Problem launching crystal report in Windows7, 64bit

We have report template created in Crystal Reports 11.
On client's machine, the crystal report runtime 11 is installed to view the report.
All works well in x32 machine.
We recently decided to install a client version on Win7, x64 machine.
I am AWARE that CR 11 is NOT SUPPORTED for x64 bit machine.
I have installed and tried the following runtime:
1. CR10.5, CRRedist2008_x64.msi (64 bit Intel)
2. CR2008 Sp2, CRRuntime_12_2_mlb.msi
The report did not launch and there is no error message generated.
Any help would be very much appreciated.
Thanks in advance.

What version of .NET are you using? What is the version of the CR assemblies referenced in your project?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Similar Messages

Problem in Crystal Report 2008 selectionFormula

Post Author: saro_j
CA Forum: Crystal Reports
Hi,
I am having a strange problem in Crystal report 2008. Earlier I was using VS 2005 Crystal report. Then we purchased Crystal report 2008.
When I open the VS 2005 projects it asks the reports to convert into Crystal report 2008. I did that.
Earlier I was using the following syntax for passing the date as selectionFormula
Dim selectionFormula As String = "{tblClient.Name} = '" & ddlClient.SelectedItem.Text & "' and {TBILL_File_Format.Week Ending Date} = #" _& Convert.ToDateTime(DtCtrlProDateFrom.DateTimeValue) & "#u201D WeeklyReportByClientNameReport.DataDefinition.RecordSelectionFormula = selectionFormula
But now when I run this same it says
This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind
I have no idea about this
Even If I tried to pass as follows
selectionFormula = "{TBILL_File_Format.Week Ending Date} = DateTime (2008, 04, 25, 00, 00, 00) and {TBILL_File_Format.Client Code} = 'ABC10' "
I couldnu2019t see any record on the report except Grouptree of the report. If I export the report it has all the data as I expected.
Please help me out on this regards.
Thanks in advance
Saravanan

Post Author: jehanzeb
CA Forum: Crystal Reports
Hello,
I use CR2008 and VS2005, it never asked me to convert the file into VS2005. What do you mean by VS 2005 asked you to convert the file? Did you make the file in CR2008 and then imported it into VS2005 as a Report Document?
I usually create a report on CR2008 and then move that report (copy) to the same folder as VS project folder, then from there I create a new Report Doc in VS and open the file.
As you mentioned when you export the report it works fine but when you run it it gives errors. I think it is because of the import of the report. Look at the error message as it says the field name is not known, I suspect it is not connected/imported properly.
"This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind"
I think it is becasue of the import of the report or could be becasue you didnt save the report with an option of "save report data". Check your report and reimport it. might fix the problem:D

I want to launch Crystal report using jsp

Hello All...
I try to launch Crystal reports from jsp.
i install crystal report and create one static report .
and then i put all jar files related to that in my lib folder..
which is in
webapps/ ApplicationName/WEB-INF/lib..
and write code to launch Crystal reports in jsp.
<%@page import="com.crystaldecisions.reports.sdk.ReportClientDocument,
               com.crystaldecisions.sdk.occa.report.lib.*,
                    java.sql.*,javax.sql.*,javax.naming.*,
                    com.crystaldecisions.report.web.viewer.CrPrintMode,
                    com.crystaldecisions.report.web.viewer.CrystalReportViewer,
                    com.crystaldecisions.sdk.occa.report.data.ConnectionInfos,
                    com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"
%>
<%// open the report rpt file
String REPORT_NAME = "Report1.rpt";
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(REPORT_NAME, 0);
// set up a viewer
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setOwnForm(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
// pass it the report source
viewer.setReportSource(reportClientDoc.getReportSource());
//Render the report.
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
%>
i get an error when i run application or that page
"ReportClientDocument cannot be resolved to a type"
please give me solution ..
Edited by: manojnikam on Jan 22, 2008 10:50 PM
Edited by: manojnikam on Jan 24, 2008 5:00 AM

ReportClientDocument So this class isn't found, probably because it's not in the server's classpath.
If you really can't recognize a basic compilation error like this, you might re-consider your place in the JEE world.

