme...when i used the disc after this I just got a standard error message "iTunes has encountered a problem and has to close"....
I have not yet managed to download from apple.com again because i don't have internet at home...but I would imagine that i'll simply get the second error message again as above - i am really getting frustrated.
I gather its not an isolated problem - and have seen a few solutions but all of these seem to depend on a successful download of iTunes from apple.com - something that i can't yet do because of the registry conflict.
any ideas?
thanks
Mike.Have you seen this?
http://docs.info.apple.com/article.html?artnum=93976
Also you might try just a quicktime standalone install.
http://docs.info.apple.com/article.html?artnum=93976 -
Licensing problems installing JDriver for MS SQL Server
I've been having problems for some time now creating a connection pool in WL 5.1 using the MS SQLServer4v70 JDriver. I am at wits end and haven't been able to find a solution or find anybody that could give me a solution. Below is a better description of the problem including exact error messages and configuration.
There's some simple problem here, but I'm not an
installation expert. Would you please post this to
the support.install group? If you don't get help
quickly from there, let me know.
JoeAt 09:54 AM 10/31/00 -0800, you wrote:
Here's the exact error message:
Tue Oct 31 09:52:09 PST 2000:<I> <WebLogicServer> IIOP subsystem enabled.
weblogic.common.LicenseNotFoundException: Could not find licensing file:
Your WebLogic license file, named either WebLogicLicense.xml or
WebLogicLicense.class must be located in a directory that is
in your CLASSPATH. By default, your license file is located in the
/license directory located in your WebLogic home directory
(the root directory of your WebLogic installation).
As of version 4.0 of WebLogic, a new XML-format license file has
replaced the older, compiled class format license file.
The WebLogic Server will recognize either format.
For additional information on WebLogic licenses or on setting your
classpath, see the i
stallation instructions in the WebLogic Server documentation, available at
http://e-docs.bea.com/
my weblogic class path looks like:
CLASSPATH Prefix c:\weblogic\mssqlserver4v70\classes
CLASSPATH
c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\lib\tools.jar;c:\jdk1.3\jre\li
b\rt.jar;c:\jdk1.3\jre\lib\i18n.jar;C:\weblogic\license;C:\weblogic\classes\
boot;C:\weblogic\cla
sses;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\eval\cloudscape\lib\cloudsc
ape.jar
JAVA_HOME c:\jdk1.3
WEBLOGIC_LICENSEDIR C:\weblogic\license
WEBLOGIC_HOME C:\weblogic
system properties:
java.security.manager
java.security.policy==C:\weblogic\weblogic.policy
weblogic.system.home=C:\weblogic
java.compiler=symcjit
weblogic.class.path=C:\weblogic\license;C:\weblogic\classes;C:\weblogic\myse
rver\serverclasses;C:\weblogic\lib\weblogicaux.jar
INITIAL_HEAP 64 MB
MAX_HEAP 64 MB
SERVERCLASSPATH
c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\jre\lib\rt.jar;c:\jdk1.3\jre\l
ib\i18n.jar;C:\weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudsc
ape.jar
Type "wlconfig -help" for program usage.
The license file is attached:
-Matt
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, October 31, 2000 8:41 AM
To: Matthew Heaton
Subject: RE: Problems creating connection pool
At 04:35 PM 10/30/00 -0800, you wrote:
Still having problems with it not finding the licenseOk, what is the exact failure message? Does the server start fine?
Then it's finding the server license in the weblogiclicense.xml file.
Is it then failing to find the driver license? If so, show me your
editted xml license file.
Joe
Currently nothing related to the driver is in my classpath and
c:\weblogic\mssqlserver4v70\classes is in my weblogic classpath. I deleted
the license folder for the driver after moving the guts of it into the main
weblogic license file.
-Matt
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, October 30, 2000 3:46 PM
To: Matthew Heaton
Subject: Re: Problems creating connection pool
Hi Matt.
You did the right thing adding the driver to the weblogic.class.path.
