Problem installing wiki on Leopard server

Hello.
I have a website to which I want to add a wiki. Have eanbled the wiki feature on server admin. Enabled the open directory service. Created a group on user admin on which selected the website and enabled the wiki and blog services. Restarted the web service and the groups page on the wiki page shows the group I created. But the group link leads to a 404 page. I checked the contents of the default wiki path ("Library/Collaboration') and there is nothing there about the group I created.
What could be wrong ?

I have had the same problem!
1. I setup a group in workgroup manager.
2. Enable the following service for this group on: (server IP address)
3. Checked wiki and blog
4. Checked web calendar
5. Allow (authenicated users) to write services
6. Allow (anyone) to view these services
7. Save
8. Refresh
9. Get severly frustrated at seeing:
a. Enable following services for this group on: (None)
b. Website Showing "No available groups." under the groups tab
P.S.: in server admin:
a. Server ---> Web ---> Sites ---> Site ---> Web Services
-Services for Groups
)Wiki and blog - checked
)Web Calendar - checked
HEEEEELLLLLLPPPP!!! Please!

Similar Messages

I have problem installing my snow leopard

I have problem installing my snow leopard. it says that installing will continue after restart of my computer. But after it has restared, no installation happened. also it keeps ejecting the cd. What am i going to do? I've tried so many times.

as of now, my OS is 10.5.8. I wanted to upgarde it to 10.6 so that i can install the latest itunes.
But, i cant install my snow leopard. it keeps happening and happening again.
My laptop keeps ejecting the dvd. Sometimes i was able to open the dvd and click install. But after I reached "46 minutes remaining", the window will show that the installation will continue after restarting. and when its restarted, the installation did not continue. and im still with 10.5.8.
What should i do?

Wiped my entire macbook drive and now snow leopard won't install over snow leopard server, HELP!

I ordered, what I thought, was Snow Leopard a while ago because I was running Leopard and I wanted to get the app store so I could move onto Lion and then Mountain Lion. I ordered the disc over the phone and the woman sent me the Snow Leopard Server instead of just Snow Leopard, I didn't think much about it so I clean installed it and ran it on my unibody macbook for a while. I didn't see much use for the disc anymore seeing that everything was downloadable at this point, so I sold the disc on Ebay and carried on. The server edition started to slow my computer down due to all of its excess applications and what not, and I read online that Lion and Mountain Lion are also very slow on the old unibody Macbooks so I ordered a regular Snow Leopard disc, now available online, and tried to install it. My computer said Snow Leopard cannot be installed over Snow Leopard server so I went to disc utitlity and wiped my entire drive while the OS X Snow Leopard disc was running and trying to install. I went back to the install window and it still said OS X Snow leopard cannot be installed over Snow Leopard Server so I shut down my computer and tried to turn it back on and I all I got was a blinking folder with a question mark in it, what do I do????????
P.S. All of my content is backed up on an external harddrive so I am all good with that.

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has finished quit DU and return to the installer. Complete the Snow Leopard installation.

Installing PyAIMt on Leopard server

Can anyone provide detailed instructions for installing PyAIMt on Leopard server? Those instructions would be much appreciated by many people here.

you might want to ask this on the py-transports Google groups mailing list.
http://groups.google.com/group/py-transports

Migrating wiki from Leopard Server (10.5) to Lion Server

Is there any way to migrate Wiki Server data from Leopard Server (i.e. 10.5 not 10.6) to Lion Server without upgrading to Snow Leopard first. I'm happy to set up everything else afresh but I've migrated wiki data before and it was a nightmare.
The situation we'll soon be in is needing to migrate wiki data on a PowerPC mac running Leopard Server to a new Power Mac pre-installed with Lion Server.

