Problem loading Ellen Podcast with 5G ipod

I have a thirty gig Ipod video (the first release) and itunes says i cannot sync the ellen podcast because my ipod is not compatiable... What is the deal???

I have the same problem with my fifth generation 80 GB iPod. I called Apple and they said that they cannot help with any specific podcasts because they are not responsible for how the podcasts are made. I expressed my surprise with this statement as the Ellen show is a featured show in the Apple Store Podcast section, but it does make sense. They can't be responsible for every podcast in their directory.
You could try contacting the Ellen show and letting them know. I'm sure they'd fix it if they knew it was affecting a lot of people.
PowerMac Dual 1.42 GHz G4 Mac OS X (10.4.7)

Similar Messages

Load multiple podcasts to your iPod?

Does anyone know how to load multiple podcasts to their iPod? I assumed iTunes would push my entire podcast library to my iPod, but it didn't - only 1-3 episodes appear per podcast feed, and not even necessarily the most recent ones (and it failed to grab one podcast feed at all). In any case, I'd really like to have all podcasts available to choose from - is there some setting I can change to tell iTunes to transfer them all? (memory is not yet an issue)
Also, memo to the apple designers: a dedicated podcast menu on the iPod would be really nice. I'm surprised there isn't one already, actually, given how much the iPod menus mimic iTunes
Mac OS X (10.4.10) iPod nano recent model

uh ... explore the MAIN MENU option under SETTINGS on your ipod. it lets you select what you want on the main menu screen.
Since you haven't managed to find that setting on your own, you might find it interesting that there are lots of settings in ITUNES that control what podcasts are transfered to your iPod. Plug your iPod into your computer, select it in iTunes, and go do the PODCASTS tab. Poke around in there for a bit - I think you'll find what you're looking for.

Having problem loading Aol mail with Firefox ver 4. Keep getting error 8 msg. Any ideas?.

INstalled Firefox 4 and now cannot laod the aol mail website. I can use ms explore with no problem. Get error msg 8 Problem loading application. AOL itself loads fine, just not mail.

INstalled Firefox 4 and now cannot laod the aol mail website. I can use ms explore with no problem. Get error msg 8 Problem loading application. AOL itself loads fine, just not mail.

ITunes no longer syncs partially listened-to podcasts with my iPod

Hey, everyone. Since I downloaded the new iTunes 11, I've run into a problem with the podcasts I listen to. I subscribe to a bunch of podcasts, many of which are quite lengthy. For that reason, I often can't listen to the whole podcast in a single day. However, with the new iTunes, if I sync up my iPod while partway through a podcast, the iPod loses the partially listen-to podcast. It's as if the software assumes that since I've listened to part of it, I don't want it to sync anymore.
This is, of course, not the case. Is there a setting somewhere that I can toggle to make iTunes give me ALL my podcasts, regardless of whether I've listened to part of them (or even all all of them)? In short, I want my podcasts folder in iTunes to match what's on my iPod, not have iTunes make guesses about what I'll want.
Thanks for any help!

OK, figured this out and wanted to post the solution in case anyone else experiences this.
When you plug in your iPod, iTunes should start up automatically and sync. A button, "iPod," should appear at the top of the iTunes player, just below the search window. Click it (but not the eject symbol on it).
This brings up the iPod control settings. Along the top menu, there will be several submenu options: "Summary," "Music," "Movies," "TV Shows," "Podcasts," etc. Clock "Podcasts."
Here there will be a radio button next to "Sync Podcasts." Make sure that is checked. There is also a radio button next to "Automatically include..." Click that to on as well. Then, if you want iTunes to STOP deleting partially listened-to podcasts, make sure the options in the two drop-down menus say "all" and "all podcasts." Thus, you'll end up with: "Automatically include all episodes of all podcasts."
Hope this helps. The new iTunes is far from user-friendly.

