Problem loggin into console with new win2k domain

Hi
I've just had my win2k domain name changed on my machine and I can't seem to open a netscape console to view my LDAP directories. I'm running win2k server with netscape directory server. I've checked my port connection and user credentials but I cannot log in. (when I log in to windows I log into my new domain).
Does anyone know of an explanation for this, better still a work around. I'm considering the last resort of reinstalling iplanet directory server but I'm not sure if that will remove my existing directories..?
Any help welcome..
tim

The machines and domains allowed to connect to the admin server are stored in an entry in the Directory under o=netscapeRoot. Search for 'objectclass=nsAdminConfig'.
You should be able to change the nsAdminAccessHosts value to the new domain, if bound as admin or directory manager.
Regards,
Ludovic.

Similar Messages

SwithcHosts was installed, not understandable, uninstalled, causing problems. FF opens with New tab, not Home Page

That's SwitchHosts. Uninstalled it, removed from profile, but still FF starts with New tab and not Home Page. Is there a line in about:config that needs changing???

That didn't work. But, I did remember to do a System Restore, and that seems to have fixed it. SwitchHosts is no friend of mine. Even the MVP program has limits. I wish these programs did not try to take over my computer and they should have good uninstall features.
Thanks for the reply.
Walt

[GeForce 6] problems overclocking my NX6800GT with newer nvidia drivers

Hiya guys,
JUst wondering if anyone else is having issues oc,ing there 6800gt with the newer nvidia drivers?any driver newer than the 71.25 version causes freezes and corruption and does not matter what speed its at even does it at 360 1050 but at default 350 1000 everything is fine.
BUt oc,ing with the msi 71.25 and below drivers it runs without error at 400 1100 temps are at 52c load 45idle,
Have installed fresh winXP pro,thought it may have been a power problem so i ripped out my 420w thermaltake psu and replaced it with a nice new Enermax noisetaker 485w psu with dual 12v:18a rails still no go,have tried every driver availible only drivers 71.25 and below will oc,all driver up to 76.50 will not,also have tried coolbits,rivatuner,powerstrip etc..and still no go.
Has anyone come accross this?? feel free to share.....
AMD64 3200+ 2200mhz
Gigabyte k8ns pro nforce3 mobo
2x512 kingmax pc3200 memory
Msi nx6800gt 256mb agp
2x80gig westerndigital ide HDs
pioneer 107d dvdwriter
samsung dvdrom
Audigy 1 sound with 5.1 genius sound system
Black thermaltake tsunami dream case
21inch sony trinitron flatdisplay
Enermax noisetakerEG495P-VE dual 12v:18a rails +5v:32a +3.3v:32a 485w PSU

wow - this is my story also... I have been up and down the street with my MSI 6800GTs (in SLi) and they do not OC worth a damn... I am pretty bummed out due to the money, time, blood, sweat, and tears I have shovled into this rig and I only get stock... essentially... I have tried all the OC'ing utilities, different power supplies, volt modding... and I think it's got to be some bios setting or maybe the one piece GPU memory cooler design... the GPU and memory both heating this thing... I don't think it works that well... honestly... I have been around the net, on many forums... and the only peeps who have /any/ luck with OC'ing these MSI 6800GTs are water cooled... anyways... I have spent soooo much time on this and for that reason alone I doubt I will be buying MSI products in the future, but I would still like to find a solution which allows me to push my $900 worth of video cards to ultra speeds. I am really considering going with water cooling... but I really don't want to deal with the hassles of it right now... what I would really like to find or buy are some 6800 Ultras reference design coolers to install on my GTs... I think a lot of this inabillty to OC well is heat related... I know I can get 10mhz more out of my cards when my room is cool.... I have a LOT of air on these cards... and good ventilation... I have my system stats in another post on this forum entitled "nx6800GT OC issues in SLi" or something like that. Good luck man, and I will let you know if I find a solution for this.

Problem printing thru network with new 8500A all-in-one

I installed a new Officejet pro 8500a plus on my network. I have 3 computers on the network set up this way: DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to main COMPUTER and other 2 computers print through the main computer.
I installed the printer sucessfully and ran the HP network wizard following the dialogs for connecting through another computer. I can print, and fax fine from the main computer but not from the other computers. I configured the printer as "shared" on the main computer and the other computers recognize the printer and set it as the default printer. But when I try to print form the other computers nothing happens. When I go into control panel - printers - properties - ports on the main computer, the printer is listed as USB002 but when I click on "configure" I get "An error occured during port configuration. This opperation is not supported".
Main computer is running Windows Vista with current updates
Other computers are running Windows XP SP2 with current updates.
Any ideas?
Thanks, Jim
This question was solved.
View Solution.

