Problem loading update to Windows

We recently had to buy a new modem after our last one died. Since then I haven't been able to update Flash. Whenever I attempt to I get the message "Your current security settings do not allow this file to be downloaded". I have a HP laptop with Windows 7 64-bit operating system, IE 11, Flash version 15.0.0.167. I haven't been able to figure out what my security settings should be, and none of the other forums or videos on YouTube give me any answers. I hope someone can help. Thanks.

Error message: "Your current security settings do not allow - Microsoft Community

Similar Messages

Printer Problems since updateing to WIndows 8.1

Before I updated to Windows 8.1 the other month everything was fine on my new laptop then I went to scan something from my HP Photosmart B109n and it didn't work because the driver was now missing and the HP app that replace the HP printer manager is useless.
On the advice of the HP site I tried to download the new driver but it wouldn't go, it said I had to remove the exsisting installation but when I try it just restarts the computer but is still there afterwards. It turns out that the uninstall has gone missing from the current and the install is missing from the install program I have downloaded.
As a last resort I used the sytem restore but not only has the printer issues not changed but now some of the pre-loaded apps won't work and are asking for the Developers Licence to be renewed.
I am at a lost as to what to do next - please help!

Your notebook isn’t known to me but in case of Win 8.1 update you should check this Toshiba update to Win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/
There you can check if the Win 8.1 is supported on your notebook and how to perform the step-by-step update to Windows 8.1
Some drivers must be uninstalled and updated after the Win 8.1 update installation!
Regarding your printer issue:
Every printer manufacturer provides own drivers for the Windows system.
It’s not known to me if HP released compatible Win 8.1 drivers for the own Photosmart B109n printer but to be honest this issue isn’t related to the Toshiba notebook. If you have problems using HP printer in connection with Win 8.1, you should visit the printer manufacturer support page to get some workarounds and troubleshooting tips.

Hp pavillion 500-185el graphic card problems after update to windows 8.1

hallo
after i done the Windows 8.1 update my graphic card is giving me some problem.
occasionally my desktop become black for 1-2 seconds and the background disappears.
I've update all drivers.
the problems started after the update to Windows 8.1
graphic card: AMD Radeon HD 8570
driver version: 13.150.102.0
thanks for support

Hey @jdudleyjones ,
Welcome to the HP Forums!
I understand the card reader for your notebook is no longer working after updating to Windows 8.1.
You're probably right that it's a driver issue, however just like you I don't know which card reader you're using either.
Can you please tell me which notebook you have? For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
It would also help if you could tell me the Hardware ID for the card reader. Here's how you find it:
Press Windows Key + X
Click Device Manager
Click View at the top and select Show hidden devices.
You will most likely find the card reader listed under Other devices as an Unknown device.
Right click on it and select Properties.
Select the Details tab.
Change the drop down menu to Hardware Ids.
Note down the first ID in the list (as you'll see they're all pretty much the same regarding the Ven_ and Dev_ numbers which is all I need).
Once you've provided this info I should be able to find the drivers for you.
Look forward to hearing back from you!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Problems after updating to window 8.1

I have a notebook Lenovo G510, I7. My problem is that when I update the windows system to windows 8.1, the system becomes instable. A lot of bug happens !!! Any help ??? Thank you in advance.

What was your previous installation?If you had windows 8 ,using the windows reset option would allow you to go back to windows 8
More here
http://windows.microsoft.com/en-US/windows-8/restore-refresh-reset-pc
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Display adapter problems after updating to Windows 10

Hello,
recently I updated to Windows 10 and I have an issue with my graphics card. In BIOS I have enabled the "Fixed Mode" that will allow me to have the graphics card always on. For some strange reason I cannot switch to my AMD Radeon HD 6700M gpu.Please help ! Thank you,
MIchael

Hi,
How about your network problem recently? if problem persists, you can follow the steps below to collect the scenario tracing and the WLAN logs.
1) Enable RAS Tracing on the client.
Over an Administrative command prompt.
C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
Over an Administrative command prompt.
C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
Over an Administrative command prompt.
C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
Over an Administrative command prompt.
C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Roger Lu
TechNet Community Support