From: http://images.apple.com/macosx/server/docs/Upgrading_and_Migrating_v10.7.pdf
Need to set up Lion Server first, then:
Copy the wiki data located in /Library/Collaboration/ by default or in the location specified in Server Admin on the v10.5.8 or later server to a local volume Lion Server can access.
Use the following steps to manually migrate your Mac OS X v10.5.8 or later server’s Wiki data to Lion Server.
If you are migrating a v10.5.8 wiki server’s data, make sure Lion Server is bound to the same Open Directory master as the v10.5.8 server, so the ACLs for wikis can convert. If not, wikis are only readable or writeable by admins, and ACLs must be reset.
To migrate wiki data:
1 Start Wiki service in the Server app.
2 Enter the following command.
sudo wikiadmin migrate -r /path/to/collaboration/folder

Problem installing Oracle Identity Manager Server 9.1

Hello,
I try to install oracle identity Manager Server 9.1, but I'm having a problem.
Oracle identity manager 9.03 is already installed with jboss-4.0.3SP1 and j2sdk1.4.2_15
and oracle 10.2.0
So I follow these steps to clean out the db:
1. Drop tablespace: drop tablespace oimtbs including contents;
2. Drop user: drop user oimuser cascade;
and ran prepare_xl_db.bat as instructed. No errors in the log.
I ran the DiagonasticDashboard : the db setup was fine.
When I ran the installer "setup_server.exe", i haved this message :
Folowing Error occured during schema creation
Error encountered while loading database script
E:\OIM_Install\OIM9100\installServer\Xellerate/db/oracle/xell.sql
Please contact your DBA!
maximum key length (1478) exceeded
Does anybody have any idea what this error is about ?
Thanks.

Index IDX_LKV_LKV_ENCODED on Table LKV (Column :- LKV_ENCODED - VARCHAR2(3000)) is failing on 2k block size. Though all the Indexes are working fine with the 4k block size.
But OIM Dev team recommends to create the 8k block size for the Index storage.
Because the blocksize affects the number of keys within each index node, it follows that the blocksize will have an effect on the structure of the index tree. All else being equal, large blocksizes will have more keys, resulting in a flatter index than the same index created in a 2k tablespace. A large blocksize will also reduce the number of consistent gets during index access, improving performance for scattered reads access.
HOW TO CREATE THE INDEXES IN LARGER BLOCKSIZE TABLESPACE
In the existing database:-
Create a tablespace with the 8k blocksize, For Example
First,
Set the system cache size for that particular db block size
sql> alter system set db_8k_cache_size=100M;
sql> CREATE TABLESPACE db_8k_tablespace DATAFILE 'C:/oracle/product/10.2.0/oradata/8k_file.dbf' SIZE 100M BLOCKSIZE 8192;
Then
Reorganize the Index using command:-
sql> Alter Index <Index_Name> Rebuild tablespace <Tablespace_Name>
Regards,
Neeraj Goel

Problem installing ODAC for Oracle Server 11g

I have installed Oracle Server 11g (OS:Windows XP)
Questions:
1. I tried installing ODAC for Oracle Server 11.1.0.6.21, then its giving the following error message: "Oracle data access components can only be installed over an existing oracle server 11g".
2. We have a Monorail application running on NHibernate using ODP.NET. It's working perfectly when I run it on my Visual Studio 2008.
But, when I tried to host this application, it gave me the following error message: "The provider is not compatible with the version of Oracle client"
Please suggest how to resolve these issues.

Hi
Could that be related to the %ORACLE_HOME% ?
I've read that on the ODAC installation guide:
On a machine without Visual Studio .NET 2003 installed, ODAC products now work if they are installed in a new Oracle Home
So it should be performed in a new %ORACLE_HOME% and not the same as the database. Please change that and retry.
Source:
http://www.oracle.com/technology/software/tech/windows/odpnet/install11106.html
On your second question :
Q: I get an error: "Unable to load DLL (OraOps.dll)". How do I fix this?
A: First, ensure the OraOps.dll file is in your Oracle bin directory (e.g. d:\oracle\ora92\bin\). Next, check that your Oracle bin directory is in the Windows system path. If either of these are not present, re-install ODP.NET. Depending on the application, you may have to restart the application (e.g. Windows Service) or reboot the computer (e.g. ODP.NET install makes changes to the PATH) for ODP.NET installation to be complete. If your ODP.NET installation is still not working, you may be running into this problem.
Source:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html#DLL
Let us know if it helps?
thanks
Edited by: Hub on Oct 23, 2008 9:30 PM

