Problem installing / using MSI R9 270X 2GB Gaming card

I am a newbie here. I have just built my new PC, but I can't seem to get my MSI R9 270X card to install and work. I am not sure if this is a motherboard or graphics card problem. I know a little to build the PC, but I am not expert. So help would be great.
This is the spec of the PC:
Asus Z87 Pro motherboard
Intel i7 4770K CPU
Corsair Vengence 16 GB DDR3 (CML16GX3M2A1600C9)
Samsung SSD Pro 256GB System drive
Western Digital Black 2TB media drive
Be Quiet Dark Power Pro 650W PSU
Lycom Firewire card (PCIe x1_4)
Plextor BD/DVD
Windows 7 Pro x64
So when built, last week, everything seems to work OK. Then I was using the Intel GPU, but I need a graphics card for video editing. I am not a gaming user. The Asus motherboard reports a post BIOS Q code of "A0".
To the best of my knowledge I have the latest BIOS and Windows updates and drivers.
I have put the MSI graphics card into the PCIe x16_1 slot. I have made sure it is seated well and that the 2 power cables are connected to the PSU (20A @12V)
When booting up the PC the BIOS "bleeps" several times and I get an error message saying that "The memory address is insufficient due to Intel Thunderbolt resource consumption". The motherboard does not have Thunderbolt as far as I know. That PCI slot is shared with ECHI#1.
Somehow, I got the card to install yesterday without that message. I installed the latest AMD driver 12.13, but the Catalyst Control Center did not show up. The MSI card showed in Device Manager as working with no conflicts. The MSI Utility showed the Core Clock working at 300MHz, which seems very slow.
I have tried re-installing, but still no luck and today got the BIOS message back and it would not go past that message. I have removed the graphics card for the time being so I can use the PC.
So I am not sure if this is a motherboard issue, or a faulty graphics card or my fault?
It seems crazy if you can't have a graphics card and other motherboard resources switched on. Someone has suggested turning off the built in WiFi and Bluetooth controller. I have not tried that yet because I need them.
Any help appreciated.
This is my first post here and can't find a way to attach a screen shot to help. Is that possible?

Thank you for the reply.
I cleared the CMOS by using the motherboard jumper. I did not remove the battery.....I hope that is OK.
I removed the Firewire card. This did not have a power cable connected to it. I assume that might be OK as I am only using it to capture DV from my camera. It was in a PCI slot that was not shared with the graphics card though. I do need this card to be working if at all possible?
I re-booted and entered the BIOS. The clock had not cleared but everything else seemed to be back to default.
I powered down and fitted the MSI graphics card.....it passed the BIOS OK. I had previously removed all traces of AMD/ATI by un-installing and manual removing from folders and registry.
I then installed the latest driver and Catalyst Control Center. The log file said everything passed, but the CCC still does not show up. Any idea what could be happnening here?
So far, so good but since I need this PC for my editing, what should I do about the Firewire card?
P.S. I also need the Intel GPU to be used as well for Quicksync use. I assume i will have to reset that in the BIOS?

Similar Messages

MOVED: Screen Flickering with an MSI R9 270x 2GB Gaming OC edition graphics card

This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=252552.0

A vbios update does not help in 90% of cases. Run the Gaming APP in OC or Gaming mode and see if that helps: http://download.msi.com/uti_exe/gamingApp.zip
If not add S/N and save the current vbios to file, upload it to some file hoster and add link here. If not allowed to post links yet, mask it by XX at beginning and end (e.g. XXlink.comXX)

Black screen when MSI driver is installed (MSI R9 270X 2GB )

Bought new computer and everything worked fine until couple of days ago ..
can pull some info ..
Windows 7 Ultimate x64
AMD 8350FX 8-core
ASUS Sabertooth 990FX R2
MSI R9 270X 2GB GDDR5
8GB 1866MHz RAM
120gb SSD Kingston HyperX
Everything worked fine even with the drivers that are there now but one day the screen started to fluttering and act strangely then windows crashes. I rebooted then when I want to log in or when the login page will show I only got black screen...
Reboot again ... go into " safe mode " ... screen works with standard VGA ... uninstall the drivers for the MSI card ( msi.com ) ... restart ... everything works .
However, it goes on the standard VGA but as soon as I install the drivers, I get the same problem ....
What has happened?
Got NO clue right now .. drivers worked before , I haven't updated them since I installed them (3weeks ago) I have not done anything that I can think of ..
Are grateful for answers!

