Problem loading CS2 with Version 5 not 5.5

When I try to load CS2 the computer says it can't find a copy of 5.5. I only have 5.0. Is there a work around or do I need to buy a copy of 5.5? Thanks, Lou

Lou,
I'm sorry we can't provide you an answer on this forum. This forum is specific to issues and discussions related to the Adobe License Manager (ALM).
Please contact Adobe Technical Support at (800)642-3623. They will be able to help you with your question.

Similar Messages

TS3212 Is anyone else having problems loading the newest version of iTunes (10.6.3) on Windows?

Is anyone having problems loading the newest version of iTunes (10.6.3) using Windows Vista? My current iTunes program version 10.6.1 keeps telling me there is an update but when I try to load it the information box goes away and nothing happens. I have tried downloading the new version from Apple web site but it brings up a warning screen of " iTunes setup.exe is not commonly downloaded and could harm your computer." I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application." What Gives?

I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application."
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Problem loading page windows - Version 3.6.13 is this a virus?

When using Firefox I go to my home page when it opens but each time I try to open a new page multiple windows pop up with an error message:
Problem Loading Page
Firefox can't find the file at /C:/Program Files/Mozilla Firefox/9Úº%01˜%1Cm:ÙËÅÈµ®Ö¯AÐóqÖ¬7F±éS¿W5
I'm not sure if this is a virus, it happened when my son had been using my computer. I DO use anti virus software - Trend Micro PCCillin
It is so annoying, I've tried a number of fixes but nothing seems to help. Can you advise me on what to do?
Thanks,
Cassy

When using Firefox I go to my home page when it opens but each time I try to open a new page multiple windows pop up with an error message:
Problem Loading Page
Firefox can't find the file at /C:/Program Files/Mozilla Firefox/9Úº%01˜%1Cm:ÙËÅÈµ®Ö¯AÐóqÖ¬7F±éS¿W5
I'm not sure if this is a virus, it happened when my son had been using my computer. I DO use anti virus software - Trend Micro PCCillin
It is so annoying, I've tried a number of fixes but nothing seems to help. Can you advise me on what to do?
Thanks,
Cassy

Content Browser (0BCT_CB_1) load fails with conversation id not found error

Hi,
I am suddenly experiencing a problem with loading data to the content browser cube using infosource 0BCT_CB_1. The load fails with an error saying: "Conversation 76635612 not found / CPIC-CALL: 'ThSA". Does anybody know how to solve this?

Hi,
Were you able to get this fixed?
I am getting same issue while loading to BI 7.0 technical content.
Thanks
SA

Substitution problem in VO with viewlink and not in expert mode

Hi All
i have to extend a VO ,standar VO is not in expert mode so i made it and then extended the VO(need to add two new date columns) and substituted the BC4j ,i was involved in this discussion also
Re: Substitute ViewObject. Urgent!!!!! Thank you
,and i was aware that viewlinks should take care by substituion itself ,but in my case it is creating problem ,first it has thrown the error given below
oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value PoRequisitionLinesVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
then i modified the VOExRowImpl and added the viewlink setter getter from seede Rowimpl ,now it it not throwing the InvalidParamException ,but throwin OAAttrValException saying get method for LineNum is not resolved ,now i m puzzeled what is going on ,i m sure i have not made any mistake in substitution, any clue would be very helpful for me ,please throw some light on this issue
thanx
Pratap

thanx kumar, nice to see your reply.
basic requirement is i have to create two date fileds on the requsition line form ,it shud appear on the basis of selected value in a field of same row ,so i set PPR ,initially i bounded these fields with spared attributes of VO but it was creating problem after page refresh ,i have raised the issue in the forum
Date value format is changed itself after page refresh
raised a tar with oracle ,issue was that these attributes are varchar type and used for the date fields, thats y creating the problem after page refresh ,VO extension didnt work bcz these attributes are already there in seeded VO with there data type, so they can not be changed in VO extension,oracle suggested create two columns with date type in the seeded table itself and use them in VO extension , i did it ,now the problem is
i have extended the VO ,and this problem came ,one thing i m not sure is
since i have added two new columns ,shud i do EO extension (i did it ) and then VO extension ,if yes then how bcz when i will move all the files from server they are all standard files and ,extended VO is getting the reference of seeded VO which is using the seeded EO not the extended EO .
so what approch or steps shuld i follow to add this newly added column in VO .
thanx
Pratap

Problem loading CS2 disks

Trying to load CS2 onto Win 7 machine. PC gets through disk 1 fine (takes about 20 minutes). The PC cannot read disk 2. Physical disk looks to be in perfect condition. What to do?

