Problem Lenovo p70-A Accelerome​ter

I bought lenovo P70-A yesterday and i instal game CarXdrift from play store, the orientation is bit off. how to recalibrate the Accelerometer sensor ?, i tried almost all callibration software in playstore but nothing work.
Thanks Before.
XXXXXXXXX
Moderator comment: Email address removed for member's protection.

i read this on one lenovo p70 forum, which the author solved his problem. below is the step (translated)
1. type  * # * # 3646633 # * # * on dialpad and go to ENGINEER MODE menu
2. go to HARDWARE TESTING 
3. scroll down until you find SENSOR menu
4. select SENSOR CALIBRATION
5. select Gsensor Calibration
6. place your handset on a flat surface and click Do Calibration 
7. wait until  "operation succeed" notification.
8. done. 
hope this will help with the sensor problem

Similar Messages

  • Speaker and Bluetooth Headset Problem on Lenovo P70

    Hello All, I have purchased Lenovo P70 one month ago. This phone is pretty nice for day to day use. But I am facing some peculiar problem as follows: While using any VOIP application like Skype, Viber, Whatsapp, imo (or whatever); if i try to go from earphone to speaker or bluetooth headset mode, I can't hear any sound. The sound nither plays on earphone or on the speaker or bluetooth headset. Even the other party can't here. Even my cheaper Lenovo A329 has no problem doing so. I'm sure this is a software glitch which needs to be fixed. For your information, my build number is P70-A_S129_150320_16g_ROW Kindly let me know if there's any solution.

    Hey JameZ, Thanks for your reply. To be honest with you, I haven't tried the headset which came in box. but surely the speaker mode dosen't work properly in any VOIP application. the sound hangs for about 30-40 seconds and even after the sound comes, it goes again. As for BT headset, kindly see the screenshot below to get better idea. Since the BT headset works fine in normal calls, I'm pretty sure, the problem lies in the OS.  If you have the device around, I would urge you to check for yourself for the problem. I have tried the similar things with my friends P70, the problem remains same. Kindly do the needful

  • Problems with Lenovo P70

    Sorry in the last sentence I ment ... not that easy to fix as those above.
    Phone model: Lenovo P70-A
    Android version: 4.4.4
    Build number: P70-A_S131_150518_16G_ROW

    Hello, after couple of weeks of using this phone I found some really anoing things.
    1) when I lunch the gallery, brightness is changed by itself to the maximum. It's really unpleasant and weird.
    2) Control of dark (turned off) screen. I mean double tap to the screen to unlock device and double tap to the home button to take a picture. It's both a really cool and useful features and I really would like to use them. But on this phone it's unusable. When you guys (lenovo developers) are already using the proximity sensor in this situation for showing the awesome message that the screen is covered. Then why you rather use it for deactivating this two functions when the screen is covered. Because when I wanted to use these functions the phone was taking pictures in my pocked, and was unlocking by itself, so I had to deactivated it. Plus showing the message is just a wasting of baterry.
    3) Smart scenes : could you please add a real minimum for brightness option. I would find it really useful for my night scene, it's much more pleasant for eyes, than dimmer option (5 to 10 percent of brightens I guess).
    I would be really glad if these problems was solved.
    4) also photos and videos quality is not somehow stunishing. Especially slow motion video quality is really bad. But I guess it caused more by photo chip itself than some software issues. So it's not that easy to fix as those below.

  • Compass doesn't work on my new phone Lenovo P70

    I bought yesterday a new phone Lenovo P70 but when I tried to install Compass App it doesn't work and showed me a error message says "Magnetic sensor error. Reset your device! if reset doesn't work, your device doen't have magnetic sensor. No compass app will work on your device. So please confirm if this P70 have a magnetic sensor or not? If not, can you please advise which devises that contains this sensor?

    Help from customer support and a restore fixed the problem.

