Problem launching flash cs5 and cs5.5 on windows vista

Hello Every Body. I have a problem launching flash cs5 and cs5.5 on windows vista home premium edition. When i launch it, the register screen appears(the one that tells the trial time left) but the flash main window always stays black (or white)and is not responding. I had it working about one week ago and i can't figure out what is the problem .It tried reinstalling couple of times without succes. I also tried deleting the left flash cs5 program files after uninstall but it didn't work . I would need your advice. Here is the screen as it appears:
BEFORE I CLICK IT IT IS BLACK9(notice that in the up bar it sais not responding)
Thanks
-jeremyskateboard

here is the black screen i get

Similar Messages

Newbie problems installing Flash 11 and windows 7/SWF issues-PLEASE HELP!

I am VERY new at Dreamweaver (llike four days in) - my church has a website & they need someone to take it over so I'm trying to help out while teaching myself something new.
I was doing okay til now. I downloaded a free template to play with so as not to mess up their real site just yet. I was able to get the majority of the site up except for the top part with flash. Error message says: "this page contains some SWF objects that may not work properly in the most recent versions of IE. Dreamweaver cannot convert them to SWF markups. Please delete each of them and insert again" This mesage comes up on the index.html, index-1.html, and index-2.html pages.
I deleted & re-typed everything that had an SWF in it (then realized maybe I only needed to do the ones with the .swf extension, duh on me!) but I'm still getting a gray box with the "f" inside.
Additionally, I keep having to re-install Flash because it says I have to use version 10 or higher - the browserlab worked during the online lessons offered by Adobe, but now it won't work at all! I installed Flash 11 more times than I can count but it still won't work, yet when I go to my Programs flash it's installed twice - once as a 64 bit and once without. I'm assuming one of those can go.
I'm familiar with HTML and have created smaller websites using templates on sites like Yahoo Business, Wix and Office Live and thought I could handle this, but it's really stumping me, thought there'd be a learning curve and trial/error but WOW! Much respect to all you web designers out there, this stuff is no joke!
If anyone could please help me fix this problem and dumb your answer down as much as possible cuz I'm admittedly very lost! I'm worried that I'll have the same problem with the church site because they want some flash aspects. Did several internet searches & couldn't decipher the programmer jargon, nor could figure out if I was doing the suggested fixes correctly.
Thanks in advance for the help from anyone! I have a brand new computer, dell xps15 only 3 weeks old, so it's not the computer!
Anne

FYI: Dreamweaver questions are better answered in DW's General Discussion Forum.
http://forums.adobe.com/community/dreamweaver/dreamweaver_general?view=discussions
Older versions of DW used an Active-X JavaScript to initialize Flash in IE browsers. Adobe later switched to a different script in CS4 and again in CS5 and CS5.5 which uses SWF Object Replacement. I suspect your Template was made with an older version of Flash & DW which is why you're getting the nag screens.
Option 1: Preview the original template pages in browsers. If it works, ignore the DW error messages.
Option 2: Rebuild the Template by stripping all Flash object and embed code and removing links to any Flash supporting scripts. Then re-insert your media. Insert > Media > Flash...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Adding Flash Player 11 support to Flash Pro CS5 and CS5.5

http://blogs.adobe.com/rgalvan/2011/11/adding-fp11-support-to-flash-pro-cs5-and-cs5-5.html
by Rich Galvan @Adobe
MXP has been released. I tested on CS5 and seems to work
Kenneth Kawamoto
http://www.materiaprima.co.uk/

Yes you could but that also displays the debug movie console which is uneccessary if you just want to quickly test your movie.
I find myself using Test Movie hundreds of times a day and I just want a clean, quick, uncluttered view of how my work will look.
I do use Debug Movie but only occasionally.
More importantly though is that I'm not sure FP11 is ready yet. Its got a pretty horrible bug that really affects my work:
http://forums.adobe.com/message/3993046#3993046
Just my opinion!

Flash CS5 and CS5.5 Crash when compiling

Hey,
We're running into an issue where CS5 and CS5.5 are crashing when compiling an FLA. Our class structure is rather large, and it seems flash is running out of memory. We narrowed it down to commenting/uncommenting any line of code will let it compile or crash. I can literally open any as file from our project, comment out 1 line of code and it will compile, comment it back in and flash crashes. Has anyone run into something like this before, and have any advice on fixing it?

Hi Morf,
I can't reproduce your crash. Can you please send me the file up to the point where you saved? Please zip the file, change .zip extension to .zzz, email the attachment to my attention at [email protected]
Thanks,
Quynh
Flash Pro, QE

Two versions of Bridge installed - CS5 and CS5.1 - how to remove one?