Problem in crystal reports

Hello
i have a problem in crystal report, i want to dispaly data from MYSql data base to crystal report through my application
I have'nt work on crystall report before this
please help me.....
thanks in advance

Some forums to try (or for someone who might land on this thread):
http://www.bing.com/search?q=crystal+reports+forum
http://forums.asp.net/76.aspx/1?Crystal+Reports
http://www.crystalreportsbook.com/forum/default.asp
http://scn.sap.com/community/crystal-reports-for-visual-studio/
http://forums.codeguru.com/forumdisplay.php?64-Crystal-Reports
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5

Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5.
NOTE: I did not check other Crystal Runtime versions.
Any solution?

Visual Studio Premium 2012.
It is a web application.
It was working fine with Crystal Report version 13.0.5. Only change is uninstall Crystal Report version 13.0.5 and install Crystal Report version 13.0.10
Entering page number works fine to view that page Request.Form parameters sample for that (change page from page 3 to page 5):
__CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"/wEXBAUkU3lzdGVtLldlYi5VSS5XZWJDb250cm9scy5XZWJDb250cm9sDxYGHgVXaWR0aBsAAAAAAABZQAcAAAAeBkhlaWdodBsAAAAAAABZQAcAAAAeBF8hU0ICgANkBQJodAUGX2JsYW5rBQ9SZXBvcnRWaWV3U3RhdGUXCAUDZHBpAngFB0lMT0lVSVNoBQdGYWN0b3J5BZYBQ3J5c3RhbERlY2lzaW9ucy5SZXBvcnRTb3VyY2UuUmVwb3J0U291cmNlRmFjdG9yeSxDcnlzdGFsRGVjaXNpb25zLlJlcG9ydFNvdXJjZSwgVmVyc2lvbj0xMy4wLjIwMDAuMCwgQ3VsdHVyZT1uZXV0cmFsLCBQdWJsaWNLZXlUb2tlbj02OTJmYmVhNTUyMWUxMzA0BQlSZXBvcnRVUkkFSkQ6XFBSSi5ORVRcV2ViUmVwb3J0czIwXFdlYlJlcG9ydHMuREFMXFJlcG9ydHNcVzJfNDMzN19SRVNfQllfQ1JFQVRJT04ucnB0BQpEZXNpZ25Nb2RlaAUHUmVmcmVzaGgFElBhZ2VSZXF1ZXN0Q29udGV4dBcEBRVJc0xhc3RQYWdlTnVtYmVyS25vd25nBQ5MYXN0UGFnZU51bWJlcgIFBQpQYWdlTnVtYmVyAgIFFEludGVyYWN0aXZlU29ydEluZm9zFClYU3lzdGVtLkJ5dGUsIG1zY29ybGliLCBWZXJzaW9uPTQuMC4wLjAsIEN1bHR1cmU9bmV1dHJhbCwgUHVibGljS2V5VG9rZW49Yjc3YTVjNTYxOTM0ZTA4OY0BAzwDPwN4A20DbAMgA3YDZQNyA3MDaQNvA24DPQMiAzEDLgMwAyIDPwM+Aw0DCgM8A0EDcgNyA2EDeQNPA2YDUwNvA3IDdANJA24DZgNvAyADeANtA2wDbgNzAzoDeANzA2kDPQMiA2gDdAN0A3ADOgMvAy8DdwN3A3cDLgN3AzMDLgNvA3IDZwMvAzIDMAMwAzEDLwNYA00DTANTA2MDaANlA20DYQMtA2kDbgNzA3QDYQNuA2MDZQMiAyADeANtA2wDbgNzAzoDeANzA2QDPQMiA2gDdAN0A3ADOgMvAy8DdwN3A3cDLgN3AzMDLgNvA3IDZwMvAzIDMAMwAzEDLwNYA00DTANTA2MDaANlA20DYQMiAyADLwM+BQlScHRTb3VyY2UFN0NyeXN0YWxEZWNpc2lvbnMuUmVwb3J0U291cmNlLk5vbkhUVFBDYWNoZWRSZXBvcnRTb3VyY2UFA2Nzc2U=", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
viewer_toptoolbar_search_textField:Bul...
text_viewer_toptoolbar_selectPg:5
text_viewer_toptoolbar_zoom:100%
__CALLBACKID:viewer
__CALLBACKPARAM:{"tb":"gototext", "text":"5"}
Try to view New Page does not work. Request.Form parameters sample for that (try change page from page 2 to page 3):
__CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"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", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
viewer_toptoolbar_search_textField:Bul...
text_viewer_toptoolbar_selectPg:2 / 5
text_viewer_toptoolbar_zoom:100%
__CALLBACKID:viewer
__CALLBACKPARAM:{"tb":"next"}

