Problem is detected with Array : 01
I was backing up my server when it suddenly turned off. When it restarted it showed a critical error message saying "Problem is detected with Array : 01".
Windows tried starting and kept rebooting so I just turned it off.
When I launch the RAID utility I clearly see that the drive 02:01 seems ok but the other one is marked as "failed orisconnected" (it is connected ans spinning).
This is the spec: On the server I have windows 2012R2 installed on two HD 1TB on RAID1.
I habe an unused NAS, so I decided to create an iSCSI drive as a Target, and run the windows backup utility to do a Full Backup on it.hat may I have done wrong and how could I resolve this issue?
This clearly is related to the windows backup utility since this server was working fine until then.
Thanks.
Hi,
The issue could be due to that one of the two drive is failed in the RAID 1. You need to replace the failed drive and rebuild the array automatically.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
"A problem was detected with your serial number"
HELP! Everytime I open Dreamweaver 8, Fireworks, or any other
software package I get the message "A problem was detected with
your serial number." It then gives me the option to retype my
serial number. After I type in the serial number I get the little
checkmark like everything is great. But when I press "Continue" it
comes back with that same message.
I called Adobe support and they said it sounded like my
registration key got corrupted and that I would have to follow
TechNote 4e7826b7 which steps you through removing Studio from the
computer and deleting orphaned files. I've done this TWICE and when
I tried to call Adobe technical support, they sent me to customer
support (with a long hold time in between) and then they sent me to
technical support. When I mentioned I had already passed this
route, the Adobe employee said she would inform the supervisor and
they would get back to me. Guess what. Never happened.
Surfice it to say I'm still getting the message and I don't
want to uninstall a third time because I know the outcome. Does
anyone have any suggestion? Pleeeeeeeease!
Thanks,
Glenn LauderdaleSame problem here. I just hit 'cancel' and the program opens
fine.
Adobe posted a hot fix that allegedly fixes the problem. I've
run the thing several times, and the annoying box still shows up.
You can find it here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?event=view&id=KC.tn_18976&extid=tn_18 976&dialogID=53494061&iterationID=1&sessionID=4830e245130c574b2b37&stateID=1+0+53482525&mo de=simple
I'll keep checking to see if any fix comes up.
John -
A problem was detected with Server.
Hi everyone,
I can't remember how I solved this problem I had last year with Mavericks. Now I can't install the apple osx server 4.0 for Yosemite. I have the problem again.
Can someone tell me how to solve this problem please?.
Thank You!!.Thanks Linc for your quick help,
However I have remove that file: /Library/PrivilegedHelperTools/com.apple.serverd" and the Sever.app but I'm still getting the same error again. Can you tell me what to do please.
Thanks for your help. -
Recently while browsing with TenFourFox 31.6.0 or reading an email in Thunderbird 3.1.20 with my PPC MacG4 with OSX 10.4.11,the above message pops in " ... a problem has been detected with the font -, in the font file $C quit all applications and remove this font file or replace it with a new version". I don't know where to start, not ever having seen this message. :-)) Any suggestions much appreciated. Thanks.
-- RaymonHi Raymon, it sounds like file corruption, I doubt there is a real font file called that.
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If still no change after a regular boot, then open Font Book in Applications & see if you can find it there, or have Font Book Validate all fonts. -
Problems with Array-Parameters when using Document-Binding
Hi,
I use the following environment:
JDeveloper 11.1.1.3.0
WLS 10.3.3.0
I created a small EJB (2.1), containing a simple method, which is using arrays as parameters:
public String doTestArray(String[] aStringArray, int[] aIntArray)
throws RemoteException;
I exposed this EJB as a Webservice using JDev's Webservice wizard. I choosed Document/Wrapped-Binding. WSDL and mapping file are being generated. Made an EAR-Deployment-Profile and deployed the application to Integrated-WLS.
I tried to test the Webservice with the WLS integrated test client, which is generating the following request:
<doTestArrayElement xmlns="http://model/types/">
<!--Zero or more repetitions:-->
<arrayOfString_1>string</arrayOfString_1>
<!--Zero or more repetitions:-->
<arrayOfint_2>3</arrayOfint_2>
</doTestArrayElement>
Unfortunately, the invokation fails. WLS returns
weblogic.wsee.codec.CodecException: Failed to decode message
at weblogic.wsee.codec.soap11.SoapCodec.decode(SoapCodec.java:188)
at weblogic.wsee.ws.dispatch.server.CodecHandler.decode(CodecHandler.java:139)
That only happens in methods, which use array-parameters. Simple parameters are no problem.
