Problem logging into essbase studio in windows 7 -64bit-

hi everyone
I have a problem logging into Essbase studio as i have installed Essbase foundation 11.1.3 and Essbase server in windows 7 "64bit" version
when ever i try to log into Essbase studio it gives me this error
Error connecting to Essbase server studio
Reason
Network Error
Network Communication with the server failed
connection refused
as in the following pic
[http://www.4shared.com/photo/dDPU68B5/errr.html]
I hope you can help me with that problem.
Thanks in advance..

Hi,
I dont think Windows 7 is supported OS.
Go through the support matrix,
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
Having said that, there are ppl who have installtion done on Windows 7 as well.
I would say, check the services first if they are up and running or not. If yes, then logs should be the first place to visit.

Similar Messages

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

I downloaded Adobe air and the desktop app for story and can get online from that. Thanks anyway. T

Problem Logging into only one of many computers

1. I have two desktop computers. One is hard wired to a linksys router and works great. The other desktop that has a problem logging into my email account. See (5) below. 2. First you must know that I also have an apple mac that is connected via the Router and it also works fine running OSX. 3. I have a Dell Laptop running Vista connected via the Router that runs fine. 4. Have another Dell Laptop running Win 7 is connected via the Router that runs fine. 5. I have this desktop running Win XP pro that is my problem. This is how the problem goes: I get to what appears to the correct login page; Type in the correct user and PW info; execute by clicking on the correct button; Nothing happens; I try several other ways; I click on the "signin" box at the extreme top right and nothing happens; I click on another box that ask for my location and a new window appears asking for my addres and zip code. I eventually get to the email. Now at this moment I look at the top of this my current window and I see that my location is shown and I am signed into verizon to write to you. There is a block that reads "signout". What is going on?

And one more small detail. After I have this problem there's a crash file in ~Library/Preferences called 'com.apple.iLifeAssetManagement.crqash.plist'. It's cryptic, but it says:
bplist00“_AssetManagmentCrashDetailsKey_AssetManagmentCrashCheckerKey°’
_&AssetManagementAgentProcessInfoDateKey_3AssetManagementAgentProcessInfoProcess IdentifierKey_0AssetManagementAgentProcessInfoSupportsDeleteKey_7AssetManagement AgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAgentProcessInfoExecuta blePathKey3A∑Ëô¿U∞y— _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAge nt.app/Contents/MacOS/PhotoStreamAgent÷_&AssetManagementAgentProcessInfoDateKey_ 3AssetManagementAgentProcessInfoProcessIdentifierKey_0AssetManagementAgentProces sInfoSupportsDeleteKey_<AssetManagementAgentProcessInfoSupportsSharedStreamsVide oKey_7AssetManagementAgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAg entProcessInfoExecutablePathKey3A∏Ü“@Ôx î _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStre amAgent.app/Contents/MacOS/PhotoStreamAgent
π

Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

After I upgraded to Firefox 5 for Mac, I have problems logging into our FileMaker Pro database.

After I upgraded to Firefox 5 for Mac, I have problems logging into our FileMaker Pro database. When I type in my Account Name and Password and click Login, Firefox just refreshes back to the blank login window.

Hi All,
Any help?
No one has any answers here amoungst all this apple knowledge?
Thank you

I am have a problem log into my iTunes account it tell me to verify but not send to my email

I am have a problem log into my iTunes account it tell me to verify but not send to my email

Hi Pat. Thank you for the response. I wanted to use the acrobat pdf to word transfer service. I am from London, Uk and I am visiting Cape Town, South Africa. I need for tickets purposes a document which is in PDF but need to work on it and transfer it to WORD as they do not accept any other format. Its all good I opened a new account and have now transferred the file. Thank you for the prompt response.

Problem logging into creative cloud for updates - Unknown server error

Problem logging into creative cloud for updates - Unknown server error working fine with my laptop but this error comes up everytime I try to update adbobe cloud programs on my main PC?

Try this article and check if that helps. http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
Else, download CC desktop app again from CC website.

Problem logging into adobe from Photoshop...

When I am trying to log into my adobe account from Photoshop, I am getting an Error 400? Is anyone else having this problem?

Thank you very much for the reply. I don't use photoshop usually and was just wanting to play with some things on it so its not a big deal to me was just curious. Anyway, thanks for the info. Have a good night
Thanks,Amber
Date: Sat, 2 Nov 2013 14:15:44 -0700
From: [email protected]
To: [email protected]
Subject: Problem logging into adobe from Photoshop...
    Re: Problem logging into adobe from Photoshop...
    created by Barbara B. in Photoshop Elements - View the full discussion
If you are talking about photoshop.com, anyone who tries will get that error because there is no more photoshop.com. You should have received a bunch of emails about any photos there getting moved to Revel, but you can't use Revel from within the versions of PSE that had photoshop.com:
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-40 4/
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5809632#5809632
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5809632#5809632
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5809632#5809632. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems logging into OSX mountain lion

I have problems logging into OS X mountain lion. I have an earlier intel based imac. I don't know how to get out of my authorized ID password login page.

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

Problem logging into icloud on windows vista

i am unable to log into the icloud on my windows vista ....can some one help me....the password is correct so is the id..

what is the error message ? If it says you need to wait or something like a Server error, then it might just be that Apple's servers are struggling. happens often this times as it is a new service that everybody wants to use. Tons of data..

