Problem: Intermittant accesst to remove DVR function from work, plus unrelated(?) hub issue

Hi folks.
We have the DVR with media manager and multiroom and all that. I love it, but two things are going on.
1: I can sometimes, but rarely, get to remove DVR functions from the webpage. When I log in I can see the caberbox status that tells me how many hours of recordingI have left. However, I don't see an icon on the left that lets me record or delete things, nor can i see anything when I click the DVR button from the cablebox status page. Whats going on? Sometimes I can see it, but not often enough.
2: When watching DVR'ed programs in the bedroom, occiasionaly we get a popup message that covers the screen saying something about losing connection to the hub or something like that. IT then stops us from watching the recorded program, and makes us go back again from the begining. Any idea what thats about?

BDMacD wrote:
Hi folks.
We have the DVR with media manager and multiroom and all that. I love it, but two things are going on.
1: I can sometimes, but rarely, get to remove DVR functions from the webpage. When I log in I can see the caberbox status that tells me how many hours of recordingI have left. However, I don't see an icon on the left that lets me record or delete things, nor can i see anything when I click the DVR button from the cablebox status page. Whats going on? Sometimes I can see it, but not often enough.
2: When watching DVR'ed programs in the bedroom, occiasionaly we get a popup message that covers the screen saying something about losing connection to the hub or something like that. IT then stops us from watching the recorded program, and makes us go back again from the begining. Any idea what thats about?
There have been hub errors and other issues with HM DVR and I believe it is fixed with th 1.6.2 software that is being rolled out nationwide. There is a post about 1.6.2 that shows the remaining schedule of where and when. If you go to menu/ settings/ System Information, it will show you what version you have.
Here is a link to that posting.
http://forums.verizon.com/vrzn/board/message?board.id=FiOS_TV&thread.id=8917
Message Edited by prisaz on 03-26-2009 05:10 PM

Similar Messages

New to FIOS TV Multi-room DVR - Should I be able to use DVR functions from the other HD STBs?

We just converted from Directv (three DVRs) to FIOS TV and am hoping I didn't make a huge mistake: The sales agent I spoke to said that the Multi-room DVR (Motorola QIP-7216-1) and non-DVR STB would enable me to get the same features I had with my Directv setup so each user could Stop/Start/Record programming from their own remote. Unless I'm doing something wrong, I can only perform DVR control functions from the real DVR. I can view recorded programming on the non-DVR STBs but pressing record for a live broadcast or trying to select a show to record from the guide doesn't work.
I have the ActiontecGen2 MOCA connected MI424WR router, three HD STBs (Motorola 7000), one standard definition STB and the DVR.

Tomd514 wrote:
We just converted from Directv (three DVRs) to FIOS TV and am hoping I didn't make a huge mistake: The sales agent I spoke to said that the Multi-room DVR (Motorola QIP-7216-1) and non-DVR STB would enable me to get the same features I had with my Directv setup so each user could Stop/Start/Record programming from their own remote. Unless I'm doing something wrong, I can only perform DVR control functions from the real DVR. I can view recorded programming on the non-DVR STBs but pressing record for a live broadcast or trying to select a show to record from the guide doesn't work.
I have the ActiontecGen2 MOCA connected MI424WR router, three HD STBs (Motorola 7000), one standard definition STB and the DVR.
As you've found, you can only create recordings from the DVR. If you want each room to have the ability to schedule recordings, then you need a separate DVR in each room.
The FiOS Motorola DVRs cannot access recordings stored on other DVRs.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Removing Aggregate Functions from the Action Menu

Hi People,
I'd like to remove the following aggregate functions from the action menu on a report, if possible:
1. Minimum
2. Maximum
3. Median
Is this actually possible, or am I stuck with them? I've had a good sniff around, but can't find any way to remove them so far.
Cheers.
James

Ok, first click on your name in the menu bar. Then click on "Users&Groups Prefrences..." You should see a little house icon next to 'Login Options" under the menu where all user accounts are displayed. Click on it. Where it says "Show fast user switching menu as" and next to it a dropdown saying "Full Name" change that to icon. After you have done that, the name should be replaced with an icon. Hope this helped.