That's where it should be, not in the java.class.path. The current
licensing issue is that the weblogic server has(had?) it's own copy of
WebLogicLicense.xml, containing the server licenses. The one from thedriver
is now in the path. It contains the driver license, but not the server
stuff. Edit the server one, adding the guts of the driver one, and
delete the driver xml license file from your path.
Joe
Matt Heaton wrote:
This is a problem that has been a roadblock for me for a while, I'm usingWL 5.1 and trying to create a connection pool with the MS SQL server 4v70
JDriver.
Here is the code to create the connection pool:
weblogic.jdbc.connectionPool.SQLPool=\
url=jdbc:weblogic:mssqlserver4:MATTHEWH1:1433,\
driver=weblogic.jdbc.mssqlserver4.Driver,\
initialCapacity=1,\
maxCapacity=2,\
capacityIncrement=1,\
props=user=AceUser;password=AceUser;server=MATTHEWH1
I've addedc:\weblogic\mssqlserver4v70\classes;c:\weblogic\mssqlserver4v70\license to
my class path, but I was getting a class not found exception when Weblogic
tried to make the connection pool. I then added
c:\weblogicmssqlserver4v70\classes to my Weblogic classpath and got the
following error:
weblogic.common.LicenseNotFoundException: Could not find licensing file:
Your WebLogic license file, named either WebLogicLicense.xml or
WebLogicLicense.class must be located in a directory that is
in your CLASSPATH. By default, your license file is located in
the
/license directory located in your WebLogic home directory
(the root directory of your WebLogic installation).
As of version 4.0 of WebLogic, a new XML-format license file has
replaced the older, compiled class format license file.
The WebLogic Server will recognize either format.
For additional information on WebLogic licenses or on settingyour
classpath, see the in
stallation instructions in the WebLogic Server documentation, available
at
http://e-docs.bea.com/
So I tried adding c:\weblogic\mssqlserver4v70\license to the weblogicclasspath and got yet a different error:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : C:/weblogic/license/WebLogicLicense.xml
However Unable to start because :
No License found for WebLogic
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3
WebLogic Server terminated with an abnormal condition of 1
What do I do? I've tried everything I can think of, I was able to getthis to work the first time that I tried to do it but everytime I've tried
since then this happens.
-Matt--
PS: Folks: BEA WebLogic is in S.F. with both entry and advanced positions
for
people who want to work with Java and E-Commerce infrastructure products.
Send
resumes to [email protected]
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application
Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component
Architecture
http://www.bea.com/press/awards_weblogic.html
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application
Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component
Architecture
http://www.bea.com/press/awards_weblogic.html
Attachment Converted: "c:\eudora\attach\WebLogicLicense11.xml"
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component Architecture
http://www.bea.com/press/awards_weblogic.htmlEric Ma wrote:
Joe:
Connection is a LOCAL variable declared in each method. DataSource is an instance
variable.That sounds fine... let me see your code (main block plus finally block). How long does this
take to reproduce? Show me your pool definition.
thanks,
Joe
>
>
Eric
Joseph Weinstein <[email protected]> wrote:
Eric Ma wrote:
I was given the unfortunate task :-) of getting data out of M$FT SQL6.5. I set
up a JDBC connection pool using jDriver in mssqlserver4v65.jar, andcreated a
JDBCDataSource for the pool. I am using a stateless session bean +JDBC (with
the DAO pattern) to get data. In the DAO class I have an instancevariable for
the datasource, which I look up in the constructor. In the DAO's businessmethod
I RELIGIOUSLY call datasource.getConnect() first, and ALWAYS call connection.close()
in the finally block. Now the initial requests are fine, but aftera while I
got a weblogic.common.ResourceException telling me there were no moreconnection
available in the pool. Is this a jDriver bug? I never run into sucha problem
with an Oracle connection pool using the thin driver.
Any insight will be greatly appreciated.
Eric MaHi. Is the connection object an instance variable? That would be a problem.
