Problem installing StatsPack from OEM

Every time I try to use 'Monitoring Configuration' to install StatsPack: It asks for SYS password - I give it the correct password - then it says "Invalid Username/Password - Login Denied" - every time, on any db or host (hosts are Solaris).
Any help?

Its needs to be in an orapwd file on the server ..
from the server...
orapwd file=$ORACLE_HOME/dbs/orapw<SID> password=<yoursyspassword> entries=5
You may need a bounce for it to recognize the file.
The way to test this is to try and connect as sysdba from a client - like sqlplus or sqldeveloper.

Similar Messages

Problem installing Mavericks from my recovery partition of my computer

I don't know what's going on but for some reason each and every time I try to install mavericks from my recovery partition I get an error saying "OSX Mavericks failed to download" , then the text underneath that said "Use the purchases page to try again". This creates a problem for me because I can not access the Mac AppStore since I whipped my MacBook clean with the os along with it and am trying to clean install mavericks. So I was wondering how do I fix this because I am beginning to get extremely ****** off and frustrated.

Hi
I want to install mac osx Mavericks on a seagate internal raw hard . I downloaded "RecoveryDiskAssistant" and install it in a usb drive, before installing I made partition for new harddisk , and I stadted to install it through internet without problem,
But after 10% it says: ""Use the purchases page to try again"" . and after clicking okey it`s installing bar doesnt go forward(Most comments which I found was about app strore but in this step I have no access to app store) . could you please help me what to do?

Problem installing 0SALES_UNIT from Business Content

Dear Friends,
I have tried to install 0SALES_UNIT from the business content but it does not appear under the InfoObjects tab.
What could be the problem?
When i try to install it, the system shows that an active version of the object already exists. I have tried to install it inspite of the existing active version and also get a green signal. Thanks for all the help in advance.
Raj

Raj,
Here is the solution to this problem.
You have successfully activated the infoObject but do not see it under the infoObject list. This happens due to inconsistencies in the RSDIOBCIOBJ table. To solve this error, go to SE37 and execute the RSDG_IOBC_REORG function module. Put in the following parameters.
I_IOBJVERS -
> A
I_PROGRESS -
>
I_IOBJTP -
> *
I_ALL_IOBJ -
> X
I_T_IOBJNM -
>
I_BYPASS_BUFFER-->
Press F8 to execute.
Then go to RSA1 and you should find your infoObject.
Don't forget to assign points!!!
Abdul

Problem installing ArchLinux from hdd partition

I have a SATA drive mounted on a VIA Epia motherboard, but no CD drive, which is why I install directly from hdd.
Currently I have Zenwalk running, which only has Lilo (no grub even in the repos!!!). I copied to contents of the install ISO to a new ext3 partition and used the following entry in lilo (taken from this guide):
image=/root/tmp/isolinux/vmlinuz
label=ArchInstall
initrd=/root/tmp/isolinux/initrd.img
append="root=/dev/sda4 BOOTMEDIA=cd"
But it doesn't boot properly. It says:
::Initramfs Completed - control passing to kinit
IP-config: no devices to configure
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kinit: Mounted root (ext3 filesystem) readonly.
kinit: init not found!
Kernel panic - not syncing: Attempted to kill init
..and before all that it complains that it doesn't find anything new in /config and /packages, but these directories aren't suppose to exist, I guess, because they don't on the original iso?
Anyways, it looks like it's mounting /dev/sda4, but then dies because the init part isn't found. I had a problem with lilo warning me that the init ram image was too large, but then I added the "large-memory" option to lilo.conf and it stopped complaining.
Thanks for reading,
Benjamin

I found a solution!
Aparently syslinux is very good for booting anything made with isolinux. I think it's pretty universal. So what you do is simply to mount the iso, copy the contents to a fat 16 partition, rename the isolinux.cfg to syslinux.cfg and then run syslinux on the partition. It's described on this blog:
http://www.elfenbeinturm.cc/2007/08/09/ … kpad-x60s/
/ Benjamin

I had a problem installing Safari from my install disc

Hi,
A few days ago I posted a message that the Safari download would not recognize that I had 10.5.5 on my machine, and someone suggested that I re-install it from the discs that came with it. I did install something but apparently not Safari. I don't want to open up the Leopard re-install because I don't need Leopard, I just want the Safari, so now what do I do?
Thx

Welcome To  Discussions SHRiley!
Is this the Mac OS X 10.5.5 Combo Update. you are using?
If not, download that.
Run Repair Permissions.
Install that Combo Update.
Again run Repair Permissions.
ali b

Problem installing stuff from software pack N95, m...

