Problem Logging it to Int Rep and Int Dir of SAP XI
Hi,
I m using SAP XI 3.0, I am maintaing 2 systems, one as server and one as client. In the client system I have installed J2e engine and SAP GUI. I have problem logging in to Integration rep and Int Dir in the Client system. I have no logging problem in SERVER, but I have in Client system.
So pls help me in this regard....
!!!THANKS IN ADVANCE!!
Sunil Shetty
Hi,
If its a problem in the exchange profile, then how is it possible to log in to the SAP XI Server, which is having the same use name and password.
User Name and Pass Word of Server System is Same as the Client system.I can log in to the server but I am unable to log in to client system which is another system.
Thanks in advance.
Sunil Shetty
Similar Messages
-
Can someone tell me what the difference is between an integer object instead of an int val? I'm working with a IntList where I have to change the program so that the nodes hold an integer object rather than an int val? So if I have this example:
public void addToEnd(int val)
IntNode newnode = new IntNode(val,null);
//if list is empty, this will be the only node in it
if (list == null)
list = newnode;
else
//make temp point to last thing in list
IntNode temp = list;
while (temp.next != null)
temp = temp.next;
//link new node into list
temp.next = newnode;
count++;
}...would I have to merely specify the following -
public void addToEnd(int object)
IntNode newnode = new IntNode(val,object);I don't know what the object really does, so if I'm merely just switching int val to object, what's the purpose of all that?Can someone tell me what the difference is between an
integer object instead of an int val? I'm working
with a IntList where I have to change the program so
that the nodes hold an integer object rather than an
int val? So if I have this example:
public void addToEnd(int val)
IntNode newnode = new IntNode(val,null);
//if list is empty, this will be the only node in
n it
if (list == null)
list = newnode;
else
//make temp point to last thing in list
IntNode temp = list;
while (temp.next != null)
temp = temp.next;
//link new node into list
temp.next = newnode;
count++;
}...would I have to merely specify the following -
public void addToEnd(int object)
IntNode newnode = new IntNode(val,object);I don't know what the object really does, so if I'm
merely just switching int val to object, what's the
purpose of all that?Are you aware of Type-Wrapper Class? Hi Jeff!
Thank you. -Ronillo -
Unable to log into itunes store (0x80092013) and update problems
I am having problems logging into the itunes store using itunes 10.6.0.40 in Wndows 7 in the uk which results in the error message shown below:
'We could not complete your itunes store request. An unknown error occurred (0x80092013). There was an error in the itunes store please try again later"
However, I am able to browse the itunes store without any problems (this does not require logging in).
In addition selecting the menu item Help > Check for updates in itunes results in the message "The itunes server could not be contacted. Please check your internet connection or try again later'
I also have two ipods and an ipad and clicking on the <Check For Update> button on each of them within itunes results in the error message "The ipod update server could not be contacted. Make sure your network settings are correct and your network connectivity is active or try again later".
In trying to fix the above problems I have tried the following:
Re-installed itunes
Ran ipconfig /flushdns
Changed my dns entries to use dynamic dns entries and also tried googles settings (8.8.8.8 and 8.8.4.4)
Put entries in the hosts file for gs.apple.com etc
Reset the winsock using the command netsh winsock reset
Turned Norton smart firewall off completely
Ensured interent settings were set to 'Check for server certificate revocation' was unticked and "SSL 3.0" and "TLS 1.0." were both ticked
General internet connectivity is working fine it is just itunes where the problems are.
I can also log onto the itunes store from the ipad itself without a problem.
I also have a Windows Vista laptop which can connect to the itunes store without a problem and can also run the menu item Help > Check for updates and results in a message saying itunes is the latest version. This also runs Norton Smart Firewall and is having no problems. So I am assuming from this that my setup is not at fault and it is not an isp issue.
I have also noticed that a number of other people are reporting problems logging into the itunes store and also error 0x80092013.
The results of an itunes diagnostic test (Help > Run Diagnostics) are shown below (this shows that the itunes store can be browsed but attempts at prurchasing etc cannot be completed)
Microsoft Windows 7 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.6.0.40
QuickTime 7.7.1
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012AF0402B0FA18
Current user is an administrator.
