Problem intel HD 4400 monitor 13 inches - defect of the resolution on "windows photo viewer"

Hello to all the community!
I have a Lenovo yoga pro2.
model: 20266
(i74510U - 2ghz - RAM 8gb - Windows 8.1 - total memory available 1792 Mb - resolution monitor recommended 3200x1800).
When I open the same image with "windows photo viewer" for example on the 15-inch monitor the result is ok (Windows7)
Click here to view image.
whereas on the my Lenovo from the 13-inch monitor the visualization is very small. On my Lenovo the menu buttons of "windows photo viewer" are also very small from see (see rectangles highlighted in red)
Click here to view image.
I tried to change all the settings the user side at my disposal, but the problem persists.
Same thing on the graphics program PAINT.NET. All the menu bars, commands, icons, etc, are displayed very small.
You need to make some changes advanced on the card 4400?
Can you help me?
Thanks
Mod's Edit: Image(s) converted to link(s) due to size. Photos are limited to 100k size per forum guidelines.
Please refer to About Posting Pictures for more information.

This is unfortunately often an expected behavior for an High-DPI display like the Yoga 2 Pro has (using the same machine btw.). Because the Display on the Lenovo Yoga 2 Pro has far more pixels on the same area, each pixel is a lot smaller as on other displays. So a control element with 200x200 Pixels looks a lot smaller than on another screen with a lower resolution. The apps have to take this in account, so that they render those elements with more pixels on a High-DPI screen like the one the Yoga 2 Pro uses. If so they are described as dpi-aware. I don't know if the Photo Viewer in Windows 8 is dpi-aware or not and I cannot test this as my machine is already running Windows 10. But as for paint.net I know this one is perfectly dpi-aware and should look just fine. I have it installed myself on this Yoga 2 Pro and it looks just fine to me. This scaling that dpi-aware Apps and windows elements do can be adjusted in the Control Panel. How you do that is described HERE with Option 1 and the steps 1-5 (skip the other steps and especially option 2). Just move the slider shown in step 5 to "larger". You have to log out and in or restart the machine to let the new setting take effect.

Similar Messages

Windows photo viewer - problem with JPEG files

Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014

Hi,
According to your description,please re-associate the .jpeg with Windows photo viewer.
1.Open Control Panel\All Control Panel Items\Default Programs\Set Default Programs.
2.Click Windows Photo Viewer, and choose defaults for this program, check the .jpeg, and then click Save.
3.Next,click Windows Photo Viewer again, and click Set this program as default.
As you said, when you tried to right click on a JPEG, Windows Explorer stopped working.
I suggest you use ShellExview to remove the third-party shell extension.
http://www.nirsoft.net/utils/shexview.html
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Regards,
Kelvin Xu
TechNet Community Support

Why cant I rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

why cant i rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

Windows do not repect the digital EXIF specification. Use a free viewer http://www.irfanview.net/ for Windows.

Windows Photo Viewer and dual monitor slideshow

Why does Slideshow only works on a main display?
why can't i move Photo Viewer to the secondary monitor then start slideshow there? if i do that in Win7 RC the secondary display will turn all black and the main one will start the slideshow.

that seems to have worked for me, but the inactive screen is still blackened, do you think the photo viewer doesn't fully support dual monitors? I also noticed the picture is the same display size as the primary monitor, as in whatever size is is during
a slideshow on the primary is the same when switched to the secondary.
I could juy st tap the window key to get the primary back, but then the unused portions of the secondary revert to the background...this seems like a strong candidate for a windows update that actually changes the way the OS works... can I has some cash
now?
hey, MS, WTF?
pictures viewer unable to work with few monitors?
i checked - by pressing "Window Key+Shift and tap either the left or right arrow"
it changes monitor, but other one hold black!
i checkerd win7, win2008srv, win2003

Problems with Itunes 11.1.5.5 and the pop up windows.

