Problem jpeg export

Hi there I have a problem I hope someone can help me with.
Im running INDesign Server and producing jpegs and pdfs through the soap interface.
With some images when they are imported into the IDD template and exported out again as JPEGs they seem to lose the middle of the image. It like somebody has cut half the image out with a pair of scissors.When exported as PDF there is no problem. I was wondering if anybody has experienced this problem and can offer tips.
I don't understand why some JPGs have the problem but others dont.

Hiya- I am having this problem as well, when .idd is exported as .pdf some (not all) of the images are missing pieces, exactly like they were cut with a scissors. I see you didn't get a reply so i don't hold out too much hope of receiving help. I was hoping if you have figured it out then you could pass on the info here to me- thanks so much

Similar Messages

JPEG Export Problem

A few days ago, someone was commenting on funny square boxes in JPEG exports that occurred at places with spot touch up was performed. I have now experienced the same problem with a single touch up.
D70 RAW file-->single spot touch up-->export to a hi-resolution (best possible) JPEG--> ugly spot at site of touch up.
image available at www.printroom.com/pro/e2photo in gallery "aperture"
The previous thread was locked, but I never saw an answer to the problem
G5 iMac OS 10.4.3
any help would be greatly appreciated
steven

hi. apologies for delay in responding - have been trying to find some time to do some testing
i removed and re-installed the mogrify plugin and this seemed to do the trick. i couldn't replicate with the standard export, so i assume it was just a mogrify issue

JPEG export preferences problems

Hi.
I have indesig cs5.5 and tryed set export resolution and jpeg color space. But in my computer i can't because this properties don't existe.
In other computer this script read ok.
below the JPEG export preferences properties.
The script
tell application "Adobe InDesign CS5.5"
          tell JPEG export preferences
                    set JPEG export range to export range
                    set Exporting Spread to false
                    set Page String to "2"
                    set export resolution to 72
                    set jpeg color space to RGB
                    set JPEG Quality to low
          end tell
end tell
The properties
{«class jpEr»:72, JPEG Quality:low, Page String:"2", JPEG export range:export range, JPEG Rendering style:baseline encoding, Exporting Spread:false, parent:application "Adobe InDesign CS5.5", object reference:JPEG export preferences of application "Adobe InDesign CS5.5"}
Thanks

What was resolution in CS4 became exportResolution in CS5 (and CS5.5). Is it possible you mapped "Adobe InDesign CS5.5" to a CS4 installation on the machine it doesn't work on?
Also: I'm not an Applescript expert (or even really competent in it), so I'm probably going to embarrass myself, but... Have you tried copying and pasting the script's contents into a new file on the machine where it doesn't work rather than running the (compiled, or whatever) .scpt file?
Jeff

Problems with exporting .jpg file in Indesign CS3

Hello! I've used Indesign to create a memory book I would like to now place in another program to have printed (blurb is the company I'm using). Now that I have created the spreads I need to export each page individually as .jpg files, so that I can place them in to this other program to have them printed. (The program does not read .pdf files...they have to be .jpg). I exported each page and noticed that about 20 out of 90 have pages that have black bars over some of the pictures. I'm not sure how to remedy this problem and have tried changing some settings but unsuccessfully so. I've also had problems with Indesign crashing when I've tried to export the entire book as a .pdf. Thanks for the help!

I think I've seen that reported before, but don't remember if an answer was found.
HOWEVER, InDesign's jpeg export leave a lot to be desired under any circumstances, and the best method is to export a good PDF (Use one of the presets intended for printed output) then open that in Photoshop using appropriate settings (if you have body copy sized type, I'd recommend using 600 ppi to keep it realtively crisp, but the printer will probably complain about the size of the file) then save as a high quality jpeg in whichever color profile is recommended by the printer.
I know you said you had some trouble exporting the whole book as PDF, but maybe we can solve that if you give some more details.
Peter

Jpeg-export - metafile error - errorcode 2 or errorcode 0

Hello,
i want to export my Report-Sheet as an jpeg from an serial analysis for every step. After the first step the jpeg-export fails with following error message: (in german) "Es befindet sich keinMetafile in der Zwischenablage. Fehlercode 2" or in english: "there are no metafile at the clipboard. error code 2" the failing command looks like this:
for i = 1 to 12
Call PICEXPORT("D:\MFriedrich\" & messname & "Kraftanzeige_" & k & "0kmh.JPG","JPEG",1,1024,,"RGB 24 YUV 444",100,"JPEG",0)
next
The files and folders do exist.
What can i do? I seems, that a temporary picture will not be create at the clipboard.
DIAdem 9.10.2345 ServicePack 2b
WinXP
Modul: Diadem-Script