Probleme with crystal report : a report with 3 levels

hello...
please am a from france, i have a bad english so is there somme one how speak frensh, i have a probleme with crystal report...
so my first report, i have an XML file xith contine a lotof data, ils with a lot of level so i want that you show me how can i reprensent that, i can give u my wml file and also a word file to explain you what do i want comme result..
so i have donwload an evaluation version of crystal report...
thaks for u

Hi alpacino,
I know a really good actor that has the same name...and you're new to reports...hmmmmmmmm.....well, first of all,
bravo to you for being able to write english at all. I'm glad I don't have to learn it again.
Go to the Group Expert and select one of your "levels".
This will be your top group. Then select the next "level", etc.
I know you're not a dummy, but get a "Crystal Reports for Dummies" book and then a Crystal Reference book. The dummy books are actually pretty good and give you a "from the ground" start. Then keep coming back to the forum and test out your ideas by helping others.
Hope this helps,
The Panda

Probleming Installing Crystal Reports 2008 Service Pack 1 to Vista 64bit OS

Hi There,
Whenever I attempt to install SP1 to Crystal Reports 2008 I am unable to get past the disk space check. It just continues to display the message below.
"please wait while the installer finishes determining your disk space".
I found this to be an issue on the 64bit OS only because I can install to Vista 32bit no problem.
Please help.
Thanks
Mark

Hi Mark,
Try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Now try to install Crystal reports.
Regards,
Shweta

Problem in Crystal Report Viewer 2008

Dear all,
I found that the crystal report viewer 2008 (Windows XP) could not display report properly when the file extension is in upper case. (report.RPT). In order to view this report, I must launch the viewer and click file --> open --> select file name.
After rename the file name to report.rpt, I can the report by double click report file.
This problem does not exist in Crystal Report Viewer XI. Any people encounter this problem?
Michael LO

Windows 2000 is not supported in current versions of CR. Check the platforms PDF file.

Problem with Crystal reports for Eclipse and Postgres-databases

Hi,
Is there a known problem when using a PostgreSQL-database to create a report with Crystal reports Plugin? When I drag a table, then occurs a error-windows, that the object can't created.
I have found a workaround for solving the problem. After new installing Eclipse Platform Version: 3.4.1 Build id: M20080911-1700 and Crystal reports Plugin 11.8.6.v1371 with JRE 1.6.0_01 the error message allways occurs, when I select a table from a PostgreSQL database (Version 8.2). After restarting eclipse you see the last selected tables in the field explorer and you can drag the table fields in the report. A repeated choice of the same table causes aliases for the table in the field explorer after restarting eclipse.
Error.log:
eclipse.buildId=M20080911-1700
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Command-line arguments: -os win32 -ws win32 -arch x86
Error
Tue Dec 16 14:03:53 CET 2008
Verursacht durch: java.lang.IllegalArgumentException
com.businessobjects.crystalreports.designer.core.ReportException: java.lang.IllegalArgumentException
at com.businessobjects.crystalreports.designer.core.ExceptionFactory.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.ExceptionFactory.create(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.data.TableElement.add(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.AddCommand.doCommand(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.C(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.CoreCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(Unknown Source) at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:880)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:455)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:257)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method) at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:362)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:288)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:171)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalArgumentException---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source) at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
Best Regards
Arnold

