Problem launching itunes after upgrade to version 7.

launching itunes in another newly created 'administrator' ser name does work. how can i get it to launch with my normal username ? i tried deleting the apple folder in local settings, and application data under my normal username or copy the folder from the new 'administrator' into my normal username, but to no avail yet....
Any help ?

Hi Jason,
I went through the whole msconfig menu and tried to launch itunes but no luck.
Also deleting the file in C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info did not work. After I restarted and launched itunes, box came up stating it was installing itunes, but then it disappeared again. It is still trying to launch and I can see it appearing for one second in the Task Manager if I try to open itunes, but then it disappears and all goes quiet.
I have a Trend Micro Office Scan system operating on my lap top. But then again the 'administrator' user account uses the same settings and can launch itunes....
so the multimilliondollar question is how can I launch itunes within my own user account... Version 6 ran perfectly....

Similar Messages

Problem with iTunes after upgrading

Hey guys my name is jake and my issue is so:
i've upgraded my iTunes to the latest version 7.4.3 yesterday and on the same day i've installed quick time 6.5 codec for some work i needed.
now i dont know if the quick time install is relate to it but since then my itunes wont open. it just errors me and ask me if i want to send or not to send eroor report
when running quicktime( the one came with itunes) it says buffer overrun detected
i tried reinstalling itunes few times and tried to install it on older version
nothing has worked. also removed the ipod driver and reinstalled it
havent worked either.
any advices?
thanks ahead
Jake

I recently upgraded to the latest that was offered and I think it was 7.4.1. Have they made a newer one since then??
Anyways, I had a problem immediately. I have a large majority of my music on an external hard drive, and some downloaded music on my computer. After upgrading, itunes would not work, and I discovered that when I unplugged the external hard drive (which contains most of my music) itunes did work and played what was already on my laptop. Everytime I try to plug my external hard drive back in, the same problem occurs: itunes freezes and I have to shut my computer down. I also noticed that it says I have something like 6000 songs and 347 GB! I don't know how many gigs 6000 songs might be depending on length, but there is no way I have 347 gigs of music since I have nowhere near that amount of space on my hard drive and external hard drive nor do I have that much music anyways...no CLUE what is going on here.
I'm afraid to delete itunes and reinstall it because I don't want the downloaded music on my computer to be deleted and I don't currently hve a place to back it up. Have you found any solutions/know what's going on with me??

Problem launching itunes after unplug my iphone

seems like the problem occurs after i upgarde the itunes and my iphones firmware.
i can open and close my itunes as many times as i want without any isses but once i plug my iphone to my computer and eject after sync and close my itunes, i can't reopen my itunes. i have to go to the task manager and force the program to close and then i can open my itunes again.
strange, anyone has the problem?

wow, just browse aorund all the posts, i think lot of people having similar problems with windows 7 launching itunes.

Problems downloading iTunes after upgrading to Windows 8.1

I just upgraded to WIndows 8.1. When I opened my iTunes it said there was an update was available. I tried to update my iTunes but kept getting errors. SO i decided to try and download the update later but when I tried to go to the iTunes store I got an error saying there was a problem accessing the iTunes store and then my iTunes closed. I looked at some of the comments in the community and tried uninstalling it and reinstalling it. Now when I try to download itunes I keep getting the following error:
I am the only user of the computer and the only administrator. I tried downloading the installer and then right clicking on it and selecting 'run as administrator' and this also doesn't work.
Please help
Thanks

"The installer has insufficient privileges to access this directory: C:\Program Files(x86)\iTunes\iTunes.Resources\sk.lproj\Printing Templates. The instillation cannot continue. Log on as administrator or contact your system administrator."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Windows 8 instructions in the following document: Disk Error Checking in Windows 8
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Problem starting Itunes after upgrading

