Problem installing Windows 7 64bit using bootcamp

Hello all,
I am sorry to ask a question that has probably been asked many time. It almost three days that I am browsing all possible forum but I have not been able to find the solution to this particular problem.
I am trying to install Windows 7 Ultimate 64 bit on a 27" iMac (late 2009) with Mountain Lion operating system. So, let's start from the beginning. I have used BootCamp assistant to partition my hard drive following all the possible official instructions on how to install Windows using Bootcamp. The Bootcamp Assistant successfully partitions my drive, the computer restarts automatically and the windows 7 installation starts correctly using the inserted DVD. The windows installation goes on perfectly, the computer restarts a couple of times but after the last restart I see the "Windows starting" window than my screen goes black and nothing happens anymore.
After some research I found some instruction on hoe to download the Windows drivers on a USB key and I followed all the steps suggest her . The problem is that I can't even get to the point where I can install my drive from the USB because I have never been able to actually complete the Windows installation. I tried rebooting the the Boot Manager but my Mac does not see my USB drive (Sony 8gb).
Can someone please help me? This issue is driving me nuts and I really need to urgently use Windows.
Many thanks to all for the help, in advance

The Mountain Lion Windows Support drivers are available from within Boot Camp Assistant as a download. Start Boot Camp Assistant and select the option to download the Windows Support Software. Follow the instructions for saving the downloaded support software. When you boot into Windows make sure the device containing the drivers is inserted into a usb port and your Windows dvd is not in the computer. Windows will boot from your installed Windows on your hard drive and it will install the support software from the usb tick.
You should visit the Boot Camp forum where installing Windows and the Windows Support Software is explained in hundreds of posts.
https://discussions.apple.com/community/windows_software/boot_camp
And here is the Boot Camp help files in case you were unable to find them.
http://www.apple.com/support/bootcamp/

Similar Messages

  • Problems installing windows 7 using bootcamp

    i downloaded.iso Windows 7 Home Premium x64 English fromhttp://www.w7forums.com/official-windows-7-sp1-iso-image-downloads-t12325.html. It starts off smooth but gets half way through downloading windows support and stalls every time. What should i do?

    Thanks for the suggestion Rudegar.  I think I found the problem which was from a different source.  I installed an external hard drive and initated Time Machine in my Mac OSX.  While it worked fine for Time Machine when running Mac OSX, apparantly it was causing a problem with Bootcamp and Windows.  When I realized this might be the problem, I sejected the drive in OSX and turned it's power off.  I then shut down OSX and started up using Bootcamp and Windows as I has in the past with no problems.
    Thanks ayway!

  • Installing Windows 7 using bootcamp help

    Hi all,
    I am planning to install windows 7 using bootcamp to play PC games only, as love mac software for everything else, and want to make sure that all will run smoothly before i buy the required stuff.
    I am running OSX 10.8.5 on my iMac, which has a wireless keyboard, wireless trackpad, and wireless mouse, and a connected external superdireve (for CD's and disks, sorry to patronise just wanting to be clear ) and wanted to know if i can install windows using a disk that i buy in a normal pack, as i have heard that the external drives can have problems?
    All advice much appreciated!

    this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
    the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
    the only other option is to purchase a key.
    you say a 30 day trial, does it give you a temporary key for this?

  • Installing Windows 7 Using bootcamp 5.0 on MBPr OSX 10.8.2 Black Screen Not Loading Windows 7 Install on Boot

    I am trying to install Windows 7 using Bootcamp Assistence 5.0 on a MacBook Pro Retina OSX 10.8.2, I went through all steps on Creatting the Windows 7.iso into a bootable USB Dirve 16GB I use a separate USB Drive 2 GB and download Windows Support Drivers Step 2 on bootcamp assistence. I run into the problem in step 3 when the computer reboot I just get a black screen the back display still on like I can still see the apple on the back lit up, but the screen is black and wont load the window installer, if i shut it down and bring it back up i get error saying IOS not found so then i have to shut it down, enter recovery and restart on osx partition, i can see that the bootcamp partition was created but cant load windows to it. Please can anybody help me or guide me on what i am doing wrong? thank you so much in advance

    this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
    the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
    the only other option is to purchase a key.
    you say a 30 day trial, does it give you a temporary key for this?

