Problem load master data

Hi experts
I am trying to load master data 0MATERIAL ATTR, there is no error when load into PSA but when I did load into IO it shows error as below:
Too many error records - update terminated
Example:
Record 1 :0MATERIAL : Data record 1 ('000000020000000001 '): Version '000000020000000001 ' is not valiad RSDMD 194
Please kindly advice if you have any idea how to fix the problem.
Thanks in advance
Angel

Hi Angel,
There might be a problem in data from source system. Check the tech spec of the info object like type length etc.in BW. then check with the data in PSA.
Hope this will help.
Assign Points if helpful
Regards,
Ramesh

Similar Messages

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Problem in master data loading in BI 7.0

Hi Experts,
I m loading master data in BI 7.0 server.
It is getting failed due to invalid record.
But when i load the same data in 3.5; it is successful.
Can anybody tell me what may be the problem..
Thanks in advance..
Regards,
Ashwin

Hi,
In BI 7.0 we first load data to PSA through Infopacage.Once data comes in PSA table we do transformation between the PSA table which is tied to the datasource and the data target.
Then we load data to the target through DTP.
May be there is some problem in the transformation.Check your mapping in the transformation.
Kindly update me regarding this.
Regards,
Debjani..

Problem while loading Master data load

Hi,
i am loading master data for 0PROJECT. for attributes and text we do have delta.
for text after load added records will be 0 eventhough few records there and they are transferred records. i checked in RSA3 it has records.
can any body tell me the reason for this?
Thanks,
Vijaya

for full load only no of added records are 0 where transferred are 26.
i checked in master data table and all these records already present... may be becoz of that reason if i do full load and delta ...added is 0 only.
am i right in this? plz let me know.
Thanks,
Vijaya

Lock NOT set for: Loading master data attributes error

Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark Siongco

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Error 194 while loading Master Data.

Hi,
I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error:
RSDMD 194
0MATERIAL: Data record 1('0001003') : Version '1009841' is not valid.
I think it's a problem with conversion exit. But I'm not able to solve this problem. It would be of great help if you could guide me on how to overcome this.
Thanks in advance.
Regards
Hari

Hari,
I'm thinking for DB Connected datasources we have Propose Tab Page and Fileds Tab Page. In the Propose tab Page you can see data type and Format(internal or External or check). select external, put data type of your Material Infoobject Data type in the Propose Tab Page.
all the best.
Note: I'm thinking DB Connected Datasources got Propose Tab page. Please correct me if i'm wrong.
Regards,
Nagesh Ganisetti.
*Assign Points if it helps

Error while loading master data from R/3

Hi Friends,
            I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that
Record 1 :No source system ID exists for source system (logical system) RD1CLNT100
In tran structure there are two objects not being populated 0LOGSYS & OSOURCESYSTEM, which might cause the problem.
Pls waiting for your replays
Thanx in advance
Balaji K.

Hi Aswin,
           Thanx for your replay, in that one column is there, "source system id" but it is empty, how to generate that two digit source system id and also there are three kind of tabs like
"Release IDs that are in use" "Suggest Source System IDs" & "Maintain Logical Systems"
         How to use and which one to use, and how to follow step by step to run loads once again by populating "OLOGSYS" & "OSOURCESYSTEM" ?
Pls clarify this problem
Regards.,
Balaji K.

What if i load transaction data without loading master data

Hello experts,
What are the consequences if i load transaction data without loading master data?Are there any other factors except the load performance because of SID generations etc and inconsistencies.
<b>What kind of potential inconsistencies will occur?</b>
Problem here is:
when the transaction load starts a new master data such as employee(x) would be have been created in R/3 which does not exist in BW and hence transaction load fails.
Thanks and Regards
Uma Srinivasa rao

Hi Rao,
In case you load the master data after loading the transcation data and if there is any look up at the master data in teh update rules, then you can delete and reconstruct the requests in the ODS/Cube so that the latest master data is pulled in in the data target.
Make sure you do the Apply hier/attr change before doing the delete and reconstruct.
Bye
Dinesh

Error Caller 70" is missing while loading master data

Hi All,
I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1 data pakage is showing with red color, its update till only PSA .
Please help me out to solving this issue .
Thanks in Advance
Sandhya

Hi,
check the below links
caller 70
Re: Caller 70 error
caller 70
Hope this helps

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

ABAP DUMP while loading master data

hi Gurus,
              I am trying to load master data but I am getting the following dump , I cannot infer anything from the Dump message, I would be grateful if anyone could throw some light on it..
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     11/13/2006 at 13:17:57
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "CL_RSDMD_UPDATE_MASTER_DATA===CP " had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
rror analysis
n exception occurred. This exception is dealt with in more detail below
The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
aught nor passed along using a RAISING clause, in the procedure "_DB_FIRE"
"(METHOD)"
ince the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
he reason for the exception is:
f you use an ABAP/4 Open SQL array insert to insert a record in
he database and that record already exists with the same key,
his results in a termination.
With an ABAP/4 Open SQL single record insert in the same error
ituation, processing does not terminate, but SY-SUBRC is set to 4.)
ow to correct the error
he exception must either be prevented, caught within the procedure "_DB_FIR
(METHOD)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
se an ABAP/4 Open SQL array insert only if you are sure that none of
he records passed already exists in the database.
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
APSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
L_RSDMD_UPDATE_MASTER_DATA===CP " or "CL_RSDMD_UPDATE_MASTER_DATA===CM00Y "
DB_FIRE"

one of the response says " In the infopackage set processing as 'Only PSA' and tick the checkboxes for 'Update subsequently in data targets' and 'delete duplicate records'.then try to reload."
I do not find the Delete duplicate records check box in the IP...cananyonepls tell me where to find thid check box?
thanks

Issue while loading Master Data through Process Chain in Production

Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
Bhanumathi

Hi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan

Error 0 update while loading master data

Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.

I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan

Load Master Data to BPC from a file in BW server

Hi all,
the problem is the next one. We have create some files in Bw with APD. We left those files in a carpet in the Bw server. We want to load those files in BPC. Anyone can explain how we can upload those files?
Thanks for the help.
Gorka.

Hi Gorka,
Please find the link for the document, which explains you "Loading Master data from BW to BPC"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827?quicklink=index&overridelayout=true
I hope this may help you.
Raghu B.S.

Load is failing when trying to load Master data

HI When i am trying to load Master data, i am getting the below message for all the records, can some one let me know what am i doing wrong in here.
Below is the message i am able to see in PSA.
InfoObject /BIC/ZCONTPSTC does not contain alpa-Conforming value 80222 RSAR 196
Thank You,
Kris.

From
Re: Alpha Conversion Problem
"- go to transfer rule (info source)
- check the flag for optional Alpha conversion (you should it on the left-hand side, at the very end "conversion")
you will see the data will be loaded with any trouble afterwards, because the system will do the conversion for you "
OSS note 598691 describes this behavior.

Problem load master data

Similar Messages

Maybe you are looking for