Problem loading text master data for one value

Hi guru's,
We are trying to load texts for an standard characteristic (data element : Char 30). The problem comes with characteristic value 4700112703/04/19 , all other values load correct but this one is recognized by SAP as an incorrect value. It seems, by the PSA explanation, that the / is incorrect.
Do you know why this value is incorrect ? Is there any way to load this record to the characteristic ?
Thanks in advance.

Hi,
In RSKC specify the value as ALL_CAPITAL which would allow all the necessary and SAP supported values(including /) to come into BW.
Refer this blog for more information
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Regards,
Rik

Similar Messages

Not able to load text master data for customer infoobject

Hi Guys,
I am not able load master data text to the customer infoobject.
I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
I have run a repair full request(extraction from ECC) and
i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
Please post your suggestions.
Thanks in advance
Regards,
Siva

Hi Ramanjaneyulu,
Transferrules screen shot:-
update rules
Regards,
Siva

How can I upload text master data for attribute-only Charactertic?

I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
How can I upload text master data for attribute-only Charactertic?
Thanks!

Hi roberto,
I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search.

How to Load the Master Data for custom defined Z infoobjects?

Hi Gurus,
This is the requirement.
Some screen enhancements has to be made by adding new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
Please someone throw some light on this problem.
Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined Z infoobjects ZNAME AND ZCITY in BW.
Please help me out.
Thanks is Advance,
Regards

you can by creating generic datasources on thoase tables with Full load or delta.
if the number entries is less.. you can try full load...
if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
all the best.
Nagesh Ganisetti.

Problems with maintaining master data for infoobject 0SOLD_TO

Hello experts,
I'm not getting 'maintain master dada' option when I right click on the infoobject 0SOLD_TO. The data is already there from pervious data loads (from R/3 systems) and is visible in the reports. I'm using this infoobject in cube 0SD_C05 to report quotation/order details. Am I missing something here? Please guide.
Thanks
Sumit

Hi Sumit,
It looks you have asked your question in a wrong forum.
Please use BI forum to post your question.
Regards,
Pooja

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Error while loading 0Plant master data in PSA

Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Upload SNP master data for future Materials

Hello Everybody,
I am working on SCM 2007 and due to client's business requirements, I need to load the SNP master data of the new materials which presently do not exist in my R/3 system and will be produced/introduced after six months.
Client wants to do the forecasting for such materials from now onwards. Since, these materials do not exist in R/3, I cannot CIF and bring the master data in my APO system. Please suggest, how can I load SNP master data for such materials. Is there any standard tool available for the same?
Kind Regards,
Rahul

Hi,
If you require product locations only for forecasting I guess you will require only products and locations to be define in APO. I would suggest that you can create a seperate Model for this product locations which is not their in ECC and do the forecasting if it satisfies your business requirement, the reason being once you create master data directly in APO it will not be possible to CIF the master data fom ECC which will create inconsistency.
You can use LSMW also to upload product and location if you are not defining comples parameters like Time phase cost in Product location & their are not many validation which I assume will be the case.
Thanks,
Sanjog

Credit master data for Customer

Hi,
I need solution for the below problem.
Credit master data for Customer "X" is not maintained.
Is there any possibility to get the information /Error message during sales order creation/Save for Customer "X" as Credit master data is not maintain.
Information/Error message shouldd be:No credit master data maintain for Customer "X"
Thanks for your help.
Regards,
Balaji.

Hi
You can use the followig user exit which will perform a check while saving the order.
Take the help of your abaper to write a code to check if the credit master has been maintained for the customer before saving the order.
Program,: MV45AFZZ
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Regards
Madhu

Problem in loading the Text master data

Hi,
I have installed one datasource for Text from business content.
On checking the records in RSA3, it has 124 recs.
But while loading data in BW its fetching only 66 recs.
This is the problem with the language key.
Its not loading the data for "EL" . Its only loading for EN
Any idea how to load all the text master data.
Thanks,
Jeetu

I checked in table, EL is maintained(greek language) , But then why extractor is not fetching data for this language ? Its populating fine for EN
I checked Info package there is no selection/restriction there
Any guess how to load for EL?
Thanks,
Jeetu

Report problem when show attribute only Characteristic text master data

I want to show the attribute only Characteristic in report. In report, it shows "Not assigned" for the Char row, but other data show properly. I checked the Char text master data. It looks fine. I don't what's problem?

hi robert,
some of your characteristics probably don't have the attribute assigned (meaning they have a blank value for that attribute). i don't know if this is configurable, but blank entries all display as '#' and the text 'Not Assigned'.
(as an additional comment, if you take a look at the masterdata of the attribute you used (which i presume exists), there should be a blank entry there.)
for example, in the case of the deletion flag of an article, not all articles are flagged for deletion. if you create a report that displays the article number and the deletion flag attribute, you'll see quite a bunch of 'not assigned'/'X' in your output.
let me know if that helps.
ryan.

Missing some master data for delta load( its very urgent please)

Hi,
I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
Address Number/ Addr Ln 1 Txt/ City Dstrct Nm
9025750333/ #/ #
help me its very urgent

Hi Sumanth,
check the delta queue and the V3 job is it running correctly ,
Have a look at OSS note :728687
and also see the following thread
Deltas are not available in Delta que
Delta Queues are not cleared in R/3
No data in RSA7 for 2lis_03_bf : HELP
check the data may b it is in modifide status not active.
regards,
supriya

BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject

Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
Vasu

Thanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu

Load customer text master data error

Hi Experts:
When load customer text master data ,system show the following error message ,could you please
help me to solve the problem , thanks a lot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

Delete PSA request from Datasource -> manage
Do a fresh load and Goto to infopackage monitor
Environment --> Short Dump --> in Source System...... Click 'TODAY'
Next screen would show u all Runtime Error... Double click on the first one
from the next screen, u can do analysis by double clicking 'What Happend ?', What can u do? Error Analysis..
By doing this U can find out what exactly is the problem

Master Data for Text

Hello Everyone,
I am trying to load sample Master Data. Can do that successfully for Attributes but not for Text. Can anybody help me.
Thanks
Points would be assigned for those answers which will resolve the issue

Hi SAS,
Suppose your master data attribute data will be like this,
MaterialID , Material Name , Material Group
CSV file will be like this,
M001 X001 Y001
M002 X002 Y002
For this if you want to load text data means,
The fields are
MaterialID, 0Langu , 0txtsh
CSV file for this will be like this,
M001 EN SAMPLE
M002 EN SAMPLE
So you are loadind text for that same material ID or different material ID?
and alsi check if there any lowercase letters in your CSV file .
Regards,
Arun.M.D

Problem loading text master data for one value

Similar Messages

Maybe you are looking for