Lenovo Y570 problems after updating to Windows 10 from Windows 7

Hi everyone, I updated my operating system to Window 10 from Windows 7 four days ago and I am having a ton of problems. I lost a lot of my Lenovo interface options as well... One of the worst and most annoying problems is that randomly, for half a second, the computer stops and thinks which freezes up my typing. If I am writing something, when it wants to freeze it prevents me from typing that letter. It basically overrides my keyboard well it does that freezing for half a second. Also, when I have a drop down menu it will close when this happens or when I right click, the menu will disappear when this "glitch" happens. One of the biggest clues I found is under the task manager. In the Processes tab, when this "glitch" happens "Windows Problem Reporting" pops up for a half second. I am not sure if that is causing this problem or if something goes wrong and "Windows Problem Reporting" pops up because of something else? Is there a way to check and see what these "Windows Problem Reporting" are? My other problems are that my fan control does not work anymore. I had the option to control the speed and the sound of my fan before updating to Windows 10. Would Lenovo or Windows 10 ever going to sent a drive to fix this problem? Also, I can not control my GPU switch anymore. Before the update I could change my GPU from Intel HD card to Geforce 555M. Now I have no idea what GPU I am using and how to go back and forth. Is there a fix for this? Since all these problems occurred with the Windows 10 update, would it be better for me to go back to Windows 7 and wait to see if Lenovo and Windows ever going to create drives for Lenovo Y570? Is it advisable to switch back W7 and switch back to W10 later?

spdfolife wrote:
Hi everyone, I updated my operating system to Window 10 from Windows 7 four days ago and I am having a ton of problems. I lost a lot of my Lenovo interface options as well... One of the worst and most annoying problems is that randomly, for half a second, the computer stops and thinks which freezes up my typing. If I am writing something, when it wants to freeze it prevents me from typing that letter. It basically overrides my keyboard well it does that freezing for half a second. Also, when I have a drop down menu it will close when this happens or when I right click, the menu will disappear when this "glitch" happens. One of the biggest clues I found is under the task manager. In the Processes tab, when this "glitch" happens "Windows Problem Reporting" pops up for a half second. I am not sure if that is causing this problem or if something goes wrong and "Windows Problem Reporting" pops up because of something else? Is there a way to check and see what these "Windows Problem Reporting" are? My other problems are that my fan control does not work anymore. I had the option to control the speed and the sound of my fan before updating to Windows 10. Would Lenovo or Windows 10 ever going to sent a drive to fix this problem? Also, I can not control my GPU switch anymore. Before the update I could change my GPU from Intel HD card to Geforce 555M. Now I have no idea what GPU I am using and how to go back and forth. Is there a fix for this? Since all these problems occurred with the Windows 10 update, would it be better for me to go back to Windows 7 and wait to see if Lenovo and Windows ever going to create drives for Lenovo Y570? Is it advisable to switch back W7 and switch back to W10 later?There might be a need to reinstall drivers. Try installing them using compatibility troubleshooter.

Problem after updating to windows 10

My laptop is HP Envy m6 1213 tx. Recently I have updated it to Windows 10. After updating to windows 10 my laptop slowed down. Even opening File explorer is also very slow. Not only File explorer every process and every application became slow. Please suggest a solution to my problem

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

Problems since update from Windows 8 to 8.1

So the other day the Windows 8.0 side of my 27-inch, Late 2013 iMac with Fusion drive forced me up update to Windows 8.1 - it just started doing it automatically when I was on my lunchbreak. It seemed to update fine, and everything seemed to work once it booted up in 8.1. I noticed that the sound was no longer working on the Windows 8.1 side - it would only make the startup sound after a restart/turning on, and there was a red light coming out of the audio jack. Sound worked fine on the Mac side still. So, I updated the drivers here (Boot Camp Support Software 5.1.5640) based on my computer model. During the instal of the drivers, it said "Need to repair drivers", and then went on to install without any problems that I could see.
This has now fixed the Sound driver issue, but now my keyboard is stuck in French mode (I think?) where when I type the "/?" character, it types "é" or "É". I cannot seem to fix this by going into Languages in Control Panel, or by re-installing the drivers.
What can I do? Are there any more details I can give to help someone problem solve this with me?