The connection object has to be a method variable to be safe from multithreading
issues.
Joe -
Issue Installing SP2 for Windows Server 2008 SP1
Hello, I have a very annoying issue, and I hope someone can help a bro out.
Server: Windows Server 2008 SP1 64-bit
Issue: SP2 wont install on Windows Server 2008 SP1
This is what I am seeing when I check the event viewer:
1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated.
What I have done so far:
I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
in the system.
Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
(Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
~I will provide any further info if needed.Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
so I wasnt for shore what relevant data pertained to this issue):
I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
CBS failed. However, I have no clue where to go after that..
WindowsUpdate.log:
2015-02-22 19:24:15:093
940 d10
AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:093
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:24:15:106
940 1538
DnldMgr *************
2015-02-22 19:24:15:107
940 1538
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:24:15:107
940 1538
DnldMgr *********
2015-02-22 19:24:15:107
940 1538
DnldMgr * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Updates to download = 1
2015-02-22 19:24:15:107
940 1538
Agent * Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
2015-02-22 19:24:15:108
940 1538
Agent * UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
2015-02-22 19:24:15:108
940 1538
Agent * Bundles 2 updates:
2015-02-22 19:24:15:108
940 1538
Agent * {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
2015-02-22 19:24:15:108
940 1538
Agent * {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:15:108
940 1538
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2015-02-22 19:24:15:108
940 1538
DnldMgr Contacting regulation server for 2 updates.
2015-02-22 19:24:15:109
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:119
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:123
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:131
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:134
940 1538
DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2015-02-22 19:24:15:135
940 d10
AU # Pending download calls = 1
2015-02-22 19:24:15:135
940 d10
AU <<## SUBMITTED ## AU: Download updates
2015-02-22 19:24:15:644
940 1538
DnldMgr * Regulation call complete. 0x00000000
2015-02-22 19:24:15:661
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107] ***********
2015-02-22 19:24:15:732
940 1538
DnldMgr * All files for update were already downloaded and are valid.
2015-02-22 19:24:15:732
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107] ***********
2015-02-22 19:24:15:733
940 1538
DnldMgr * Queueing update for download handler request generation.
2015-02-22 19:24:15:733
940 1538
DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:16:095
940 1538
Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
2015-02-22 19:24:16:095
940 1538
Handler Selected payload type is ptExpress
2015-02-22 19:24:16:124
940 1538
Handler UH: DpxRestoreJob returned 0x80070002
2015-02-22 19:24:16:124
940 1538
Handler Detected download state is dsHavePackage
2015-02-22 19:25:32:077
940 dcc
AU AU received policy change subscription event
2015-02-22 19:26:21:898
940 d40
Handler FATAL: CBS called Error with 0x80070002,
2015-02-22 19:26:21:899
940 1538
Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Error source is 106.
2015-02-22 19:26:21:909
940 1538
DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
2015-02-22 19:26:21:909
940 1538
DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
2015-02-22 19:26:35:006
940 1538
Agent *********
2015-02-22 19:26:35:006
940 d10
AU >>## RESUMED ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
2015-02-22 19:26:35:007
940 1538
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:26:35:007
940 d10
AU # WARNING: Download failed, error = 0x80070002
2015-02-22 19:26:35:007
940 1538
Agent *************
2015-02-22 19:26:35:007
940 d10
AU #########
2015-02-22 19:26:35:007
940 1538
Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
2015-02-22 19:24:15:004-0500 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 2 updates.
2015-02-22 19:26:35:008
940 d10
AU ## END ## AU: Download updates
2015-02-22 19:26:35:008
940 d10
AU #############
2015-02-22 19:26:35:008
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:26:35:008
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:35:009
940 1538
Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
2015-02-22 19:26:22:129-0500 1
161 106
{D0ABB478-FFD1-448A-9058-939C0B427AD4}
107 80070002
AutomaticUpdates Failure
Content Download Error: Download failed.