  • Lenovo P70-A 4G/LTE & Reception Sim Issue

    Phone Information Model: Lenovo P70-AAndroid Version: 4.4.4Build Number: P70-A_S133_150707_16G_ROW Problem Sending Text/Call Reception ProblemSo i just bought this phone yesterday and the time i buy it the android version is 4.4.2 all is well but then i noticed there is an update when i check the system update in settings. so i did it and finish it so it goes to 4.4.4 then the problem comes with it i noticed the reception of my phone is VERY VERY weak suddenly and mostly out of service i haven't experience this of all the lenovo phones i have used from A800 and S890. I couldn't even made a text and call inside of my house im using SIM1 Slot GLOBE and its very dissapointing that i had to go outside just to text hi to my friends which i didnt experience before the photos is taken from the same place also i have tested it with my aunts phone lenovo A536(on the same place) and she is not having this issue signal strength is just the same as the one with 3 bars . P70 is great, the performance ,processing and camera is very satisfying so i hope this issue will be fixed as soon as possible. Thank You  

    Hi, Nate650,
    Sorry to hear about your problem with 4G. First, let me ask, have you updated your Z10 to the latest official software version? I had a similar problem with my Z10. After about an hour on the phone with CS, we figured out it was a problem with the tower near me. The problem was fixed by VZW and I have not had connection issues. You are right, though, about the Z10 falling back to 3G. Mine did before the update but not since.
    Doc

  • Need to Reinstall Cleanup Application in Lenovo P70 as got delete by mistake

    Hi Everyone, Please could anyone suggest, I need to Reinstall Cleanup Application in Lenovo P70 as got delete by mistake. Your help will be highly appreciated

    The installer is available from the Adobe website
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    Download, install then enter your serial number.

  • Lenovo P70's vibration not woking

    Someone can help me?After I updated new software version for S90 and P70. Now both of them could not vibrate. I don't know how to fix it.I tried to contact with Lenovo technical support but I don't know how to contact them via email.So, if someone have solution for this problem, pls help me.Thanks a lot!

    Thank you JameZ!
    But I am using latest version for P70. And the path to configure is not
    correct with this version.
    I took some of pictures and attach it here, so you can see.
    I think there is no wrong configuration on my P70, S90 included.
    Even I've chosen vibrate when touch on.
    I can sure that this function is not working on my both smartphone.
    I hope you can give me another advise to fix this problem.
    Thank you a lot!

  • Soundcard driver problem - Lenovo 3000 N500

    I have a problem with the installation of a suitable driver for the soundcard of a Lenovo 3000 N500 under XP.
    Initially there was no sounddevice displayed at all - After installing windows service-pack 3 the soundcard appeared as -
    "audiogerät auf high-definition audio bus"
    I downloaded and extracted all drivers from here - http://www-307.ibm.com/pc/support/site.wss/quickPath.do?sitestyle=lenovo&quickPathEntry=4233-5FG&ope...
    Additionally installed  "Intel HDMI Audio Driver"
    Still no suitable driver and therefor no soundcard available.
    I saw other posts with similar problems, but the solutions did not help me yet (f.e. Intel HDMI Audio Driver), but maybe instal has to be done in some very certain order.
    I would be very greatful for any help!

    As of today, status unchanged, no drivers available HERE. Unbelievable.
    MOD EDIT - Long URL converted to link to fix break in forum formatting.
    Message Edited by Mark_Lenovo on 11-12-2008 01:29 PM