Filemaker Pro 6 Client install on Snow Leopard Server on Parallels

Hey Gang,
As per MichaelLAX "Full installation instructions for Snow Leopard Server into Parallels", I have successfully installed SLS on an ML iMac using Parallels 8. Worked great, thank you.
The only issue I am runnig into is we require FileMaker Pro 6 client to be installed and functional. FM installs fine, but the client does not seem to be able to "see" the FM Server which is on the same local network all our other macs operate and access FM on.
I'm sure there is a preference somewhere that is preventing the SLS install of FM from accessing the local network computers as they are also not visible in finder as they would be normally. I have no experience with OS X Server in general, so any advice is greatly appreciated!
Thanks,
Josh

OK: Here is what I did:
I installed FM7 on my Snow Leopard Mac Mini and created a small file called To Do List.fp7. I made it a FileMaker Network server file in the Sharing... Menu under FileMaker Pro menu.
I then opened FM7 in Snow Leopard Server in Parallels 8 on my Lion Mac Mini. Under the File Menu I selected Open Remote... I changed View to Favorite Hosts.
Then I clicked the Add button. Then for Host's Internet Address, I entered the IP for my Snow Leopard Mac Mini (in this case 192.168.0.151) and gave it a Favorite Host Name (To Do). I clicked Show All Available Files for this Host and clicked Save.
My server file To Do List.fp7 is now visible in the window and I can click Open.
In my case, since I have only one licensed serialized copy of FM7, it recognized that I was using it twice and told me that error and then quit.
But in your case, you should now be able to open your local area network served FM files!
[click on images to enlarge]

Stuck on gray screen on install of snow leopard server....

6 core 3.3 ghz, Mac Pro, running snow leopard server.
I need to change from my current RAID5 config to RAID0. How I wanted to proceed;
1) make TM backup
2) reinstall 10.6 server from installer disk (not the machine specific one, as I lost it, and apple made me pay for a new copy even though Im still under applecare)
3) change RAID config during install
4) repopulate from TM during install
Unfortunatly.....
The installer never got past the initial apple gray screen (no time bar either).
So.....
I tried cloning the installer disk to an external usb, and booting from that.......no luck
I tried removing all my drives except 1 (3 were in raid 5, 1 was stand alone), and trying to boot off both the the usb and the dvd, no luck.
(note, when I hold down option during startup, it does see the dvd installer in the drive, and it allows me to boot from it, it just never starts the installer)
Then I tried...
Cloning a minimum version of my current system onto a usb, booting from that, then formatting my 4 drives and RAIDing them to RAID 0.
Then booting the installer.....no luck
Then I repopulated the new RAID0 array with my minimum system version, so that I had an OS back on the RAID array
Then booting the installer......no luck
(and reset PR all the time....)
I do not want to go through and drag and drog hundreds of folders from TM to the new system.
I want to resintall from scratch, and have the installer repopulate from my TM backup (because that's its job!)
any suggestions?
(frustrated)
-a

"Look at that article. It says if you have a Mac OS X 10.6 running on your Mac's Hard Drive, and double-click on Install Mac OS X Server Icon on the DVD, it will give you a INSTALL button instead of a RESTART button (beacues you have a LATER version of Mac OS X already Installed on the Hard drive)."
Yes, that's what I see now, and it hangs as stated.
Even if it says "Install" when you click "Install" it then goes on to inform you, that it will restart to begin the installation (where it hangs)
BUT I also tried WIPING the entire system (no OS whatsoever), reformatting the drives using a bootable usb (so NO OSX running on my Mac's hard drive), and it still hung.
The bottom line is, no matter how you install, it has to restart the machine in order to unmount the startup disk, and boot from the DvD.
Booting from the DvD, makes it hang
"Do you have your "bare-bones" Mac OS X fully updated to 10.6.8? If not, I suggest you do that first."
Yes it is.

Fresh Install, Fully Updated Leopard Server Keeps rebooting on its own

Just upgraded to Leopard Server from Tiger.
Fresh, new install, fully updated.
Only software installed is Retrospect 6 and Drobo client.
My Server keeps rebooting by itself after 5-10 after logging in.
Won't reboot on it's own if I don't log in. The services are running in the background.
But once I log in as admin, after 5-10 mins, it will reboot on it's own.
Any ideas are where I should start looking on how to resolve this?

