Problem installing the driv

Hi
I'm trying to install new drivers for my CT4750 card. I've downloaded SBPCI28Setupus_w2k.exe ( http://se.europe.creative.com/suppor...etupus_w2k.exe ) which should be the one I need (I'm running XP Home), but the installer doesn't work. I click it, it starts to extract its files (the installshield wizard) to 00%, and then it shuts down without anything happening. The installation doesn't start. So I tried to extract the files from the .exe, and running the setup directly, but the same thing happens.
I tried downloading Li'veDrvUni-Pack(ENG).exe which is for another card just to see if THAT works. There the installation starts but notices it's the wrong card and shuts down. So the problem must be in SBPCI28Setupus_w2k.exe.
Does anyone understand this problem? It's terribly annoying and I can't see any way to solve it. Possibly install all the files from the .exe manually, but I have no idea how to do that or if it even works.
thanks

Nobody can help you without proper technical information such as system specs and what Internet connection you are actually on. Trivial things like using a different W-LAN can make all the difference.
Mylenium

Similar Messages

Os 10.7.5; problems to install the driver for Officejet Pro 8600

I have just bougt the Officejet Pro 8600. First I tried the installation disc at the reply was that I had to conntact HP to get the latest installation version. So I did. Downloaded for the HP homepage at got the driver. When installing I got the same answer: get the latest version. Any suggestion so I could connect my iMac to the new printer?

Hi Heistein,
Welcome to the HP Forums.
I understand you are having trouble with installing the driver.
I would recommend to take a look through this guide. An 'Unsupported Operating System' Message Displays on a Mac Running OS X 10.7 Lion.
Hope this information helps, and have a great day.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Windows 8.1 will not install the driver for Officejet 6310 All-in-One

Have downloaded the driver from the HP website, but it will not install. The download wizard "detected a problem with the driver software" but did not say how to resolve it. The option to download the software was still available, so I did that anyway. When attempting to execute from my hard-drive, extraction occurs, followed by a delay, and then a message that reads "This application has requested the Runtime to terminate it in an unusual way". This is in an error box headed "Microsoft Visual C++ Runtime Library". Can anyone help please?

Hi AB-Comp,
Welcome to the HP Forums! I understand that your are seeing the error The download wizard "detected a problem with the driver software". I am happy to help you with this issue! I have some questions for you:
What Operating System are you using? Windows or Mac? What version?
Can you make copies with the printer?
How is the printer connected? Wireless, Ethernet, or USB?
Is the power cable plugged into a surge protector or directly to the wall outlet?
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Problems with the driver for the HP E3631A

I have installed the driver of NI for Labview version 5.1.
I need to send information to a DC Power Supply ( HP E3631A), this information is just to set the output voltage for the HP E3631A.
I'm using the "getting started.vi" for the HP E3631A, normaly this must work !
I have called with support from NI,
But they couldn't tell me what the problem was !
The problem is that when I set the voltage on my PC ( using labview),
and run the getting started.vi, I always get the same outputvoltage from my DC Power Supply. ( HP E3631A ) ( +0.288V )
You first need to choose between +6V, +25V and -25V.
The strange thing is that when you change this, the DC Power Supply
changes correctly, follows these settings.
So the DC Power Sup
ply follow's the +6V, +25V and -25V when you change these, but always gives the same voltage when you set the outputvoltage.
Can you tell me what the problem is ??
Thanks in Advance !
Hope you can solve my problem !!!

Pauwels,
You may also check in the Configure Output.vi, which is one subvi of the Getting Started VI, and try to set the boolean for output(which is On=True by default) to false. I do not have the power supply, but my guess is that this boolean when set to true, only allows the predefined values.
Regards,
Cyril Bouton
Applications Enginneer
National Instruments
Cyril Bouton
Active LabVIEW Developper

Lenovo G550 59-046612 problem installing audio driver in XP - SP2

hi,
I have recently bought a Lenovo G550 59-046612 laptop. As the given driver cd includes all the drivers for Windows 7 I downloaded all the required drivers for my laptop from the following list
http://consumersupport.lenovo.com/in/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=600154&OS=W...
as I am using windows XP Service Pack2. All the drivers installed fine but I got problem installing the audio driver. I tried both from the downloaded exe and also from the extracted folder named drivers in my C drive.I was getting the error "A conexant audio device could not be found.The application will now exit." Please help me out.
Thanks in advance
Sudip

have you tried to install drivers on safe mode or manually?
after you locate the .inf file for the driver that you want to install, manually install the new driver. to do this, follow these steps:
- click start, right-click computer, and then click properties.in the tasks pane, click device manager.
- if you are prompted for an administrator password or confirmation, type your password or click continue.
- in device manager, locate the device for which you want to install the driver.
note to display hidden devices, click show hidden devices on the view menu.
- right-click the device, and then click update driver software.
- click browse my computer for driver software, click let me pick from a list of device drivers on my computer, and then click have disk.
- in the install from disk dialog box, click browse, locate an .inf file for the device driver that you want to install, and then click open.
- follow the steps in the update driver software devicename dialog box to update the driver

Why Do I Get Error 1722 When Installing the Driver CD with Windows XP?

I'm having problem to install the driver CD, it shows a message saying that occured an error 1722
A tried to do what you said on this topic: http://digital.ni.com/public.nsf/websearch/34ABE6F20DD4981D86256E8600752DFE?OpenDocument
But on step 10, when a I tried to Select the property "Replace permission entries on all child objects with entries shown here that apply to child objects" and aply, the PC showed an error saying that de Registry Editor cannot define the security of that key selected or one of its sub-keys.
I tried to install after this and showed de 1722 error's message again.
Solved!
Go to Solution.