Hi,
I bought a Nokia N95 few days ago.
I have success fully installed PC suite.
But,
when I try to install stuff from the "Software Pack CD" it gives me error about missing "MSVCR80.dll".
Can some one tell me how to fix.
I went back to the shop and got the CD changed, but it didn't help.
Also please tell me how can I use Navigation on N95. Do I have to buy the liscence from nokia or there is some other way.

Hi lafanter
Is your Windows NET 2.0 or 3.0 Framework OK?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Multiple problems installing upgrade from CS5 Design Prem. to CS6 Design Prem.

I had started a thread a few days ago regarding problems that I was having while installing my upgrade from CS5 Design Premium to CS6 Design Premium. Everything seemed to install fine with the exception of Acrobat X Pro. http://forums.adobe.com/message/4716847#4716847
I thought that I had resolved the issue through tech support, but apparently not. First of all, they had me install the trial version of Acrobat X which actually let me install with no errors. A couple of days passed and Acrobat asked if I would like to continue my trial or enter a serial number. I tried to use my serial that came with my upgrade but it rejected it, so I opted to continue the trial. Then earlier today as I was working in InDesign, upon launching I got a script error message.
Error in C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS6\Flash\Flash-12.0.jsx
Line 153: if( app.name = = flashAppname && (module.name = = 'DefaultScript' II module.name = = 'Flash'))
Cannot open resource file.
After clicking OK it seemed to open InDesign fine and I was able to open files and go about working. While working I noticed that I had no effects in the dropdown menu under 'Object'. Tried the shortcut for them and nothing happened. I have yet to try to open any files containing effects (drop shadow or something) but am guessing that they will not work. My next course of action was to try to Uninstall and Re-Install. I removed CS6 and Acrobat X Pro from my computer and ran the Creative Suite Cleaner program. Then instead of installing the upgrade from the DVD, I decided to download the program from the Adobe LWS and give that a go thinking that maybe the download files are more up-to-date than the DVD that I recieved. Now it seems I am back to square one with the same problems (InDesign missing 'Effects' and who knows what else, and Acrobat X Pro failed to install), but this time I have diffent errors on the "error summary file" that shows up as a link in the "Installation Complete" dialog box. Sorry for being windy, but I really need to get this resolved. Thanks for any and all input. PC is Dell Precision T3500 running Windows 7 and is current on it's updates.
Here is a copy of the errors from that page:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF012, DS013 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 5 warning(s)
WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Locale\fr_FR\AcroIEFavClient.FRA. Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Locale\fr_FR\AcroIEFavClient.FRA. Verify that you have access to that directory.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Jon\Desktop\Adobe CS6 Design and Web Premium\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Jon\Desktop\Adobe CS6 Design and Web Premium\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Errors "Exit Code: 6," "Exit Code: 7"
Acrobat Cleaner Tool
Sign in or activation errors
CS6 applications in Creative Cloud unexpectedly revert to trial mode
Flash Player Help | Installation problems | Flash Player | Windows
Mylenium

Problems Installing Updates from WSUS - Error Code 0x800f0826

Hi Everyone,
I have a WSUS server that I am using to dish out updates to the rest of my network. I am using PC's with Windows Vista SP1. Most of my PC's are installing updates fine with no problems - but there are a certain few that will not install any updates and return the error 0x800f0826.
All of the PC's are from the same image - so there is nothing different in the software setup that I am aware of.
I have been browing the net for ages, and have tried a few fixes - for example:
Starting Various Services and Setting to Automatic - No Luck
Renaming the SoftwareDistribution Folder - No Luck
Checked update history for failed updates and unassigned potential problem update - No Luck.
I am running out of ideas now - can anyone help?
Thanks
Matt