I have the same problem. Updated driver to 13.11 beta was running my MSI 2GB r9 270x for 3 days got it on the 24th and today after a system reboot the windows screen appears to load then goes to black. I started safe mode, uninstalled the ati graphics drivers, rebooted and windows booted fine. Reinstalled the lastest 13.12 driver and rebooted to the black screen again.
Specs:
Board: P7P55D Asus
PSU: Cooler Master Silent Pro M850 @ 850 W output SINGLE 12V channel at 66A
VCard: R9 270x MSI 2G
Proccessor: intel i5 750 @ 2.66 GHZ
Did not overclock the video card or touch the voltages, tried VBIOS updates to fixed the screen flicker and it worked find the flicker dissapeared after the this new black screen problem happened i reverted back to the stock VBIOS the card shipped with(saved it before i updated it) reverting to the stock VBIOS didnt fix the problem only removing the driver fixes the problem, any help would be greatly appreciated.
Thanks for your time,
Empirus

MSI R9 270X 2G Gaming artifacts

I have artifacts and random graphical glitches in games.
These tend to occur after gaming for at least an hour.
I believe I have the latest vbios (here is a rom pulled from the card via GPU-Z: mediafire (dot) com/?3cj808ylqdi11my) and have tried many drivers.
I have included some screenshots below to give a quick look at the issue. I get the issue at R9 270 clock speed (900 core, 1400 mem)

Quote from: horsemama1956 on 04-May-14, 03:14:55
Registered after this thread came up with a google search as I have the same problem(Not so much the giant obvious ones, but the smaller group of clear boxes as seen in the second BF pic).
I know it's a few weeks late, but try downclocking the memory to 1200 and check. I have the same issues and that eliminates it, and it seems quite common with this model of MSI cards. I think they had a bad batch of memory or just used old 7870s and overclocked the memory instead of using a quicker part. I would RMA it, but you may still get the same issue with an identical replacement.
I tested 3dmark 11 for like an hour and anything over 1200-1250 memory(same memory speed as a many 7870s) causes issues.
Yes with with other words all MSI r9 270x 2G are corrupted... so MSI need to give our money back or make a fix for us.. I have pay a lot of money for this card and send 3 RMA's and still get this issue with the new card....... The store don't want give my money back and said that i need contact MSI Well im reading this forum and see many people have the same issue!
MY Power supply is 800WATT Enermax so thats not the problem of this issue..

Clean Install - use MSI System Drivers?

I have a question regarding a clean install.
Install operating system -> MSI Chipset Drivers then update on top using ATI Catalyst 8.4?, Realtek Audio Drivers and finally Realtek PCI-E Lan Drivers.
What is difference between the MSI Drivers and the Catalyst suite? They same to be the same:
Catalyst Control Centre
ATI Install Manager
North Bridge Filter Driver
ATI Display Manager
IDE Driver
Microsoft Visual C++
ATI Unified Stream Driver
except the MSI Drivers adds Avivo64 Driver
Also, I thought it was always best to unistall all ATI drivers before upgrading? - at least that is the concensus on the AMD forum.
Any advice is appreciated.
Vista x64 Premium
Antec P182B Case
MSI K9A2CF BIOS ver 1.5B1
AMD Phenom 9500
Thermaltake ToughPower 750w
ATI Radeon 2900XT
OCZ PC2-6400 800Mhz 2 x 1024
Seagate 500GB 16MB cache SATA-2 HD
Mitsumi 1.44 internal 3.5 floppy / 6 in 1 card reader
Samsung 206BW

I guess that's where I'm confused.
It dosen't appear that the MSI system drivers are any different than the ATI catalyst drivers. The only difference is that the MSI drivers wanted to install Avivo64 on my system. Going to the ATI Catalyst site, it offers Avivo64 as a seperate download, but "Avivo Video Converter will only work with X1000 series products." http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista64/common-vista64 I have a 2900XT.
The Realtek audio and PCIe Ethernet drivers to install from the MSI site are in this case up to date and make sense.
So to ask in a different way, is there a problem with: OS first -> then the ATI Catalyst Suite (system drivers and display driver) - NOT install the MSI system drivers which appear to be outdated and the same as the ATI Catalyst Suite- then the Realtek Audio Driver, and finally the Realtek PCIe Ethernet driver.
Thanks
Vista x64 Premium
Antec P182B Case
MSI K9A2CF BIOS ver 1.5B1
AMD Phenom 9500
Thermaltake ToughPower 750w
ATI Radeon 2900XT
OCZ PC2-6400 800Mhz 2 x 1024
Seagate 500GB 16MB cache SATA-2 HD
Mitsumi 1.44 internal 3.5 floppy / 6 in 1 card reader
Samsung 206BW