Have you also tried disabling the anti virus?

Pnputil - failed to install the driver

Hi,
I run cmd as admin, windows account is too admin, directory is OK, but I still can not install driver (for StarSign CUT device). Driver is official, and if I install driver in Explorer, everything is OK.
Windows 8.1 64bit, last upadate. HP 350 G1. On the another two PCs, everything runs good. Do anybody have some tips for solve this problem? Thank you.
D:\driver>pnputil -i -a SZCCID.INF
Microsoft PnP Utility
Processing inf : SZCCID.INF
Failed to install the driver on any of the devices on the system : No more data are avalaible
Total attempted: 1
Number successfully imported: 0

Hi Ding27,
What is the commands used on the other two PCs? Why not take use of Device Manager to install the proper drivers?
It seems to be a little problem when using the pnputil command.
You may take a try with the following:
pnputil /a /i <file path/inf file name>
Reference:
PnPUtil Command Syntax
PnPUtil Examples
Best regards
Michael Shao
TechNet Community Support

Turbo memory Crashes vista and windows 7 when I install the driver (any available driver)

It goes like this .
when I first receive my t61 there was a vista installation and turbo me worked. I downgraded to XP and then I didn't use turbomem.
about half a year ago I tried running windows 7 beta and one of the turbo memory drivers worked but didn't operate the Readyboost or ready drive but only I was able to see the IMD-0 in the disk management so I mounted the IMD as a drive and run manually the ready boost on that drive.
I installed a newer version of windows 7 (Build 7600) and I tried that newer turbo mem drivers and the older drivers nothing works !
When I install the driver my comp crashed because ianvstor. That happens everytime IM trying to install the driver.
I tried installing vista SP2 and the same thing happens. I think my turbo mem chip is burned or something.
I also tried to replace hard drives and it didn't works.
it's really annoying that I have a component on the computer which I payed for it and it doesn't work.
i really hope this forum can help me to solve the problem.
i was going throw all the posts in google about turbo mem and none of them have my problem which I can't even install the driver.

ZetLAW wrote:
about half a year ago I tried running windows 7 beta and one of the turbo memory drivers worked but didn't operate the Readyboost or ready drive but only I was able to see the IMD-0 in the disk management so I mounted the IMD as a drive and run manually the ready boost on that drive.
I installed a newer version of windows 7 (Build 7600) and I tried that newer turbo mem drivers and the older drivers nothing works !
When I install the driver my comp crashed because ianvstor. That happens everytime IM trying to install the driver.
I tried installing vista SP2 and the same thing happens. I think my turbo mem chip is burned or something.
I also tried to replace hard drives and it didn't works.
it's really annoying that I have a component on the computer which I payed for it and it doesn't work.
i really hope this forum can help me to solve the problem.
Windows 7 is still in beta stages first of all, and second, Lenovo hasn't released any official drivers to work with Windows 7 yet. That will NOT happen unitl Microsoft offically releases Windows 7.
http://www.lenovo.com/us/en/windows7/index.html?ipromoID=wnb00492&
I would highly recommend sticking with the OEM version of your OS to eliminate problems of this kind! You want Lenovo to help you, but you're using a non-OEM operating system on your unit. Maybe someone else here in the forum might be able to assist you.
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

It says "can not install the driver: could not find media for this driver"

I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says "can not install the driver: could not find media for this driver", how ever i get a beep for every error message. In my device manager there is no UAA and in services.msc windows audio is started.
I have tried almost everything on net but not able to solve this, plz help.

vendor wrote:
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
jutapa

I installed the driver, but still cant find device

Hello!
I recently purchased a HP F4280 printer. I installed the driver off the disk provided but when I get to the installation part my computer cant find the device. So it says to go to hp.com/support, which I did and I DLed the driver from there as well, but same problem. I know Ive had this happen before and I feel like I have to move the file into the library or something of the sort... can anyone help?
Thank you!

What "installation part" do you mean? The driver, the printer, the OS. It's hard for us to help when you provide such limited information.
Adding a printer is detailed in OS X help. Select Mac Help from the Finder's Help menu and search for "printer" to locate help articles.

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

Agere Ethernet Controller (ET-131x) - unable to install the driver

I need to install the following wired NIC:
01:00.0 Ethernet controller: Agere Systems|ET-131x PCI-E Ethernet Controller (unknown)
It seems that the "et131x" kernel module is necessary.
The web site bellow gives instructions on how to install the driver from sources:
http://dadams1969.googlepages.com/et131xkernelmodule
Unfortunatly I am unable to do it.
I have also tried to install the module compiled by a member at the following address:
http://www.archlinux.org/~tom/packages/
The module seems to be installed properly. A new folder is created in /lib/modules/
However, I am unable to load it.
# modprobe et131x.ko
FATAL: Module et131x.ko not found
#insmod et131x.ko
insmod: error inserting 'et131x.ko': -1 Invalid module format
Am I doing something wrong?
NB:
The module has been compiled for the 2.6.20 kernel and I am using 2.6.22 (i686)...
Last edited by sylvain77 (2007-09-26 08:23:48)

Heh... I had competely forgotten that I had done that, so now I feel morally obliged to help you.
I just tried a rebuild against 2.6.22 and it failed, but after a little digging around, I found a patch, and now it builds. I can't tell you if it works or not, as I don't have the hardware.
Get the new package in the same place as before, and let me know how it goes.
It's worth noting that this code is 6 months old at this stage, and the project doesn't seem to be very active. There's one 4-mail thread about it on lkml.org, with no indication that this will ever be merged to mainline.

I have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

Load the drivers and you should then be able to add it in Print Center.

HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP.

Problem installing the driv

Similar Messages

Maybe you are looking for