2015-02-22 19:26:35:181
940 1538
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-22 19:26:35:181
940 1538
Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
2015-02-22 19:26:35:182
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:40:009
940 1538
Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
2015-02-22 19:26:35:009-0500 1
188 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on Monday, February 23, 2015 at 3:00 AM: - Security Update for Windows Server 2008 x64 Edition
(KB2507618)
2015-02-22 19:26:40:009
940 1538
Report CWERReporter finishing event handling. (00000000) -
Problems installing license for V7 - registration host != license host
Hello All,
I am currently trying to install the license key for a V7 Redwood installation on my PC.
(Windows XP, Oracle XE 10g, Redwood V7.0.3)
When I install the license key through the config program it appears to work, but when I check the config.log it says "Registered without licenses.". I was wondering if this was to do with the registration host and the license host being seen as a different machine by the config tool? They are the same host, but the license host refers to the machine using the fqdn.
The register.txt file contained the following lines
On license host: N
Registration host: mypchostname
License host: mypchostname.mydomain.corp
Database host: mypchostname
"show license" from within Redwood Shell gives the same "Registered without licenses" text.
When I try and connect (just in case) from Redwood Explorer it says "No Redwood license installed".
Anybody else encountered (and solved) this problem?
Regards
GuySimon,
Thanks for your response.
Unfortunately I haven't received a new license key yet to try installing the license through RS, but I realised why I was getting the following error when I'd tried to set the license host before - the jcs_listener wasn't running!
RS> set license host mypchostname
JCS-00502: OS error: No connection could be made because the target machine actively refused it.
JCS-00342: could not open socket to Network Agent on host mypchostname, port 1529
JCS-00332: cannot obtain hardware ID
After starting the jsclistener it happily allows me to set the license host however when I try the register force command the resulting register.txt file still has the fqdn. I'm going to try and temporarily disable some of the DNS settings on my pc to see if I can stop it performing a lookup when creating the register.txt file.
regards
Guy -
Problem installing realplayer for radio listening
Hi everyone. I'm trying to help my mum to listen to bbc radio programmes on her mac. I'm not an expert by any means, but have downloaded the realplayer system onto her computer. The download goes okay, and the logo appears on the computer menu, but once we have opened a radio programme for bbc radio 4 and try to commence listening, a window pops up saying that realplayer has to be downloaded first. I don't know what I am doing wrong. If anyone could explain a method of getting realplayer to work, or any other way to listen to radio programmes on the mac, my mum and I would be grateful. As I say, I am not an expert,so if any explanations could be in very simple terms, that would be great. Many thanks.
Mac Mac OS X (10.3.2)
Mac Mac OS X (10.3.2)hi matt
Apologies for taking so long to reply - i am over at my mum's again for the first time since posting the original message. In answer to the queries in your message:
1) The version of the Mac is, in fact, 10.2. I have tried, as you suggest, to update via the appropriate tools on the Mac to a higher version but no success - the software update doesn't contain any options. Is t here any way forward on that?
2) The browser is Safari - I haven't as yet quit the browser (does that mean using another browser to open the internet to access the realplayer download tools?) and tried to instal realplayer, but will proceed to do that.
3) The realplayer logo is on the desktop under the name realplayer, but I have checked and it is not in the Applications folder. Is that an error, meaning that it won't work? How does one install it into the applications folder if that is necessary?
I hope this is clear enough. Any further advice/suggestions/help would be much appreciated on the problem of getting to listen to radio programmes vis the Mac.
benedict -
Problems installing drivers for my pretty old soundcard. (Thread detailed).
Hello, my friends audio card for some reason stopped to work, so I gave him my old card. Unfortunately, I have lost my CD.
(And yes, I have read the sticky thread Sound Blaster FAQ).
Here is what I did:
Wrote all information that might get useful from card to PC, result:
Creative Audio
EMU0k-NEF
Tech 97
oo0E3020
CT4830
32GPC05D98A
The bolded like "CT4830" seem to be the only useful word I managed to get from my card.