Hello!
I tried by my computer and could export in a for loop the Report in a JPEG without any error.
Could you post the whole code you are doing in the loop?
So I can try do reproduce the problem
Regards
Ken

JPEG Export fails in some way

Hello guys,
we have developed a JPEG Export Plugin for InDesign server that worked fine for several years now, never having any problems. Now a strange issue occur and I need some help. When exporting an preview image of one page (containing textframes with text and tables) the preview image is correct if the dpi is smaller than 72 dpi (100% in our application). But when the dpi is equal or greater than 72 the text appears correctly on the image but the tables are missing. This problem occurs on CS4 but not on CS5 server, but there is no difference between the plugin implementation (beside the changes that were obligatory for porting the plugin to CS5). Maybe this is a known issue or someone has solution for it?
Here is the difference between the exported images (smaller than 72 dpi and greater or equal 72 dpi):

I do move some photos to OnOne or PS (for editing), then back to Aperture. In Aperture I would select-all (click) the photos I wanted to send to Sam's for printing then drag the selected items (all at the same time) onto the Sam's web site for processing/priniting. Another thought - on occassion I would have to switch-out flash-cards during shooting.
Ah there you go both pieces of the puzzle solved.
You're getting the Tiff files in Aperture from the use of the external editor. In the Aperture->Preferences->Export window is the settings for what file type to use with an external editor I'm sure your setting is Tiff.
And then by dragging the file out of Aperture rather then exporting it you are getting the Tiff.
IMPORTANT Point:
By dragging the files out of Aperture you are not really exporting them you are getting the Aperture generated preview (or in the case of the Tiff files the original). The settings in the Export window have NO effect on the image when you drag it out. In all likelihood you are not getting the size and/or resolution you think you are.
You should be exporting the versions by using the Export Versions button in the Export window. Once the versions are exported to a folder on your disk you can then drag those to the print web site. This will ensure you are getting the image size and resolution you want.
regards

Illustrator applescript jpeg export options

Mac, Illustrator CS4, Applescript
I need of a jpeg droplet that converts Illustrator files to jpegs. I was able to create one using the Image - Duplicate as JPEG.scpt script that comes with OSX by just adding .AI to the list of files to convert.
The problem is that Image Events was creating jpegs of my Illustrator CS4 files at 150ppi when i need smaller jpegs.
I changed the code to use Illustrator to open and export the jpeg instead of Image Events which does result in a 72ppi jpeg. The problem though is that i cant seem to get any of the jpeg export options to work, it seems like it just exports with default settings.
Id like to change the jpeg compression and id like to export the entire dimensions of the artboard and only the artboard. Artboard Clipping is a property under Jpeg export in the applescript references but it doesnt seem to work so i must be doing something wrong.
Any help would be very much appreciated!
Attached is my applescript.
Thanks
J

OK i changed the code and I think I got it. Instead of setting a myOptions string variable and setting jpeg with myOptions I just typed it in at the export line. I also noticed that the resolution property i put in the options was causing a problem so i took that out.
I attached it for anyone who could use it.
J

Lightroom JPEG export VS Photoshop Image Processor

Hey guys:
Long time photoshop and lightroom user (long time user of all things Adobe). First post here in the forums. I did a search for my question but I think it was too specific, so it returned zero results.
My question is about Lightroom's JPEG export vs Photoshops Image Processor. When I export a RAW file to JPEG from Lightroom, the file size is freaking huge. The JPEG is as big as my original RAW file (~25mb). Settings are set to default - 100 quality. Everything else remains untouched.
However, when I use Photoshop's image processor (I launch it through Bridge, easier that way for me) and process the RAW images that way, my JPEGs are roughly 5-10mb in size. Settings in Image Processor are quality 10 and thats it. No actions being run or anything.
Can anyone shed some light as to why Lightroom exports JPEGs that are roughly 2-4 times the size of Photoshop's JPEGs? My initial thoughts are that the 100 quality setting in Lightroom is more like Photoshop's quality 12 (that always makes me think of Spinal Tap - "Why don't you just make ten louder and make ten be the top number and make that a little louder?" "These go to eleven.") Ideally, exporting out of Lightroom would be much easier for my workflow.
Thanks in advance.
-The Doctor