However, when I use RPC/Encoded as Webservice-Binding, everything seems to be fine.
Does WLS have problems in general using array-parameters and Document-Binding?
Any help would be appreciated.
Thanks,
StefanHi Josko,
Where do you have this problem 3.5 or 7.0 BexAnalyzer.
When ever heirarchy icons are created in BEx, respective hyperlink is assigned to each of them, Make sure that you dont manipulate with them,,
If you still have problem then create OSS message.
Regards,
Vinay -
My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged -
Hello.
During developing Domain Index for Oracle 11.2.0.1.0 (problem also appears in 12с) i was faced with misunderstanding of parameter types of function
ODCIIndexInsert in case of creating indextype WITH ARRAY DML option
According to Oracle documentation
http://docs.oracle.com/cd/E11882_01/appdev.112/e10765/ext_idx_ref.htm#i76892
In case of WITH ARRAY DML option Oracle will invoke ODCIIndexInsert with following signature
FUNCTION ODCIIndexInsert(
ia ODCIIndexInfo,
ridlist ODCIRidList,
newvallist varray_of_column_type,
env ODCIEnv)
RETURN NUMBER
In my case indexed column has datatype NUMBER so i defined varray_of_column_type as SYS.ODCINumberList
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER
Indextype was created as
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
or
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
(problem occurs in all cases)
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
When attempting to insert data in the table
insert into test_table values (1);
oracle raise exception
Error starting at line 53 in command:
insert into test_table values (1)
Error at Command Line:53 Column:1
Error report:
SQL Error: ORA-29925: cannot execute SCOTT.INDEX_METHODS.ODCIINDEXINSERT
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
29925. 00000 - "cannot execute %s"
*Cause: The specified function does not exist or does not have an
appropriate signature.
*Action: Implement the function with the appropriate signature.
So my question is.
Is it normal behavior of oracle (according to documentation)?
What is correct signature of ODCIIndexInsert function in case of INDEXTYPE creation with 'WITH ARRAY DML' option and fact that indexed column has NUMBER datatype?
By the way if i define indextype without 'WITH ARRAY DML' option signature is clear, and working. But this approach doesn't satisfies our performance needs.
Also if i define index type with option 'WITH ARRAY DML WITHOUT COLUMN DATA' and use signature
static function ODCIIndexInsert(ia sys.odciindexinfo, ridlist sys.odciridlist, env sys.ODCIEnv) return number
Everything works too. But this approach doesn't satisfies our business needs.
Is it a way to define ODCIIndexInsert parameter types (in case of indexing number column) so that batch inserting works according to documentation ?
FUNCTION ODCIIndexInsert(
ia ODCIIndexInfo,
ridlist ODCIRidList,
newvallist varray_of_column_type,
env ODCIEnv)
I am attaching full sql script to recreate environment and reproduce the problem.
Type definition:
CREATE OR REPLACE TYPE index_methods AS OBJECT
step number,
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
CREATE OR REPLACE TYPE BODY index_methods IS
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
BEGIN
ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
RETURN ODCIConst.Success;
END ODCIGetInterfaces;
STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexCreate;
STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexDrop;
STATIC FUNCTION ODCIIndexAlter (
ia sys.ODCIIndexInfo,
parms IN OUT VARCHAR2,
altopt NUMBER,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexAlter;
STATIC FUNCTION ODCIIndexUpdPartMetadata(
ia sys.ODCIIndexInfo,
palist sys.ODCIPartInfoList,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexUpdPartMetadata;
STATIC FUNCTION ODCIIndexExchangePartition(
ia sys.ODCIIndexInfo,
ia1 sys.ODCIIndexInfo,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexExchangePartition;
STATIC FUNCTION ODCIIndexInsert(
ia sys.ODCIIndexInfo,
ridlist sys.ODCIRidList,
newvallist sys.ODCINumberList,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexDelete(
ia SYS.ODCIIndexInfo,
rid VARCHAR2,
oldval number,
env SYS.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexUpdate(
ia SYS.ODCIIndexInfo,
rid VARCHAR2,
oldval number,
newval number,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexStart(
sctx IN OUT index_methods,
ia SYS.ODCIIndexInfo,
op SYS.ODCIPredInfo,
qi sys.ODCIQueryInfo,
strt number,
stop number,
cmpval number,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
sctx := index_methods(1);
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexFetch(
self IN OUT index_methods,
nrows NUMBER,
rids OUT SYS.ODCIridlist,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
end;
Problem workaround:
--drop function test_eq_fun;
CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
BEGIN
IF a = b then
RETURN 1;
ELSE
RETURN 0;
END IF;
END;
--drop operator test_eq;
CREATE OPERATOR test_eq
BINDING (number, number) RETURN NUMBER
USING test_eq_fun;
--drop indextype test_index_type;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
--drop table test_table;
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
insert into test_table values (1);I get single for 1 row and batch for 2 or more rows in the following simplified simulation.
