Problem justifying since Pages 5.0

The problem is this:
When I write work letters, I often write them in the format attached, particularly when making offers. Prior to Pages 5.0, when I put for example number 1 on the left and a subject header, I would then tab across to the right and start writing the bulk of the text. It used to justify perfectly and looked excellent.
However, since the upgrade last year, it now randomly chooses as to whether it will justify the right hand side. If you see the gobbledegook picture I have attached, you will see that for example in the first paragraph, some of the lines are justified and some aren't whilst on the RHS in the box it believes it is justified. FYI they are single paragraphs in each point so not sure why it is so inconsistent.
Has anyone else experienced this and if so, has anyone got a solution?
Many thanks

Hi Peter
OK, I have now done quite a few different trials and can tell you this.
Firstly, I have two different methods for indenting the paragraphs: One is simply using the tab key to the left of the 'Q' key which has always worked fine for me. The alternative is to drop tabs into the ruler bar at the top. Either way, it used to work fine pre-Pages 5.0, but not now.
Of more interest is this: when I carried out the exact same exercise on my son's MacBook Air, it justified it perfectly, just as it should. I then saved that document onto a USB stick, and loaded it onto my iMac, and then when I opened the document from the stick, it became unjustified again. I tried this with both methods of tabbing (i.e. the tab key and dropping tabs onto the ruler bar); both worked fine on my son's MBA, but when opened on my iMac, it didn't justify.
It is worth adding that I have the same problem on my work Mac and my home Mac, both running 10.9.3.
I then checked to see what the MBA was running and it was 10.9.1, so I updated the software to 10.9.3, and guess what? The problem appeared on the MBA. This therefore suggests an issue with 10.9.3?
A further check on my daughter's old MacBook (running Pages 4.0.1 on system 10.5.8) showed that the justifying worked fine on that too.
Which version are you running?

Similar Messages

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox s

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox several times; upgraded the latest flash plugin today, but no difference, symptoms are black play box with youtube and white box with Flixy. Disbale AV and antimalware makes no difference either.
== URL of affected sites ==
http://

I have a new problem with secondary web pages opening up without any action on my part other than simply moving the mouse pointer across the screen.

Problem with "Next Page" And "Zoom" in CrystalReportViewer With VS 2010

Hello,
i am using crystal report v 13 sp1 with visual studio 2010,
As mebtioned, the next page and the zoom is not working in my report, whiwh has as data source "Stored Procedure"
This is my code, and i think it's correct, i was using this code in previous versions of crystal report (cr10) and it worked fine,
When i used the Data set , the next page and zoom worked fine, but with stored procedure it doesn't work,
Note: when i open the Tree of Data on the left, then click on the next page or the zoom, it become funtional, it's very weird,
protected void *Page_Init*(object sender, EventArgs e)
if (!IsPostBack)
reportDocument = (ReportDocument)this.Page.Session ["_reportDocument"];
if (reportDocument != null)
string rptFile = reportDocument.FileName.Split('
', '/').Last();
LoadReportRessource(reportDocument);
TableLogOnInfo log = new TableLogOnInfo();
ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0]; //la premiere connectionstring
SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
log.ConnectionInfo.ServerName = SConn.DataSource;
log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
log.ConnectionInfo.UserID = SConn.UserID;
log.ConnectionInfo.Password = SConn.Password;
log.ConnectionInfo.Type = ConnectionInfoType.SQL;
for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
reportDocument.Database.Tables.ApplyLogOnInfo(log);
for (int i = 0; i < CrystalReportViewer1.LogOnInfo.Count; i++)
CrystalReportViewer1.LogOnInfo.ConnectionInfo = log.ConnectionInfo;
CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session ["_paramFields"];
CrystalReportViewer1.ReportSource = reportDocument;
CrystalReportViewer1.DataBind();
CrystalReportViewer1.ShowFirstPage();
else
CrystalReportViewer1.ReportSource = (ReportDocument)this.Page.Session ["_reportDocument"] ;
Edited by: Soumaya on Sep 7, 2011 6:16 PM

@Don:
Sorry, but i donno what do you mean by "what is the App Pool running in 32 or 64 bit?",
i am running the application locally, ( the IIS is installed locally ),
as i told you, my OS is 64bit,
And yes i tried a very simple report, with just one field , and the "next button" is also not working,
Its only not working with stored procedure, in the others methods ( push or pull method is working fine)
i think its a problem in refreshing page, because when i open the tree on the left, then click on next page or zoom, its works fine
@Ludek:
i changed my code as below, and it doesn't solve my problem:
        ReportDocument reportDocument;
        protected void Page_Init(object sender, EventArgs e)
            if (!IsPostBack)
                reportDocument = (ReportDocument)this.Page.Session["_reportDocument"];
                if (reportDocument != null)
                    string rptFile = reportDocument.FileName.Split('
', '/').Last();
                        TableLogOnInfo log = new TableLogOnInfo();
                        ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0];
                        SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
                        log.ConnectionInfo.ServerName = SConn.DataSource;
                        log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
                        log.ConnectionInfo.UserID = SConn.UserID;
                        log.ConnectionInfo.Password = SConn.Password;
                        log.ConnectionInfo.Type = ConnectionInfoType.SQL;
                        for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
                            reportDocument.Database.Tables<i>.ApplyLogOnInfo(log);
                    this.Page.Session["_reportDocument"] = reportDocument;
                    CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session["_paramFields"];
                    CrystalReportViewer1.ReportSource = reportDocument;
                    CrystalReportViewer1.ShowFirstPage();
            else
                CrystalReportViewer1.ReportSource = this.Page.Session["_reportDocument"];
Edited by: Soumaya on Sep 8, 2011 10:39 AM

A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore

I'm having a problem saving a pages document as another format, like a Word document or PDF file. I've never had this problem in the past. Please help me! I need to have this fixed a.s.a.p.