Install System Update Readiness Tool
Once you installed SUR Tool, run below commands
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
Downlod System Update Readiness Tool from below link
http://windows.microsoft.com/en-GB/windows7/What-is-the-System-Update-Readiness-Tool
Refer : http://www.thewindowsclub.com/checksur-system-update-readiness-tool
Refer below link for analyzing log and further troubleshoot :
http://www.sevenforums.com/tutorials/108805-system-update-readiness-tool-checksur-log-file-analyzis.html
Regards,
Manjunath Sullad

Having a problem installing hfm from yaourt

im trying to install hfm-net-sv a fah montioring program, and im having problems, i have tried downloading the pkg build manualy and running makepkg , but i still get the same error:
[mark@markspc hfm]$ yaourt hfm-net-svn
1 aur/hfm-net-svn 20-1 (1)
Folding@Home monitor written in .NET/mono
==> Enter n° (separated by blanks, or a range) of packages to be installed
==> ----------------------------------------------
==>1
==> Resuming previous build
==> Downloading hfm-net-svn PKGBUILD from AUR...
--2010-05-15 22:24:37-- http://aur.archlinux.org/packages/hfm-net-svn/hfm-net-svn.tar.gz
Resolving aur.archlinux.org... 208.92.232.29
Connecting to aur.archlinux.org|208.92.232.29|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 790 [application/x-tgz]
Saving to: `hfm-net-svn.tar.gz'
100%[============================================================================================================>] 790 --.-K/s in 0s
2010-05-15 22:24:37 (310 MB/s) - `hfm-net-svn.tar.gz' saved [790/790]
bsdtar: Removing leading '/' from member names
x PKGBUILD
First Submitted: Fri, 05 Jun 2009 02:19:03 +0000
hfm-net-svn 20-1 : Folding@Home monitor written in .NET/mono
( Unsupported package: Potentally dangerous ! )
==> Edit PKGBUILD = [Y/n] ("A" to abort)
==> ----------------------------------------------
n
==> hfm-net-svn dependencies:
- mono (already installed)
- subversion (already installed)
- monodevelop (already installed)
==> Continue the building of hfm-net-svn = [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for hfm-net-svn:
==> Building and installing package
==> Yaourt has detected previous hfm-net-svn build. Do you want to use it (faster) = [Y/n]
==> ----------------------------------------------
==>n
==> hfm-net-svn dependencies:
- mono (already installed)
- subversion (already installed)
- monodevelop (already installed)
==> Determining latest svn revision...
-> Version found: 180
==> Making package: hfm-net-svn 180-1 x86_64 (Sat May 15 22:24:46 BST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
At revision 180.
==> SVN checkout done or server timeout
==> Starting make...
MonoDevelop Build Tool
Loading solution: ./HTMLparser2.sln
Loading solution: ./HTMLparser2.sln
Loading projects ..
Building: HTMLparser2 (Release)
Building Solution HTMLparser2
Building: HTMLparserLibDotNet11 (Release)
Performing main compilation...
/usr/bin/gmcs /noconfig
"/out:/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-buil
d/HTMLparser2/bin/Release/HTMLparser.dll" "/r:System.dll"
"/r:System.Data.dll" "/r:System.Xml.dll" /nologo /warn:4 /optimize+
/codepage:utf8 "/define:TRACE" /t:library
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/AssemblyInfo.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/DynaString.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/FastHash.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLchunk.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLentities.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLheuristics.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLparser.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/TagParser.cs"
Compilation succeeded - 4 warning(s)
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(948,53): warning CS0219: The variable
`iLastCurPos' is assigned but its value is never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(902,37): warning CS0219: The variable
`iQuadBytes' is assigned but its value is never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(166,22): warning CS0414: The private field
`Majestic12.HTMLparser._bDecodeEntities' is assigned but its value is
never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(183,22): warning CS0414: The private field
`Majestic12.HTMLparser._bDecodeMiniEntities' is assigned but its value
is never used
Build complete -- 0 errors, 4 warnings
MonoDevelop Build Tool
Loading solution: ./HFM.Setup.sln
Loading solution: ./HFM.Setup.sln
Loading projects ..
WARNING: ./HFM.Setup.sln(4): Unsupported or unrecognized project :
'/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM
.Setup/HFM.Setup.wixproj'.
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/HFM.exe': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/*.dll': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/CSS/*': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/XML/*': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/XSL/*': No such file or directory
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build hfm-net-svn package.
[mark@markspc hfm]$
any help will be appricated, thanks, mark

I think this should be posted in the aur section...
Have you tried asking the maintainer?