Forget the discs.
They won't work anyway since they contain a copy of the software which requires activation - and Adobe shut down the CS2 activation server a couple years ago. So your CS2 serial number will never successfully activate the software again.
Download a copy of the non-activated CS2 from Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Install then enter the new non-activation serial number provided at that link. Your existing serial number will no longer work.

URGENT: Problems Loading files with SQL Loader into a BLOB column

Hi friends,
I read a lot about how to load files into blob columns, but I found errors that I can't solve.
I've read several notes in these forums, ine of them:
sql loader: loading external file into blob
and tried the solutions but without good results.
Here are some of my tests:
With this .ctl:
LOAD DATA
INFILE *
INTO TABLE mytable
REPLACE
FIELDS TERMINATED BY ','
number1 INTEGER EXTERNAL,
cad1 CHAR(250),
image1 LOBFILE(cad1) TERMINATED BY EOF
BEGINDATA
1153,/opt/oracle/appl/myapp/1.0.0/img/1153.JPG,
the error when I execute sqlldr is:
SQL*Loader-350: Syntax error at line 9.
Expecting "," or ")", found "LOBFILE".
image1 LOBFILE(cad1) TERMINATED BY EOF
^
What problem exists with LOBFILE ??
(mytable of course has number1 as a NUMBER, cad1 as VARCHAR2(250) and image1 as BLOB
I tried too with :
LOAD DATA
INFILE sample.dat
INTO TABLE mytable
FIELDS TERMINATED BY ','
(cad1 CHAR(3),
cad2 FILLER CHAR(30),
image1 BFILE(CONSTANT "/opt/oracle/appl/myapp/1.0.0/img/", cad2))
sample.dat is:
1153,1153.JPEG,
and error is:
SQL*Loader-350: Syntax error at line 6.
Expecting "," or ")", found "FILLER".
cad2 FILLER CHAR(30),
^
I tried too with a procedure, but without results...
Any idea about this error messages?
Thanks a lot.
Jose L.

> So you think that if one person put an "urgent" in the subject is screwing the problems of
other people?
Absolutely. As you are telling them "My posting is more important than yours and deserve faster attention and resolution than yours!".
So what could a typical response be? Someone telling you that his posting is more important by using the phrase "VERY URGENT!". And the next poster may decide that, no, his problem is evern more import - and use "EXTREMELY URGENT!!" as the subject. And the next one then raises the stakes by claiming his problem is "CODE RED! CRITICAL. DEFCON 4. URGENT!!!!".
Stupid, isn't it? As stupid as your instance that there is nothing wrong with your pitiful clamoring for attention to your problem by saying it is urgent.
What does the RFC's say about a meaningful title/subject in a public forum? I trust that you know what a RFC is? After all, you claim to have used public forums on the Internet for some years now..
The RFC on "public forums" is called The Usenet Article Format. This is what it has to say about the SUBJECT of a public posting:
=
The "Subject" line (formerly "Title") tells what the message is about. It should be suggestive enough of the contents of the message to enable a reader to make a decision whether to read the message based on the subject alone. If the message is submitted in response to another message (e.g., is a follow-up) the default subject should begin with the four characters "Re: ", and the "References" line is required. For follow-ups, the use of the "Summary" line is encouraged.
=
([url http://www.cs.tut.fi/~jkorpela/rfc/1036.html]RFC 1036, the Usenet article format)
Or how about [url http://www.cs.tut.fi/~jkorpela/usenet/dont.html]The seven don'ts of Usenet?
Point 7 of the Don'ts:
Don't try to catch attention by typing something foolish like "PLEASE HELP ME!!!! URGENT!!! I NEED YOUR HELP!!!" into the Subject line. Instead, type something informative (using normal mixed case!) that describes the subject matter.
Please tell me that you are not too thick to understand the basic principles of netiquette, or to argue with the RFCs that governs the very fabric of the Internet.
As for when I have an "urgent" problem? In my "real" work? I take it up with Oracle Support on Metalink by filing an iTAR/SR. As any non-idiot should do with a real-life Oracle crisis problem.
I do not barge into a public forum like you do, jump up and down, and demand quick attention by claiming that my problem is more important and more urgent and more deserving of attention that other people's problem in the very same forum.