Problem loading Image data with French accent in file name

We have a very complex commercial application that has been working perfectly in English for over a year. We have now localized it to French and Spanish, and discovered a serious show-stopping problem. We need help fast, with the scheduled release being less than 2 weeks away...!
We iterate over a folder to find all the images in it, then display those in a user window. The code for loading the images is:
            for each (var name:String in filenames){
                var image:SmoothImageTransformable = new SmoothImageTransformable();
                var imagePath:String = dir + "/" + name;
                image.source = imagePath;
                trace("Adding Item to picture carousel with url " + image.source);
                image.data = {directory:dir, filename:name};
                image.isDragEnabled = true;
                image.setStyle("horizontalCenter", 0);
                image.setStyle("verticalCenter", 0);
                _images.push(image);
Our SmoothImageTransformable class is an internal class that inherits from Image. This all works fine for image names like 'myFavoritePhoto', 'test', 'photo346', etc. However, it fails to load the data if the file name is something like 'caméra' Any name with a UTF-8 character causes the data load to fail.
To be sure we weren't doing a load somewhere else in the code that I had overlooked, I added a "image.autoLoad = false' line in there. That did exactly as expected -- all image squares then show a grey blank, with no image shown. Removing that line (reverting to the original code, as shown above) causes all the images to work perfectly, except for those with French accent characters like the é.
HELP! Is this a known bug? Is there some additional setting I need to make it understand the extended character set? I can't find any mention about this at all in the documentation.

@markerline:
We have a fix! Almost... I don't understand one aspect of what I am seeing though.
We have one test file named "camèra.jpg" that is an example of what I am unable to load into an Image. I decided to examine the character codes at each letter, and this is what Flex has as the string:
name = cam?ra.jpg
   [0] = c; 0x99
   [1] = a; 0x97
   [2] = m; 0x109
   [3] = ?; 0x232
   [4] = r; 0x114
   [5] = a; 0x97
   [6] = .; 0x46
   [7] = j; 0x106
   [8] = p; 0x112
   [9] = g; 0x103
Note that the è prints as gibberish in the trace statement, and shows a numeric encoding of 0x232. According to
     http://docstore.mik.ua/orelly/web2/action/appb_01.htm
The unicode equivalent of Latin1 for è is 0xE8, which is equivalent to 0x232. That implies that the string is already Latin1, which I would think would mean that Windoze would recognize the file name and open it properly -- but it does not.
I then tried taking the "camèra.jpg" string, pasting it into NotePad++ in a UTF8 document, then telling NotePad++ to display as ASCII. The result is "camÃ¨ra". I then tried just forcing the file name within Flex to this new mangled string. The result then is:
MAGIC name = camèra
   [0] = c; 0x99
   [1] = a; 0x97
   [2] = m; 0x109
   [3] = ?; 0x195
   [4] = ?; 0x168
   [5] = r; 0x114
   [6] = a; 0x97
   [7] = .; 0x46
   [8] = j; 0x106
   [9] = p; 0x112
[10] = g; 0x103
Note this time the trace statement looks proper. More important, the IMAGE DOES LOAD! (Our display of the name to the user now looks like crap, but that just means I need to modify our class to have a separate 'name' property, rather than extracting it from the 'image.source')
So... my remaining question -- what encoding did I just do through that NotePad++ incantation? That site I quoted above said that it was already Latin1, which is what I thought I was trying to get to. I clearly need to write a method to map from incoming (UTF8 I thought, but maybe Latin1?) to Windows file system (Latin1 I thought, but maybe ASCII).
In other words, I am not sure what charcter set to come from or go to... It turns out the code was already in the character set I had been trying to go to (which is why it wasn't working) and the set I seem to need to go to is not the one I thought...

Anyone have problems loading the forums with Chrome ?

Since 2 weeks I am having problems in chrome ( don't load sections etc ), if I access with FF all works ok, but with chrome and safari is imposible to navigate to the diferent forums etc...

Strange... Really... by example whe I come to forums.adobe.com I can select
AIR Forum in the select box, but when I click the "OK" button nothing
happends....