  • Hard Disk problem - Lenovo G470

    Dear Members,
    Good Day!
    Over the past few days, I have being getting warning messages in Intel Raipd storage technology app that " Disk on Port 0: At risk" 
    I have ran a hardware scan on my Hard disk and have noticed few of the tests getting failed, I  have gone through many of  posts in this fourms and understood that, my HDD is having some problem and it may crash any time.
    I have taken back up of my factory default recovery disks in to DVD's.  However I would like get clarified on  few things related to replacing the existing HDD and setting up windows 7 in my new HDD.
    1) After replacing my OLD HDD , In my new hard disk do I need to create the C disk  with same size as that of OLD HDD for the OKR to work and restore everything properly.
    2)  Will the one key recovery feature  work with my new HDD as well? If not , what should I do make it work?
    3) Will the OEM parition( having factory default backup )be automatically created in new HDD ?
    Please find the Hardware sacn result below from Lenovo solution center.
    Toshiba-TOSHIBAMK6465GSX-11AJC329T
    Display name
    TOSHIBA MK6465GSX - 596.17 GBs
    Type
    INTERNAL_STORAGE_DEVICE
    Model
    TOSHIBA MK6465GSX
    Manufacturer
    Toshiba
    Serial
    11AJC329T
    Firmware
    GJ004E
    Size
    596.17 GBs
    Rotation Rate
    5400 RPM
    Cache
    UNABLE_TO_OBTAIN
    Temperature
    45 C
    Physical Sector Size
    512
    Logical sector size
    512
    Logical sectors
    1250263728
    Supported standards
    ATA8-ACS, ATA7-ATAPI, ATA6-ATAPI, ATA5-ATAPI, ATA4-ATAPI
    Spec version
    VERSION_NOT_REPORTED
    Partition schema
    MBR
    INDEX 1
    PARTITION_TYPE: PRIMARY
    FILESYSTEM: ntfs
    LABEL: UNABLE_TO_OBTAIN
    MOUNT_POINT: UNABLE_TO_OBTAIN
    SERIAL: UNABLE_TO_OBTAIN
    SIZE: 200.00 MBs
    USED: UNABLE_TO_OBTAIN
    FREE: UNABLE_TO_OBTAIN
    INDEX 2
    PARTITION_TYPE: PRIMARY
    FILESYSTEM: ntfs
    LABEL: UNABLE_TO_OBTAIN
    MOUNT_POINT: C:\
    SERIAL: 163D14D6
    SIZE: 137.23 GBs
    USED: 44.75 GBs
    FREE: 92.48 GBs
    INDEX 0
    PARTITION_TYPE: EXTENDED
    SIZE: 443.99 GBs
    INDEX 3
    PARTITION_TYPE: PRIMARY
    FILESYSTEM: UNKNOWN
    LABEL: UNABLE_TO_OBTAIN
    MOUNT_POINT: UNABLE_TO_OBTAIN
    SERIAL: UNABLE_TO_OBTAIN
    SIZE: 14.76 GBs
    USED: UNABLE_TO_OBTAIN
    FREE: UNABLE_TO_OBTAIN
    INDEX 4
    PARTITION_TYPE: LOGICAL
    FILESYSTEM: ntfs
    LABEL: Madhu-Drive
    MOUNT_POINT: D:\
    SERIAL: FEFA510A
    SIZE: 443.99 GBs
    USED: 105.38 GBs
    FREE: 338.61 GBs
    Diagnostics
    SMART status test
    Failed
    Targeted read test
    Failed
    Random seek test
    Passed
    Funnel seek test
    Passed
    SMART short self-test
    Failed
    SMART drive self-test
    Passed
    Processor : Intel core i5- 2410M CPU @ 2.30 GHZ 
    OS :Windows 7 Home premium SP1 , 64 bit
    HDD : TOSHIBA MK6465GSX
    RAM : 8GB
    Kindly let me know , If you need information from my end, Waiting for your suggestions 
    Thanks,
    Madhu,

    Pranay, welcome to the forum,
    it certainly sounds as though you need a new hard drive Hopefully you have already saved all your important files to other media should the drive suddenly totally stop working.
    You can find the support phone numbers on the following site;
    Worldwide Support Center phone list - IdeaCentre, IdeaPad and 3000 G, H, K, Q,
    S, U, and Y Series s...
    For India, 9AM - 9PM Monday to saturday
    English and      1800 3002 9929
    Hindi                 1800 425 9003
    Alternate No:     080-39834100
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • More boot camp problems new 5k imac 3 tera fusion drive