You're going to get to try to isolate this.
Any details from the crash report? (Applications -> Utilities -> Console.) Basically you're going to have to dig around in the crashes, and (if there's nothing obvious there) then, well, "try different configurations and different stuff".
This could be bad memory or a bad sector somewhere on the disk, for instance. Or a bad processor. Or a corrupt file. Or a bug in whichever Leopard Server baselevel is involved here.
Some steps and some options...
Disconnect all external hardware.
Run the hardware diagnostics for whichever box is involved here.
See if the box crashes if you log in as some other user.
See if the box crashes with no external hardware, or with no network connected.
If the box isn't under warranty (and any user crashes the box) (and if you're familiar with and comfortable with working inside static-senstive electronics gear), crack it open and reseat everything.
If the system is available to restore or you can blank and install, reinstall everything and leave both Retrospect and Drobo, and see if it crashes. Then add one or the other and see if that crashes stuff, rinse, lather and repeat.
Or you can call up Apple and ask for help.

Problem installing Oracle Identity Manager Server

Hello,
this is my first time trying to install this product, and I'm having a problem.
I'm installing it on my development box - Windows XP.
I set up Oracle 10g Release 2, created a database instance,
and ran prepare_xl_db.bat as instructed. so far so good.
When I ran the installer "setup_server.exe"
it displayed this error message:
Following Error occured during schema creation connected
ERROR loading database script
.......\OIM9.0.1.1\installServer\Xellerate/db/oracle/xell.sql!
Please contact your DBA!
ORA-00600: internal error code, arguments: [12259], [], [], [], [], [], [], [] [10/18/06 6:16 PM]
so, I aborted the installation.
I recreated the database instance, and tried manually running xell.sql using sqlplus to see if I can reproduce the error, but it worked fine.
I only get the above error whenever I use the windows installer.
Does anybody have any idea what this error is about and how to work around?
I would really appreciated it. Thanks.

HI,
As a check of db setup before installing the server
1. Did you run the DiagonasticDashboard to check if the db setup was fine?
if not it is worth the try.
Just for you info, proper way to run the prepare_xl_db.bat is
in the command prompt change the directory to where the prepare_xl_db.bat resides.
$<dir where bat exists> prepare_xl_db.bat orcl E:\oracle\product\10.2.0\db_1 oimuser abcd1234 oimtbs E:\oracle\product\10.2.0\oradata\orcl oimtbs_01 TEMP abcd1234
· Where prepare_xl_db.bat <ORACLE_SID> <ORACLE_HOME> <XELL_USER> <XELL_USER_PWD> <TABLESPACE_NAME> <DATAFILE_DIRECTORY> <DATAFILE_NAME> <XELL_USER_TEMP_TABLESPACE> <SYS_USER_PASSWORD> are the switch options.
· This will create the OIMUSER database account, create the OIMTBS tablespace, grant privileges to the user, and specify other database settings.
Install the Diagonastics Dashboard
Assuming you are using JBoss
Strop JBoss server
1. copy <OIM dir>:\OIM_Installs\oracle_identity_manager\DiagnosticDashboard\XIMDD.war <JbossDir>:\jboss-4.0.2\server\default\deploy
2. Start JBoss
3. Wait for JBoss to finish starting completely.
Verify database from Diag Dashboard
4. Access Diag Dashboard from your favouriate browser http://<Host>:<port>/XIMDD
5. In the browser, click Diagnostic Dashboard
6. Select the Test Name: Oracle Database Prerequisite Check and enter your db values.
7. click Verify and analyze the response
Hope this helps!
-Bala

Installing Mac OSX Leopard Server 10.6 on a Mac Air

Hi
Im trying to install Mac OSX Server 10.6 on a Mac Air which have Lion developer preview 4 on it, i try to install from
a .dmg file thats stored in the downloads folder when it runs it give me a message "resturt to begin installation" with a
restart button, i click it and then computer restarts and nothing happens why ?
also the server file is big 7 GB so i failed to burn it on dvd or copy to external hard disk and install from there

You will want to use a external double-layer (DL) DVD disk that you've recorded, or use an external disk configured to boot the distro.
Also make a full backup of your boot disk before you load this, as there is no "downgrade" option to get back to whatever version of Snow Leopard client you might be using on the box.
Please (also) read the HT4313 support article.
And for completeness...
This particular configuration isn't supported by Apple.
Mac OS X Server doesn't "like" DHCP addressing, and that can be common on portables.