  • HT4407 Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?

    Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
    My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
    Regards Swishi...p.s If anyone can help me...it'll make my day :3.

    ONE PARTITION.
    You don't need to buy anything but you should have backups.
    you can delete #2 you created. Then resize to full drive.
    There are already
    GPT
    EFI
    Mac
    Recovery
    and there needs to be Windows which cannot be higher ID
    Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    Installation Guide  Instructions for all features and settings.
    Boot Camp 4.0 FAQ  Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ  Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/

  • How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

    Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
    I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
    I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
    But reading more on it, I think I was supposed to use Bootcamp to do it for me...
    I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
    I had a partition so thought Bootcamp wasn't required for my needs.
    But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
    and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
    I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
    But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
    So I need to know the following:
    1) How to know I'm broadcasting my SSID - where do I find this in settings?
    2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
    3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
    One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
    And that is my main task - getting the Internet up and running in Windows 7.
    Other Info:
    I'm running Mac OS X 10.6.8 with 2 GB of memory.
    I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
    I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
    Hope you can help.
    Thanks.

    I tried something that worked for me...
    Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
    So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
    Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
    That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
    I didn't need the AirPoirt Utility at all (at least, I never went into it).
    Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
    Hopefully my solution helps others.

  • HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD."  I thought my install disk was for 32 or 64 bit.  What does this mean?

    When Installing Windows 7 using Bootcamp, I get message:  "Need 64 bit Windows installation USB drive or DVD."  What does this mean?

    It means you need the 64 bit Version of Windows on a USB stick or DVD.

  • I want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

    i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

    "At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
    That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
    Personally I would double these amounts and add to that the diskspace needed for your Windows games.
    Stefan

  • How to install windows 8 using bootcamp with no optical drive

    Hi,
    I have a mac book pro 17" late 2011 with Mountain Lion installed.
    I have previously installed a windows 7 using bootcamp without an optical drive by creating an install disk as part of boot camp option.
    I still don't have an optical drive.
    The other day I removed my Windows 7 since I want to try Windows 8 but when I try using boot camp to install windows 8 it is asking for an optical drive and the option to create an install disk is not available anymore.
    Any idea on this issue?
    Thanks much

    Windows 8: enable Hyper-V, it really helps.
    http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/
    http://www.windows-now.com/blogs/robert/hyper-v-3-0-confirmed-for-windows-8-clie nt.aspx
    http://www.windows8update.com/2011/12/06/enabling-hyper-v-in-windows-8/ 
    http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
    Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems
    http://www.howtogeek.com/107173/disable-windows-8s-adaptive-brightness-to-fix-da rk-screen-problems/
    It should be straight forward and no different, except you are burning an ISO and that always needs to be done at slowest burn speed for any version of Windows.Otherwise it won't work (even if it manages to install it will fail on restart or some other point).
    Windows 8 Release Preview
    http://msdn.microsoft.com/en-us/windows/apps/default
    https://blogs.msdn.com/b/b8/?Redirected=true

  • Problem installing Windows 8 via Bootcamp on MacBook Pro 13 (late 2009).

    Hello,
    I've installed Windows 8 Pro on my MacBook Pro 13 (Late 2009) which does not support Windows 8. I've started installing Windows 7 via Bootcamp, then interupted the installation and pluged-in the Windows 8 Disk, and after formating the partition, I've installed Windows 8 64-Bit.
    Here is the problem. The Windows works fine, BUT after restart when I hold 'Alt' and choose EFI Boot (Windows 8's partition), Windows 8 starts loading but then suddenly there is a white flash and it restarts again. So after shut down or restart I cannot boot it.
    Do you think that this is because I do not have Bootcamp installed on the Windows 8?
    I've downloaded the supported software for Windows 8, but when I click setup.exe, it is giving me the following error:
    This version of Bootcamp is not intended for this computer model. I've been trying to install it for more than 78 hours, so I'll be extremely gratefull to whoever help me. Thank you in advance.
    P.S. Mac OS X partition boots fine.