Problem installing CS2 from download.

I was attempting to re-install Adobe CS1 but could not get it to re-activate. I called Adobe support and was directed to download the CS2 suite from their site. I downloaded it and attempted to install. The filenames are a little different than those referenced in the installation instructions but everything went perfect until it ask me to insert CD #2. The extraction process extracted the program files to different folders on my c: drive so there are no actual CD's. I don't understand why the install routine cannot find or be directed to the next set of extracted files. This has gotten very frustrating. Can someone please help me? I downloaded the following:
CS2_install_Win.pdf -- installation instructions
CreativeSuiteCS2Disc1.exe
CreativeSuiteCS2Disk2.exe
CreativeSuiteCS2Disk3.exe
CS_2.0_WWE_Extras_1.exe
VCS2.zip
thanks for your help,
tom

Before I start copying files............when I extracted the files the process created the following folder structure:
C:\Creative Suite
          |_
              Adobe Creative Suite 2.0
                             |_
                                Adobe InDesign 2.0
                                Adobe Version Cue 2.0
C:\Creative Suite CS2
          |_
             Adobe Creative Suite 2.0
                            |_
                               Adobe Illustrator CS2
                               Adobe Photoshop CS2
                               etc
                               etc
C:\CS_2.0_WWE_Extras_2
Where do I need to move files from/to?
thanks, tom

Hi Folks : Down loaded the trial version, Having problems installing it from CD

Hi Folks:
Downloaded the Trial version of IWORKS. Bought the CD installed it , keeps on asking for serial number. Deleted the Trial version loaded it again still no luck keeps on asking for serial number. Any suggestions???

It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.
FYI: there is no 's' in iWrok

Problem installing infosource from BCT

Hi gurus,
I installed the master data characteristic 0BBP_BIDCAT from the BCT (InfoSources by Application Component ==> SAP Application Components ==> Cross-Application Sources ==> Product ==> Master Data Product ==> Product Category (Bid Invitation)). I chose the "In data flow before" grouping and the all the process was error-free. Then, when I go to the Modeling option, in RSA1, and choose "InfoSources", the InfoSource 0BBP_BIDCAT is not presented and I cannot load this master data. Any ideas?

Hi,
You can also try out with option the only neccessary infoobjects and try to install the business content and check it out.Also when you enter the modeling screen just refresh the screen and observe it.
Hope this helps,
Thanks,
vrrp

Problem installing appliction from IPhone

Dear all,
I'm facing problem when I'm trying to download application from iphone, instead of opening application page, it open white page with alot of text, any one could hemp me

After talking with my e-mail service provider I understood some more configurations, which might help you to help me:
SMTP Settings:
Authentication method: encrypted password
Connection Security: STARTTLS
How can I copy these settings into my iPhone 5S? In Authetication there's only the following options:
Password, MD5 challenge-response, HTTP MD5 Digest and NTLM...
Thank you!
Best regards,
Pedro Santos

Problems installing CS5 from an external HDD

I'm having issues installing CS5 on to my win 7 laptop. CS5 was loaded onto my external HDD by the administrator at my workplace; when I attempted to install it, it seemed to be going fine until it asked me to 'insert disk 2' to continue. I tried to mount the iso image file but the couple of programs I tried didn't allow me to do so. CLONE DVD2 seemed to be working up to the point of burning the DVD but the file was too big to fit on a DVD. Can I mount the ISO and open it without burning it, if so, using what software?