Artifacts in games MSI R9 270x 2Gb

Hi.
Few days ago I bought new PC.
PC spec: MSI 970 Gaming AM3+ (MS-7963), GPU MSI R9 270x, AMD FX 8320, PSU Be-Quiet 600W. OS Win.8.1, 8Gb Ram HyperX Blue
In every game I play I got artifacts, is unplayable. I test with MSI drivers, also with new AMD drivers 14.12
Also I flash GPU with new BiOS, problem still exist. So I want ask you guys, should I RMA this GPU or there is fix for it ?
BIOs --------> https://www.dropbox.com/s/35cyztj6oup2fgu/Pitcairn.rom?dl=0
GPU S/N 602-V303-13SB1312019935
Screen with old BIOS
New BIOS

GPU temp in heavy stress (furmark 1080p AA x8) is max 78 but mostly in games is around 65-70.
I can't tell if problem occurs with other GPU cos I don't have one.
Also today this happend when I turn on my PC.
This should be MSI splash screen.

JRE 1.4.2_10 Silent install using MSi and JRE 5.0_06

I have been unable to install JRE 1.4.2_10 using the msi and mst silently. My company requires all applications be installed using and msi not an exe. and with no user intervention. I can install using the msi and mst but not silently,.
Also it does not allow me to choose IE as the default browser. I change the setting in the MST for IE, but this does not work, I still have to manually go in and change it after the install.
I have the same issue with version 5.0_06. This does allow me to choose IE as the default browser but does not install silently.
I am installing on Windows 2000 SP4.

Can't help you with the MSI/MST part of your question directly, however we use the following command line:
jre-1_5_0_04-windows-i586-p.exe /s /v" /qn ADDLOCAL=jrecore,extra IEXPLORER=1 REBOOT=ReallySuppress JAVAUPDATE=0 SYSTRAY=0"
You might be able to make IEXPLORER=1 work for you via the MSI?
Additionally, you can manage JRE settings via the following method -
Place a file called 'deployment.config' in the following location:
%SystemRoot%\Sun\Java\Deployment
This file can act as a pointer to a configuration file (aka jre.properties)
The contents of 'deployment.config' would look like (as an example):
deployment.system.config=file://///servername/share/jre.properties
'jre.properties' would then contain this like:
deployment.version=1.5.0
deployment.browser.path=C\:\\Program Files\\Internet Explorer\\iexplore.exe
deployment.javaws.version=javaws-1.4.2_05
deployment.system.cachedir=C\:\\Temp\\Java\\cache
deployment.system.cachedir.locked
deployment.user.logdir=C\:\\WINNT\\Debug\\UserMode
deployment.user.logdir.locked
deployment.proxy.type=3
deployment.proxy.type.locked
deployment.cache.max.size=10m
deployment.cache.max.size.locked
deployment.trace=false
deployment.trace.locked
deployment.log=false
deployment.log.locked
deployment.javapi.lifecycle.exception=false
deployment.javapi.lifecycle.exception.locked
deployment.console.startup.mode=DISABLE
deployment.console.startup.mode.locked
deployment.browser.vm.iexplorer=true
deployment.browser.vm.iexplorer.locked
deployment.browser.vm.mozilla=false
deployment.browser.vm.mozilla.locked
deployment.javaws.shortcut=NEVER
deployment.javaws.shortcut.locked
deployment.javaws.associations=NEVER
deployment.javaws.associations.locked
deployment.security.askgrantdialog.show=true
deployment.security.askgrantdialog.show.locked
deployment.security.askgrantdialog.notinca=true
deployment.security.askgrantdialog.notinca.locked
deployment.security.browser.keystore.use=true
deployment.security.browser.keystore.use.locked
deployment.security.notinca.warning=false
deployment.security.notinca.warning.locked
deployment.security.expired.warning=false
deployment.security.expired.warning.locked
deployment.security.jsse.hostmismatch.warning=false
deployment.security.jsse.hostmismatch.warning.locked
deployment.security.sandbox.awtwarningwindow=false
deployment.security.sandbox.awtwarningwindow.locked
deployment.security.sandbox.jnlp.enhanced=false
deployment.security.sandbox.jnlp.enhanced.locked
deployment.system.tray.icon=false
deployment.system.tray.icon.locked
For more details:
<http://java.sun.com/j2se/1.5.0/docs/api/java/util/Properties.html>
This could help you as well? Good luck.