SCOTT@orcl12c> DESC SYS.ODCINUMBERLIST
SYS.ODCINUMBERLIST VARRAY(32767) OF NUMBER
SCOTT@orcl12c> CREATE OR REPLACE TYPE index_methods AS OBJECT
2 (
3 step number,
4 STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
5 STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
6 STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
7 STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
8 STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
9 STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
10 STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, rid in VARCHAR2, newval in NUMBER, env in SYS.ODCIEnv) RETURN NUMBER,
11 STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in your_type, env in SYS.ODCIEnv) RETURN NUMBER,
12 STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
13 STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
14 STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
15 op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
16 MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
17 MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
18 );
19 /
Type created.
SCOTT@orcl12c> CREATE OR REPLACE TYPE BODY index_methods IS
2 STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
3 BEGIN
4 ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
5 RETURN ODCIConst.Success;
6 END ODCIGetInterfaces;
7
8 STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
9 BEGIN
10 RETURN ODCIConst.Success;
11 END ODCIIndexCreate;
12
13 STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
14 BEGIN
15 RETURN ODCIConst.Success;
16 END ODCIIndexDrop;
17
18 STATIC FUNCTION ODCIIndexAlter (
19 ia sys.ODCIIndexInfo,
20 parms IN OUT VARCHAR2,
21 altopt NUMBER,
22 env sys.ODCIEnv)
23 RETURN NUMBER IS
24 BEGIN
25 RETURN ODCIConst.Success;
26 END ODCIIndexAlter;
27
28 STATIC FUNCTION ODCIIndexUpdPartMetadata(
29 ia sys.ODCIIndexInfo,
30 palist sys.ODCIPartInfoList,
31 env sys.ODCIEnv)
32 RETURN NUMBER IS
33 BEGIN
34 RETURN ODCIConst.Success;
35 END ODCIIndexUpdPartMetadata;
36
37 STATIC FUNCTION ODCIIndexExchangePartition(
38 ia sys.ODCIIndexInfo,
39 ia1 sys.ODCIIndexInfo,
40 env sys.ODCIEnv)
41 RETURN NUMBER IS
42 BEGIN
43 RETURN ODCIConst.Success;
44 END ODCIIndexExchangePartition;
45
46 STATIC FUNCTION ODCIIndexInsert(
47 ia sys.ODCIIndexInfo,
48 rid VARCHAR2,
49 newval NUMBER,
50 env sys.ODCIEnv)
51 RETURN NUMBER IS
52 BEGIN
53 dbms_output.put_line ('single');
54 return ODCIConst.Success;
55 END;
56
57 STATIC FUNCTION ODCIIndexInsert(
58 ia sys.ODCIIndexInfo,
59 ridlist sys.ODCIRidList,
60 newvallist your_type,
61 env sys.ODCIEnv)
62 RETURN NUMBER IS
63 BEGIN
64 dbms_output.put_line ('batch');
65 return ODCIConst.Success;
66 END;
67
68 STATIC FUNCTION ODCIIndexDelete(
69 ia SYS.ODCIIndexInfo,
70 rid VARCHAR2,
71 oldval number,
72 env SYS.ODCIEnv)
73 RETURN NUMBER IS
74 BEGIN
75 return ODCIConst.Success;
76 END;
77
78 STATIC FUNCTION ODCIIndexUpdate(
79 ia SYS.ODCIIndexInfo,
80 rid VARCHAR2,
81 oldval number,
82 newval number,
83 env SYS.ODCIEnv)
84 RETURN NUMBER AS
85 BEGIN
86 return ODCIConst.Success;
87 END;
88
89 STATIC FUNCTION ODCIIndexStart(
90 sctx IN OUT index_methods,
91 ia SYS.ODCIIndexInfo,
92 op SYS.ODCIPredInfo,
93 qi sys.ODCIQueryInfo,
94 strt number,
95 stop number,
96 cmpval number,
97 env SYS.ODCIEnv)
98 RETURN NUMBER AS
99 BEGIN
100 sctx := index_methods(1);
101 return ODCIConst.Success;
102 END;
103
104 MEMBER FUNCTION ODCIIndexFetch(
105 self IN OUT index_methods,
106 nrows NUMBER,
107 rids OUT SYS.ODCIridlist,
108 env SYS.ODCIEnv)
109 RETURN NUMBER AS
110 BEGIN
111 return ODCIConst.Success;
112 END;
113
114 MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
115 BEGIN
116 return ODCIConst.Success;
117 END;
118 end;
119 /
Type body created.