    If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

  • Problems Installing Windows XP in Bootcamp

    Good Morning,
    I just received a new Mac Pro Dual Quad 8gb ram and 4x1TB HDD with internal Raid card at work. Our office and software require Windows XP to be installed (Truely wish it was Mac compatible) and when I attempt to install Windows XP in bootcamp, it creates the partition on the Mac OS drive and starts to go into the Windows Install screen. It finishes loading all the drivers on the disk and when it goes into the install portion, it does not see any drives or partitions. Is there something I am overlooking or is there a problem? Thank you for your time and effort in this matter.

    Hi and welcome to Discussions,
    is that the Apple Raid card ?
    The Apple Raid card does not support the installation of Windows on it http://support.apple.com/kb/HT2855
    Sorry
    Stefan

  • I just installed windows 7 using bootcamp.  My sound is not working.  any tips?

    so, As my title says, I just installed windows 7 using boot camp.  However, My sound is not working.  at all.  This is a problem as most of what I do involves sound.
    any tips to help me out?

    you, or we,still need to install audio driver, likely Cirrus,
    "macbook pro windows cirrus audio driver"

  • I installed windows 8 using bootcamp but can't get back to the apple side.  The windows side can not find the bootcamp app

    I installed windows 8 using boot camp assistance.  I finished and it looks like windows installed successfully.  When I search for boot camp.  It doesn't find it.  When I restart the computer it comes up in windows.  How do i get back to the apple side?

    You did made a backup before you started all of this with BootCamp, didn't you?
    One missed step with BootCamp and the whole Mac side of things can disappear.
    I thought a Recovery boot and Disk Utility would be the quickest way to find out what you did.
    Allan

  • Can I install windows 7 using bootcamp on a mac with two user accounts?

    I'm asking because I share a MacBookPro (13inch Mid2010 / Lion) with my girlfriend so we have two user accounts.
    If I install windows 7 via bootcamp can we both switch to windows?
    Thanks in advance
    Frank

    Yes you can, you can even have 2 users on the Windows side, his n hers

  • Problems installing Windows 7 using Boot Camp

    I have a brand new MBP Retina laptop (late 2013) with 256GB SSD. Today I tried to use Bootcamp Assistant to partition the SSD and install Windows 7 64 bit OS.
    My first attempt was using a licensed Windows 7 64 bit installation DVD and my OWC external optical drive which is recognized in Finder:
    I started Boot Camp Assistant, selected the boxes to download latest Windows Support Software from Apple and to Install Windows 7. I was asked to specify the size for the Windows partition and hit continue. The process was moving along, the  computer restarted and then I got a black screen with a blinking white cursor (like a command line prompt) in the upper left corner of the screen and a message to press any key to reboot. Pressing any key did nothing.
    As far as I could tell, the Support Software files that were on the USB drive did get installed prior to the first reboot of the system that happens after you allocate the size for the partition. After the first reboot I never got the Windows installer though, just the hanging black screen/cursor mentioned above.
    I'm wondering if, after creating the partition and restarting, my computer can't see my external optical drive even though it does show up in Finder when booted to OSX because it was not reading the Win7 Install DVD at all.
    While on the phone with Apple Senior Tech Support we rebooted several times holding down the Alt/Option key. The boot options were the OSX, Recovery, Windows, and EFI Boot. Choosing Windows resulted in the trackpad locking up and it just hung there. I ended up reverting the SSD back to a single partition for now.
    After some discussion on the Apple forum I tried creating an ISO file from the Win7 64 bit DVD using ImgBurn software that I have installed on my Windows PC  and ImgBurn indicated it had created a bootable ISO file. I copied the ISO file to the downloads folder on the MBP, plugged the empty USB drive into the MBP and tried Boot Camp Assistant again:
    Choosing the appropriate option for use with an ISO file on a USB drive Boot Camp Assistant proceed to again create the partition, asked me to size it, and then it proceeded (over approximately an hour and a half) to work on copying the ISO file to the USB drive and downloaded the Support Software to the USB drive.
    After the restart I got another black screen, cursor, and the messages, "No bootable device/drive found", "Press any key to reboot". Again pressing any key did not do anything. I reverted back to a single partition again, rebooted to OSX and gave up for the night.
    Bottom line in either scenario is that I never get to the Windows installer screens to even attempt to install Windows on the new partition.
    QUESTIONS:
    I think in my situation it doesn't appear that ImgBurn created a bootable ISO file from my Win7 install DVD. The Apple Bootcamp Setup guide refers to downloading the ISO image from Microsoft but I couldn't find anything that I would be comfortable downloading.
    I'd rather use my installation DVD for Windows but why isn't that process of reading the DVD from the external drive working after the restart?
    Can the ISO file and Windows Support Software live on the same USB drive during installation and does the support software get installed automatically by boot camp assistant?
    What am I doing wrong here? This shouldn't be this hard especially when I own a valid copy of Windows.
    This is VERY frustrating. Any help or referrals to proper instruction is very much appreciated.