Hi. First post here. Is anyone else having issues within Itunes where the pop up windows (such as get info or get album artwork) are layered behind the Itunes window? I have to reduce the window size and drag Itunes window to the lower corner of the screen to see the editing window and select it to show on top. Shouldn't it pop up on top of the window automatically? The right click context menu does, so it would seem to me that this is an issue within Itunes and not Windows 8.1. Any help would be greatly appreciated, as this is quite frustrating. Thanks

Ok, just figured out how to get rid of AMDS... go to control panel...click on AMDS....choose REPAIR ,let it run through. if you see IGNORE pop up, hit it...it asked me 3 times i hit ignore 3 times. when it is done, go back now and choose to UNINSTALL it. this worked for me.....still cant download itunes though

Graphics problems with my second monitor...

Ever since I updated to Lion, I get some display problems with my second monitor (a Samsung LED XL2370).
Single windows appear darker and with bad graphics, especially when dragging from the normal monitor to the external one or openign them..
And after 'waking' my MacBook from sleep today, the background image of the normal display was missing. It was just a grey screen, but perfectly functional. And nothing changed when I checked the display settings and tried changing the background.
Any ideas??
A screenshot with both problems in it.. Acrobat Reader was sitting between two monitors, the right display is the external one

After 10.7.3 i was optimistic apple finally fixed the bug....but it seems that they were not successfull or just didn't care....
I'm seriusly really sour about the rapidly decreasing quality apple delivers.....thinking more and more about switching back to linux again....

HP 2730p external Monitor problems Intel GMA 4500

Hi,
So far I'm really happy with Archlinux on my Laptop (HP 2730p), but I can't get it to work properly with my external monitor
The monitor (HF287) is detected and connected just fine, but that's about it
According to the OSD of the monitor it's running with 1680*1050 Pixel (native resolution 1920*1200), no matter what resolution I choose using xrandr or the Systemsettings GUI, but only shows a 1280*1024 area of the actual screen, stretched into 1680*1050. The rest is out of the screen (adjusting the monitor doesn't change anything)
If I set the the monitor to its native resolution (1920*1200) I only get a image like this:
This is the external monitor with the default LXDE Background Image and a window reaching into the monitor just a bit
The same problem occurs in Ubuntu (tested with a liveCD)
However it works fine using Windows7
Xrandr output
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x 163mm
1280x800 58.5*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 593mm x 371mm
1920x1200 60.0 +
1680x1050 60.0
1400x1050 60.0
1280x1024 75.0* 60.0
1440x900 59.9
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
TV1 unknown connection (normal left inverted right x axis y axis)
848x480 30.0 +
640x480 30.0 +
1024x768 30.0
800x600 30.0
I have no xorg.conf or any file for the monitor on /etc/X11/xorg.conf.d
extra/xf86-video-intel is installed and up to date
However, I've tried following 10-monitor.conf (unsuccessfully):
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
$lspci |grep -i graphics
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
I hope I have provided enough information and someone can help me to fix this problem.
Last edited by grayscale (2011-08-30 08:18:20)

Sorry for reviving this thread from the dead, but I found a workaround and wanted to share it:
As mentioned on https://bugs.launchpad.net/ubuntu/+sour … bug/796030 this is a known(?) bug with Kernel versions newer than 2.6.34.
So after downgrading to this version I was able to use the full resolution of the screen, but with a ~ 200pixel wide stripe missing between the monitors (External left of internal => virtual Screen of 3200*1200) and a equally sized stripe of the most left screen on the most right side. This stripe was only missing for the screen, but not for the mousecursor => If I wanted to press a button I had to press it ~200pixel right of it
(But I was able to use Composite Effects in Compiz)
This was resolved by disabling Composite in xorg.conf
not the full xorg.conf
Section "Extensions"
Option "Composite" "Disable"
EndSection

New power supply did't fix problem with geforce 4400

I continue to get flashing on the monitor and locking up problems with my new MSI geforce 4 ti 4400 card despite installing the latest Nvidia driver and new Compuserve 500W power supply (30A on the +3.3). Everything I've read here said it was probably my old 350W power supply. Not so. What do I try now?
Here's my specs:
P4 2.0
Soyo Ps4 Dragon Ultra
1 gb ddr ram
80gb WD hard drive
Soundblaster Live 5.1
Windows XP
Compuserve 500W ps
Viewsonic VA 800 monitor
I really need help!