    there seems to be problems with Yosemite and boot camp assistant
    i'm cross posting this to the iMac forum but I spent hours online with apple tech today and none of the several foks I talked to there had even seen a 5k 27" yet and my call back from Cupertino and engineering is no till tomorrow so I thought I should post here too
    MMy bto 5k shipped from China sunday night and arrived in Maine this morning.... Amazing when you think about it for a bto
    iinstallation and set up we're going fine and I started up boot camp assistant to create  a temp boot camp while I wait for my thunder bay 4 box to take the drives for my old Mac pro when boot camp will have a1 tera SSD all to itself....
    so carved off a 700 gig boot camp partition which the assistant formatted fat I then plugged is the lighting to FW adapter in a LaCie 2 tera fw 800 drive to act as a bridge to my LaCie DVD burner which uses the old fw400 cables and inserted my new shrink wrap win 8.1 retail 64 DVD and up comes the win 8 install in very tiny type in a tiny window which got a bit of a laugh out of me.
    And I go through it to the point of selecting that boot camp partition and then said it could not use a fat partition and I should reformat it from the win 8.1 installer which I did and then it said it could not use and unknown partition so I said great and booted back to 10-10 and the boot camp tool to put things back and it said it could not I then went to disk tools and it also said the  3tera fusion could not be either reformatted or put back to a single partition I was on with tech support where I went up through 4 levels of support due to the 5k bto which most had no knowledge of. We tried the optioncommand r to get to DT and the same problem as did going to reinstall from the net which after a 30 min down load could not reformat either it is now kicked to Cupertino with a call back tomorrow
    ( At this point all I want to do is put the computer back in the condition it was in when i started with a plain Yosemite on an unpartitioned 3 tera fusion... Then deal with boot camp when it can have its own drive)
    am betting it will take a Unix comand line to reformat but be aware there may be boot camp issues with my configuration
    and  any help here will be great fully received

    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *121.3 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         121.0 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *3.0 TB     disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:          Apple_CoreStorage                         2.3 TB     disk1s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
       4:          Apple_CoreStorage                         708.1 GB   disk1s4
       5:                 Apple_Boot Boot OS X               134.2 MB   disk1s5
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *2.4 TB     disk2
                                     Logical Volume on disk0s2, disk1s2
                                     B413D0D6-817A-438A-B60A-CAE9B7AC4703
                                     Unencrypted Fusion Drive
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *15.6 GB    disk3
       1:                 DOS_FAT_32 ABOOTCAMP               15.6 GB    disk3s1
    /dev/disk4
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                            IR3_CCSA_X64FRE_EN-... *4.1 GB     disk4
    /dev/disk5
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 TB     disk5
       1:                        EFI EFI                     209.7 MB   disk5s1
       2:       Microsoft Basic Data Union                   500.1 GB   disk5s2
       3:                  Apple_HFS Shimmo                  499.6 GB   disk5s3
       4:                 Apple_Boot Recovery HD             650.0 MB   disk5s4
       5:                  Apple_HFS Orange                  500.1 GB   disk5s5
       6:                  Apple_HFS Newcastle               499.4 GB   disk5s6
    Ls-iMac:~
    and
    diskutil cs list
    CoreStorage logical volume groups (2 found)
    |
    +-- Logical Volume Group 1869B0B4-B850-413D-8726-41934602250B
    |   =========================================================
    |   Name:         Macintosh HD
    |   Status:       Online
    |   Size:         2412498640896 B (2.4 TB)
    |   Free Space:   0 B (0 B)
    |   |
    |   +-< Physical Volume 7F622DCA-6D45-4940-BE17-893BB57CF948
    |   |   ----------------------------------------------------
    |   |   Index:    0
    |   |   Disk:     disk0s2
    |   |   Status:   Online
    |   |   Size:     120988852224 B (121.0 GB)
    |   |
    |   +-< Physical Volume 50B22A72-6463-4CEA-9189-C708884DF658
    |   |   ----------------------------------------------------
    |   |   Index:    1
    |   |   Disk:     disk1s2
    |   |   Status:   Online
    |   |   Size:     2291509788672 B (2.3 TB)
    |   |
    |   +-> Logical Volume Family 9064DC1E-5E23-4887-9B99-46507C4A15AF
    |       ----------------------------------------------------------
    |       Encryption Status:       Unlocked
    |       Encryption Type:         None
    |       Conversion Status:       NoConversion
    |       Conversion Direction:    -none-
    |       Has Encrypted Extents:   No
    |       Fully Secure:            No
    |       Passphrase Required:     No
    |       |
    |       +-> Logical Volume B413D0D6-817A-438A-B60A-CAE9B7AC4703
    |           ---------------------------------------------------
    |           Disk:                  disk2
    |           Status:                Online
    |           Size (Total):          2407000178688 B (2.4 TB)
    |           Conversion Progress:   -none-
    |           Revertible:            No
    |           LV Name:               Macintosh HD
    |           Volume Name:           Macintosh HD
    |           Content Hint:          Apple_HFS
    |
    +-- Logical Volume Group 510FD803-3431-4C23-9BAA-1D1CA0C0B065
        =========================================================
        Name:         Winboot
        Status:       Online
        Size:         708089155584 B (708.1 GB)
        Free Space:   707736829952 B (707.7 GB)
        |
        +-< Physical Volume 033CEB50-621B-474F-9AB0-D4FC410A9718
            Index:    0
            Disk:     disk1s4
            Status:   Online
            Size:     708089155584 B (708.1 GB)
    Ls-iMac:~

