Problem loading an email from message list

When I click to open an email from the list (Inbox, Sent, etc.), I get: "There appears to be a problem loading the email "xxx". Retry". When I click on Retry, I get: "An unexpected problem has occurred. Performing your action again in a few moments will probably solve the problem. If it persists, we suggest you close this window and re-launch Yahoo! Mail." It does persist, but re-launching does not help. Please help me. Thanks.

This is because the SMTP server you have configured does not permit connections from off the ISP's network. When you are connecting via EDGE this is off-network from the perspective of the ISP.
Here are some hints from Apple on this problem:
http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2637.html
You didn't say who your ISP is, but here are some common settings ISPs in various countries:
http://docs.info.apple.com/article.html?artnum=306990
As a last resort in the US you can set the outgoing SMTP server to cwmx.com:25 with no user ID or password. This will work on EDGE only, not on WiFi.

Similar Messages

I want to load my emails from an old mac to a newer imac? How is this done?

I want to load my emails from an old G5 mac to a newer I-mac? How is this done?

Are you positive the old iMac is a G5, please click about this Mac and tell us what CPU it has.
This article will help you get started https://discussions.apple.com/docs/DOC-2295

Problem in Sending email from Reports Queue Manager

Hi
I am getting problem in sending email from reports queue manager.
It says that error in logging to mail server.
If any body knows the sol then pl help me out.
thanks

Hi
I am getting problem in sending email from reports queue manager.
It says that error in logging to mail server.
If any body knows the sol then pl help me out.
thanks

Problems loading RAW files from Canon 6D in Elements 10

Elements 10 - Windows: I have been using the software for a couple of years and never had a problem loading RAW files from my Canon T2i ir 60D, however I just purchased a Canon 6D and when I try to load a RAW from the 6D I get Cannot open 'C:\User...CR2' because it is the wrong type of file. I thought cameraraw 6.5 patch would be the fix but when trying to install I get "Error loading Updater workflow"

Will the DNG files perform the same, meaning will I retain all the information that makes RAW important for processing?
Yes. That's why DNGs were invented. Adobe has put a lot of work into the DNG format for this very reason.
Raw files are proprietary and manufacturer specific. Raw formats change with every make and model of camera. Software must be updated for the new Raw format of every single camera. Adobe does an admirable job of upgrading Camera Raw for every new camera.
DNG is also a Raw format but it's open source and works in any software which can read the DNG format. If camera manufacturers used the DNG format instead of their own Raw format, you would not have to upgrade Elements 10. But they don't, and probably never will, so you must upgrade the Camera Raw plugin (and therefore Elements 10 since it's not compatible with the new Camera Raw) to read the new Raw format from the 6D or add another step to your workflow with conversion to DNG first.
See
http://photographylife.com/dng-vs-raw
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Problems loading raw files from Nikon D750 to lightroom4

problems loading raw files from Nikon D750 to lightroom4. Any thoughts?

This is a recently produced model so raw support was only added in LR 5.7 / ACR 8.7, updates to LR 4 ceased about two years ago when LR 5 was issued.
Options a.) Upgrade to LR 5.
b.) Utilize the latest Adobe DNG Converter 8.8 to convert the nef files to dng format then you will be able to import the dng files into LR 4.

Safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Just got a new iphone 4s and it will not load yahoo emails. gives message of the connection to the server failed

new iphone 4s will not load yahoo emails, gives message of the connection to the server failed

Perhaps you should use this iPhone email setup assistant to re-enter your Yahoo account settings. If you do that, simply go to Settings > Mail, Contacts, Calendars and delete your current Yahoo account, then use the assistant to re-establish it.
iPhone Email Setup

Emails from another list are automatically deferred from Mailing list

I have several mailing lists setup on on a server. Most emails go through the listhost without any problems. Posts should be configured to automatically go through for all posters.
Some of these mailing lists are part of other mailing lists. If one sends an email to a mailing list, of which the server's mailing list is a member, the email will be deferred. The reason cited for deferring the email is "message has implicit destination." I have tried adding the original posters to automatically post all messages from this poster but that does not fix the problem.
I would prefer not to have any delays or waits for approval of such messages. How does one change this setting?
Thanks!
Julia

Hi ,
Check the city LOV with hardcoded value first.
Ex : select city_name from cities where country_name = 'India';
Go with below query
select city_name from cities where country_name = ':P_COUNTRY';
Also select refersh on other parameter selection in the parameter.
Thanks,
Ananth

Problem with sending email from 4.6C to MS-outlook / Exchange

Hello,
I'm trying to send an email with a pdf-attachment from my 46C system. In trans SOST everything looks fine. There is a document with an attachment. When I send it to my email-client there's no attachment. And the following message is given in my email:
This message is in MIME format. Your mail reader does not support MIME. Please read the first section, which is plain text, and ignore the rest. Better yet, get a MIME-capable mail reader.
Does anybody recognise this message ???
Regards,
GJ van Holland