Hello everyone,
I'm currently having a problem saving a Pages document as another format, such as a Word document or PDF file. I've never had this problem before with Pages. Please help me! I need to have this completed a.s.a.p.
Thanks,
Amy

To save as a PDF, you do that from Print
To save as Wrod format, you export
Allan

Since Pages update, I am no longer able to save my documents in Word. Is there a way to do it?

Since Pages update, I am no longer able to save my documents in Word. Is there a way to do this?

Are you using Pages 5.2 on your Mac or Pages on your iPad, I ask because of your profile?
If it is Pages 5.2 on your Mac, use the Export option.

Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?

Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?

Greetings,
I have not heard of that issue although some people have reported events showing an hour earlier / later (though I haven't seen that personally).
Questions:
What version of the Mac OS are you running (Apple > About this Mac)?
Can you make an event and then it just disappears?
Are you using iCloud / MobileMe / Google / Yahoo / Some other server based calendar?
Try these in order:
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
Go to Apple Menu > System Preferences > Date & Time and make sure the Date and Time are correct and that the correct Time Zone is selected.
If that doesn't resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps.

Hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!!!

hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!
does anybody know how to solve this problem? thx!

If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0

In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

Problem printing flash pages - black box

Hello,
I am trying to help someone else in our office who is having
a problem with swf pages converted from PDF documents. The PDFs
were made from either Quark or Indesign documents. The pages
contain graphics, some of which are bitmap (one-color) images. All
looks good on screen when displayed in a browser, but when printed
the graphics become black boxes, as though a black background were
added to the image. Does anyone know why this is happening or can
someone suggest a workaround? We have thousands of pages that need
to print from our user's browsers but find we are plagued with this
issue. The weird thing is, I found that some of the bitmap images
were fine while most of them were bad. I used PitStop professional
to examine the PDFs and there is nothing different about the images
there.
Regards,
Len Swierski

Anybody figure this out???
We're having the same problem too. All of our flash paper
documents are being converted from PDFs that orignally came from
Quark or Indesign. The art department figured out that they could
fix the problem by converting the bitmaps to grayscale. (Our pages
are black and white anyway) We also found out that different
versions of acrobat could fix the probelm. Somtimes version 7 would
work and sometimes version 4 would work. A lot of trial and error
and wasting paper.

Problems with error-page in web.xml and page caching

Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
Despite this, the servlet exception error page still appears.
If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
I have implemented the service method for this test to throw the exceptions - does this make a differecne?
As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
Any help is appreciated

After further investigation: -
There are no problems with error pages based on error codes, only error exceptions.
As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
The error page for ServletException is therefore never reached.
I have the browser set to request pages every time it is asked.
Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

Error "problem loading more pages"

Using XP SP3, IE 8 and Acrobat Reader X, I have been trying to look at a document identified by a website as .pdf.
I see what appears to be the first page of that document - ie it makes perfect sense in the context of the website - but at the foot of the first page a message appears reading:
"Whoops! There is a problem loading more pages. Retrying..."
and nothing more happens.
On another PC, using XP SP3, IE 7, and Acrobat Reader XI, I cannot even get that first page up - after clicking on the link to the document, nothing happens,
Can anyone guess whether this is a problem with Acrobat Reader or IE? and if so, what might be done to fix it?

Your link is on Google Docs, which uses its own PDF viewer. I can see all pages with no problems.
If you use the download button on top of the page, you can download a perfect PDF to your local disk.
If that Wordpress page is yours, I would suggest that you upload the PDF to somewhere where it can be viewed with the browser's PDF plugin, not with the Google Docs PDF viewer.

Problem in getting Page nos in SFs

I have a problem in getting Page nos in SFs. My problem is that, I want to print multiple docs ie SELECT-OPTION case.
Here each doc has N no of pages. I want to print Page 1 of N for each doc. I used SFSY-PAGE / SFSY-FORMPAGES but its giving total no of pages. I want my page no has to reset for each doc.
Ex.. DOC 1 .... Page 1 of 3, 2 of 3 etc.
DOC2 .... Page 1 of 5 etc.
DOC3 .... Page 1 of 1 etc.
but its printing 1 of 9, 2 of 9 etc.
Plz help me in this reg.
Thanx in advance.

Hi Sachin,
Thanx for the reply but i think that u did not get my question correctly.
I said that if no of pages is greater than 10, then upto 9th page it is coming as Page 1 of *,..Page 2 of *, then after 10 the page, it is coming right.
For e.g. if the no of pages is 15, then it is coming as Page 1 of *, Page 2 of *....Page 9 of *, but from the 10th page, it is coming as Page 10 of 15 which is the correct way.

Problems Uploading a Pages file in html format including pictures to web pa

I have problems uploading a Pages file in html format to a web page.
The files itself is downloaded but the images are not. How can I upload a page file in html including the pictures or illustrations?

I just bought a macbook as well as the iwork software. I am having a few problems. I am a student and when I try to print out documents (originally word documents) it puts them automatically into textedit instead of pages. Also, the pages get all screwed up, things are missing, etc. How do I make pages my default and do i need to export? import? or do something so that these documents show up perfectly in pages?
A second questions- When i try to print out slideshows in keynote (originally from powerpoint) the handouts print on the little edge of the paper horizontally rather than the long way. I am hoping these are easy adjustments.
I would appreciate any help anyone can give me.
Thank you!

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Problem justifying since Pages 5.0

Similar Messages

Maybe you are looking for