Removing Commerce Functionality from Basic Portal Config

Is there any documentation as to how to go about removing the commerce, ad and campaign functionality from the Basic Portal Domain Configuration? Or is there an easy way to create a Portal Domain Configuration which does add this in in the first place?

Yeah, thats easy enough. There are still a bunch of residual tables in the DB and stuff like that though. It seems that there ought to be some sort of documentation as to how to strip that stuff out.

Problem with JCA calling to DB function from Service Bus

Hi there
I have managed to use JCA from the Service Bus on several tables, on some diferent Oracle databases and it worked OK.
Now, I try to use it with a DB function that I have defined. Calling to this function from any DB software returns good values.
But calling this function using JCA (adapter created with jDeveloper) on OSB gives me the correct answer except that instead of the data there are question marks, like +<param>???</param>+
The database encoding is ISO-8859 (by using "SELECT * FROM NLS_DATABASE_PARAMETERS") .
This encoding is the same as was on different databases that worked ok with other adapters, just not calling a DB function, but a custom SQL.
I would appreciate if anyone might know what can solve this ..
Thanks

Where are you checking the content of the XML?
It seems that platform's default encoding is not able to identify those characters and hence dispalying those as "???". Sometimes you get some invalid characters (like null), in the XML file and when platform's default encoding could not identify those characters then they get displayed like "?". Please check the content of the XML to verify it does not contain any invalid XML characters (sometims null). You may try to log the XML in database and in OSB to see it's content.
Regards,
Anuj

Calling a function from sql*plus

I can call my procedure from sql *plus
by doing
sql>call Proc_name(x,y);
How do you call a function?
null

John,
I think moifying the statement
CREATE OR REPLACE PROCEDURE "OGUSER"."OGX1" (user_county in integer, user_permit in integer )
TO
CREATE OR REPLACE FUNCTION "OGUSER"."OGX1" (user_county in integer, user_permit in integer ) return NUMBER is
AND before end you will have to add a return statement
(Probably
return 0;
exception
when others then
return 1;
end;
This will change your procedure to a function but I am not sure you'll be able to see your dbms_output's, if you call the function using select ...
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by john saucer ([email protected]):
I want to turn my procedure into a function.
So I can call it with a select statement.
I'm kind of having problems with the return statement at the top and bottom.
I don't quite understand how to declare the type in the return. My procedure calculates 2 pl/sql tables....
My procedure looks like.
CREATE OR REPLACE PROCEDURE "OGUSER"."OGX1" (user_county in integer, user_permit in integer )
as
i integer :=0;
j integer :=0;
type dept_table_type is table of ogxtest%rowtype
index by binary_integer;
type dept2_table_type is table of ogxtest%rowtype
index by binary_integer;
my_dept_table dept_table_type;
my_dept2_table dept2_table_type;
v_cotemp number := user_county;
v_permittemp number := user_permit;
v_origcotemp number := user_county;
v_origpermittemp number := user_permit;
v_count number(2) :=1;
v_count2 number(2) := 1;
v_oldcount number(2) :=1;
v_oldcount2 number(2) := 1;
begin
select count(*) into v_count from ogxtest where oco=v_cotemp and opermit=v_permittemp;
select count(*) into v_oldcount from ogxtest where nco=v_cotemp and npermit=v_permittemp;
while v_count >= 1 LOOP
i := i+1;
v_count2 := v_count2 +1;
select *
into my_dept_table(i)
from ogxtest where oco=v_cotemp and opermit=v_permittemp;
v_cotemp := my_dept_table(i).nco;
v_permittemp := my_dept_table(i).npermit;
select count(*) into v_count from ogxtest where oco=v_cotemp and opermit=v_permittemp;
end loop;
while v_oldcount >= 1 LOOP
j := j+1;
v_oldcount2 := v_oldcount2 +1;
select *
into my_dept2_table(j)
from ogxtest where nco=v_origcotemp and npermit=v_origpermittemp;
v_origcotemp := my_dept2_table(j).oco;
v_origpermittemp := my_dept2_table(j).opermit;
select count(*) into v_oldcount from ogxtest where nco=v_origcotemp and npermit=v_origpermittemp;
end loop;
for i in 1..v_count2-1
loop
dbms_output.put_line(' reassigned to - orig county ' | |my_dept_table(i).oco | | ' orig permit ' | |my_dept_table(i).opermit| | ' new county ' | |
my_dept_table(i).nco | | ' new permit ' | |my_dept_table(i).npermit );
end loop;
for j in 1..v_oldcount2-1
loop
dbms_output.put_line(' reassigned from - orig county ' | |my_dept2_table(j).oco | | ' orig permit ' | |my_dept2_table(j).opermit| | ' new county ' | |
my_dept2_table(j).nco | | ' new permit ' | |my_dept2_table(j).npermit );
end loop;
end;
<HR></BLOCKQUOTE>
null