Hai G.J.Van
Check the following Code
DATA: OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST   LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA L_NUM(3).
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
Mail Contents
OBJTXT = 'Object text'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT ITAB_DATA.
    CONCATENATE ITAB_DATA-PRODUCTOR
                ITAB_DATA-VBELN
                ITAB_DATA-POSNR
                ITAB_DATA-MATNR INTO OBJBIN.
    APPEND OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'ORDERS'.
APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'TXT'.
OBJPACK-OBJ_NAME   = 'WEBSITE'.
OBJPACK-OBJ_DESCR = 'ORDERS.TXT'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
target recipent
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
copy recipents
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY     = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_CHNG
       TABLES
            PACKING_LIST               = OBJPACK
            OBJECT_HEADER              = OBJHEAD
            CONTENTS_BIN               = OBJBIN
            CONTENTS_TXT               = OBJTXT
            RECEIVERS                  = RECLIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
Thanks & regards
Sreenivasulu P

Problem with Print Email from Web IC

Hello Experts,
I am currently working on CRM 6.0. When i try to print an EMail from Web IC using Print Message Button at the bottom of Email body, I can only find this email in spool rather than printing on printer.
Also I have assigned the printer to my user. Even though `m not able to get the print of the email using Print Message Button. Please Advice.
Thank you.

I have a same problem. I've turned on print immediately, but it still prints E-mails to spool and not to printer. Printing from GUI works ok. Do you have any other advice?
Best regards,
Duško Šorak

I have problem send any email from iPad2

I have a very weird situation.
I had this iPad2 for a few months and was able to receive and send email using 3 email accounts, from gmail, yahoo and hotmail without any problem.
Howeverm after I came back from a trip, I could only receive email, but cannot send any email from any of these accounts at all!
I am using WIFI. I have deleted all email accounts, turned off the ipad2, and started over a couple of times.
I tried to recreate these account again one by one. After added one account, I tested it only to see no email can be sent!
THere is no error message, no any information. All I know is the email I sent from my iPad disappeared!
Any one here can help?
Thanks!

Disabling email scanning didn't fix it. I can open the Mozilla email client and it immediately tries to connect to the inbound AT&T mail server but then just sits there with no response. If I try to send a message same thing, tries to connect to outbound AT&T server but nothing. One of the options in the support doc said to remove the saved passwords and when the client restarts it will ask you to save your password again. The client never makes a connection to the server so it never has a chance to authenticate. Its almost like AT&T disabled their POP server.

Problems with send emails from 2nd account

Hi,
I have problems to sent from a 2nd account. Sending emial via my icloud account works excellent. But if I want to sent emails via my 2nd account I got the message
" Can't sent emails - Adresse [email protected] was declied from server, because forward is not allowed"
I heard that the server has to setup to allow forwrding emails from a 2nd account. Where could I find this?
Thnaks
Michael

I believe CF5 had an issue with 0 byte mails in the spool.
Test your mail to confirm that you do not attempt to send a 0 byte
mail.

Problem while storing items from trailing list to database

hi all,
can anyone help me out. i have scenario where i have to store items from trailing list into database. suppose if there are 3 items in the list, 3 rows should be inserted into database with all the remaining fields same like
A ,1 , c
A, 2, c
A , 3, c where 1,2,3 are items from trailing list. Am iterating the loop.
What am doing is before saving am checking for duplicates i.e are there any records with the same combination. If yes am doing nothing else am committing the changes..
As am not doing anything if any duplicte record is present, the changes made to the fields persists and once if any commit happens all the values are getting saved. which is voilating my condition..
Thanks

Hello,
Direct path load, can only be used with SQL*Loader and Database have the same version.
Care to tell the database version and sql*loader version you are using.
-Sri

Attachment Name of emails from Message Tracking Logs

Hi,
I have been able to get NDR from message tracking logs in Exchange 2010 using Exchange Management Shell. Is it possible to include the file name of the attactment of the emails from the report generated?
Regards,
Emansky
All the best, Eman Lacuata

Hi,
No that is not possible.
Message tracking will never include names of attachments.
Martina Miskovic - http://www.nic2012.com/
Agree.
Refer to:
Managing Message Tracking
http://technet.microsoft.com/en-us/library/bb124375(EXCHG.80).aspx
Note: Content specific to Exchange 2010 SP1 will be available at a later date.
Best Regards Fiona Liao E: [email protected]

Problem loading modified classes from CLASSPATH using system class loader

Hi,
I am facing problem to load the modified classes from CLASSPATH.
I have set my CLASSPATH to a directory whose classes will be modified frequently. After the server(web/app) is started, the system class loader, using which am trying to load the classes from the directory where the CLASSPATH is set, am not able to load the modified files without the server restart.
Do I need to have a custom class loader to fix this.
Please help me.
Thanks,
Sureddy

Do I need to have a custom class loader to fix this.Yes.

Problem loading an email from message list

Similar Messages

Maybe you are looking for