The current local date and time is 2012-03-11 18:01:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., ATI Radeon HD 4870
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {46932D17-49B1-4170-9CA8-EA1A00438097}
Description: Microsoft Loopback Adapter
IP Address: 169.254.183.23
Subnet Mask: 255.255.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server: 0.0.0.0
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {58D508FD-AACB-4B61-B19B-D91F9FD1F400}
Description: Bluetooth Device (Personal Area Network) #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {4C3DB141-4DA2-4484-A598-E5B7ACD6E684}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller(NDIS6.20)
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Mar 11 17:05:46 2012
Lease Expires: Sun Mar 11 17:05:45 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to iPhone activation server was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to firmware update server was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-03-11 17:58:25.I have spoken directly with Apple over the last couple of hours. They are aware of the problem and are going to ask their engineering department to investigate. It is perhaps not a big priority at the moment as they say they only have 30 confirmed reports of the issue worldwide.
Is it possible that there are other people who are having the same problem and are watching the forums waiting for answers? If so, please report the problem. This is the only way for Apple to understand the scale of the problem (if indeed it is a big problem) and to be able to escalate the issue and allocate suitable resources. The issue we are seeing is:
I mentioned what you said about downgrading - I have also contemplated this but I am expecting I will need to run 10.6 for HD media and syncing with the new iPad. Apple agree downgrading is not an acceptable solution, and there must be a way forward, but if you dont need 10.6 then why not downgrade until the problems are resolved.
My take on the problem is this:
The error code is the same as a Windows error code that suggests the issue is with accessing the certificate revovation lists (CRL). iTunes 10.6 is a signed application that needs to access a CRL to determine whether its certificate is still active. iTunes own diagnostic tool points in the same direction too. The network connectivity test (see image below) shows the network interface and internet connection are fine. It is just the secure link that is failing. It is possible to view the apple store, and download podcasts etc.. but it is not possible to sign into an account or make purchases.
One person has replied to many of these postings suggesting the problem can be fixed by updating DNS settings, which could add weight to this theory. The person who posted this didnt explain why this worked for them, but if DNS settings have not propogated fully for a new CRL this could be causing problems for some users. If so this could just fix itself in the coming days, or it may work if you can connect to the internet from a different connection like a public wifi hotspot.
I will post updates if I get anywhere or hear anything back from Apple. -
15 int digits and 3 decimal digits number problem in CR for VS 2005
Post Author: condeagustin
CA Forum: Crystal Reports
HiIm using the Crystal Reports that comes with VS 2005 and I'm having a problem showing a number with 15 int digits and 3 decimal digits. In my tests, for example I have a formula that only has this line of code: 356125478123456.251I want the report to show 356,125,478,123,456.251 but it shows 356,125,478,123,456.000Why does CR puts 000 when it has to be a 251!!! WHY?!!!! I have tried to put the number as a string and I have tried a lot of functions like Round, Truncate, ToText, CDbl, etc and it's always the same result. In the format object of that formula the decimals are 1.000 and the rounding is 0.001. And the following is the weirdest part:If, instead of 356125478123456.251 I put 56125478123456.251, CR shows 56,125,478,123,456.300If then I put 6125478123456.251 CR shows 6,125,478,123,456.250And then if I put 125478123456.251 CR SUCCESFULLY shows 125,478,123,456.251 That is the way I want it but with 15 int digits. It looks like CR only works with a maximum of 12 int digits, more than that, the decimals don't work. How can I fix this? Please help me!Kind regards,Agustín CondePost Author: Ken Wong
CA Forum: Crystal Reports
Hi Agustin,
Crystal Reports uses signed doubles as its datatype for numbers. A signed double on a 32 bit machine is represented by 8 bytes. 1 sign bit, 11 exponent bit, and 52 bit for the mantissa. This roughly corresponds to 15 digits of total precision in decimal; ie. it does not matter where your dot is. You have 15 digits before and after the decimal point combined.
This behavior is pretty standard. You should see similar behavior in applications such as excel.
Hope this helps,
Ken -
IBM WPS: Error While Creating App and Int Server Connections in JDev 10g
Hi,
I have been struggling to create App Server and Int Server connections in JDeveloper 10.1.3.4 without any luck.
The JDeveloper is present on VM ware machine from which I'm trying to establish the connections to remote server where SOA Suite 10g is installed on IBM Websphere.
My Settings:
App Server:
Connection Type: Standalone OC4J 10.1.3
RMI: tried WC_defaulthost port, 6003, RMI default port (How do I get the actual value of RMI on IBM Websphere and does this really make a difference?)
Connection test fails with Mbean error. Ignored this error as documented in Installation guide.
Int Server:
Used the above App Server connection, gave the http port value of 9700 (also the WC_defaulthost on IBM Websphere)
Connection test fails for App Server, BPEL PM Server and ESB Server.