Your issue appears to be a Crystal Reports for Eclipse report designer thing, and not a JRC runtime thing. The JRC runtime does support Type 4 JDBC drivers, but all modern PostgreSQL drivers are Type 4.
The current report designer is more restrictive than the JRC runtime - and PostgreSQL, being not on the supported platforms list, has never been tested with the embedded designer.
Unless there's anybody out there with experience with PostgreSQL and CR4E designer, who would be willing to share their experiences.
Sincerely,
Ted Ueda

Getting a 'Runtime Error' while launching Crystal Reports

Hello
I have Crystal Report XI R2 installed on an XP machine. However, while launching it, I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program ...am Fils\Business Objects\Crystal Reports 11.5\crw32.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Any help would be appreciated.
Thanks,
Alok.

Hi Alok
Are you logged in as Administrator?
If not try logging in as Administrator,is still the issue persists then you need to manually uninstall Crystal Reports and reinstall it again.
This issue happens because the installation of Crystal Reports has not been successful, despite a message stating that it has been successfully installed.
Manual Uninstalling Process:
Symptom
Crystal Reports XI is installed on your computer. You need to manually uninstall Crystal Reports XI for one of the following reasons:
u2022 To verify that all Crystal Reports XI components have been completely removed prior to installing a later version of Crystal Reports.
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the 'Add/Remove Programs' command (Start > Settings > Control Panel).
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the Setup.exe file from Crystal Reports XI installation CD.
How do you manually uninstall Crystal Reports XI?
Resolution
Before getting started, uninstall Crystal Reports XI by launching the Setup.exe file from the installation CD or by using the 'Add/Remove Programs' command. If either of these methods fails to remove all Crystal Reports directories, files and registry keys, then continue with the resolution of this article.
==========
WARNING:
This resolution can be applied if Crystal Reports XI is the only software installed on the computer that uses the Business Objects directories, files and registry keys.
For example, Crystal Analysis, Crystal Enterprise and BusinessObjects Enterprise XI are applications that may share the same directories, files and registry keys.
Removing these directories, files and registry keys may cause other software to function incorrectly.
==========
1. To manually uninstall Crystal Reports XI, delete the following directories:
u2022 C:\Program Files\Common Files\Business Objects\3.0
u2022 C:\Program Files\Business Objects
====================
NOTE:
Do not remove the directory C:\Program Files\Common Files\Business Objects\3.0 if you have BusinessObjects Enterprise XI or Crystal Reports Server XI installed. These files are shared by both applications and removal of these files will cause Business ObjectsEnterprise XI and Crystal Reports Server XI to function incorrectly.
====================
2. Delete the following registry keys:
====================
WARNING:
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk.
HELP:
For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
RECOMMENDATION:
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
====================
u2022 HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\
u2022 HKEY_CURRENT_USER\Software\Business Objects\Suite 11.0\Crystal Reports
u2022 HKEY_USERS\S-#-#-##-...-####\Software\Business Objects\Suite 11.0\Crystal Reports
(The number signs (#) represent a series of numbers that are different on each computer.)
====================
NOTE:
After making changes to the registry, restart the affected service or application as required.
====================
Hope this Helps,
Shraddha