IsoBuster, WinRAR, 7zip all can mount or open ISO images. The severity of your problem makes me think that the image is damaged, though, which could even mean that the original DVD was damaged and thus wrong CRC info ended up on the ISO...
Mylenium

Problem installing pyatspi from svn

Hi,
Don't know if this is the right forum to ask this but at least it looks like :D
I'm trying to install pyatspi[0] with no luck, I really don't now if I'm doing something wrong or it's a bug somewere.
Here are my steps
1) svn co svn://svn.gnome.org/svn/at-spi/trunk/pyatspi pyatspi
2) cd pyatspi
3) sudo python setup.py install
Here is the install trace:
running install
running build
running build_py
package init file '__init__.py' not found (or not a regular file)
creating build
creating build/lib
creating build/lib/pyatspi
copying registry.py -> build/lib/pyatspi
copying constants.py -> build/lib/pyatspi
copying utils.py -> build/lib/pyatspi
copying event.py -> build/lib/pyatspi
copying accessible.py -> build/lib/pyatspi
package init file '__init__.py' not found (or not a regular file)
running install_lib
copying build/lib/pyatspi/registry.py -> /usr/lib/python2.6/site-packages/pyatspi
copying build/lib/pyatspi/constants.py -> /usr/lib/python2.6/site-packages/pyatspi
copying build/lib/pyatspi/utils.py -> /usr/lib/python2.6/site-packages/pyatspi
copying build/lib/pyatspi/event.py -> /usr/lib/python2.6/site-packages/pyatspi
copying build/lib/pyatspi/accessible.py -> /usr/lib/python2.6/site-packages/pyatspi
byte-compiling /usr/lib/python2.6/site-packages/pyatspi/registry.py to registry.pyc
byte-compiling /usr/lib/python2.6/site-packages/pyatspi/constants.py to constants.pyc
byte-compiling /usr/lib/python2.6/site-packages/pyatspi/utils.py to utils.pyc
byte-compiling /usr/lib/python2.6/site-packages/pyatspi/event.py to event.pyc
byte-compiling /usr/lib/python2.6/site-packages/pyatspi/accessible.py to accessible.pyc
running install_egg_info
Removing /usr/lib/python2.6/site-packages/pyatspi-0.1.0-py2.6.egg-info
Writing /usr/lib/python2.6/site-packages/pyatspi-0.1.0-py2.6.egg-info
I'm using python 2.6.2 and a 64bits version of arch.
This warning is what worries me --> package init file '__init__.py' not found (or not a regular file), but i get the same when running the install process on a Kubuntu machine.
Here is my locate result
/usr/lib/python2.6/site-packages/pyatspi
/usr/lib/python2.6/site-packages/pyatspi-0.1.0-py2.6.egg-info
/usr/lib/python2.6/site-packages/pyatspi/accessible.py
/usr/lib/python2.6/site-packages/pyatspi/accessible.pyc
/usr/lib/python2.6/site-packages/pyatspi/constants.py
/usr/lib/python2.6/site-packages/pyatspi/constants.pyc
/usr/lib/python2.6/site-packages/pyatspi/event.py
/usr/lib/python2.6/site-packages/pyatspi/event.pyc
/usr/lib/python2.6/site-packages/pyatspi/registry.py
/usr/lib/python2.6/site-packages/pyatspi/registry.pyc
/usr/lib/python2.6/site-packages/pyatspi/utils.py
/usr/lib/python2.6/site-packages/pyatspi/utils.pyc
Here is the trace of the install process on a Kubuntu i686 machine
running install
running build
running build_py
package init file '__init__.py' not found (or not a regular file)
creating build
creating build/lib.linux-i686-2.6
creating build/lib.linux-i686-2.6/pyatspi
copying registry.py -> build/lib.linux-i686-2.6/pyatspi
copying event.py -> build/lib.linux-i686-2.6/pyatspi
copying constants.py -> build/lib.linux-i686-2.6/pyatspi
copying utils.py -> build/lib.linux-i686-2.6/pyatspi
copying accessible.py -> build/lib.linux-i686-2.6/pyatspi
package init file '__init__.py' not found (or not a regular file)
running install_lib
creating /usr/local/lib/python2.6/dist-packages/pyatspi
copying build/lib.linux-i686-2.6/pyatspi/registry.py -> /usr/local/lib/python2.6/dist-packages/pyatspi
copying build/lib.linux-i686-2.6/pyatspi/event.py -> /usr/local/lib/python2.6/dist-packages/pyatspi
copying build/lib.linux-i686-2.6/pyatspi/constants.py -> /usr/local/lib/python2.6/dist-packages/pyatspi
copying build/lib.linux-i686-2.6/pyatspi/utils.py -> /usr/local/lib/python2.6/dist-packages/pyatspi
copying build/lib.linux-i686-2.6/pyatspi/accessible.py -> /usr/local/lib/python2.6/dist-packages/pyatspi
byte-compiling /usr/local/lib/python2.6/dist-packages/pyatspi/registry.py to registry.pyc
byte-compiling /usr/local/lib/python2.6/dist-packages/pyatspi/event.py to event.pyc
byte-compiling /usr/local/lib/python2.6/dist-packages/pyatspi/constants.py to constants.pyc
byte-compiling /usr/local/lib/python2.6/dist-packages/pyatspi/utils.py to utils.pyc
byte-compiling /usr/local/lib/python2.6/dist-packages/pyatspi/accessible.py to accessible.pyc
running install_egg_info
Writing /usr/local/lib/python2.6/dist-packages/pyatspi-0.1.0.egg-info
and the locate result (without docs and debian-related stuff)
/usr/lib/python2.6/dist-packages/pyatspi
/usr/lib/python2.6/dist-packages/pyatspi/__init__.py
/usr/lib/python2.6/dist-packages/pyatspi/__init__.pyc
/usr/lib/python2.6/dist-packages/pyatspi/accessible.py
/usr/lib/python2.6/dist-packages/pyatspi/accessible.pyc
/usr/lib/python2.6/dist-packages/pyatspi/constants.py
/usr/lib/python2.6/dist-packages/pyatspi/constants.pyc
/usr/lib/python2.6/dist-packages/pyatspi/event.py
/usr/lib/python2.6/dist-packages/pyatspi/event.pyc
/usr/lib/python2.6/dist-packages/pyatspi/registry.py
/usr/lib/python2.6/dist-packages/pyatspi/registry.pyc
After doing the install procces I can succesfully import the module on Kubuntu, but on Arch I get a nice
$ python -c "import pyatspi"
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: No module named pyatspi
Note: If I create a __init__.py file inside /usr/lib/python2.6/dist-packages/pyatspi I can import the module, but it makes no differece because it useless.
Thanks in advance.
[0] - http://live.gnome.org/GAP/PythonATSPI
Last edited by federico (2009-09-16 05:00:17)