Looks like this happened by installing Photoshop CS5.1 first, then Flash CS5 after that. Now I have two versions of Adobe Bridge, along with Extension Manager and a bunch of other redundant stuff now
This is causing me multiple problems:
1) the right-click menu "Browse with Adobe Brigde CS5" is set to the old version. Probably because it installed afterward (?). This is no good. I want it to default to the newer version obviously.
2) I am getting a lot of performance errors - the "not enough drive space" kind of error, when I just try to zoom in on a single small image in a folder with only a couple images in it. Bear in mind I have 12GB of RAM running here.
How do uninstall the old versions!?? Note, I ALSO have an old old version of Adobe Bridge that came from an install of some CS2 components!!! It's out of control and aggravating.
Please help
- Jon

It is usually recommeded you keep old versions rather than removing them. Some users run in to file association problems when removing older versions. The file association goes back to the version removed if you can comprehend that.
The versions should not conflict with one another. HOWEVER, you can run only one Bridge version at a time.
It is also recommended you install programs in order. So if you installed the newer one first and then the older one you can upset the file associate order. You can try to fix that first and then uninstall if that does not work. Go go edit.file type associations see what the dafault programs are listed as CS5 or CS5.1. There is a radio button on the bottom to reset these to factory default, and this sometimes works.
If not I would uninstall CS5 and CS5.1 and install the older one first. Or if you don't want CS5 on machine just install CS5.1. To be on the safe side you could run Adobe Script cleaner which will delete bits that the uninstall process did not get.

Flex not embedding metadata in CS5 and CS5.5

I believe we have a problem related to:
http://blog.natebeck.net/2011/05/flex-sdk-4-5-doesnt-keep-embed-metadata/
The project is a CS4 fla that has numerous files embedded with metadata tags:
[Embed(source = "campaign.xml", mimeType = "application/octet-stream")] public static var campaignData:Class;
[Embed(source="mirror.pbj", mimeType="application/octet-stream")] public static var MirrorShader:Class;
[Embed(source="rotateCW.pbj", mimeType="application/octet-stream")] public static var RotateCWShader:Class;
[Embed(source = "shopUpgrades.json", mimeType = "application/octet-stream")] public static var upgradesData:Class;
[Embed(source = "help.txt", mimeType = "application/octet-stream")] public static var helpData:Class;
None of the embedded data is being loaded in when compiled with CS5 or CS5.5
This is a serious issue for us as it means that all of our Flash 10 projects are now uncompilable in CS5 and CS5.5 and we are unable to make money on these projects.
What work around can we implement to solve this?

what exactly is your requirement. I have been able to read and write using property XMPString
this is the way to start, refer to extended toolkit documentation for XML class.
var oXML = new XML(app.activeDocument.XMPString);

Indesign CS5 and CS5.5 crash on new document / Lion 10.7

Hello!
In our agency we encountered a problem since upgrading to OS X Lion 10.7. Both our Indesign CS5 and CS5.5 keep crashing on us whetver we open an existing document or create a new one. We tried to clean-up our installations, deleted both, installed just CS5 and/ CS5.5 - trashed preferences etc. pp. Nothing worked.
Indesign opens like it should - but the moment we create a document it just hangs with the spinning ball - does anyone else can recreate the issue? We use no plugins in indesign only the app "Fontcase" from the Appstore to maintain our collection of fonts.. but we even tried to deactivate this app to see if it helps - no success.
We currently cant set up the system new since it is time consuming and just our last choice.. is there some other way to find the problem? We also never see the adobe crash-reporter.. not even after 10-15 minutes as stated in the lion os x issue list.
Thanks!

Ah, this is easy.
You have a problem with the SING module, see http://kb2.adobe.com/cps/408/kb408816.html.
2619 ??? (in Document Actions) load address 0x12061000 + 0x2e08 [0x12063e08]
2619 GetPlugIn (in AppFramework) + 57129 [0x1103f769]
2619 GetPlugIn (in AppFramework) + 54943 [0x1103eedf]
2619 GetPlugIn (in Font Manager) + 205284 [0x12b17074]
2619 GetPlugIn (in Font Manager) + 54889 [0x12af24f9]
2619 GetPlugIn (in Font Manager) + 53411 [0x12af1f33]
2619 GetPlugIn (in Font Manager) + 54444 [0x12af233c]
2619 GetPlugIn (in Font Manager) + 53832 [0x12af20d8]
2619 GetPlugIn (in Font Manager) + 46910 [0x12af05ce]
2619 GetPlugIn (in Font Manager) + 160199 [0x12b0c057]
2619 GetPlugIn (in Font Manager) + 124761 [0x12b035e9]
2619 GetPlugIn (in Font Manager) + 430364 [0x12b4dfac]
2619 ??? (in Font Manager) load address 0x12abd000 + 0x2000a [0x12add00a]
2619 GetPlugIn (in AppFramework) + 57129 [0x1103f769]
2619 GetPlugIn (in AppFramework) + 54943 [0x1103eedf]
2619 GetPlugIn (in SING) + 21595 [0x106e933b]
2619 GetPlugIn (in SING) + 20802 [0x106e9022]
2619 GetPlugIn (in SING) + 52092 [0x106f0a5c]
2619 SINGDLLStorage_GetGlyphlet (in SING) + 94 [0x1801977a]
2619 SINGDLLStorage_GetGlyphlet (in SINGCore) + 127 [0x180a527b]
2619 SINGStorage_GetGlyphletWorker(_t_SINGCtx*, char const*, unsigned long, unsigned char**, unsigned long*) (in SINGCore) + 87 [0x180a4eb9]
2619 GetDocument(_t_SINGCtx*, unsigned long) (in SINGCore) + 280 [0x1809a820]
2619 SINGLIB::ContextImpl::GetRootDocument() const (in SINGCore) + 269 [0x1805d92b]
2619 SINGLIB::CatalogOperationContext::CatalogOperationContext(boost::shared_ptr<SINGLIB::Context>) (in SINGCore) + 155 [0x180820cd]
2619 SINGLIB::SystemLock::Acquire() (in SINGCore) + 32 [0x18082b12]
2619 __sem_wait_nocancel (in libsystem_kernel.dylib) + 10 [0x9c62bb7a]