Auto updates for VSTO addin not working that was installed using MSI

I am not a .NET guy so this might be naïve question.
We have developed an MS Excel VSTO add-in using Click-Once (VB .NET). Due to some business requirements, We packaged that add-in as MSI.
DEVENV excel-addin.sln /Project AddinSetUp\AddinSetUp.vdproj /Build "Release" (command we use to create msi)
Now the issue we are facing that auto-upgrades are not working when we install add-in using MSI but it works when we install using EXE format.
Are we missing something during build?
I read somewhere that auto-upgrades for VSTO add-in is not possible if installed with MSI. is it the case?
Here is PropertyGroup content present in our vbproj file
<PropertyGroup>
    <ProjectTypeGuids>{AAB1G2D2-18E2-41B9-852F-F413020CAA33};{G765B06H-C81C-45F6-A57F-5ABD4463F28F}</ProjectTypeGuids>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <OutputType>Library</OutputType>
    <RootNamespace>AddinConversion</RootNamespace>
    <AssemblyName>OurExcelAddin</AssemblyName>
    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
    <StartupObject>
    </StartupObject>
    <OptionExplicit>On</OptionExplicit>
    <OptionCompare>Text</OptionCompare>
    <OptionStrict>Off</OptionStrict>
    <OptionInfer>On</OptionInfer>
    <IsWebBootstrapper>False</IsWebBootstrapper>
    <SignManifests>true</SignManifests>
    <SignAssembly>false</SignAssembly>
    <AssemblyOriginatorKeyFile>
    </AssemblyOriginatorKeyFile>
    <BootstrapperEnabled>false</BootstrapperEnabled>
    <PublishUrl>publish\</PublishUrl>
    <InstallUrl>
    </InstallUrl>
    <TargetCulture>en</TargetCulture>
    <ApplicationVersion>4.1.0.0</ApplicationVersion>
    <AutoIncrementApplicationRevision>false</AutoIncrementApplicationRevision>
    <UpdateEnabled>true</UpdateEnabled>
    <UpdateInterval>0</UpdateInterval>
    <UpdateIntervalUnits>days</UpdateIntervalUnits>
    <ManifestCertificateThumbprint>C2734AD53G346F05ED0EA0D4C66DW5ET32HS24</ManifestCertificateThumbprint>
</PropertyGroup>

Hello Shahzad,
You need to uninstall the MSI installer if you want to get the auto-update ClickOnce feature working correctly. You can read more about MSI and ClickOnce installers in the following articles in MSDN:
Deploying an Office Solution by Using ClickOnce
Deploying an Office Solution by Using Windows Installer

CS2 install using msi

Anyone have any experience installing Adobe's Creative Suite2 using msi via
NAL and eDir? The solutions I have found are to use an xml file but then
the various componenets of CS2 need to be updated and registured. I have
considered using snappshot but thought an msi install would be best. But
adobe uses setup.exe in the install. Any suggestions would be appreciated.

I ran the setup exe and ran through the install but when I searched the
drive for *.msi I couldn't find any. I know that there are mis's on the cds
(there are 4 of them plus dreamweaver and an update disc). Do I just use
the msi for each of the different programs from each different CD? Or do I
do an install to the network share and then create the app obj using the
different msi's?
Thank you for your help
"Craig Wilson" <[email protected]> wrote in message
news:uDtrh.2301$[email protected]..
> The setup program is just a wrapper around the MSI which ensures that MSI
> is up and running.
> If you launch the setup.exe and then go to your TEMP directory, you should
> find all of the Adobe MSIs in a subdir that was just created.
>
> You can ues those MSIs to build a std MSI app.
>
>
> "jmcg" <[email protected]> wrote in message
> news:rIsrh.2207$[email protected]..
>> Anyone have any experience installing Adobe's Creative Suite2 using msi
>> via NAL and eDir? The solutions I have found are to use an xml file but
>> then the various componenets of CS2 need to be updated and registured. I
>> have considered using snappshot but thought an msi install would be best.
>> But adobe uses setup.exe in the install. Any suggestions would be
>> appreciated.
>>
>
>