DrMilesBennell wrote:
Can anyone shed some light as to why Lightroom exports JPEGs that are roughly 2-4 times the size of Photoshop's JPEGs? My initial thoughts are that the 100 quality setting in Lightroom is more like Photoshop's quality 12 (that always makes me think of Spinal Tap - "Why don't you just make ten louder and make ten be the top number and make that a little louder?" "These go to eleven.") Ideally, exporting out of Lightroom would be much easier for my workflow.
You are correct: LR Quality 100 = PS Quality 12
Despite LR having 101 Quality settings (0 to 100) it actually only has 12 Quality settings the same as PS 'Baseline Standard':
JPEG Quality Setting Comparison
PS
LR
LR Range
Typical Reduction
0
0
0-7%
11%
1
10
8-15%
23%
2
20
16-23%
14%
3
30
24-30%
14%
4
35
31-38%
16%
5
40
39-46%
24%
6
50
47-53%
4%
7
55
54-61%
27%
8
65
62-69%
25%
9
70
70-76%
31%
10
80
77-84%
35%
11
90
85-92%
41%
12
100
93-100%
I keep a small copy of the above table taped to my monitor. I chose the numbers under the 'LR' column for the 12 steps (not AA's) to make it easier to remember. In actuality ANY number in the LR Range column will produce the same results for each step.
Under the 'Typical Reduction' column notice the small amount of reduction for PS 6 (LR 47-53%) Quality setting. If interested why AND why you probably shouldn't use PS 7 (LR 54-61%) Quality setting see this post:
http://forums.adobe.com/message/5641903#5641903

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

Having problems when exporting .swf file as an animated gif

Hi:
I was wondering if anyone has ever had any issues exporting a
flash file as an animated gif? When I do so, the image quality is
very compromised and the animation is distorted. I know this is not
very specific question, but I have never encountered this issue
before, and I am trying to help a co-worker. I don't understand why
it looks exactly the way we want it to look as an swf file, but not
as an animated gif? Can anyone point me in the right direction as
to what to look for as the potential source of this problem? I have
the swf file, although this would not be very helpful as I don't
have access to the flash file (but I can send it to you if that
would help). We tried unchecking the feature to optimize the image,
and changed the color pallete to adaptive, but this didn't solve
the problem. I also tried removing any unnecessary layers prior to
the export. Basically, I'm not sure as to how to proceed and what
may be causing the problem. I also want to mention there is a
placed image on the stage. Could the type of image placed be
causing the problem when exporting to a gif file, but not as a
.swf? If anyone could help, I would really appreciate it! Thanks.
Sara

I also wanted to mention that the swf file uses sound. I am
reading an old book that I have on Flash and it's saying that Flash
and Shockwave Flash enter a special mode when they encounter a
stream sound in which the animation is forced to keep up with the
sound track, if the animation frames can not be drawn quickly
enough, some frames are skipped. I am also reading that the
animated gif format does not support sound. Again, the only
reference I have is for a very old version of flash, and I'm not
sure it applies to CS3. I am now just thinking that the sound may
be the issue.

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Problem in Exporting a Report Group having a Report Painter Report.

I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
       group 0102CPDNUEA-CCROSI not transported.
       Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
    SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
    IF FILE_EXP <> 'X'.
      READ TABLE WT_E071 INDEX 1.
      IF SY-SUBRC = 0.
        LEAVE.
      ENDIF.
    ENDIF.
ELSE.                                "online
    SET PF-STATUS 'MENU'.
   PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram

Problem in exporting ALV Report to excel sheet

Hi All,
I have developed a Report and now facing problem in exporting the same to excel sheet.
When we click the "Locate File" icon in the report layout, the system will pop up a window with radio buttons. I have opted for 'Spreadsheet'.
When i save the excel sheet into my desktop, the excel file has all the report headers (Title of each column). But no value is exported.
There are around 15 columns in the report and the excel sheet shows value of last 2 columns which has some text.
I have been into ALV report development and developed around 30+ reports in the same fashion.
What might be the reason behind this issue?
When i export other reports into excel sheet, everything is perfect without any flaws......
Kindly help me out......
Regards
Pavan

Hi,
Here's my suggestion: Install OpenOffice.org and ask SAP to deliver good integration with OpenOffice.org.
Alternative suggestion: re-install SAP Gui on the PC where the integration is not working. If that does not help, re-install Microsoft Office as well.
Here's my comment: I think you should ask this question in a different forum, e.g. in the Duet forum. That may not be the correct forum either, but as it is a Microsoft/SAP integration technology forum, someone there may know the solution.
Regards,
Raj.

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Problem using Export in Oracle 8.1.6.

Hi,
I have a problem using export utility in oracle 8i.
I got a message:
EXP-00056: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00000: Export terminated unsuccessfully
I tried running CATPROC.sql and CATEXP.sql but it did not correct the problem.
Please help me.
Thanks

You may want to try using the error lookup tool available here, http://otn.oracle.com/pls/tahiti/tahiti.homepage?remark=tahiti You may be able to find the answer even though the error lookup tools is for 8.1.7 version. Otherwise, you can search the db discussion forums to see if this issue has been discussed already.

Problem jpeg export

Similar Messages

Maybe you are looking for