SCOTT@orcl12c> CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
2 BEGIN
3 IF a = b then
4 RETURN 1;
5 ELSE
6 RETURN 0;
7 END IF;
8 END;
9 /
Function created.
SCOTT@orcl12c> CREATE OPERATOR test_eq
2 BINDING (number, number) RETURN NUMBER
3 USING test_eq_fun
4 /
Operator created.
SCOTT@orcl12c> CREATE INDEXTYPE test_index_type
2 FOR
3 test_eq(number, number)
4 USING index_methods
5 WITH ARRAY DML(number, your_type)
6 WITH LOCAL RANGE PARTITION
7 WITH SYSTEM MANAGED STORAGE TABLES
8 /
Indextype created.
SCOTT@orcl12c> CREATE TABLE test_table (id NUMBER (19,0))
2 /
Table created.
SCOTT@orcl12c> CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type
2 /
Index created.
SCOTT@orcl12c> insert into test_table values (1)
2 /
single
1 row created.
SCOTT@orcl12c> insert into test_table
2 select 2 from dual union all
3 select 3 from dual
4 /
batch
2 rows created.
SCOTT@orcl12c> insert into test_table select deptno from dept
2 /
batch
4 rows created.
SCOTT@orcl12c> insert into test_table select object_id from user_objects
2 /
batch
34 rows created.
SCOTT@orcl12c> -
[iPhone] warning: UUID mismatch detected with the loaded library - on disk
I get this warning at the console when I build and run my app in my device.
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS2.1.sdk/usr/lib/l iblockdown.dylib
=uuid-mismatch-with-loaded-file,file="/Developer/Platforms/iPhoneOS.platform/Dev eloper/SDKs/iPhoneOS2.1.sdk/usr/lib/liblockdown.dylib"
Anyone has this issue and managed to resolve the warning ?Same problem here. I ran into this problem after I installed 3.2.5 with the new 4.2BetaSDK. I had 4.1 on my phone when the problem arose but I then installed the 4.2 beta and now the beta 2 and I still cannot debug on my phone.
-
Warning: UUID mismatch detected with the loaded library
Hi,
Can anyone help me how to solve UUID Mismatch warnings. when i debug my application on iphone then i get the following errors and because of these errors my application hangs. wheen i disconnect my iphone and again run the application on iphone without connecting to xcode then it works fine. But i need to debug the app, so can anyone help me on this issue.
