Problem LSMW + IDOC method for message type : MATMAS

hi friends,
I am using LSMW + IDOC method Message : MATMAS , idoc type : MATMAS03 .Setting every thing are fine. Finally Material is not created with error "message have been issued number : <idoc number>".
data : material, industry type, material type, description, Basic unit of mesure.
Please help me.
Balaji.T.

Hi,
I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
Regards,
Klaus

Similar Messages

1 request Idocs created for message type MATMAS

Hi Experts
I have done necessary config.
I have attempted BD10 and BD11.
I have got message that "1 request Idocs created for message type MATMAS"
But iam unable to find the material in target system.
Please suggest what need to be done.
regards
ramSiva

Marias,
And in PI, after having changed the password (why not), have you unlock this user account ? in SU01 of PI, you have a lock button.
if you did it, and changed also the password, as explained, you have perhaps another (or several) program like a RFC destination which uses another password, and so after some exchanges... with a bad/old password, you have your message "too many...", and then the user is again locked...
If you change the password in PI, you should change it in all application which uses this user. I hope you have not the same user from ECC to PI, than from a third-party to PI...
that's why: the use of such technical users have to be referenced in a doc. By this way, if password has to modifiy, we know where we have to update it (mainly in different RFC destination).
Mickael
Edited by: Mickael Huchet on Dec 5, 2011 5:33 PM

Error MSG : Create a partner profile for message type 'MATMAS'

Getting Error MSG : Create a partner profile for message type 'MATMAS'
While running LSMW Idoc generation process

See the below link and it has all screen shots how to configure ALE like partner profile,logical systems,RFC
http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html

Issues in using LSMW IDOC method for Article Hierarchy

Hi Experts,
I am working on a scenario for uploading article hierarchy using LSMW idoc method.
Details:
Message type WMATGRP
IDoc type WMATGRP01
But as per my understanig, for processing, there should be a inbound Function module/Process code. But I am unable to find out any process code for this in tcode WE42/We60.
Could you please help in this problem.
Regards
Krishan Kumar

Hi Saeed,
For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
Regards,
Madhu.

How to send IDOC with extended message type MATMAS

Hi Experts,
I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that.
Can i use BAPI also for such work, if then how it can be helpful.
If anyone have any other solution Please help me out of this.
Regards,
Nik

Hi Mahesh,
Thanks for your reply.
My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
That means for few selected materials there will be few PR's which may be open, i have to show those in my report.
Eg: material A, B. are in PR 00001 & material B, C in PR 00002.
After selecting materials A to C report will show
Material                 PR No                   Item No                Quantity
A                           00001                    10                             1
B                           00001                     20                            3
B                           00002                     10                            3
C                           00002                      10                           1
Same thing i have to do for open PO & open Sales order also.
Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
Regards,
Nik

IDOC reduction for MSG type MATMAS

HI all,
i have a requirement where clients need only some standard segments and some particulars staructure.We are using MATMAS as a message type and MATMAS05 as a basic type.Basically it leads us for IDOC reduction. Can someone pls help me out for getting this requirement.
Rgds,
Raghav
Edited by: raghav on Jun 9, 2009 12:28 PM

Hi,
Launch the BD53 transaction (IDoc Reduction Maintenance: Initial Screen). In the Reduced message type field, type the value ZVISTAPM_REDUCED, then press the Create button. In the popup window which appears, type in the Message type reference field the value MATMAS.
Validate.
In the next popup window, type a short description for the new reduced message type.
Validate.
In the following window, select the segments and the fields needed for the new reduced message type.
Save.
KR Jaideep,

Idoc generation for message types

Hi All,
regarding IDOC generation....
how do we activate the message type so that every time the application data which is created or changed or deleted generates the idoc and send it to other system. If iam not using Chnage pointers technique then i would not be activating the message type in BD50. In such case ie if the message type is not present in BD50 list and if change pointers is not used to transfer that message type . How do we genrate the idoc for such message types.
Thanks
Avinash

Hi,
For ur scenario u need to go for change pointers method only.U have other options like distributing master data and transactional data..But i don't think anything otherthan change pointers is useful.
Regards,
Nagaraj

Create Purchase info record using LSMW idoc method

Hello Friends,
I am trying to update Purchase Info records using LSMW Standard program RM06IBI0.
But it is not updating the condition price details and scale Quantity.
For that the form suggessted LSMW IDOC method. with : Message Type         COND_A / COND_A02.
But i dont know is the info record created earlier to this step or else we can create both using this method
at a time ? Does anybody please suggest.
( Actually Purchase Info record created using transaction ME11 ).
Regards,
Phaneendra

you first create the info record and subsequently you load the conditions.
become familiar with the condition tables and its key first. Check How table A017 and A018 are maintained.
Intresting is the field VAKEY which is actually the link to your info record.
This is a combination of vendor, material, purchasing org, plant , and info record indicator.
data: begin of ZZVARKEYA,
        ZLIFNR like LFM1-LIFNR,
        ZMATNR like MARc-MATNR,
        ZEKORG like LFM1-EKORG,
        ZWERKS like MARC-WERKS,
        ZINFTYP like EINE-ESOKZ,
        end of zzvarkeyA.