I had similar problems when I tried to use an MSI GF4 Ti4600 and Windows XP Professional locks up at the splash screen. I also tried a Leadtek GF4 Ti4600 and got the same results. I had already upgraded my power supply from a Antec TruePower 330 watts to 480 but to no avail.
Turns out the problem was caused by my brand new Gigabyte GA-8IEXP rev. 1.2 motherboard not fully supporting AGP 2.0 voltage requirements required by the power hungry GF4 Ti4600 cards though their tech support would not confirm nor deny this. Even upping the core and AGP voltages via the BIOS didn't help.
I then bought an Intel D845EBG2L motherboard (that stated AGP 2.0 compliance in the manual in addition to AGP 4X support) and the GF4 Ti4600 ran great :P

How can I fix 'Monitor profile defective'?

Hi Guys, I really could use some help.
I have recently installed Photoshop Element 7 and on opening the editor get the dialogue ‘The monitor profile LGW2242 appears to be defective. Please rerun your monitor calibration software’. It also provides the options ‘ignore profile’ or ‘use anyway’.
My Monitor is an LG Flatron W2242S (OK I know it’s not exactly top of the range but it provides a nice big work space). LG support (that’s an oxymoron) (un)helpfully tell me that this is a problem with Photoshop which must be defective and have introduced a virus!
This issue appears to addressed on the Adobe website at http://kb2.adobe.com/cps/328/328054.html However, I note this advice applies to PS and not PSE. Am I right in assuming that Adobe Gamma is not a part of PSE7? I cannot find it anywhere on my computer, nor can I find anywhere on the Adobe site where Adobe Gamma is available as a download. Does the Adobe Color Management Module (CMM) supersede Adobe Gamma and/or do the same thing? http://www.adobe.com/support/downloads/detail.jsp?ftpID=3618
I have been through all the community threads, all the independent stuff on the web and I cannot find a solution to this problem - hence in desperation I am posting here.
Can anyone tell me
1.       Is Elements 7 supposed to ship with or include Adobe Gamma? Adobe website says AG ships with Elements but that may refer to earlier versions.
2.       If Elements 7 does not ship with Adobe Gamma are the two products compatible? If so it MIGHT still solve the problem according to the comments made about this problem with earlier versions.
3.       If they AG and AE7 are compatible WHERE CAN I DOWNLOAD A COPY OF ADOBE GAMMA?
Am I only going to be able to solve this by upgrading to CS and/or buying a higher spec monitor or is this warning something that can just be ignored without affecting outcomes?
Thanks in anticipation
Peter

Adobe Gamma is no longer distributed with Adobe products. It was designed to help you visually calibrate CRT displays, and didn't produce good results with flat-panel displays. Ignore the tech note you found, and don't worry about trying to install Adobe Gamma.
The "profile defective" message is most likely caused by an LG monitor profile that either doesn't conform with industry standards, or it does conform, is incompatible with PSE. When PSE starts, you can safely click "ignore profile".
Color profiles tell software the color characteristics of individual scanners, printers, and displays. So-called "color-managed" programs use those profiles to reproduce color more accurately. Most programs on Windows are not fully color-managed, including most browsers, Windows Picture And Fax Viewer on XP, and Microsoft Office. Adobe PSE and Windows Photo Gallery and Live Photo Gallery are color-managed.
Some display manufacturers ship profiles that attempt to represent the "average" of that model of display.   But your individual display may differ a fair bit from that "average". That's why people who care about faithful color will use at least an inexpensive calibrator such as the Spider or Huey.
Moving forward, since PSE isn't able to use the LG display profile, and you probably aren't using any other color-managed programs, you could disassocate the profile from the display:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Colors_are_wrong
You could also go to the LG web site and see if they have an updated profile.

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. The screen goes gray, sometime out. Have to press power button to get screen on. Problem stops.