Problems installing an iFolder slave server

Hi,
I have an iFolder 3.8.4.0 master server configured and working with an AD server. I am now trying to add a second iFolder server as a slave in this iFolder domain. I'm running simias-server-setup and choosing "Y" when I get to the "Slave Server?" prompt. I'm putting in the same iFolder admin user and proxy user and passwords that I used for the master server. However, I get a failure at the end that indicates a credential error. Since the conversation is SSL-encrypted, I can't get much useful information in a WireShark trace. I should note on this same server, if I configure it as another master, it works perfectly against the AD server with SSL, so I'd have to believe the SSL cert for the AD server is properly imported. Is there any type of debug logging I can enable or more detailed output tracing I can do to determine why this is failing?
Here is the error at the end of the simias-server-setup script:
----------- excerpt ---------------------
Ldap certificate :
Mono Certificate Manager - version 2.6.4.0
Manage X.509 certificates and CRL from stores.
Copyright 2002, 2003 Motus Technologies. Copyright 2004-2008 Novell. BSD licensed.
X.509 Certificate v3
Issued from: DC=local, DC=wwt, DC=test, CN=testad1
Issued to: CN=TESTAD1.test.wwt.local
Valid from: 02/06/2012 05:20:54
Valid until: 02/05/2013 05:20:54
----- ACCEPT LDAP CERTIFICATE -----
Accept LDAP Certificate? [Y]:
Done
Connecting to ldaps://10.2.2.164/...
at Novell.Directory.Ldap.LdapResponse.chkResultCode () [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.chkResultCode (Novell.Directory.Ldap.LdapMessageQueue queue, Novell.Directory.Ldap.LdapConstraints cons, Novell.Directory.Ldap.LdapResponse response) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (Int32 version, System.String dn, System.SByte[] passwd, Novell.Directory.Ldap.LdapConstraints cons) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (Int32 version, System.String dn, System.String passwd, Novell.Directory.Ldap.LdapConstraints cons) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (System.String dn, System.String passwd, AuthenticationTypes authenticationTypes) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (System.String dn, System.String passwd) [0x00000] in <filename unknown>:0
at Novell.iFolder.Utility.LdapUtility.Connect () [0x00000] in <filename unknown>:0
at Novell.iFolder.SimiasServerSetup.SetupLdap () [0x00000] in <filename unknown>:0
Removing slave from master
Url https://testif1.wwt.com/simias10/HostAdmin.asmx
Url https://testif1.wwt.com/simias10/DomainService.asmx
Failed
LdapException: (49) Invalid Credentials
LdapException: Server Message: 80090308: LdapErr: DSID-0C0903AA, comment: AcceptSecurityContext error, data 525, v1772
LdapException: Matched DN:
at Novell.Directory.Ldap.LdapResponse.chkResultCode () [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.chkResultCode (Novell.Directory.Ldap.LdapMessageQueue queue, Novell.Directory.Ldap.LdapConstraints cons, Novell.Directory.Ldap.LdapResponse response) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (Int32 version, System.String dn, System.SByte[] passwd, Novell.Directory.Ldap.LdapConstraints cons) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (Int32 version, System.String dn, System.String passwd, Novell.Directory.Ldap.LdapConstraints cons) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (System.String dn, System.String passwd, AuthenticationTypes authenticationTypes) [0x00000] in <filename unknown>:0
at Novell.Directory.Ldap.LdapConnection.Bind (System.String dn, System.String passwd) [0x00000] in <filename unknown>:0
at Novell.iFolder.Utility.LdapUtility.Connect () [0x00000] in <filename unknown>:0
at Novell.iFolder.SimiasServerSetup.SetupLdap () [0x00000] in <filename unknown>:0
FAILED
In troubleshooting this error, I've noticed that when I re-run the simias-server-setup and point to the existing location of the Simias.config file that was partially created, when it gets to the point where it asks the admin user dn, it inserts an additional "dc=test" in the string below when it auto-suggests the admin user in [brackets]:
cn=ifadmin,cn=Users,dc=test,dc=test,dc=wwt,dc=loca l
I found this line in the master server's Simias.config file and corrected it to reflect the proper dn for the ifadmin user:
cn=ifadmin,cn=Users,dc=test,dc=wwt,dc=local
I then re-ran the simais-server-setup, and this time it auto-suggested the correct path, however it fails with a different error that states the admin user is in an invalid context, and it shows the "cn" of Users as an "ou":
cn=ifadmin,ou=Users,dc=test,dc=wwt,dc=local
So something is different between the master and slave configuration in the setup program, but I can't tell what I need to enter to make it work. Any suggestions would be greatly appreciated!!
Best regards,
Greg