  • T500 problems, Lenovo problems

     I just got a new T500.
    First of all the screen is not very bright. It's hard to see in a well lighted room.
    The keys on the keyboard are uneven, as in the left side of the spacebar sticks up in the air.
    The vertical scroll on the trackpad only works well if I make the zone very large.
    Screen goes dim. When on battery power for a while the screen will go very dim and will not respond to any display or power adjustments. If I plug it in, no change. If I power off and reboot, no change. If I let it sit unplugged over night then all is well.
    Today, Dec 28, 2009, I have been on the phone 4 times.
    866-426-7378  had a 15 minute wait just to tell me to call 800-426-7378 technical support for a case number.
    800-426-7378  was supposed to be technical support. The person at the other end of the phone said they are just a call center. Gave me only 2 options, either return it a pay restocking fee and all shipping, or have Lenovo repair the problems. I said I don't want to go back and forth in the mail with a new laptop please let me return it and send another one. "No", was the response.
    866-426-7378  another 15 minute wait, no help, I asked for a supervisor, he got on then disconnected me.
    866-426-7378  again, 30 minute wait, finally got an intelligent helpful person. He contacted a tech friend of his who said the problems were probably, 1 need a new keyboard, 2 new track pad or maybe just driver updates (this is a brand new unit), 3 the screen needs a new backlight and possibly even a complete lcd replacement. 
    So I am sending it back and I will wait to hear from Lenovo.
    WHY DO YOU MAKE IT SO PAINFUL

    Of the drivers you mention I have the following installed:
    - ThinkPad Power Management Driver (6hku06ww)
    - Power Manager (7zu413ww)
    - Lenovo Fingerprint Software UPEK (6hf309ww)
    They appear to work well apart from switching the built in CD player on after a power down. I now have to manually eject and reinsert the CD driver to switch it on.
    On My T400s I only have discreet graphics. The built in drivers for WIn 7 worked but I downloaded Intels Win 7 graphics drivers from their site.
    You might also want to install the UltraNav driver and Utility.
    The drivers seem stable and (mostly) working as they should so I would recommend you install them.
    Mats
    Thinkpad T400s, X61s, X41, 600

  • Wifi problem, Lenovo G560, Broadcom device, cannt find drivers that work in Win 7 32bit.

    Hi, 
    i scoured the internet and you forums for solutions and unfortunatelly nothing helped. 
    My problem is as folows: 
    i did a new clean install of Win 7 Home Proffesional on laptop
    Lenovo G560
    Bios: 29CN34WW
    and after i downloaded all your recommended drivers from your support page i noticed that
    pci network control device was without driver, on further investigation i noticed u dont have an win 7 driver
    for broadcom wifi device.
    PCI\VEN_14E4&DEV_4727&CC_0280
    this is device hd id. 
    i downloaded drivers suggested in other posts: 
    5.100.82.112
    6.20.55.51
    and some other versions. From year 2010 till latest from 2013.
    With every version syptoms are the same - everything looks ok, 
    in device manager i can see the device, it says it works propperly, 
    but i cannt enable the connection. It pops enabling connection and just stops.
    icon remains grey. My tcp connection works fine. 
    when i start troubleshooter it finds an problem, cannt find a solution and gives a message - 
    problem is probably with driver for the device.
    I tried reinstalling  Energy managment, i dont have any other lenovo software.
    ipconfig /all
    i have restarted my laptop like 20x times today from all the installing and uninstaling of drivers,
    and atm i am out of ideas. So if anyone has any new input i would be grateful
    Cheers, 
    Marin
    Solved!
    Go to Solution.