How to pass table type variable into function from SQL*PLUS ?

How to pass a table type variable from sql*plus prompt into a function ?
Thanx in advance.

Krishna,
Do you mean like this?SQL> DECLARE
2      TYPE t_tbl IS TABLE OF VARCHAR2(20);
3      l_sample_tbl           t_tbl;
4
5      FUNCTION print_contents ( p_tbl IN t_tbl )
6      RETURN VARCHAR2
7      IS
8          l_string            VARCHAR2(1000);
9      BEGIN
10          FOR i IN 1..p_tbl.COUNT LOOP
11              IF (i = 1) THEN
12                  l_string := p_tbl(i);
13              ELSE
14                  l_string := l_string || ', ' || p_tbl(i);
15              END IF;
16          END LOOP;
17          RETURN (l_string);
18      END print_contents;
19
20 BEGIN
21      l_sample_tbl := t_tbl();
22      l_sample_tbl.EXTEND;
23      l_sample_tbl(1) := 'one';
24      l_sample_tbl.EXTEND;
25      l_sample_tbl(2) := 'two';
26      l_sample_tbl.EXTEND;
27      l_sample_tbl(3) := 'three';
28      l_sample_tbl.EXTEND;
29      l_sample_tbl(4) := 'four';
30      l_sample_tbl.EXTEND;
31      l_sample_tbl(5) := 'five';
32      DBMS_OUTPUT.PUT_LINE(print_contents(l_sample_tbl));
33 END;
34 /
one, two, three, four, five
PL/SQL procedure successfully completed.
SQL> HTH,
T.

Remove a Function from SAP.Functions (opposite of .add)

Hi,
I have a function written in SAP which I call several times with new importparameters (called by VBA/Excel). The output goes to a table.
Although the functions clears the table, the table just keeps growing in the result.
It seems like the data is kept, but I guess with every new call all the previous functions get called as well, so I need to unload the function every time (un-add it ), however I don't know how to do this (I didn't try obvious commands like REMOVE or so, as I guess it might reset also the connection).
Can anyone help me with this ?
Thanks,
Alain
In addition, some snippits:
    Set functionCtrl = CreateObject("SAP.Functions")
    Set sapConnection = functionCtrl.Connection
(than login is done)
The above is called only once, the next part several times with new matererialnumbers....
   Set theFunc = functionCtrl.Add("YRFC_MyFunc")
   theFunc.exports("Mat") = MatNr
   FuncResult = theFunc.Call
    If FuncResult = True Then
        For Each veld In theFunc.tables("TABUIT").Rows
            Cells(teller, 6) = veld("MFRNR")
            Cells(teller, 7) = veld("LIFNAME")
            Cells(teller, 8) = veld("HTNNR")
            Cells(teller, 9) = veld("MFRPN")
            Cells(teller, 10) = veld("MSTAE")
            teller = teller + 1
        Next
        Set theFunc = Nothing
    Else
            Cells(teller, 6) = "???"
    End If

If I clear the table with 'free' i.s.o. 'clear', the problem doens't occur...(I had to change something else when I remembered that clear isn't always the best for Tables)
However, now just for fun, if any knows if a function can be removed, please reply anyway