I was eventually able to resolve this issue myself. In an effort to help someone else if they should have the same problem, I will relay the details. What I ended up doing is opening the port in my firewall between the iFolder server and the AD server to allow LDAP cleartext (389) and then running a WireShark trace on the AD server to see what was actually going on. As is typical with software installation problems, the problem turned out to be rather simple, however the logs didn't really give enough detail as to what was failing (see above, which is all I got when it failed).
I had already found out anecdotally when re-running the install script that I had one typo in the master iFolder server's Simias.config file (an extra "dc=test" somehow got inserted into the path of the "iFolder admin user" (ifadmin in our case)):
cn=ifadmin,cn=Users,dc=test,dc=test,dc=wwt,dc=loca l
I found this line in the master server's Simias.config file and corrected it to reflect the proper dn for the ifadmin user:
cn=ifadmin,cn=Users,dc=test,dc=wwt,dc=local
I then re-ran the Simias-server-setup, and this time it auto-suggested the correct path, however it fails with a different error that states the admin user is in an invalid context, and it shows the "cn" of Users as an "ou":
cn=ifadmin,ou=Users,dc=test,dc=wwt,dc=local
What I didn't see until I did the wireshark trace is that after the slave server contacts the master server on it's SOAP URL, it pulls down the LDAP search contexts that are configured on the master, and it then tries to verify each one against the LDAP server. If it gets to one that does not verify, it bails and ends with the "LDAP Credentials" error seen on my earlier post. The thing I was confused on, is the "second" error shown just above, where it changes "cn=Users" to "ou=Users" in the dn for the ifadmin user. That turned out to be another line in the LDAP search contexts pulled from the master's Simias.config file. That was configured in the file as "ou=Users,dc=test,dc=wwt,dc=local". Someone familiar with LDAP and eDirectory, like myself, won't immediately find anything wrong with that, since "users" is a container, and in our way of thinking really is an "OU". For AD, for whatever stupid reason, Microsoft decided that the "users" container is a "CN", whereas the "groups" container is an "OU". Nice consistency. My Master server worked with this typo, because we don't have any production users under the "CN=users..." container (except ifadmin, which is called out by FQDN earlier in the config file), so it never needs to search in that container anyway. In the WireShark trace, you could see the AD server failing on validation of that OU (err, I mean CN) of "Users", and that is where the simias-server-setup script bombed. An extra properly-worded line of explanation in the setup script would have prevented a few hours of hair-pulling, but at least it's working now. Hope it helps someone in the future.
Best regards,
Greg

Problems installing Dreamweaver on Terminal Server 2008

Hi,
We are running a Terminal Services server with Windows Server 2008 and have successfully installed many programs that end users can run via Remote Applications and they all work.
I have recently installed Dreamweaver on the Terminal Server, but failed at the first hurdle as I could not get it to run on the terminal server logged on as administrator. I click on the link to the program & nothing happens, when I check in Task Manager there is nothing listed in the list of applications, but dreamweaver is running as a process. If I click on it again, I get another process running, and so on...
We have a site license for the whole CS3 Design Premium set of programs and we usually run the installed program, enter the license key when prompted then all other installed CS3 programs run on that workstation. However, I cannot even get this program to prompt for the license key.
Does anyone have any ideas where I am going wrong?
Many thanks

In the US - Adobe Install Problems 800-642-3623

Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv

I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers.
After installing disk 1
Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page
http://bmlfileserver:8080/CmcApp/
anyone have any idea why? why does it not prompt for the second CD?
Is this a compatibility with Windows Server 2008?

I'm attempting to install CRS 2008 on Windows Server 2008 as well, and I'm running into a few issues. Did you ever get yours resolved? I started by trying to use IIS, but I'm uninstalling it completely now and will try Tomcat instead. Which route did you go?

Problem installing wiki on Leopard server

Similar Messages

Maybe you are looking for