Then it was searching, a lot of googling, a lot of sites trying to offer their perfect "driver scanner", if I searched for etc EMU0k, scamming and virus sites would automatic manage to track the exact component I was looking for. While creative.com wasn't even top 50.
Back to point: I went on creative.com, I personally think it is a very messy site, I click on support, download, and I see a list of products, I choose Sound Blaster, and I get a few models to pick from.
Now here I was stuck for a long time, I could not find my model there, it was only those new "awesome" models, so I had to find a little, almost impossible noticeable link at the bottow "cant find your model, click here" something like that. With small letters. NOT VERY USERFRIENDLY!
And then I get to a list, I know, I have model CT4830, and I know "Audigy" is written on the card. But I could not find it in any of the audigy categories, some categories was missing images, so this was also a very tricky part.
Then I found a list which could help me get the full name of my audio card, and I managed to catch up that CT4830 for some reason has the full name "Sound Blaster Li've! Value/Player Compaq /Intel/IBM/NEc"
And this helped me a little (I think), since I had to look in the Li've category, even though it also was Audigy, it was not stated in the full name of the card.
Now I found the most similar thing in "li've" category, called "Sound Blaster li've! Value". Nothing about compaq, intel IBM or nec or anything like that, just Sound blaster li've! Value.
I downloaded the driver, released in 2003, I had an option to go for 2005 64bit XP driver, or 2003 driver (no OS mentioned in describtion), I assume the driver was for 32bit, since there was already another newer stated driver for 64bit.
I managed to install this driver, it runs fine, no error messages occurs in the installation.
It asks me to reboot, and I reboot, and on next startup, still nothing happens.
So after all this research, what have I done wrong? Wrong driver? Which is the correct driver? Where can I download it's
I am sorry for my frustrating behavior on this post, sorry, I just don't know what to doO You can find some of the original installation CDs in ISO form on Badboy's FileFront site. I believe this one is for your SB Li've value card as well as for some Audigy cards. These are for WinXP and older OSs.
-
HT1926 Problem Installing iTunes for Windows 7
I get the message "Service 'Apple Mobile Device' failed to start when trying to instal. 'Verify you have sufficient priviledges to stsrt system.
Options given are Abort, Retry or Ignore.
Both Retry or Ignore give error message 'iTunes was not installed correctly. Error 7 (Windows error 14001).
iTunes will not open.
Please help !Hello Paul,
Sorry to hear that iTunes is not installing on your computer. I found a couple of articles I think may help with the error messages you are seeing.
I recommend starting with these steps:
Remove and reinstall iTunes and AMDS
If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
Windows XP
Windows Vista or Windows 7
Restart the computer.
Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
Restart the computer.
Start iTunes and connect the device. It should be recognized properly in Windows.
You can find the full article here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If you are still getting "Error 7" when trying to do this, I recommend following the steps in this article:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
When I'm syncing my phone to my laptop, how can I stop it from adding a backup album back to my phone?
-
Why cant I use my lights in the render future in PS CC
I am having trouble with the 3D feature and the Lights in the render feature in PS CC. I have contacted the Technicians on a number of occasions and each time they say its my Graphics card. My PC is only months old and the firm that built it has ch
-
Java.lang.NullPointerException in DataCacheManager
java.lang.NullPointerException at kodo.datacache.DataCacheManager.<init>(DataCacheManager.java:43) at kodo.conf.JDOConfigurationImpl.getDataCacheManager(JDOConfigurationImpl.java :1356) at kodo.runtime.PersistenceManagerFactoryImpl.getPersistenceMana
-
I am going to write a software which is very similar as the PC game "Football manager 2005", the user can store the data into the database , also they can check every player's attributes. The interface is made by Java Swing. Could anyone tell me is J
-
Hi I want to know the Complete Events in Classical and Interactive Reports.Please tell me the concepts .And what their differences. Please tell me Thanks & Regards Raghava