Problem logging into windows user account

Hi, I have been using the fingerprint reader for logging into my user account but recently it has stopped working.I had setup a windows login password earlier and I remember it but when I try to login it never asks for the windows login password. I am only given two options to login, either using the fingerprint reader or a card. I have another user account I am able to access but it does not have the administrator priviledges. Please can you assist me in logging in using my windows password. Thanks for any help you can provide.

I got around to doing a basic test, and was able to successfully grab data from a camera through IMAQ and store it to the disk without needing to log in. The service launched at boot and stored plenty of data before I got the chance to log in.

I can't log into icloud from my Windows 8 PC, but I can from my Windows XP PC

I had my old Vista PC upgraded to Windows 8. I just tried to log into www.icloud.com, but after entering my username and my password nothing happens. No errors, nor messages. Fortunately, I can remotely log into my work PC which is a Windows XP. Logging in is no problem at all for my XP. I get in and do what I need to do. This would seem to eliminate a server issue.
Is the icloud website not available for Windows 8?
Thank you!

Have you tried in another Browser ?

Problem logging into sqlplus

Hi,
I am having a strange problem with sql*plus...
I installed Oracle database 10g release 2 and then logged into sqlplus as sys user from the windows command line and everything seemed fine. Later I installed oracle http server from the 10g companion cd and now logging into sqlplus as sys user from the windows terminal from where i logged on before, works fine, but if I open a new terminal and try to log into sqlplus as sys user from there, I get the following error...ora-01031: insufficient privileges.
i noticed that from the first terminal, it logs into sqlplus release 10.2.0.1.0 but from the new terminal it logs into sqlplus release 10.1.0.3.0.
Does anyone know how this came about? I only have the database release 2 installed and not release 1.
Thanks.

I am unable to connect to SQL plus after installing oracle 10g
what username and password I should use to connect to SQL Server for the first time?
I am new to oracle. Please help me...if I need to set anything from command prompt?
Thanks in Advance,
Regards,
Lakshmi

Windows 8.1 Pro cannot log into RemoteApp running on Windows Server 2012 R2

I have setup a vm running Windows Server 2012 R2 Standard and have enabled multiple RemoteApps. Everything is setup correctly and I can use RD Web Access to access the portal and connect to the remoteapps from any computer except my own. I am
running Windows 8.1 Pro and when I log into the RD Web Access portal, click on one of the apps, it looks like it's loading the session, but gets stuck on Preparing Windows. Everything else up to that point looks like it loads correctly, (i.e. -
Applying Group Policy Settings, applying desktop, etc...). When I log into my Windows 7 dev machine, I can access and run everything just fine. So there must be something between the Windows 8 and 2012 that isn't working quite right.
I have tried logging into the portal as myself and test users...same result.
any ideas?
Jon Wooten

i think there is something in your GPOs or collection settings causing an issue
this happens with any remote app, built-in stuff like notepad or just third party apps?
try not doing any kind of printer/device redirection from that host
you can also do winlogon logging to get a better idea of what's going on during the logon operation
you can also use the verbose logon messages GPO to get detailed login status info
if all else fails I think you need to isolate it by creating a test collection and test user with the bare minimum options

Problem logging into Workflow Designer

Hi,
here is my problem. Workflow 7.0 is installed on W2k3 EE (with Forms and Form Manager) via turnkey installation ( and is on Jboss of course). I've got four other computers in domain. All with XP. And only from one i can login into Workflow Designer. All computers has access to server (with workflow installed), and to server with AD. Workflow is integrated with LDAP (i see new users added in AD after synchronization). And the problem is: that i can log into workflow designer only from one computer. And on all users that have process developer rights i can also log (on that one and only computer). On all other computers i got the following error:
java.lang.reflect.UndeclaredThrowableException
at $Proxy1.login(Unknown Source)
at com.adobe.workflow.client.QLCSessionImpl.login(QLCSessionImpl.java:116)
at com.adobe.workflow.saf.SAFLoginDialog$3.run(SAFLoginDialog.java:122)
Caused by: java.io.InvalidObjectException: inauthentic principal assertion
at com.adobe.idp.Context.getValidatedAuthResultFromAssertion(Context.java:291)
at com.adobe.idp.Context.readResolve(Context.java:246)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at java.io.ObjectStreamClass.invokeReadResolve(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at java.rmi.MarshalledObject.get(Unknown Source)
at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:136)
at org.jboss.invocation.MarshallingInvokerInterceptor.invoke(MarshallingInvokerInterceptor.j ava:67)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:53)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:1 00)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:85)
... 3 more
com.adobe.workflow.client.QLCException: Login failed, or you do not have permissions to login to this application
at com.adobe.workflow.client.QLCSessionImpl.login(QLCSessionImpl.java:126)
at com.adobe.workflow.saf.SAFLoginDialog$3.run(SAFLoginDialog.java:122)
I've tryied reinstalling system, jdk, workflow designer and nothing helped.
Maybe someone has any clue.
Regards

Hi,
Howard's first post:
1 - i can't log as administrator/password from any other machine than my
2 - all the machines can ping server by name and by ip
3 - i don't know anything about that patch (so didn't install)
4 - yes
5 - yes, they are identical
Howard's second post:
that is from where i took the error message
Mr. Style's post:
i compared the size of workflow designer on my machine and on other and
EUREKA, they are different, also i got some extra directories in workflow designer directory (but this is because of using janel trick), so i copy all extra directories and workflow designer exe to other machines and now it's working.
Thank You Mr. Styles.
ps. still don't know how to check workflow designer version and from where i got different version on my machines (i was sure that i installed from one archive)

Problem logging into essbase studio in windows 7 -64bit-

Similar Messages

Maybe you are looking for