    I was able to successfully complete the installation of Windows 7 Home Premium using Boot Camp. Turns out the problem was the Windows 7 ISO image I was initially trying to use. I called Microsoft tech support and they sent me a link (see below) from which I downloaded the Windows 7 Home Premium 64 bit ISO image. After downloading the ISO image and restarting Boot Camp Assistant the process of Boot Camp preparing and transferring the ISO image and Windows Support software to the USB drive took about 45 minutes and then everything went smoothly from there. The only thing I encountered was when I was asked what drive to install Windows on I got a message that it couldn't install on the Boot Camp drive because it needed to be in NTFS format. I clicked on the format button and then the process continued. After Windows installed the Windows Support Software from Apple started to install automatically. So far it is working well.
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windo ws-7-home-premium-64bit-iso-download/709dcc12-d120-435d-91cd-52e1dd0f4c24

  • Unable to log in to user account after installing windows 7 using Bootcamp

    Hi everyone,
    I need help. I have been at it for days, I have googled every which way but I am not able to fix this. Basically my problem is that I am unable to log in to my user account after I used Bootcamp to install windows 7. I will explain what I did up until I couldn't log in.
    I backed up my user account using Time Machine(I was logged in as the user). The account had FileVault activated and I neglected to disable FileVault before back up. I just didn't think to, it did not even occur to me! Then I partitioned Macintosh HD, I was doing this with my step son and he thought we were supposed to partition the hard drive first before running Bootcamp! After that was done, I couldn't run Bootcamp because obviously we had whipped the HD clean! Anyway, I reinstalled the OS X using the internet, after which I run Bootcamp and successfully installed windows 7. Then I went on to restore my account using Time Machine, only when I try to log in I get the error message "you are unable to log in to the user account at this time". I tried every possible solution I could find on here, including creating a new admin account, deleting the old account but saving the user folder and then routing the new account to the old user folder. Still nothing. I have tried logging in as a root user, reset the master password and deleted FileVault files from Library/keychain in the hope I would access the user account, but to no avail. What's more is that I can't even see the sparse bundle or sparse image files that people keep referring too. I can't even find it on the Time Machine back up! I then thought I would cut my losses and try system recovery using Stellar Phoenix Mac Data Recovery (cost me £81) but it did not recover any of my photos, music, videos or documents.
    I honestly can't come to terms with the fact that I am unable to login to an account with 3 years worth of pictures and documents. I am having a hard time letting go. Is there anyway possible to crack this?
    Thank you in advance.
    By the way, I am running Mountain Lion OX 10.8.4 on MacBook mid 2010

    I have this exact problem. Installed Bootcamp on a networked iMac running Mountain lion and and can no longer log in to my Mac user account. Would love if any of the pro users on here can shed a bit of light.

Maybe you are looking for