I have gone through other threads where different workarounds were suggested but none of them worked for me. The workaround of adding the property ipaddr with the value 0.0.0.0 in opmn.xml doesn't hold good here as IBM WPS doesn't have OPMN.
Please suggest a working solution for this issue.
Regards,
CCThe below message comes when you don't specify any default file for your webcenter portal application and this should not be any problem.
Target Portal.jpr is not runnable, using default target index.html.
Can you answer to my questions:
1. Did you just created a new wcp application in jdev and ran it with out doing any changes? If you have done what are the changes?
2. How did you ran your application? (right clicking a particular page or right clicking your portal project and selected "run" option? -
Planned cost for int labour and non stockable material not visible
Hey gurus,
While creating an order with a material, ext service, non stock material, I am able to see the planned cost for materials in stock and ext services procured. But i'm not able to see the planned cost for non stock material and int labour. However i'm able to see the actual cost for all the items. I think I have missed some config. Please help.
Regards,
AbhishekHi,
As said by Pithan there is a problem in costing variant for planned cost which you have assigned to prder type at plant level.
Problem underlies within valuation variant assigned to costing variant.PM01 is your costing variant here.Check diiferent heads within valuation variant for this costing variant.There under activities tab what is calculation parameter you have selected.If it is blank you will not get any internal activity cost.You need to select at least one from dropdown like cost from previous period or avaerage cost etc.Then you will get planned cost for internal activities.SAmething applies to non stock material.
Check in OKP6 for all these and make sure that you have selected at least one cost calculation schema there for activities and material and external.
Regds,
atul -
Operator + cannot be applied to operands of type 'method group and 'int'
Hello I have a problem that I'm trying to fire a bullet everytime I pressed the spacebar key, but I have this problem that is cropping up.
if ((e.KeyCode == Keys.Space) && (playerOne.Bullet.Alive == false))
playerOne.Bullet.Alive = true;
playerOne.Bullet.getX = playerOne.getXposition + 15;
playerOne.Bullet.getY = playerOne.getYposition + 10;
It says in the error list: "Opeartor '+' cannot be applied to operands of type 'method group' and 'int'", I have no clue. I'm also new to programming.I want to get the bullet to shoot where the player is, here is the code:
class Player
// attributes here - Int other words data types and variables:
int health = 3;
float xPosition;
float yPosition;
Bitmap playerGraphics;
int score = 0;
bool leftPressed;
bool rightPressed;
float Width = 50;
public Bullet Bullet = new Bullet();
// functions here:
public void Init()
// Get Player_Bat.png from resources, so that we can work with it:
playerGraphics = new Bitmap(Green_Aliens.Properties.Resources.Player_Bat);
health = 3;
score = 0;
xPosition = 375;
yPosition = 540;
leftPressed = false;
rightPressed = false;
Bullet Bullet = new Bullet();
public float getWidth()
return Width;
public void toggleLeftPressed()
if (leftPressed == true)
leftPressed = false;
else
leftPressed = true;
public void toggleRightPressed()
if (rightPressed == true)
rightPressed = false;
else
rightPressed = true;
public bool getLeftPressed()
return leftPressed;
public bool getRightpressed()
return rightPressed;
public Bitmap getGraphics()
return playerGraphics;
public float getXposition()
return xPosition;
public float getYposition()
return yPosition;
public int getHealth()
return health;
public int getScore()
return score;
public void moveLeft()
xPosition -= 10;
public void moveRight()
xPosition += 10;
public void loseLife()
health--;
public void adScore(int valueAdd)
score += valueAdd;
//Resets the player to the start position:
public void resetPosition()
xPosition = 400;
yPosition = 550; -
Hi all, I'm sure this is a stupid question but I wanna check anyway.
I'm trying to make a "nice" implementation of the Class getColumnClass(int col) method of an AbstractTableModel, and have a question:
In the following examples ii would be a member of a class representing the structure of a row in the database table. This code works as I expect:
Integer ii = new Integer(0);
return ii.getClass();This code doesn't compile:
int ii = 0;
return ii.getClass();Did I miss something here? "int" isn't an "Object"?Hi guys,
Thanks for the replies.
I had been wondering about the difference betweem int.class and Integer.TYPE... I ended up going with the .class versions.
My original thought was that since I have already declared an instance variable, I should just be able to query the variable to get it's class for the table model to use. However, I was foiled in two regards...
1. I was using primitive datatypes, which don't have a .class member or getClass() method.
2. It seems that you can only query the class for an instantiated variable. I had wanted to do this from a static function because at the time of initializing the table model, I hadn't actually populated the row cache.