Weirdest Problem I've Encountered With An Ipod

I just bought a new Ipod and its been working great for the past couple of days then out of nowhere today I hook up my Ipod to my PC and wait for the usual "Do Not Disconnect" sign, but it doesnt come nor does the Ipod charging icon at the top right hand corner of the Ipod. So then I rebooted and tried again, then again, then again. Finally I figured that it must be the cable so I went and got a new Ipod USB cable and that didnt work either I also tried it on three different computers with the same result. So now im utterly confused becuase I cant even reformat it or anything.

1. Did you try reseting your ipod?
2. Did you try charging your ipod from an external power source?
3. Did you try and boot your ipod into disk mode?
4. Did you run through the ipod diagnostic mode to see if anything is wrong?
5. Did you ever droped your ipod?
6. Have you ever loaded any open source software on your ipod?
7. Do you still have warrenty with apple?
8. Did you make sure that nothing is broken in the ipod connection port?
9. Did you make sure that your ipod isn't on hold?
10. Is your ipod powering up in the state that your able to use it still to listen to the music that is on it?
10 Questions please answer them all so i, and everyone else can help you out.
Jon

Problems loading images dynamically with XML

Hi Everyone,
I am working with a project that was build by another
developer and I have been asked to modify it several ways. This is
an interactive map for a hotel brand where when you click on the
USA, you get a list of all the states, click a state and a list of
all the hotels in that state comes up, click a hotel, the hotel's
information is displayed. I understand the structure of the files,
how they make them work, though I couldn't build it myself.
The problem I am having is this. can't make the hotels'
photos load into the flash through the XML. I created a target
movie file that the image could load into but something is not
happening as far as loading the images. I don't know if the movie
clip that I created is the right way to go (it was made as an
object in the library that is exported via AS), or if I should
create one in the action script file that loads the XML data.
I looked at some tutorials about how to load images with XML
but those didn't get into the level of detail that I need for this
project.
I've attached some partial code to see if anyone can help me
work through this.
Any and all suggestions are welcome.
Thanks for the help in advance.
Jeremiah

I'm a noob at AS3 and trying to learn this XML stuff myself,
but i have been able to load pictures to the stage...this might
help you...my xml file photo section is similar to yours, only I
have it labeled as "href" instead of "source"...
var imageLoader:Loader;
var xml:XML;
var xmlList:XMLList;
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest("xmldata/images.xml"));
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
function xmlLoaded(event:Event) :void {
xml = XML(event.target.data);
xmlList = xml.children();
for (var i:int = 0; i<xmlList.length(); i++) {
imageLoader = new Loader();
imageLoader.load(new URLRequest(xmlList
.attribute("href")));
imageLoader.x = 0;
imageLoader.y = 0;
addChild(imageLoader);

Problem loading certain pages with WRT54G2 router

I recently had to password protect my wireless network (I live in the middle of nowhere and we got new neighbors who decided to leech off my internet), and since then have had trouble loading a handful of websites that I had previously been able to access. The websites also do not load on my mother's computer (same network) or on my phone (unless I use my cellular network and not my home's wifi). I have updated my router's firmware and reset it, but this has not fixed the issue. Could anyone help me with this?

Make sure the internet thru the router is working. What you can do is hardwired the pc to the router and check if you can open a website then access the router's interface again and double check the wireless settings, personalize if possible the SSID and the wireless channel (3,6,9,11), also for the wireless security use wpa2 personal/ TKIP. If internet wired to the router is not working, connect the pc straight to the modem for isolation.

Problem loading Cyrillic characters with UTF16

I am trying to use SQL*Loader to load data into a table that consists of American and Cyrillic columns. The Cyrillic columns are of type NVARCHAR2(300).
The database NLS params are as follows: NLS_LANGUAGE = AMERICAN, NLS_TERRITORY = AMERICA, NLS_CHARACTERSET =
WE8ISO8859P1 and NLS_NCHAR_CHARACTERSET = AL16UTF16. The SQL*Loader control file contains the lines:
CHARACTERSET UTF16
BYTEORDER BIG
The data loads but I get question marks in the NVARCHAR2 columns. I tried setting NLS_LANG to AMERICAN_AMERICA.WE8ISO8859P1 and it still loads
the same way. Do I need to change the NLS_CHARACTERSET to UTF16 as well? What else could I be missing?