Hi,
For the issue, let us try rebuilding performance counters to check the result.
Press Win+x, and click Command Prompt(admin)
Type "CD c:\windows\system32",and Enter.
Type "LODCTR /R", and Enter.
Note: This let you rebuild the perf registry strings and info from scratch based on the current registry settings and backup INI files.
Keep post.
Regards,
Kelvin hsu
TechNet Community Support

Problems loading updates for PSE/PRE 9 after re-installation

Hi
After having upgraded Windows 8.1 to 64 bit (earlier 32 bit) I re-installed both PSE 9 and PRE 9 and registered both of them
Next step was to download PSE/PRE updates (packages available for both products) but that ends with error messages
Adobe Photoshop Elements 9.0.3 Update
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.5 Update
There was an error downloading this update. Please quit and try again later.
Premiere Elements 9.0.1 Updater
There was an error downloading this update. Please quit and try again later.
I quit and came back later - several times - yesterday and today - but no chance to load the updates.
I really need the updates at least for Camera Raw 6.5 which refuses to open CR2 files from a Canon EOS 60D
My guess was that it could have to do with missing deactivation of my previous installation (meanwhile fixed, by booting into 32bit Windows 8.1 - still available on another partition, deactivating and removing both PRE and PSE).
So I was in contact with Adobe Support via chat in case my serials had to be unlocked but they just replied that I would have received another error message and that I shall contact the forum for older products like PSE9
But they also stated that the updates are available @Adobe, no known system problems.
I hope you have a better answer.
Thank you for helping!
Br
Bernd
PS:
System Config: i5 3.2 GHz, 12 GB RAM, Windows 8.1 x64 t (new installed), NVidia GeForce GT520, latest driver
Main Adobe products in use: Lightroom 5.6 (x64), PSE 9 & PRE 9
Internet Connection: Fibre 100 Mbits up/down (this cannot be the reason )

It's an issue on adobes side.
The easiest thing to do is download and install the updates from here:
photoshop elements 9
Adobe - Photoshop Elements : For Windows
premiere elements 9
Adobe - Premiere Elements : For Windows

Desktop H430 problems after update to Windows 8.1

Desktop LENOVO IdeaCentre H430 VDH3UGE Intel Core i3-3220 3,30 GHz, 8GB RAM, 1TB HDD, AMD HD7570, Win8
After updating Windows 8 to 8.1. I have problems with software on my computer including Mozilla Browser.
Although the software installed in Windows 8, still run in update 8.1, many give problems: Sluggish, long (to very long) response time, hanging and such like. Even Mozilla Firefox worked in 8, but gave problems in 8.1, so I switched to Nightly.
Programs like Magix MusicMaker 2013 run really bad.
So too Arcsoft MediaImpression for Kodak
And in general there is a sluggish/long/hanging response.
I looked at Lenovo driver website to see if I needed updates and tried the first couple:
Realtek Audio Driver for Windows 8.1 (64-bit) – Desktop = Realtek Audio Driver
h1100913.exe !!!!
But I must have screwed up with this download because I lost sound!!!!
Or I screwed up with BIOS download???
Flash BIOS update - Flash from Operating System version for H430 - Version ECJY24AUS
But when I got to the Core-Chipsatz Drivers I really got confused!!!
There were two options and I had no idea if I needed one, and which one, or both:
Intel Me Driver h1100732.exe Windows 8.1 64-bit
Intel chipset Driver h1100731.exe Windows 8.1 64-bit
Too complicated for me, I should have stayed away from this, have no idea which is right - or even if I needed them really. It was just because the computer worked so bad!
Can anybody help, advise

I no longer believe it is avast antivirus causing the problem. I think Microsoft have screwed up again. Both Spybot and Avast were no longer compatible, and had to be updated to a new version - luckily for both of these there was a new version available. For some of my other software there is not - although they all functioned on W8 !! additionally I get other strange "happenings" like a window saying there is no CD inserted when there is no CD for the program (I read somewhere of someone also mentioning this) and other strange/weird little happenings which are not supposed to happen - and for no apparent reason!
This lenovo H430 is a really bad computer - now with 8.1 it is even worse !

Problem with update for Windows 7 64 bit

I downloaded and updated to the newest version of iTunes, but when I restarted, as requested, my internet wouldn't work anymore. Not just when iTunes was open mind you....it wouldn't work AT ALL!! Up until the update iTunes ran fine, the internet was fine. So I uninstalled iTunes and now my internet is working again. So what's up with that? Why would iTunes suddenly interfere with my networks for the internet?