Problem with macro expansion removing ? characters from macros

Hi,
When compiling the following code (CC ex.cpp), we always receive the error line 28: Error: Unexpected ":" found.
ex.cpp
#include <stdio.h>
#include <stdarg.h>
#include <string.h>
#define ONE 1
#define MCheck(n) (n == ONE ? "One" : "???")
#define F1(buff, size, ...) func(buff, size, __VA_ARGS__)
#define F(...) F1(acBuff, sizeof(acBuff), __VA_ARGS__)
void func(char* buff, size_t len, const char* fmt, ...) {
    va_list args;
    va_start(args, fmt);
    size_t nWrote = vsnprintf(buff, len, fmt, args);
    va_end(args);
int main(void) {
    char acBuff[10];
    // Parsed OK
    F1(acBuff, sizeof(acBuff), "%s\n", MCheck(1));
    printf("%s", acBuff);
    // Causes error
    F("%s\n", MCheck(1));
    printf("%s", acBuff);
    return 0;
}This appears to be because the pre-processed code (found using CC -E ex.cpp) has removed the '?' characters from the parsed macro 'F' expansion as shown:
(Code inserted from headers)
#13 "ex.cpp"
void func ( char * buff , size_t len , const char * fmt , ... ) {
va_list args ;
( void ) ( args = ( __va_list ) & __builtin_va_alist ) ;
size_t nWrote = vsnprintf ( buff , len , fmt , args ) ;
( void ) 0 ;
int main ( void ) {
char acBuff [ 10 ] ;
func ( acBuff , sizeof ( acBuff ) , "%s\n" , ( 1 == 1 ? "One" : "???" ) ) ;
printf ( "%s" , acBuff ) ;
func ( acBuff , sizeof ( acBuff ) , "%s\n" , ( 1 == 1 "One" : "???" ) ) ;
printf ( "%s" , acBuff ) ;
return 0 ;
}Is this an error with the compiler, or is there some flag we need to set to ensure the macros are expanded to the correct level?

Bwadly wrote:
Hi Maxim,
Thanks for the feedback.
We are using Solaris 8, so I'm guessing we should use Sun Studio 11? Correct, the latest release that supports Solaris 8 is Sun Studio 11. Be sure to patch both Solaris and Sun Studio once you install it.
BTW, I was able to reproduce the problem using Studio 9 compiler (CC 5.6). Apparently, it got fixed in later versions of compiler - patched version of CC 5.6 does not have it.
Edited by: MaximKartashev on 15.08.2008 12:55

Problem passing param to a java function from xslt

HI all,
A thousand thankyou's to any who can help me.
Documentation is scarce, and I got to bed late last night. It has been a hard day of fruitless searching for a solution to this.
Problem:
Calling a named template in xsl using the with-param tag to pass in a parameter.
attempting to call a java function, specifying that parameter as an argument.
getting parse error:
ERROR: 'Cannot convert argument/return type in call to method 'java.lang.String.new(java.util.Date)''
sample code:
calling the named template
          <xsl:call-template name="calc-age">
               <xsl:with-param name="dob">
                    <xsl:value-of select="/FullRecord/Patient/dob"/>
               </xsl:with-param>
          </xsl:call-template>the template itself
     <xsl:template name="calc-age">
          <xsl:param name="dob"/>
         <xsl:variable name="date" select="java:util.Date.new()"/>
         <xsl:value-of select="java:toString($date)"/>
          <xsl:variable name="sdob" select="java:lang.String.new($date)"/>
     </xsl:template>          the error
ERROR: 'Cannot convert argument/return type in call to method 'java.lang.String.new(java.util.Date)''
FATAL ERROR: 'Could not compile stylesheet'
javax.xml.transform.TransformerConfigurationException: Could not compile stylesheet
     at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.java:824)
     at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTransformer(TransformerFactoryImpl.java:613)does anyone know what is wrong here?
And if they do, where I can find examples or a reference on how this is supposed to work?
It's driving me mad!
Thanks all!
svaens
Edited by: svaens on Apr 14, 2008 9:16 AM