Problem loading data with DTP

Hi everyone,
I trying to load data from a DSO to a INFOCUBE, the problem is as follow. Normally in a DTP the system process packages in the request. In this case the DTP don't proccess any package but finish with status green.
When I manage the target, I see that the request finish in red.
The symptom is that the DTP don't process any request. I don´t know why.
Status: The DSO have active data, and the infocube is empty.
I don't know what happen, but I've not carry the data from the DSO to the target.
I hope that you help me,
Regards.
Jose

Answering your questions:
Are you seeing the request red in Manage and Green in Monitor Details ?
Yes in manage I see the requests in red, but in the monitor details all is in green, although there are not requests processed in the monitor details..
Are the requests green and active in the source DSO ?
Ok, this DSO is direct input, an it's filled by a APD process. So the DSO don't have active request. This DSO Just have the data in table of active data. I think that it doesn't matter because I'm trying to do the same thing between two infocubes and doesn't work too.
I'm looking that the problem y general for all warehouse.
Additional, this DTP works correct the last week.
This week begins to fail.
Could be a System problem.
What can I check??
Also check if this is an auth issue - SU53 ..
I check SU53 but all it's ok.
In Monitor Header - Selections - You should see the requests which have been loaded from source.
I don't see anything in this field.
Thanks
Jose

Problem loading AVI with vision

I started building a gait analysis program, and got stuck with the following. Whenever I load AVI files into labview (using IMAQ AVI READ FRAME) it displays about a dozen frames, then I get Error 1074395975: IMAQ Vision: DirectX has timed out reading or writing the AVI file. When closing an AVI file, try adding an additional delay. When reading an AVI file, try reducing CPU and disk load. This happens even with the READ AVI EXAMPLE program that came with the vision package. Since LV is the only application, running on a i7, I am pretty sure this is no load problem. I tried changing the avi compressor, and the resolution, without success. Any ideas?
Attachments:
example.avi ‏2386 KB

These are the CPU and Disk loads while running the AVI (until it crashes, that's about a second of movie play).
I'll try the activeX example, and see where it gets.
Thanks.
Attachments:
cpu_load.png ‏267 KB
disk_load.png ‏233 KB

Camera raw update problem loaded on cs6 32bit but not the default 64bit.

Hi to all.
Can you help? I recently updated to 8.8 camera raw after buying a new camera and there was a problem with the installation. It told me that there was a problem writing to cs6. I clicked ignore an the installation completed. The problem is that it has updated to the 32bit version but still shows 7.1 on the 64bit (default). I am running on windows 7 64 bit. Any hel[p with a solution would be appreciated.
Thanks
Update
I did a bit more research on the forum and found a discussion referring to pse which gave instruction to open the archive on the camera raw exe. file and manually copy the 8bi files into the correct location in the C drive eg:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS6\File Formats
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CC\File Formats and
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
C:\Program Files\Common Files\Adobe\Plug-Ins\CS6\File Formats
Wait for it this didn't work and completely removed camera raw from the about plugin menu on ps6 64 bit. It worked on cs6 32 bit.
The solution was to then reinstall the plugin via the installation .exe file and all was back as it should be. The only problen now is that adobe bridge has the camera raw preferences greyed out.....I am working on a fix for this and will post if I find it. I hope this helps someone.