    Forgot to mention, Wireles is enabled in bios, in Energy managment. 
    All indicators regarding blue tooth and Wifi are on. 
    operating system is Win 7 Home premium service pack 1 with all updates installed. 
    Connection by cable and bluetooth are working ok. 
    Cheers, 
    Marin

  • Problema, lenovo vibe x s960 no lee ninguna sim card

    Lenovo Vibe Xs960 que no muestra señal y no lee la tarjeta sim, Hola Miguel le preguntas a juanco2212 pero yo tambien tengo el mismo problema, y el telefono lo compre desde china ????? que `podra originar ese problema

     Hola  , he conseguido hacer que vuelva a recobrar la cobertura, aunque no tengo muy claro como.Os voy a explicar todo lo que he hecho a ver si lo podéis hacer y os funciona.Le he flasheado el Recovery TWRP para S960 , He hecho un BACKUP , con la intención de flashear otra ROM,al acabar el Backup he reinicidado el sistema para poder pasar a la memoria el zip de la ROm para flashearlo y le he instalado  el SUperusiario( ya que antes de reiniciar el sistema te dice si deseas flashearlo) .He reinicido el teléfono, he actualizado Superuser, entonces me ha comenzado a pedir permisos de superuser y todo eso , pero con la grata sorpresa, que aunque ha tardo un poquito, me ha acabado piendo el pin para poder utilizar la SIM.Hasta ahora creo que llevaré como unos 8 o 9 reinicios para comprobar que no vuelva el fallo, y por ahora , todo correcto.Espero que os sirva, y si tenéis alguna duda en el proceso , no dudéis en preguntar. PD: Al darle permiso de super usuario al antivirus que viene por defecto ( Security de Lenovo), pues ha empezado a bloquear  accesos de aplicaciones , por lo que le he quitado el permiso, después de esto , he vuelto a reiniciar y ahora el fallo se volvía a repetir, por lo que he vuelto a conceder todos los permisos de super user al antivirus y entonces he dado acceso a las aplicaciones una a una dentro del entorno del antivirus , en el apartado de vigilancia de privacidad .   Podría deberse el problema a que el Security de Lenovo, por alguna razón , no da permiso para acceder a la Red de la SIM?  Saludos a todos

  • Problema LEnovo A390

    Hola, hace poco, tras dejar de funcionar las llamadas en mi celular, restauré los valores de fábrica y a mitad se me cayó la batería- ya que estaba sin la tapa- tras lo cual al encenderlo aparece el nombre LENOVO y el fondo negro. LEs pido ayuda por favor. Es del modelo A390

    Hola JB1 que tal,
    Puedes intentar subir una nueva ROM para tu modelo, verifica esta web needrom.com busca tu modelo, en tu caso las ROM que funcionara son aquellas en las que se utiliza el flash tools.
    Un saludo.
    @Antony_Vamu
    Comunidad en Español  English Community  Deutsche Community  РусскоязычноеСообщество
    Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

  • Problema lenovo g580

    Buenos dias, mi problema vino cuando se me callo el portatil y se rompio el teclado, bueno romper no lo que pasa es que escribia mas teclas de las que pulsaba. Cuando estaba encendido todo bien lo que paso es que no nos damos cuenta y se nos suspendio dando paso a la pantalla de bloqueo en la cual no podiamos poner la contraseña. Pues un teclado portatil como era de pensar y me ponia que la contraseña era incorrecta asi que pensamos que pido ser un virus pero no estamos seguros. Si alguien puede ayudar seria de agradecer. Gracias de antemano.

    Buen dia,
    al quedarse pegado en el logo de lenovo despues de unos minutos no te arroja un mensaje de error? has encendido el equipo sin el disco duro para verificar que bootea de manera normal hasta que te pide el HDD, intentalo y nos avisas como te va.
    Gracias y Saludos,
    Jorge Montenegro
    Support Specialist
    Comunidad en Español  English Community   Deutsche Community
    Es importante recalcar también que los foros suplementan los recursos de los usuarios de Lenovo pero no reemplazan el servicio técnico oficial. Para un listado de números de servicio sigue el enlace: Numeros de Soporte

Maybe you are looking for