If you're new to forums you might need to know that Adobe have many dozens of different forums. If you post in the wrong one, the people there won't know anything about your problem, so take care to choose carefully.
The Installing Flash Player forum is here: Installing Flash Player
Good luck!

Probleme mit update von windows 8.1 auf 10

Hi ich hab mir vor 2 Monten einen G 50 gekauft mit windows 8.1 und wollte ihn heute auf windows 10 updaten.da ich den update Iccon nicht hatte habe ich, den troubelshooter von windows durchlaufen lassen und dabei kam das siehe Bild. Statt windows8.1 wird 6.3 angezeigt und dann wird mir gesagt mein Pc ist nicht auf dem neusten Stand und das update gebe es nur für 7 und 8. aber habe ich doch.hat jemand ne idee wie ich das beheben kann, liegt es an meinem Pc oder weiß jemand was anders. Hoffe ihr könnt mir helfen

Hallo Engelsdrache,
das erste und wichtigste was du kontrollieren solltest sind die Windows Updates.
Daher am besten einmal in die Systemsteuerung gehen und dort die Windows Update Funktion öffnen.
Dann nach Updates suchen und sofern welche gefunden wurden installieren. Das ganze wiederholst du dann solange bis du als Meldung bekommst, das dein System auf dem neuesten Stand ist.
Im Anschluss daran sollte es mit dem Upgrade auf Windows 10 auch klappen.

Problem loading quickbooks for windows on macbook pro

I have been told by quickbooks that I cannot use quickbooks on my mac using bootcamp. They say sometimes it will load to the harddrive OK but for others it will not. Is there a work around anyone knows which allows using the PC version of Quickbooks on a Macbook Pro?

I'd suggest you ask for assistance in the VMWare Fusion forums:
http://communities.vmware.com/community/vmtn/desktop/fusion
This isn't an iMac issue as such, so this probably isn't the place where you'll be most likely to get help.
Regards.

Update KB2952664 failed on 10-15-2014/ran mr fixit and it failed to fix problem/I'm running windows 7 64 bit. what can I do?

Update KB2952664 failed on 10-15-2014/ran mr fixit and it failed to fix problem/I'm running windows 7 64 bit. what can I do?

Hi LarBar,
Like Cyber_Defend_Team said, we need more information to help you analyze your issue.
Did your KB2952664 Windows Update fail to install? Any errors?
Have you tried this troubleshooting method?
Troubleshoot problems with installing updates
http://windows.microsoft.com/en-in/windows/troubleshoot-problems-installing-updates#1TC=windows-7
In addition, go to Windows update then click on View update history then click on Installed updates,
search for the failed kb number and double click on it and it will prompt to uninstall. Uninstall then
reboot and go back to Windows update and click Check for updates it should come up and re
download and install.
Karen Hu
TechNet Community Support

Problem with iTunes in Windows XP

I am having a problem loading iTunes in Windows XP service pack 2. Every time I click on it, it seems to load for a little while, and then a window pops up saying "iTunes has encountered a problem and needs to close". When I clicked on the details tab, it showed me a bunch of stuff I couldn't understand. Here's what it said:
AppName: itunes.exe
AppVer:7.6.2.9
ModName: unknown
ModVer: 0.0.0.0
Offset: 00000000
How do I get iTunes to work right?

The first question, Have you installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter
These are know to cause troubel with Quicktime and must be uninstalled before proceding.
It is also a good idea to go to your Control Panel and try to launch QUicktime preferences - you need to be in classic view to see it.
Post any error message in full. This error message can give a clue to the presence of problem codecs if you are not sure.
Next do a removal of Quicktime with installer cleanup, followed by an install of the latest version.
I will give a method for complete removal, cleanup and reinstall of iTunes, Quicktime and related components, but in your case it may be possible to just do the QUicktime part. Don't forget to delete the recommended files from your system32 folder.
== uninstall with cleanup ==
Download a fresh copy of iTunes and the stand alone version of Quicktime
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
If you hit a problem with one of the uninstalls don't worry, carry on with the deleting of files and folders as directed in the method.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Problem loading update to Windows

Similar Messages

Maybe you are looking for