Please check the below. It addresses the same problem as yours:
http://www.experts-exchange.com/Database/Oracle/10.x/Q_23665329.html

Problem loading jpg's with xml

I have looked through the forum to see if my problem was
raised but I could not find any topic that could help me out. So
here's my problem.
I have a simple photo viewer that load jpg's via xml.
Everything work perfect when I preview the movie in Flash or on my
desktop but as soon as it's uploaded to the server the jpg's so not
load. And everything is placed correct on the server.
Anyone got a clue why?

Ok I found out that if you go directly to the movie in the
browser (http//www.url.com/name.swf) then it work perfect and the
photos load.
I got two other movies in the same html document. It's surely
here the problem occur. But why and what can I do to solve
it?

Problem loading multiple rows with ADI

Hello guys. I setup a custom integrator to use with WebADI. Even after unprotecting the sheet, only the rows that are within the border (only 10 records) are uploaded. I have updated the profile option "BNE Upload Batch Size". Before doing this it would give an error saying "Server could not complete the upload". Now it doesn't give an error but it doesn't load the other values in the sheet. Is there a way of increasing the black border where the data fits so it can load more data? Many thanks

Hi,
there are two options:
1/ When you specify and define your layout you can also define how many rows you like to get in your excel sheet.
2/ If you unprotect your sheet, you can always add rows in between the existing row area. I put always new rows between the existing row 9 and 10. This always works.
Hope this helps
br, Volker

Problem loading googlemaps v3 with stagewebviewbridge in Ios

I have developed an application in Flex 4.6, using google maps v3 javascript through a html page on my server and stagewebviewbridge, the problem is that Andorid works perfect, but ios, load the map, but when the map is moved or do zoom only partially loaded, can anyone help me?
the map is in html http://cellapps.eu/farmacias/mapaG.html
map displayed in a browser works fine, as viewed from android, ios but when you move the map or zoom does not load completely

Have you turned the phone off and on again?
I'm not even kidding - this resolved the same issue for me yesterday.

New iPod nano -problem when sharing account with old ipod

my ipod nano disappears from itunes, yet is still connected, so I'm unable to import music. Anything I do import goes to the shared account. I can't update my nano and it's all very disappointing. what can I do?
toshiba satellite laptop Windows XP

Go through the Apple troubleshooting steps and see if that solves the problem. Find those here:
http://www.apple.com/support/ipod/five_rs/nano4gen/
Also, try charging it over night. Keep in mind that your computer has to be on for the iPod to charge while connected to the USB connection.
i

Problem Loading an Image with javax Swing from a JApplet

First of all, i use JCreator as java creater and have the newest version of java sdk version.
Now i need to load an image from the harddrive on which the JApplet is located. I need to do this from inside the JApplet. I have put my pictures in a map 'images' which is located in the same directory as the classes + htm file. It works from inside JCreator, but as soon as i open the normal htm it just WON'T load that image (grmbl).
Here is my code for loading the image:
public BufferedImage loadImage (String filename, int transparency)
     Image image;
     if (app)
          image = Toolkit.getDefaultToolkit().getImage(("./images/"+filename));
     else
          String location = "";
          location = "./images/"+filename;
          image = Toolkit.getDefaultToolkit().getImage(location);
     MediaTracker mediaTracker = new MediaTracker(new Container());
     mediaTracker.addImage(image, 0);
     try
          mediaTracker.waitForID(0);
     catch (Exception e)
Could anybody help me out here??
I tried a url already using getCodeBase() or getDocumentBase() but that gives an error because it cannot find those if using a JApplet.

Why don't you use javax.swing.ImageIcon? If you already have a flag telling if it's an application or applet, use the getDocumentBase() to base the URL in the applet part only.

Problem loading Ellen Podcast with 5G ipod

Similar Messages

Maybe you are looking for