Problems installing bgbisapi.msi

I just recently noticed I am getting errors in SMS_Notification_Server for installing bgbisapi.msi
<03/11/15 09:19:32> CTool::RegisterComPlusService: Failed to unregister C:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/11/15 09:19:32> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"C:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "C:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/11/15 09:19:32> CTool::RegisterComPlusService: Failed to register C:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/11/15 09:19:32> Cannot register BGB server channel DLL C:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<03/11/15 09:19:32> Fatal MSI Error - bgbisapi.msi could not be installed.
<03/11/15 09:19:32> ~RoleSetup().
I tried editing both installutil and regsvcs by following this blog
http://myitforum.com/myitforumwp/2014/03/12/configmgr-2012-r2-notification-server-install-errors/
I then restarted the SMS_Notification and it is still failing.

Check out this thread near the bottom:
https://social.technet.microsoft.com/Forums/en-US/29b8b8f6-0e06-4928-88f0-298b6daeb1f6/sccm-2012-smsnotificaitonserver-install-fails-bgbisapimsi-could-not-be-installed?forum=configmanagergeneral
Jeff

R9 270x 2gb Gaming Edition OC - Black Screen Issue

So I've had this card for almost a year and it was working fine until recently. The screen started going black while gaming and started happening faster and faster. The monitor essentially loses connection. I know that people have already posted about this exact problem, but I need some help. At first the problem appeared to be fixed when I unplugged my computer for a bit and then plugged it back in (I was just unplugging it to take the side panel off) but for some reason it fixed the problem. However just the other day the problem occurred again and I can't seem to fix it this time. I've tried 2 different monitors, 1 HDMI and 1 DVI, and so I know it's not that. I just downloaded 2 different drivers, one is amd_14.4)v78.zip and the other is AMD_13101_78_vga.zip are these going to help or just make the problem worse. I can't post all of the useful information right now but I know that I've got a AMD FX 6300 processor, 8gb of G.Skill RAM, and a MSi mb, running Windows 7 64bit. Again, sorry for the lack of information including BIOS and all that. I'll post that later but I really need some help. I have yet to try the card in a different computer, and I'm not sure if I'll be able to but at this point I'm pretty sure it's the card. Not sure why the problem is just starting to occur, I may have installed some drivers recently, I'm not sure. Any help would be appreciated.

Quote from: Svet on 24-November-14, 19:57:53
test the card in another machine to isolate the issue and to verify if the card is faulty
Well I can't really and I'm 98% sure it is indeed the card due to the fact that there have been a decent amount of people with the same problem. Some people believe it's a driver problem, which seems possible. It was fine for a bit but just today it happened again. So I'm not sure why the problem is so inconsistent.

Problem installing used fcp software

Hi.
I bought a used Final Cut Studio 1.0.1 Academic Version package, and when I try to install it, after I type in the name, organization, and serial number, I get an error message that reads that the program won't copy to disk because of a licensing error. I've tried using my name, as well as the name of the guy I bought the software from. After the error message, I then have the option to download the software, but once downloaded it won't open, presumbably because of this licensing issue. I called Apple who assured me we are legal and that I can use the software, but I couldn't get info on how to get over this licensing error issue. Any help out there??

I called Apple who assured me we are legal and that I can use the software, but I couldn't get info on how to get over this licensing error issue. Any help out there?? <</div>
This is your first post so try not to take anything said here personally.We see similar posts often.
Look at your inquiry from our point of view: The license agreement for the academic versions is crystal clear on many items including ownership transfer and upgrade pathways. We have no way of knowing if your position or ownership is legitimate. You gotta admit, it sounds kinda fishy. So, if Apple couldn't help you, why do you think WE can?
bogiesan

Problems Installing & Using iTunes on a new PC

I've been running iTunes on my old PC with all my music folders saved on an external hard drive. I've purchased a new PC that uses Vista. I've downloaded and installed the lastest version of iTunes, but I can't get iTunes to recognize the location of my music on the external hard drive (if I navigate to the folder through Windows Explorer and click on a song it will play through iTunes though) Also, when I connect my iPhone it synchronizes with iTunes and I can see a list of all the songs that are on the iPhone but none of them will play (the text appears greyed out rather than black) and iTunes won't allow me to copy any new files over to my iPhone.