In the case of 1. above, perhaps I can use Integer instead of int, but I don't know if there are any other issues or problems associated with this. I want to use the row structure members as bind variables in SQL statements (as opposed to concatenating string values to make a fresh SQL statement each time). I have no idea if it works, have to try it I guess.
In the case of 2. it may be that a different syntax would solve the problem, if anyone has any suggestions, please let me know.
In the meantime, my function looks like this:
public static Class getColumnClass(int tableCol) {
switch (tableCol) {
case 0: return Integer.class;
case 1: return Integer.class;
case 2: return String.class;
case 3: return String.class;
case 4: return Double.class;
case 5: return Integer.class;
case 6: return Integer.class;
case 7: return Integer.class;
case 8: return Date.class;
Workable, but none too sophisticated. -
String to Int and Int to String
How can I convert a string to Int & and an Int to String ?
Say I've
String abc="234"
and I want the "int" value of "abc", how do I do it ?
Pl. help.String.valueOf(int) takes an int and returns a string.
Integer.parseInt(str) takes a string, returns an int.
For all the others long, double, hex etc. RTFM :) -
Hi,
So I keep having problems logging onto the iTunes store in iTunes where an error message pops up saying: "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80090318) Make sure your network connection is active and try again."
How do I fix this?Hey thatssoivi,
If you are having an issue with being unable to connect to the iTunes store, I would suggest that you troubleshoot using the steps in this article -
iTunes for Windows: iTunes Store connection troubleshooting - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L -
Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions. When I click to accept the terms and conditions, nothing happens and the editor fails to open. Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open. Any advice?
Premiere Elements 10 is now 64 bit, but not PSE10.
Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
Click image to enlarge
Turn off face recognition and the auto-analyzer to improve performance.
When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed. -
How to read a C structure with string and int with a java server using sock
I ve made a C agent returning some information and I want to get them with my java server. I ve settled communication with connected socket but I m only able to read strings.
I want to know how can I read strings and int with the same stream because they are sent at the same time:
C pgm sent structure :
char* chaine1;
char* chaine2;
int nb1;
int nb2;
I want to read this with my java stream I know readline methode to get the first two string but after two readline how should I do to get the two int values ?
Any idea would be a good help...
thanks.
Nicolas (France)Does the server sent the ints in little endian or big endian format?
The class java.io.DataInputStream (with the method readInt()) can be used to read ints as binary from the stream - see if you can use it. -
How to divide two int numbers and get a fraction ?
I am dividing two int numbers and the result should be a fraction but I am always getting a zero
set @result= @num1/@num2
when num1=50 and num2=100I am dividing two int numbers and the result should be a fraction but I am always getting a zero
set @result= @num1/@num2
You can either one of the values as a decimal or float type, or just multiply one of the values by 1.0.
set @result= @num1/@num2*1.0
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
Megacom not working for both LD and Int'l
I got the same issue described here https://supportforums.cisco.com/message/311063#311063 but only differences are my setup is using CCM 4.2 and Cisco 3845's.
To make a LD call to work, I got to set the "Called party IE number type" under the GW config to National; and
To make an Int'l call to work, I got to set this value to International.
If I leave everything default, i.e. Cisco CallManager, only LD works.
Basically, I couldn't make both LD and Int'l to work. It's either one way or the other.
Any workaround to make both to work would be greatly appreciated.
Thanks,
KevinBoth device has automatic download on.
-
New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!
Maybe you are looking for
-
Signals drop on iPhone 5s iOS 8.1 both wifi and network
I am having the following problems since i updated to iOS 8.1 on my iPhone 5s 16GB model A1533 : 1- My network signals drop to 3 dots and sometimes to 2 and stay there. 2- Sometimes my wifi disconnects itself on my iphone for almost 4 or 5 seconds 3-
-
How do I get an olsa ro applet to work on my MacBook?
I'm trying to get an applet to launch from skillport and it opens another windo with the title OLSA RO Applet. On the page it says "skillport Please wait...." then nothing happens. Please help!
-
Hello all I am in need of some help. I have a crosstab that I am trying to get a moving average at the bottom of the report. Current my crosstab is counting how many titles were completed in a week, columns show the week beginning, rows show the stag
-
We have designed a Sales Quote Output Form using ADLC for SAP Cloud for Customer (C4C). We need to print both header and item level price details like Unit Price, Tax%, Tax Amount, Discount %, Discount value on the output form. We are now struggling
-
I moved it to applications and then to the desk top icon for firefox. When I open Firefox it tells me that I need the new version. Is there a new version everyday?