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. It will flicker, the screen goes gray, sometime out. Have to press power button to get screen on. Problem stops. Getting more frequent. After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Monitor profile defective

Have researched this and found good answers. But my question here is can you turn that pop-up message "The monitor profile "Samsung - Natural Color Pro 1.0 ICM" appears to be defective. Please rerun your monitor calibration software" on and off.
I may have checked the "don't show this message again" ??
If so...can I re-enable the the profile warning message and how ?
Or...does this pop-up only occur if there is a monitor profile issue when Photoshop starts ?
Adobe Photoshop CS4 (64 Bit)
Thanks...TRinAz

The question is what alternative you picked before you checked "don't show". The options are "use anyway" and "discard" - and in the latter case sRGB is used instead.
The Samsung profile is very likely defective (many canned profiles are), so you're better off using sRGB unless you have a wide gamut monitor.
To correct the problem permanently you buy a calibrator to make a new monitor profile. Then it's moot.
EDIT: There is a Reset All Warning Dialogs in Preferences, to answer your question.

FCP sync problem with AG neovo Monitor

I am working on a Macbook pro (10.6.4 - 3.06 GHz Intel Core 2 Duo) and am currently using an AG neovo monitor as a dual screen. I am using external speakers via the headphone port on the computer and am working on a Prores HQ sequence 25fps 1920x1080 in FCP 7.0.3.
The problem I'm having is that when I try to use the AG monitor as external video playback in FCP, the video on the AG is not in sync with the sound. Playback is also quite sticky. I've tried messing around with the 'Playback control' in 'System settings' but it hasn't helped.
Also the current resolution of my macbook pro is at 1440x900 but the AG is at 1600x1200. The AG doesn't have an option for 1440. The highest setting they have in common is 1344, but when I tried setting both resolutions to 1344 it didn't solve the issue.
Does anyone have any ideas of how to solve this issue?
Please let me know if you need any more information or if I haven't explained clearly enough what the issue is.
Kind regards
Alice

Thanks for responding, have solved the problem by making sure that both monitors are set to the same colour display profile in 'System preferences' - 'displays' - 'colour'. As long as both monitors are set to the same one then the sync is fine. It does mean that one of the monitors (basically the one which is using the other one's colour profile) has a funny colour to it, but I can work with that.
Just to clear up confusion I was connecting to the AG nuevo monitor via a DVI adapter.
Thanks for taking the time to respond though, it was your response which made me look up the colour profiles and solve it.

Intel HD 4400 - Intermittent/Periodic Hang

I am running Arch on a Lenovo X240 with an Intel i7-4600U CPU with Intel HD 4400 graphics.
When pushing 2 screens, the 1920x1080 on the laptop and a TV running 1920x1080 to watch a movie, the entire system will periodically lag. By this I mean, that when running VLC or flash within Chrome/Firefox there will be a slight pause every 1-2seconds, very consistently. I have tried messing with /etc/X11/xorg.conf.d/20-intel.conf to no avail, it is displayed below. I am wondering if there are any other avenues I can try? If you need any information, let me know
$ cat /etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "Intel"
Option "AccelMethod" "SNA"
Option "TearFree" "true"
Option "VSync" "false"
Option "PageFlip" "false"
Option "Throttle" "false"
EndSection
$ sudo lshw -c cpu
*-cpu
description: CPU
product: Core i7 (None)
vendor: Intel Corp.
physical id: 0
bus info: cpu@0
version: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz
serial: None
slot: CPU Socket - U3E1
size: 3GHz
capacity: 3300MHz
width: 64 bits
clock: 100MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt cpufreq
configuration: cores=2 enabledcores=2 threads=
$ sudo lshw -c display
*-display
description: VGA compatible controller
product: Haswell-ULT Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 0b
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:47 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:3000(size=64)

Any suggestions welcome.

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

Try resetting the PRAM and SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

Problem intel HD 4400 monitor 13 inches - defect of the resolution on "windows photo viewer"

Similar Messages

Maybe you are looking for