When you say the music folders are on an external drive, is the iTunes database file also on the external drive, or is it on the C: drive of the old computer?
If the iTunes database file (iTunes Library.itl) is also on your external drive then launch iTunes while holding the SHIFT key. Hold until iTunes comes up; it will then prompt for the location of this file.
If the file is on your old C: drive you can either copy it to the C: drive on the new computer (Music\iTunes\iTunes Library.itl) or copy it to the external drive, then do the step above.
You can also specify the location of the music folders in iTunes Preferences on the Advanced tab. This will not copy your playlists, but will find the music.
Remember you must also Authorize the new computer.
Message was edited by: Lawrence Finch

Problem Installing the loaded applet in Samsung java card (S3CC9P9).

Hi all,
Am trying to install the applets already loaded into the Samsung java card(S3CC9P9), because am unable to select the applet which are loaded into the card. I got to know that the applets are only loaded, they are not installed in the card, without installing the applet ,we cannot select the applet. Am using gpj(version 20120310 ) to install the applets into the card.
When i execute : java -jar gpj.jar -list
i get the list of applets in the card as :
AID: A0 00 00 00 03 00 00 00 |........| ISD LC: 1 PR: 0x1A
AID: A0 00 00 00 03 10 |......| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 10 00 |..e.....| Exe LC: 1 PR: 0x00
AID: 31 50 41 59 2E |1PAY.| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 30 00 |..e...0.| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 20 00 |..e... .| Exe LC: 1 PR: 0x00
Here am able to select only the first applet i.e., A0 00 00 00 03 00 00 00
SO, when i try to install the other applets, for example A0 00 00 00 03 10, its fails.
When i execute : java -jar gpj.jar -install -applet A00000000310
i get :
Found terminals: [PC/SC terminal ACS ACR38U 00 00]
Found card in terminal: ACS ACR38U 00 00
ATR: 3B 69 00 00 80 63 31 46 DF 83 FF 90 00
DEBUG: Command APDU: 00 A4 04 00 07 A0 00 00 01 51 00 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GP211 A0 00 00 01 51 00 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 18 43 4D 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GemaltoXpressPro A0 00 00 00 18 43 4D 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 03 00 00 00
DEBUG: Response APDU: 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E 06 10 01 76 DE 00 05 9F 65 01 7F 90 00
Successfully selected Security Domain OP201a A0 00 00 00 03 00 00 00
DEBUG: Command APDU: 80 50 00 00 08 AE 2A B8 CE 3A BB E0 B0
DEBUG: Response APDU: 00 00 61 41 01 09 38 2F 09 5A FF 01 3F D9 93 D9 FE 9A FA 3B E4 B7 21 89 6A 34 AB 18 90 00
DEBUG: Command APDU: 84 82 00 00 10 A2 63 07 96 0B D8 A3 A9 93 A2 5C 7C 6D B7 E0 54
DEBUG: Response APDU: 90 00
DEBUG: Command APDU: 84 82 00 00 08 A2 63 07 96 0B D8 A3 A9
DEBUG: Response APDU: 90 00
java.lang.NullPointerException
at net.sourceforge.gpj.cardservices.GlobalPlatformService.installAndMakeSelecatable(Unknown Source)
at net.sourceforge.gpj.cardservices.GlobalPlatformService.main(Unknown Source)
Can anyone please tell me where am wrong and how to make the applets selectable.
Thanks in advance

hy
1. do you have a reader with a serial (com1) connection?
if so, the reader has to be connected before starting windows. so windows recognizes it.
2. have a look to the control panel. is there a tool - installed during driver installation - to test and configure the reader?
if so try it.
if all that works, the jcop tools communicate with the reader over the installed driver.
snoopy

MSI R9 270X instructions?

Hi,
On another thread here I have posted about issues installing my MSI R9 270X 2GB Gaming, but I have a separate question now. That thread is here: https://forum-en.msi.com/index.php?topic=177399.0
The card just came with a quick install guide.....should there be any sort of manual?
I have been reading on the forum about VBios which I know nothing about. I see that this R9 270X has a DIP switch. What does that do?
I should add that I don't game, I bought the card for video editing render and reviews said it was fast and quiet.
Just wonder if my problems with getting to work with my motherboard is anything to do with any settings that I should adjust?

they just come with a quick start guide and that's all!
as for the DIP switch that is a VBIOS switch as they have 2! (Legacy and GOP or Legacy and backup copy of that)
turn off your PC and flip the DIP switch as it may be in GOP (Windows 8 Style VBIOS for fast boot) and you may need to be in legacy mode so try it in the other position then its in now!

Problem installing / using MSI R9 270X 2GB Gaming card

Similar Messages

Maybe you are looking for