Retrieve CS5 and CS5.5 installation path from registry

Hello,
I have Photoshop CS5 and CS5.5 (5.1) installed on my PC. I want to retrieve installation path for both but in registry i am able to see only CS5.5 (5.1) path. From where i can retrieve CS5 installation path?
I think registry entry for CS5 is replaced by CS5.1. Is it possible to retrieve CS5 installation path?
Thanks.

Hi Carl,
I had looked at the link you posted earlier too.. I see that you had posetd the answer then too! So, I can post my queries to you directly!
I created a jsx file named "Result.jsx", which I saved in my D drive, with the following code,
resultFile = new File("D:/result.log");
resultFile.open("w");
resultFile.write(BridgeTalk.__diagnostics__);
resultFile.close();
If I run this directly from ESTK, there is no problem, and I get the result.log file. I tried to execute this script via command line as shown in the screenshot,
On executing the above, I got the following error,
What am I doing wrong? I need to do this urgently. Please suggest a solution..
Thanks!

Different versions of Adobe Creative Suite Compatibility (CS5 and CS5.5)

Our marketing team has two different versions of Adobe Creative Suite (CS5 and CS5.5). We can save the CS5.5 down to an IDML document so users with CS5 can open/manipulate the file but it reduces the file size significantly. What I do not know is if this saving down process reduces the quality of the file?? I am relatively inexperienced with these programs as I am self-taught. Thanks for your help!

IDML is good for repairing files.
But IDML is not good to be used as exchange in a workflow because every export of IDML can change things in an unexpected way. So I would strongly recommend that everyone in the department involved in the workflow uses the very same version, anything else will let you struggle in a later point of time. When I have to exchange files with a client I use always their versions and avoid IDML in exchanging files in any case possible.
Between CS5.0 and 5.5 are also several changes possible, because some bugs related to the text engine became fixed. E.g. in CS5 if you had an automatic TOC or cross reference in a text frame with 1 or 3 round corners and 3 or 1 normal corners, automatic number got shuffled in that frame, like page 345 became 543. When this was fixed some changes in the text engine have been done.

Indesign CS5 and CS5.5 missed INX

If cant able to delete the colors from swatchs that time export to inx and open it in text editor and find the color value and just delete it in Indesign CS3.,
But we missed inx in CS5 and CS5.5, Hope everybudy know that .INX is replaced by IDML,
If in case we face the above issue how can we solve it,

If this is just to delete colour swatches that you can't get rid of any other way there's a faster way that might work.
Make an object that uses the swatch.
Cut that object to a new InDesign document.
Save and close that new document.
Place that new document into the original document.
Delete it.
You should be able to now delete the swatch.
It's taken me longer to type this than it would have to do it!

Photoshop CS5 and CS5 Extended

I would like you to please comment on the differences between Photoshop CS5 and CS5 Extended as it relates to Photographers.

Try the CS forum for best advice, this is only Elements.
http://forums.adobe.com/community/photoshop/general

Full Screen in CS5 and CS5.1 is not Supporting the Menus Items like CS4 This is happening while

Full Screen in CS5 and CS5.1 is not Supporting the Menus Items like CS4
This is happening while working in the balck screen and using shortkut Keys for top menu. the tools are woring, but while using Alt Key to choosing the menu item. its not supporting. like the older vesions
please answer me

Can you please be a little more clear about what you expect it to do vs. what it's doing.
Are you using the "Full Screen With Menus" mode or the complete "Full Screen" mode? I just tried the "Full Screen With Menus" mode and was able to use the Alt key to initiate menu operations.
-Noel

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

Are the songs playing whole in iTunes? if not download them again.
else read this Apple Support Article on your problem
Have a nice day!

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device S

I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device Service and uninstall and reinstall Itunes but still giving me the same error.

http://support.apple.com/kb/HT3965

Problem launching flash cs5 and cs5.5 on windows vista

Similar Messages

Maybe you are looking for