Using the new gmacros.h does nothing for me here's my build error
make all-recursive
make[1]: Entering directory `/home/alberto/Downloads/appmenu-gtk/src/appmenu-gtk-12.10.2/build-gtk3'
Making all in src
make[2]: Entering directory `/home/alberto/Downloads/appmenu-gtk/src/appmenu-gtk-12.10.2/build-gtk3/src'
make all-am
make[3]: Entering directory `/home/alberto/Downloads/appmenu-gtk/src/appmenu-gtk-12.10.2/build-gtk3/src'
CC libappmenu_la-bridge.lo
../../src/bridge.c: In function 'app_menu_bridge_insert':
../../src/bridge.c:860:3: error: implicit declaration of function 'GTK_IS_TEAROFF_MENU_ITEM' [-Werror=implicit-function-declaration]
if (GTK_IS_TEAROFF_MENU_ITEM (child))
^
cc1: all warnings being treated as errors
make[3]: *** [libappmenu_la-bridge.lo] Error 1
make[3]: Leaving directory `/home/alberto/Downloads/appmenu-gtk/src/appmenu-gtk-12.10.2/build-gtk3/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/alberto/Downloads/appmenu-gtk/src/appmenu-gtk-12.10.2/build-gtk3/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/alberto/Downloads/appmenu-gtk/src/appmenu-gtk-12.10.2/build-gtk3'
make: *** [all] Error 2
EDIT: This was me trying to build appmenu-gtk, changing the gmacros.h was said to help this in the AUR page
Last edited by 0X1A (2013-04-24 00:10:17)

Problem installing StatsPack from OEM

Similar Messages

Maybe you are looking for