Why are you using Windows print sharing with your nice network printer? This mode only supports printing, not scannning or faxing. The better way to do this is to attach the printer to your router with Ethernet or wirelessly so that all PCs (regardless of how they connect) can use all of it's features. Disconnect the USB cable and run the Wireless Setup Wizard (if you want to connect it wirelessly, otherwise, plug the Ethernet cable in to the printer and router) from the front of the printer (Setup >Network menu), then run the HP software to "Add a Device" on each PC.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Problem connecting through RFC with fully qualified domain name

I am using the .NET Connector and RFC to call a BAPI
I use a fully qualified domain name in the form <DOMAIN>\<HOST>
The RFC seems to have problems with this form of address. It produces the following execption in my .NET code.
SAP.Connector.RfcCommunicationException: Connect to SAP gateway failed
LOCATION CPIC (TCP/IP) on local host
ERROR hostname 'DOCUNET_AG\DWSAP' unknown
TIME Mon Feb 05 11:57:20 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -2
MODULE ninti.c
LINE 329
DETAIL NiPGetHostByName2: hostname 'DOCUNET_AG\DWSAP' not found
SYSTEM CALL gethostbyname_r
ERRNO 11004
ERRNO TEXT WSANO_DATA: Valid name,
 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo
, Encoding encoding, String languangeCode)
 at SAP.Connector.SAPConnection.Open()
What can I do that I am able to use a fully qualifies domain name in this way?
Thank you very much for your answers.
Mirco

Hi Mirco,
additional to my first reply, open a shell window and type

ping <computername>

or

ping -a <ipaddress>

so you should get the full qualified name for the host.
Regards
Holger

Output Tray Problem - Old c8088a finisher with new 9050dn printer

I recently switched from printing with a 9000dn with an c8088a finisher to a new 9050dn paired with the old c8088a finisher.
With the old combination, I could make jobs go to the "upper left stacker" output tray on the finisher by prepending the job with the escape code \E&l2G. With the new combination of printer and finisher, the old escape sequence no longer works, and jobs go to the top tray. I have also tried other escape sequences, replacing the '2' with other digits that refer to "mail bins" and so forth. None worked.
I know the finisher works, because if I use the printer's menu to change the default output tray to the "upper left stacker", then print a config sheet, the config sheet is output to the finisher's stacker. I don't want to permanently set the stacker as the default output tray, though.
Any ideas for what's wrong? Is the c8088a compatible, or do you have to pair a 9050dn with a c8088b? Any idea for what escape code I should use? Thanks.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problems connecting IOS devices with new Comcast wireless cable modem?

Just installed a new cable modem from Comcast, it is their new high speed unit manufactured by Cisco. of the three IOS devices I've tried, all running currently the OS , are having problems connecting with the error "Unable to join the network " Home-XXXX" if you keep asking it may connect but I have to be persistant. My Devices are iPad 4 g Retna with 30pin connection, an iTouch ,latest model with camers, and current iPad mini. is it me or the modem?

You have probably already solved this issue, but I would hide the comcast wifi network (dont broadcast ssid) and make the password very hard. Make sure that put it on channel that does not conflict with your Airport Extream.
Connect the Comcast modem/router to the airport extream's wan port with an ethernet cable.
Comcast usually ships the DHCP enabled. Use the comcast DHCP server for your airport.
Configure the airport extream to "create a network" set the network to "bridge mode".
Name your network, broadcast the ssid all on the airport. Now all your devices will connect everytime. Use can use the Comcast "private" wireless network for maintenance, etc.
Just some thoughts... good luck

Problem connecting bluetooth headset with New MacBook Pro and OS 10.10. MBP did not recognise the headset (Platonic BeatBack Go2)

I have been using Plantronic bluetooth head set (BackBeat GO2 produced by Platonic) without any problem with my old Macbook under OS 10.6.8. When I bought a new Macbook Pro Retina (MBP) loaded with OS 10.10 and a MacAir (MA) also loaded with OS 10.10, I have problem connecting the head set. Both MBP and MA could not recognise the head set. Can some one help ..... I can't do without the bluetooth head set...

I have been using Plantronic bluetooth head set (BackBeat GO2 produced by Platonic) without any problem with my old Macbook under OS 10.6.8. When I bought a new Macbook Pro Retina (MBP) loaded with OS 10.10 and a MacAir (MA) also loaded with OS 10.10, I have problem connecting the head set. Both MBP and MA could not recognise the head set. Can some one help ..... I can't do without the bluetooth head set...