Inbound problem for message type WPUUMS

Dear all,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun

You have to analyze where exactly the problem is.
There are several reasons why the Idoc did not post:
1) The Data you are sending to post document may be wrong. You may have to validate against valid data in Database.
2) Thre may be some mandatory data which you are not passing through IDoc (Idoc data may be missing).
It is not possible to answer a generic question like this with perfect answer.
Best way is to debug and find out why exactly the problem is, if you know the error message (you may see it in Status record of this IDoc).

Application logs for log handling in lsmw idoc method

Hi Abapers,
Im using LSMW IDOC method for data transfer from legacy to sap system.Now the requirement is to handle application logs for log handling i.e i have to make use of custom report to handle logs,can any one tell me what all steps to be done for this or if any one can share a link related to application logs would be greatly appreciated.
Thanks.
Edited by: saeed.abap on Dec 27, 2011 5:13 PM

Hi Saeed,
Please check with this fms
1) BAL_DSP_LOG_DISPLA
2) APPL_LOG_READ_DB
3) IDOC_GET_MESSAGE_ATTRIBUTE
There is a wiki [Error Log Lsmw|http://wiki.sdn.sap.com/wiki/display/Snippets/ErrorLogProgramforBAPIandIDocMethodin+LSMW] available.
Regards,
Madhu.
Edited by: madhurao123 on Dec 28, 2011 8:25 AM

Vendor Address is not updating in ADRC table by LSMW IDOC method

Hi,
I'm updating Vendor address data by LSMW IDoc method
for this i'm using ADRMAS as msg type and ADRMAS02 as Idoc type.
In partner profiles Process code given as BAPI for this.
i maintained entry in TSADOBJ table LFA1 as OBJTYPE,1 as ADDR TYPE,0001 as context,LFA1 as TABLENAME,ADRNR as FIELDNAME, ADRC as TABLE PERS, ADDRNUMBER as FIELD PERS
Idoc generating sucessfully.
But data is not updating in database.
i think the problem in TSADOBJ config.
Please give exact configuration which can update vendor data.
Thanks in advance

be open minded. SAP gives several import methods to load vendors. one of them is per IDOC.
But the vendor master IDOC does not automatically create the adress master.
And even more important, if you migrate data from one SAP system to another, the IDOC method is more straight forward than the batch input, because you can send the IDOCs from legacy system to new system, you will then have a 1:1 relation of the structure in LSMW and you can create vendor masters by knowing the new vendor number from an internal number range already in LSMW, long before you actually post the vendor. With batch input you can either post with numbers from external number range, or you just dont know the new number already in LSMW.
And you dont need to download the data to Excel. And further, the LFA1 adress data has less information than the ADRC adress data.

Could not determine recipients for message type ACLPAY

Dear friends,
I am getting error while doing Invoice Verification as "Could not determine recipients for message type ACLPAY"
Please advice how to resolve this issue.
Thanks

Hi
This is IDOC settings for message type ACLPAY there is no receipient please check transaction code WE20 and please get in touch with your technical team
Thanks & Regards
Phaneendra

LSMW: ALE/IDOC, getting the Create a partner profile for message type

Hi Gurus,
In my current project, i need to upload the employee data using the ALE/IDOC method with the LSMW
when i'm generating the idoc in the 13th step, its posing the information message stating that:
Create a partner profile for message type 'ZEMP_MSG'
In partner profile i already assigned the message type .
How to solve this issue, <inappropriate urgency removed by moderator>
Thnks&regards,
sree
Edited by: Thomas Zloch on May 13, 2011 9:55 AM

This forum's aim is not only to search for information and ask the members questions, but also to share knowledge. When you have asked a question and found a solution, do share with the rest.

Document type not defined in lsmw idoc method

hello iam posting Open AR Line Items for contract account using message type
CTRACDOCUMENT_CREATE using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the problem.
Regards
priya

Check OMW9, here document type is defined for the transaction MIRO..
Go to OMW9, click in the Document Type.
Then double click on MIRO.
Also check the sap notes which is referred in the similar thread Document type not defined f5814

Vk11 pricing conditions for LSMW IDOC method...

Hi Guru's,
I am working on LSMW Idoc method. For Pricng conditions
i am using Message type 'COND_A' and basic type 'COND_A04' .
when we execute 14th step Idoc generation. I am Facing some problem like its displaying information message
' Partner type does not exist with the name ,'TYPE'.
like this iam facing some problem.
I already created partner profile in we20 clearly..
This is the different requireent ,i never faced this problem earlier.
Can any body help me in this regard.
Regards
Jayan Jalla,

Hi,
Activate the indbound settings in the LSMW by pressing the button
'Activate Idoc Inbound Processing'.
Regards,
Shan

Problem LSMW + IDOC method for message type : MATMAS

Similar Messages

Maybe you are looking for