ok.
What I had pasted was wrong, But I was it was only confused because I had tried quite a few different things to get it working, and had made a mistake somewhere along the way.
HOWEVER!!!
This code, I believe should work, (below) but doesn't.
the error is different, but similar.
The call to the template remains the same, but the template itself is now different.
What is wrong with it?
Do i need to convert a xml document string to a java string somehow?
template:     <xsl:template name="calc-age">
          <xsl:param name="dob"/>
         <xsl:variable name="sdob" select="java:lang.String.new($dob)"/>
         <xsl:value-of select="java:toString($sdob)"/>
     </xsl:template>     the error:
ERROR: 'Cannot convert argument/return type in call to method 'java.lang.String.new(reference)''
FATAL ERROR: 'Could not compile stylesheet'To be more clear, I am translating XML via XSL which is transformed using Java 6, and the packages:
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;

New Tab script error prevents other functions from working. How do I remove "New Tab" content (sponsored links, etc)?

I actually found the settings for it in the top right corner of the page, but figured I'd report it anyway.
Basically, the New Tab Tiles have been causing script errors (prompt to stop script) that disable a few navigation controls, like being able to close a tab. Any tab that is open or opened after the script error will not close. I have to restart Firefox for the controls to start working again. I have found that the tiles that have been causing the problems are the one's that Firefox provides, as it still happens when my internet history is clear and not loading any tiles from my history.
It doesn't happen every time, but it does happen regularly. I just changed my settings from "enhanced" to "classic" and will see if this helps, otherwise I will just turn it to blank if its still an issue.

If it does happen there are other add ons that block scripts like No Script.
However for script errors, general troubleshooting can be found: [[Warning Unresponsive script - What it means and how to fix it]]

Replication of Partner Function from CRM 5 to ECC6 Issue

Hi experts
Is someone able to assist with pointing me in the correct direction to resolve a partner function replication issue please. We create all entities/BPs in CRM, and replicate them to ECC.
We have a custom partner function, ZF, that is held against Payer and Sold-to in ECC. This is a separate entity in CRM, but is sent according to relationship assignment to ECC. We have noticed that this partner function is not being updated correctly.
Scenarios:
Ending a relationship between Account/Customer (Payer/sold-to in ECC) and the Farm (ZF partner function) - the ZF partner function is removed in ECC. This is correct behaviour.
New Account or Customer creation in ECC with ZF relationship assigned, ZF partner function is being created in ECC. This is correct behaviour.
HOWEVER, when adding a new ZF relationship in CRM to an existing Payer/Sold-to, the ZF partner function does not get created in ECC. This is incorrect behaviour - new valid relationship should trigger ZF partner function in ECC.
Also, name changes to the ZF maintained in CRM, is not being updated in ECC for existing relationships. Instead, the Partner Function tab, ZF type, displays the old name for the Farm.
BUPAREL bdocs are being created and sent to ECC, however something is happening on the receiver end. How do we trace this, and does anyone have any ideas on where to start to find out what is happening here?
Many thanks
Cara

Solved, internal issue usage tab not being completed correctly so not assigning partner function

BlackBerry problem is stopping my BT Yahoo mail from working

Since the problems started with BB yesterday I have not been able to receive email using my BT Yahoo mail account. When I try I get this error message -
Server is busy. Another POP session may be active. Please try again later.
I am very frustrated that I can't access my emails and would like to know when this problem will be sorted out. I am assuming that BB is the other active session and that it is causing the problem.

Port 110

Remove grid lines from work sheet

How can I format a work sheet in Numbers so that the grid lines do not show?

Select the table in the left side sheet & table list.
Inspector Graphics > Line > None.
A faint line will show up when the table is selected but not when it isn't or when it is printed.
Best.

Did Apple remove the search function from this forum?

I'm trying to find out if a topic has already been posted here, but I can't seem to find the Search Discussions function, which I'm certain used to be on the right of the screen.
Did Apple remove this functionality from the Discussions forum?

It's been temporarily disabled while they address some issues we're having with the forums lately.
Cheers!
-Bryan

Problem: Intermittant accesst to remove DVR function from work, plus unrelated(?) hub issue

Similar Messages

Maybe you are looking for