Hi I have a major proble which I can't figure out. I just upgradet to the new version of Itunes and have succesfully instaled it but after i open the application it starts with the ..agree/dissagree box and then it gives a message "aplication cannot be opened. An unknown error ocured(50)." If any body has an idea what the problem is and how i can fix it it will save my life! tank you

OK. This solved it for me. See my post above. I found the solution below under a similar thread "Mac Itune issues." It worked just as stated.
Bulu86
New! Re: Mac Itune issues
Posted: Oct 13, 2006 9:32 PM in response to: Bawls07
Go to Macintosh HD > Library > Receipts
Trash any files that say iTunes and empty the trash
Then run the iTunes installer (I had to redownload it)
It should work then! Mine did I even installed the newest version again and it's all ok.

Problem opening iTunes after downloading latest version

I have got windows vista. Been using iTunes for awhile, but after downloading the latest version of iTunes the other day, I'm unable to open it up. A box pops up with this message: "The file "iTunes Library.itl" cannot be read because it was created by a newer versions of iTunes."
Anyone know what I should do?
thanks, david

I live way out in the bush
I thought it was only New Zealanders and Australians who used that expression.
If you did the install "on-line" using the website-download-location, then the iTunesSetup.exe doesn't necessarily show up on the PC in any obvious places ... although you might be able to track down a copy in your Temp directory or your Temporary Internet files. If you did the update using Apple Software Update for Windows, ASU doesn't download the iTunesSetup.exe. Rather, it downloads the different components from the installer as seperate .msi files (iTunes.msi, QuickTime.msi, AppleApplicationSupport.msi and so on). You might find some of those in your ASU Downloaded Applications folder. (Launch ASU, and go "Tools > Open Downloaded Updates folder" to check for those.)
But probably best to get an iTunesSetup.exe from in town, I think ... the one in the Temp directory or the .msi files might be a bit damaged (one possible cause of the trouble with the earlier install. So usually it's safest to use a fresh one with this particular error message.

Problems with iTunes after upgrading to 4.3!

After I have upgraded to 4.3 iTunes tells me my iPhone is connected to another Medialibrary (don't know the correct english word). So now I have several Apps on my iPhone, no one in iTunes and I will loose them when I syncronize with iTunes. How can I save all Apps and settings in my iPhone?
Message was edited by: Crilodan

Solved it.

Failure to Launch iTunes after Upgrading

I recently upgraded iTunes to whatever version is most current, and I cannot open it. Whenever I try to open it, I get a message that says
Error writing to file: C:\Program Files\iTunes.Resources\iTunes.dll Verify that you have access to that directory
and it tells me Retry or Cancel. i have to click cancel because retry just brings the same message up. when i click cancel, it tells me "Fatal error during installation"
I have tried reinstalling the new itunes. i have even tried completely uninstalling it, but i cant do that either, it tells me the same thing about verifying that i have access to that file.
please help. i miss my music.

+Error writing to file: C:\Program Files\iTunes.Resources\iTunes.dll Verify that you have access to that directory+
I associate that sort of message with file damage. (Often it will come with a 2330 error message number.) As often as not, the damage is associated with disk damage near the location of the file.
So let's try running a chkdsk over the C drive:
How to perform disk error checking in Windows XP
Does the chkdsk find/repair any damage? if so, does an iTunes install go through properly afterwards?

Problems with ITUNES after upgrade

I Have a G3ibook 60 gig hard drive.Finally upgraded from OS9 to OSX Tiger. Unfortunately, my ITUNES library and playlists did not come across. Tried moving library and 1300 of 1800 songs did come across. NO playlists though. Have tried trashing preferences etc. but nothing seems to work . Tired of shooting at fish in a barrel. Can anybody help?

I can only take a guess, as Colin said, but my guess is as follows:
Take a look at this:
What are the iTunes library files?
When you moved your songs did you leave those 2 files in the original ~/Music?iTunes folder? If you didn't, that will make iTunes lose your playlists, etc.
Tunes Library(iTunes Library.itl in Windows)
This file is a database of the songs in your library and the playlists you've created. Some song-specific data is saved in this file. If you delete the file, iTunes creates a new, empty copy when you open the application, but any playlists, song ratings, comments, or other information you created is lost. The iTunes Library file is only used by iTunes.
This file must be in the correct folder. iTunes creates an iTunes Library file even if it is not deleted, only misplaced.

HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

Problem after upgrade to version 3.1

hello,
I have a problem on my application, exactly inside adminitration page. i have a problem in this validation:
declare
llCount number := 0;
begin
for i in 1 .. htmldb_application.g_f03.count
loop
select count(1)
into llCount
from usrm.usr_users t
where t.user_name like lower(htmldb_application.g_f03(i));
if llCount = 0
then
Return false;
end if;
llCount := 0;
end loop;
Return true;
end;
The problem i have when i am trying to update a priviliges for my Apex users. The problem apears when i upgrade from version 3.0 to 3.1. Nothing changed, data are the same, also application.
i think that there is a problem inside the array g_f03(i).
can somebody help me please?
Thanks.
Samm.

hello scott
Ok, i have a page that give a priviliges for users that use APEX. priviliges like power user, full user. atd... The problem happened when i am trying to chages the priviliges. i have all needed grants for updating.
The error is "Error You try to grant not existing user.". but the user exist inside my table usr_users, also inside Apex table flows_030100.wwv_flow_fnd_user.
When i used version 3.0, everything was ok. this happed after upgrade.
Samm,

An unknown error occurred (-42110) when opening itunes after upgrading

when opening itunes i get "an unknown error occurred (-42110) when opening itunes after upgrading to latest version.

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

3GS IPHONE AFTER UPGRADE TO VERSION 6.0 SOME COUNTRY SIM CARD NOT ACTIVATED

why my iphone 3Gs after upgrade to version 6.0 and when i go to china slot in the local sim card it apeal "no sim card" which no problem and can be used before upgraded the software. what should i do to solve this problem.
thanks.

rzulfikar wrote:
Thanks Chris for your solution.
But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
The problem is not about upgrading an iPhone to a newer version of iOS. Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes. You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it. Your choice, your decision, your consequences.

IPhone wont show up in itunes after upgrading to leopard and iLife 08

Hello:
For some reason, my iphone does not show up on my itunes after upgrading my mac to leopard and ilife 08. The phone was syncing properly before the upgrade. I also installed all the patches that were available for downloading but I did not try syncing between the main update and patches. I am running itunes 7.6 and had been running 7.5.1 before that. My iphone is on firmware 1.1.2 and I have it set to manually sync. My ipod video is syncing fine but I had that set to automatic syncing.
I checked the system profile and the usb is showing the iphone just fine.
Can anybody help?

Yup. It does work, had the exact same problem, iPhone showed in system profiler under USB, and iTunes would not recognize, reinstall fixed it all. It almost looks like a permission problem after the reinstall to where some .plist files got wrong settings set, repairing permissions might work too.

Z10 not able to call oversea after upgrade to version 10.1.0.273

I live in Thailand and I usually make call to Malaysia using 009 service from CAT. The full number will be 0096057163xxx and I have been using 009 services for more than 10 years. After upgraded to version 10.1.0.273, I'm not able to make oversea call with 009 services. The reply is "The number you are calling is not in service", I try call with other mobile phones and everything work as per normal. I doubt the the latest version are not able to read and dial the first 2 digits "00". Please help to provide a solutions.

Checked with BB call center Thailand and they have not received similar complain from other customer, no solutions neither. I try making oversea call with 001, 007 and 008 follow by country code, all having the same problem. Especially for 008 follow country code 60 (Malaysia), it ends up calling to China. It seems like the firmware do not recognized the 3rd digit as it read it as 'country code' instead of international call service offer by CAT Thailand. This is really PISS me off and I hope RIM can do something about it!!

Problem launching itunes after upgrade to version 7.

Similar Messages

Maybe you are looking for