Problem installing Crystal Reports 2013 on a Windows 2012 R2 server

Sheesh. One of my users needs crystal reports and still uses it weekly. It's time to update off of an old 2003 server so I setup a new Windows 2012 R2 server so that she and others can RDP into it and use the application and reports (it's a payroll thing so they want limited access).
So - totally plain vanilla Windows 2012 R2 install. Then make sure I have all the .net stuff installed in the windows features.
But, whenever I run the setup.exe from the downloaded ZIP file from the sap store I get:
(1) "Assertion failure: A fatal error has occured which has caused the installer to quit. Please gather any %TEMP% and installer logs to present to your support personnel."
(2) Then followed by the message:
Microsoft Visual C++ Runtime Library -- Runtime Error! Programs: C:\install\CrystalReports\setup.engine\SetupEngine.exe This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information.
(3) Then:
Problem signature:
Problem Event Name: APPCRASH
Application Name: SetupEngine.exe
Application Version: 60.0.0.62
Application Timestamp: 543416b3
Fault Module Name: SetupEngine.exe
Fault Module Version: 60.0.0.62
Fault Module Timestamp: 543416b3
Exception Code: 40000015
Exception Offset: 00131ee9
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: ee59
Additional Information 2: ee59ff165b01a7b873dafe8afa2598dc
Additional Information 3: f1a8
Additional Information 4: f1a876ca1cb1cf9f6541ac072dd70f88
I can't find any information on this! I have found a similar message that refers to a 2011 install that was fixed with a SP9? But this machine has no current install. I did buy the full version two days ago online from the sap store.

There is an older C++ library that you need that is not available by default on Win 2012. You can get the install for this here:
Download Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC Security Update from Official Microsoft Do…
Also, be sure you're logged in with Administrator rights, the right-click and "Run as Administrator" when you run setup. You might also have to turn off the Windows Firewall when you run the install (you can turn it back on again after the install is complete.)
-Dell
Message was edited by: Dell Stinnett-Christy

Problem in crystal report API....

Post Author: Pugalendran P
CA Forum: Crystal Reports
Hi
      I am migrating a report from version 8.5 to 11. The Report is having only one Parameter Field named as JOBID.
      I am using the API, PEGetNParameterFields to return the number of parameters. If i call the API ( PEGetNParameterFields ), which is in the CRPE32.dll of version 8.5 then the API function is returning 1. If the call the API(PEGetNParameterFields ), which is in the CRPE32.dll of version 11 then the API function returns the value as 0.
    I add one more parameter field DUMMYID in the same report after the JOBID in the version 11, then the API function is returns the value 1. API PEGetNParameterFields is recognizing the newly Parameter DUMMYID and not recognizing the JOBID
    But if i read the first parameter using PEGetNthParameterField, then it is returning JOBID.
    PEGetNthParameterField is recognizing the JOBIDand PEGetNParameterFields is not recognizing the JOBID.
   Can anyone help me on this?
Thanks in Advance

thanks for your reply,
but there is one problem , i just want to show the count of dead persons caused by nature or violent like follow
Persons dead naturally   20
persons dead Violently     25
     total                               45
for this i have to use all three tables and i did that,
but i don't know how crystal reports applying join on them ,
As i am using crystal report's plugin in eclipse , i am doing drag n drop of tables in data field and and as per their relationship i joined them
for your information i don't know which version of crystal report i am using , but when i use window->preferences->crystal report->crystal report application , it showing me available version 11.8.0
Please let me know if you need further information
Edited by: Pankajjain15 on Jul 6, 2009 10:18 AM

Problem in Crystal Report 11 Logon failed Vendor Code 4060- Please help

We are using VB 6.0 as front end, SQL 2005 Express edition as a data base server back end and crystal report 11 as reporting tool on Windows XP with SP2. The problem is, In the local system where DB exits the report generates fine. But if DB in network system the report will not work and it will ask for connection information (Provide necessary information to Logon to the chosen data source). We are using ODBC to connect the report. And if we give the correct password the report will generate
I have checked all your help file and sample code but solution not found. please help as soon as possible
Regards
Karthik

Hi Karthik,
Ensure the report is using the correct connection information. For example, the data source name, server name, database name, and user name are correct.
In a database-client test tool, ensure that the fields, tables, and procedures used by the report exist and that SQL queries can be executed against them.
In the Crystal Reports designer, verify that the SQL query, as shown under the Database menu Show SQL Query option, does not contain syntax errors.
If the SQL query shown in Crystal Reports is valid, execute the same SQL query through a database-client test tool.
Is report working fine in designer?
Which database connection are you using?
Regards,
Shweta