Below is the list of warnings i am gettings:
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CrashReporterSupport.framework/CrashReporterSupport
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/Foundation.framework/Foundation
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/UIKit.framework/UIKit
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CoreGraphics.framework/CoreGraphics
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/AddressBookUI.framework/AddressBookUI
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/AddressBook.framework/AddressBook
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibsqlite3.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CFNetwork.framework/CFNetwork
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/AudioToolbox.framework/AudioToolbox
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CoreAudio.framework/CoreAudio
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/SystemConfiguration.framework/SystemConfiguration
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibgcc_s.1.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibSystem.B.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibobjc.A.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CoreFoundation.framework/CoreFoundation
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibicucore.A.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibxml2.2.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibz.1.2.3.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/Security.framework/Security
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibstdc++.6.0.9.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/IOKit.framework/Versions/A/IOKit
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/s ystem/libkxld.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/IOSurface.framework/IOSurface
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l iblockdown.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/GraphicsServices.framework/GraphicsServices
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/JavaScriptCore.framework/JavaScriptCore
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/WebCore.framework/WebCore
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/WebKit.framework/WebKit
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/ImageIO.framework/ImageIO
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/QuartzCore.framework/QuartzCore
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/SpringBoardServices.framework/SpringBoardServices
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/AppSupport.framework/AppSupport
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreText.framework/CoreText
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/MobileCoreServices.framework/MobileCoreServices
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/IOMobileFramebuffer.framework/IOMobileFramebuffer
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreTelephony.framework/CoreTelephony
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Accelerate.framework/Accelerate
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibbsm.0.dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Accelerate.framework/Frameworks/vecLib.framework/vecLib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Accelerate.framework/Frameworks/vecLib.framework/libvDSP .dylib
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreSurface.framework/CoreSurface
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreVideo.framework/CoreVideo
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/OpenGLES.framework/OpenGLES
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/MBX2D.framework/MBX2D
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Celestial.framework/Celestial
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/ITSync.framework/ITSync
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/DataAccessExpress.framework/DataAccessExpress
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/AccountSettings.framework/AccountSettings
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/MediaToolbox.framework/MediaToolbox
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/MobileBluetooth.framework/MobileBluetooth
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreMedia.framework/CoreMedia
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/VideoToolbox.framework/VideoToolbox
Thanks in advancce
NanditaSame problem here. I ran into this problem after I installed 3.2.5 with the new 4.2BetaSDK. I had 4.1 on my phone when the problem arose but I then installed the 4.2 beta and now the beta 2 and I still cannot debug on my phone.
-
Problem to detect Wifi networks. I restored without back up and it doesn't work. suggestions?
I detected one time networks with the trick (air plane mode on, power off, sim card out, power on, sim card in, air plane mode off...). since nothing. I think it's a software problem. suggestions ?
-
How to do like this with array?
How to do like this with array?
I have 2 constants array put in main while loop ( array1{6,6}; array2{4,4} ). Those arrays will be come the input data for st in the small while loop inside.
The input data look like : [6,6],[4,4],[6,6],[4,4]...... I have to put input data to result array[8]. The method is:
input data result data
[6,6] --------------------------------------------> [6,6,0,0,0,0,0,0]
[4,4] --------------------------------------------> [6,6,4,4,0,0,0,0] ( this period, just add each element in new array)
[6,6] --------------------------------------------> [6,6,4,4,6,6,0,0]
[4,4] --------------------------------------------> [6,6,4,4,6,6,4,4]
[6,6,4,4,6,6,4,4] ( 1st period )
When the las index of result data array is filled in, I have to collapse the result data array to be this array:
----------> collapse: [6,4,6,4,0,0,0,0] ( take the average of 2 continuous element add to new result data array)
Next input data
[6,6] --------------------------------------------> [6,4,6,4,6,0,0,0]
[4,4] --------------------------------------------> [6,4,6,4,6,4,0,0] ( this period, add the average of 2 continuous elements in new array )
[6,6] --------------------------------------------> [6,4,6,4,6,4,6,0]
[4,4] --------------------------------------------> [6,4,6,4,6,4,6,4]
[6,4,6,4,6,4,6,4] ( 2 nd period)
----------> 2nd collapse [5,5,5,5,0,0,0,0] ( take the average of 2 continous element add to new result data array)
Next input data
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,0,0,0]
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,5,0,0]
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,5,5,0]
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,5,5,5]
[5,5,5,5,5,5,5,5] ( third period )
----------> 3rd collapse [5,5,5,5,0,0,0,0]
This wayl to make the tren graph.I made an VI to do that , but it's not yet correct.
Attachments:
tryyyyyyy.vi 39 KB
trend_mode.JPG 49 KBFrankly, I don't understand your problem description or your VI.
In the description, the output array has a fixed size of 8 elements, is this correct? In this case you should initialize an array of 8 elements and do all operations "in place". I don't udnerstand the purpose of all the other code.
There are a lof of things that don't make any sense at all.
The second largest loop has no purpose, because it iterates only once per call
Sometimes you are concatenating an empty array to an existing array. This makes no difference.
Why is some of your data EXT representation???
What's up with complicated constructs such as that small loop shown in the picture. I show a somewhat simpler alternative.
Anyway, I have a hard time understanding your description. What should happen at the end? Do you have a link to a website that describes the algorithm? Does the algorithm have a name?