A problem using MobileMe mail with new Firefox upgrade?

I can no longer attach photos/documents to my MobileMe outgoing messages. This problem seems to have coincided with the recent Firefox "upgrade" 7.0.1?

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Cant sign into iCloud with new update

As of the new update i can't sign into iCloud. I've tried deleting the iCloud account file in library
and my gestures are broken in Safari

You will need to go to a computer and go to System Preferences and sign on your new iCloud account there to activate it. You can then sign it out (so whomever was signed on there before can sign back on), and then you will be able to sign it on to your device.
Cheers,
GB

Problems singing into iChat with my Apple ID.

iChat won't allow me to sign in using my Apple ID. Everything else works fine but the apple ID won't work. It's telling me that the password is incorrect when it isn't at all. is anyone else having this problem?

So in the iChat Menu > Preferences > Accounts you have a Blue Globe ?
The Account name Ends with @mac.com ?
The name and password will let you sign in to your iDisk and Mac Web pages ?
It works it Mail as an email ID and Account name ?
Using the FAQ I posted above, you can sign in to the current MobileMe pages ?
In Checking that same name (also with a Blue globe) in the Keychain it has the password that works to log you with Mail or to the other options I listed above ?
OR
The name has @me.com at the end as the name was gained from the current MobileMe pages that Apple have, that replaced the @mac service ?
The other info above still applies about being able to Check it in different Apps and the Keychain.
1:50 PM Sunday; February 15, 2009

Anyone having problems installing Boot Camp with New Mac Pro 2.8?

I just get blank screen after it restarts with XP disk. I'm using a vga - dvi adapter with a apple 17" display..
I've phoned apple and read up on here but nobody seems to know. I just wondered whether my 2008 Mac Pro was faulty...
Please can you help?
cheers

Are you getting a white screen after the Mac reboots? If so, try disconnecting all non-essential USB/FW devices.
I had the exact same problem and I went through a long, stressful process of elimination to get it working, even to the extent of using my MacBook as an external drive through target disk mode!
It turned out to be my iMage USB camera. Even after successfully installing Windows I have to disconnect it before using Bootcamp.
I Hope this helps.

Response time problems, slow excel execution with new ibook

Hello: I'm a first time ibook user (long time pc user). I have had my ibook for less than 1 month. It's sometimes very slow. I can understand a slow response when I'm accessing a website, but I don't understand why I often experience a 5-15 second delay when I'm in excel and I click on "file" or "format". (I very often get the whirly multicolored pinwheel.)
I have also had to do a "force quit" a number of times to stop an unresponsive excel model or firefox application.
I'm also very disappointed in the excel performance. I run very large excel models some of which take a minute or more to recalc on our hp pavillion pc. My new ibook, however, doesn't run these modes any faster than my 2-3 year old pc. I haven't upgraded from the standard memory and I don't know how much that would help.
Anyone have any suggestions to offer?
Mikecupertino

Welcome to the Apple Discussions!
I have had my ibook for less than 1 month.
If this is the case, then you qualify to get the next version of Microsoft Office, version 2008 for free (besides shipping). Check out this Microsoft site:
http://www.microsoft.com/mac/go/promotions/supersuitedeal/
Next week there are bound to be several new announcements from all sorts of Mac-related companies at the Macworld Expo in San Francisco. Microsoft is releasing their next version of Office for the Mac next week too. This version will run natively on an Intel-based Mac. Right now, Office is running in Apple's "Rosetta" technology which emulates the older, PowerPC processors. This allows you to run applications that haven't been updated yet, but it does slow down performance and increase hardware requirements. I think you should see better performance with the updated version. (Although, there may be a few bugs to work out with the brand new version, so keep check on updates!)
-Doug

Mediasmart software problem loading onto computer with new hard drive and operating system

My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?

waynesworld57 wrote:
My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?
Hi,
It looks like it's a common issue: http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply-Only/HP-Mediasmart-Software-package-for-Wi...
Try VLC as a multimedia player: http://www.videolan.org/vlc/download-windows.html
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Unable to sign into itunes with new laptop

Just had my laptop updated to Win 7 Ultimate. Downloaded iTunes. Now it won't let me sign in.
Says iTunes store unavalible at this time try again later. I am able to sign into Apple.
Already did the Command Prompt for "winsock reset".
Any help is greatly appreciated.

Same here, but with Mavericks download. Tried a few hours ago, and a no go then or now (2:20 PM EDT USA). Left a message on MacRumor but don't expect any assistance but if lucky, I'll return here to post.

Problem loggin into console with new win2k domain

Similar Messages

Maybe you are looking for