Paging problem with Crystal Report Viewer in VS 2013

I am attempting to upgrade a VS 2008 project that uses a dozen plus Crystal Reports to display data for our owners.
The problem that i am having is with navigating to other pages of any multiple page report using the paging buttons of the Report Viewer control. The report will load fine and display the first page. If I try and go to page two an overlay covers the screen and a progress graphic displays and will never go away. I have to stop debugging the project and restart it. I have been able to get the paging buttons to work if I click on one of the asp.net buttons that I have added to the page that run the .ShowFirstPage(), .ShowNextPage();.ShowPreviousPage(); or .ShowLastPage(); methods of the ReportViewer control. When in click on one of these buttons an error displays within the ReportViewer control that reads simply "ERROR". From there I can click on one of the asp.net button described above and the report displays and at this time the navigation buttons work as expected.
The parameters are being set via a series of asp controls and then stored in ViewState then passed to the ParameterFieldInfo of the ReportViewer control.
This all works just fine in VS 2008 project but I have not been able to resolve the paging issue since upgrading.
Does anyone have any ideas as two what may be causing this behavior?

Thanks for your reply.
I am on SP 9.
I moved the block assigning the report source of the ReportViewer to the Page_Init method, but that did not change anything.
The reports are loaded when the user clicks on a link button specifying the report that they wish to view. In the click event of the button a method is called to set the LogOnInfo for each table of the reportsource;
Tables tables = reportSource.ReportDocument.Database.Tables;
foreach ( CrystalDecisions.CrystalReports.Engine.Table table in tables ) {
var logonInfo = table.LogOnInfo;
logonInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo( logonInfo );
Then all the parameters are set;
crvReportViewer.Visible = true;
crvReportViewer.ParameterFieldInfo.Clear();
SetDateValuesForParameterFields();
SetEquipClassValuesForParameterFields();
crvReportViewer.ParameterFieldInfo = paramFields;
crvReportViewer.ParameterFieldInfo.AddRange( equipClassParamFields );
Session[ "CurrentReportSource" ] = crvReportViewer.ReportSource;
Then in the Page_Init I assign the ReportSource of the ReportViewer control;
if (Session["CurrentReportSourceId"] != null)
crvReportViewer.ReportSource = Session["CurrentReportSource"];
And in Page_Load;
if ( Page.IsPostBack ) {
ApplicationSettings appSettings = AppConfigSettings.LoadSettings();
connectionInfo.ServerName = appSettings.PrimarySettings.Server;
connectionInfo.DatabaseName = appSettings.PrimarySettings.DataSource;
connectionInfo.UserID = appSettings.PrimarySettings.UserId;
connectionInfo.Password = appSettings.PrimarySettings.Password;
startDate.Name = "StartDate";
endDate.Name = "EndDate";
trailerNumber.Name = "TrailerNumber";
location.Name = "LocationId";
equipClass.Name = "EquipClass";
txtStartDate.Focus();
When in run this the reports will populate and display the first page but if I try to navigate to another page I get a error;
Unhandled exception at line 12, column 82761 in http://localhost:63034/aspnet_client/system_web/4_0_30319/crystalreportviewers13/allInOne.js
0x800a138f - Java Script runtime error: Unable to get property 'length' of undefined or null reference
And on the screen there is a wait spinner.
This all works fine in the VS2008 project.
Thanks,
Shannon

Problem with crystal report that comes with VStudio 2008 Database edition

Hello,
I'm using crystal reports that comes with Visual Studio 2008 Database edition. But I'm having a problem these days. When there are more than 4 pages in the report, the summary field in the pagefooter(usually sum of data in the Details section) show 0 in the first page.It will be displaying in all other pages. I couldnt sort out the problem.I'm binding data to the report from an SQL Server 2005 table.
Thanks in advance.I really appreciate if some one can sort out the problem quickly.

Have not heard of the issue, but download SP1 and see if that helps:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Problem launching crystal report in Windows7, 64bit

Similar Messages

Maybe you are looking for