Message Edited by altenbach on 01-10-2008 09:55 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Simplify.png 5 KB -
Particle detection with grid background
I am attempting to detect cells in an image from a microscope, but the problem is that a grid background exists which prevents the typical thresholding method to work. I have tried using a low pass filter to remove the grid pattern, but in order to filter out the grid completely, the cells become too blurred. An example image is attached. Is there any function to filter away the grid while keeping the cells in focus?
There are also light patterns on the image, but a color plane extraction already removes their intrusion on thresholding.
The ideas mentioned in the thread below may help to detect the cells after the grid has been removed.
http://forums.ni.com/t5/LabVIEW/particle-detection-with-poor-background/td-p/679618
Thanks a lot!
Attachments:
untitled 2.png 1455 KBHello Tiraken,
One potential solution is to take an image of the grid without any cell then subtract all images with the template.
Andy Chang
National Instruments
LabVIEW Control Design and Simulation -
Im a couple days new in java, Ive been searching for an answer for hours and havent found a solution.
This is the mistake it shows (when trying to use any element of the array):
array required, but java.util.ArrayList <java.lang.String> found
The array is:
public static ArrayList<String> numList = new ArrayList<String>();
Im filling it this way: (so that it contains each word of a file in separate)
BufferedReader br = new BufferedReader(new FileReader("Archivo.txt"));
try
while(true)
String aLine = br.readLine();
if(aLine == null) throw new EOFException("Le?do todo el archivo.");
if(!aLine.equals(""))
StringTokenizer st = new StringTokenizer(aLine);
while(st.hasMoreTokens())
numList.add(st.nextToken());
}catch(EOFException e)
The problem comes when I try to use the elements of the array (in specific when trying to convert each element of the array to int, so that i can do math operations with them).
for example:
for (a=0; w>a; a++)
int x = Integer.parseInt(numList[a])
Can anyone help me with this? (where is the mistake and how to convert from string array elements to int)
Thank you // Muchas GraciasThe trouble is that you're confusing ArrayLists with arrays. They're not the same thing.
Currently you're making an ArrayList. If you want an array of String, do this:
String[] myArray = new String[50];
int i = 0;
while(st.hasMoreTokens()) {
myArray[i] = st.nextToken();
i++;
}Or perhaps better yet:
String[] numListArray = numList.toArray(new String[0]);But you really don't need an array for what you're doing. Use an Iterator.
Iterator<String> strings = numList.iterator();
while(strings.hasNext()) {
int x = Integer.parseInt(strings.next());
}You get the idea. Read the Collections tutorial about iterators. Read the language spec about arrays. Also look at the java.util.Arrays class. -
problems were detected by lightroom on this photo. It will not be possible to make ad.......
It means exactly what it says. There is something wrong with the photo file, most likely it got corrupted somewhere and now Lightroom can't use it.
Use a backup of the photo, or the original if it is still on the camera card, and see if one of those will work. -
I have received the following error message from my Adobe Acrobat Pro X1 after installing the CS6 package :, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.
I am now unable to open any pdf?
Any words of advise here how to fix this problem?
Thanks!** Moved to Acrobat Forums for quicker and accurate resolution steps ***
Maybe you are looking for
-
IPhone (AT&T) not receiving texts from Blackberry (Verizon)
Hey Guys, The problem is pretty much stated above. I'm on an Iphone 4s (this was happing on the 3gs as well, so I don't believe that it is an Iphone problem) - i just didn't realize it until now that it was a problem. - her phone (the blackberry. don
-
HT202663 Airport WiFi issues with united_club
Hello, I'm trying to figure out why I can't connect to "united_club" wifi properly. I get an IP address via DHCP, however, I can't ping the gateway nor the public DNS. If I switch over to my Verizon MiFi, I can successfully connect the the internet.
-
especially annoying on forums, since if you are active there, you need the retype user ID and password everytime.
-
Problem in IBAN when craeting Vendor master
Hi, When I create Vendor master( FK01) we gave bank acct number in the payment transaction screen. Later the when we click on IBAN and confirm the IBAN gets saved. We realized later that the IBAN needs to be deleted. Please let us know the procedure
-
Unable to update to ios 4.3.3
when i connect my iphone 3GS and or ipad i get the message there is an update available to 4.3.3 When I try to update my iphone or ipad I get the error message "this device is not eligible for the requested built" what is this about and why can't i u