Hi Michelle
I am new to the forum so I apologise. I should have mentioned in my update that the installer that fixed the problem was the ACR 9.0. I had originally used the 8.8 installer which caused the problem from ACR 7.1.
Initially the installer didn't work 64 bit version still had 7.1 but it installed ACR 9.0 on the 32 bit. I then proceeded to manually unzip the exe file ACR 9.0 and coped the 8bi file to the locations stated in my update. This didn't affect the 32 bit cs6 but completely removed ACR from the 64 bit. I re ran the ACR 9.0.exe file and everything was fixed.
I hope that this makes sense. I have now developed a problem on Bridge though. I can open raw file in photoshop but I can't view previews and the camera raw preferences are greyed out. I have read elsewhere that other people have had the same problem.

"problem loading"; "unable to connect"; "server not found" - ??

Been using Firefox 6 years with DSl. Recently have gotten nothing but the above messages - can't open any pages! Got a new DSL modem, re-downloaded Firefox and still can't open any pages - not even mozilla.com or google or cnn.
Rebooted, restarted, etc.
Even tried to download Chrome, but it failed - and I couldn't find out why because the "tell me why" defaulted to Firefox.
... really no fan of IE ...

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.
Another possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Problem loading cs2 on my 10.5.8 but cs1 runs just fine...help?

I have an older G5 tower that is running 10.5.8 and have had photoshop cs2 on it since about 2006 and friend gave me a copy of Adobe Creative Suite standard and CS2 premium upgrade. I figured I needed to uninstall photoshop so I did and then I finished installing everything I can't load any cs2 programs, the cs1 programs load fine so this is where I am asking for help. how can I get the cs2 versions to load?

Here is what the warning said
"The installer has detected an installation on Version Cue 1.0 on your computer. Please see the user documentation for information about running Version Cue 1.0 and Version Cue CS2 simultaneously, as well as how to migrate projects from Version Cue 1.0 to Vesrion Cue CS2"
so far that was all I came across.

Problem Loading swf with MCL class

Hey, I am relatively new to actionscripting and am having a
bear of a time trying to figure out why this won't
load.....basically i am trying to use the movieClipLoader class to
call up a swf..... so basic i know..This is my script
any help here?

does container exit on the timeline that contains your code?
is master.swf in the same directory with your flash swf and
html?

I.E./Active X problem loading movie with multiple .swf

I have a webpage that loads .swf's into a main "container"
swf, and I've found a fix for the I.E./Active X (this is a good
bookmark:
http://www.kirupa.com/developer/flash8/flash_fix.htm
). But the container seems to get stuck on the preloader now? Any
ideas?
PROBLEM PAGE HERE
WORKING PAGE HERE

FRAME 1:
System.useCodepage = true;
main="";
pageNum=1;
if (_framesloaded > 50){
//if (_framesloaded == _totalframes){
gotoAndStop (8);
} else {
gotoAndPlay(1);
FRAME 7:
gotoAndPlay(1);
FRAME 8:
if (whichFrame == "return"){
gotoAndStop (20);
less6.gotoAndStop(2);
} else {
gotoAndStop("splash");
FRAME 20:
if (_framesloaded == _totalframes){
gotoAndStop ("p14");
} else {
gotoAndPlay(10);
}

Create a script to update, deploy, load data with version 9.3.1

Hi,
I'd like to know if it's possible run a script to execute:
- Import dimensions by profile (by EPMA)
- deploy an application (by EPMA)
- load rule to load data (by essbase)
- Calculation script (by essbase)
we are using the version 9.3.1
Thanks in advanced.
Roby

Hi,
I don't believe there any batch command functionality for EPMA until version 11.
It is possible you can try and create a scheduled taskflow in EPMA to import a dimension and then reploy, finally you could get it run a batch script which contained a maxl script to load and calculate essbase data.
Cheers
John
http://john-goodwin.blogspot.com/

Problem loading CS2 with Version 5 not 5.5

Similar Messages

Maybe you are looking for