Problem lunch illustrator on xp

hi
i have problem with iilustrature cs6

Eyal,
Lunch time over here.
As implied by Lutz, there may be countless reasons, among them being corruption within Illy, missing/disabled Verdana and/Tahoma font families in TTF.
You may also try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up

Similar Messages

Weird Z and Y key swap and arabic filename problems in Illustrator CS3

Hi
I am having some very weird problems with Illustrator CS3.
At completely random times, the software starts to think my Y and Z keys have swapped places. i.e. When I type anything or use any shortcuts, the opposite letters appear and are used.
Also from time to time, when I save a file, the filename is written in Arabic and I have to rename the file again in Explorer to correct this.
Both of these problems are random and a restart or Illustrator usually fixes both of these. But what a pain and waste of time.
Anyone else getting problems like this?
Oh, I'm using Windows Vista.
Thanks
Mr M

My guess is, it is related to Windows. Try to press shift and ctrl at once if the problem occurs. The keys should be switched back...
You have probably installed more than one keyboard in Windows. Shift-ctrl is the standard way to switch between them. You can change this in the Windows keyboard configuration file.
I had this problem with a German and a VS keyboard installed.

Problems with illustrator CS3. loading drawings, swatches everything takes minutes

Since a couple of days the problems started at my office. All pc's started to have problems with illustrator and photoshop. But most of all illustrator. On start-up it is quick as it used to be but when i want to load a drawing, swatch or symbol it takes minutes. I don't know if it has to do with an update or something else. I only know that it started a few days ago on all pc's but not on the mac's.
Thanks in advance,
Bas

What exactly is a few days ago? The last Windows Update was on last Tuesday. Except for a .NET fix and various Office patches it did not seem to have anything critical, but it may be possible that it affects your computers. It's a far cry, though. More likely it's a virus scanner or something with your network settings, that causes erratic file opening behavior. Hard to tell without more info. your description is too generic and vague.
Mylenium

Problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite

I'm currently having problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite. Both applications fail with the message "Installation Failed: The download appears corrupted. Please try again after a few minutes.(-60)".
I've tried uninstalling Illustrator CC and InDesign CC and then reinstalling, but still get the same error message. Other applications in Creative Cloud all install without issues.
Has anyone else experienced this issue and resolved it please?

Sorry for the slow response. My Mac wouldn't boot following a failed Yosemite update. I've since reinstalled Yosemite but the exact same problem persists. My Mac is standalone and not on a managed network.
Thank you for the troubleshooting link. I've tried the recommended fix for the -60 error but it doesn't appear to be possible to download the trial version of Illustrator or InDesign for CC editions. They just trigger the Creative Cloud installer and shortly after the -60 error again.
The problem is still specific to Illustrator and InDesign and I've tried uninstalling all Creative Cloud applications and reinstalling. Every reinstalls except InDesign and Illustrator.

Problems with Illustrator CS2

Argh! Suspected problem with Illustrator CS2...
When I look in the Stroke/Fill boxes for colours, I have no options available to me. All that appears is this: http://www.ioimi.com/images/strokefill.jpg.
Is this normal? All I want to do is selected different colours for the line stroke and fill colour of something I have already drawn using the pen tool.
Also, how do I move or remove rulers once placed and why is it that if I use the arrow keys on the end of a line it moves it more than one pixel? How do I keep a line straight? It's so much easier in photoshop but I need to learn.
Please help...
Thank you!

That is not the Color palette, it is the Swatches palette. It's where pre-mixed colours, gradients, and patterns can be stored and quickly applied. The file you are using has no swatches.
You can add your own by loading swatches from any other Illustrator file or from the libraries that ship with Illustrator. You can also add a swatch by mixing a colour in the Color palette and either dragging the colour onto the Swatches palette or clicking one the New Swatch icon (The page icon next to the trash can).

Problem with illustrator cs5.1

Hello I have a problem with illustrator CS5.1. I have a presentation with 17 artboards. Suddenly, when I openned it, the next picture appeared:
So, when I open the file, there is nothing in it.
¿Could anyone help me, please?

This might help , :- http://forums.adobe.com/thread/320876

Problem installing illustrator cs5 trial

I have downloaded the trial cs5 but when i try to install it i get the following error message. I use vista.
"a problem occurred while ex
tracting some files, please check available space
on computer and the write priveledges on the desination folder"
any help greatly appreciated!

Problem solved - SIMPLE and QUICK solution
I too had similar problems installing Illustrator CS5. It just wouldn't complete the installation. Everything else in the CS5 collection installed fine. I looked around on the internet. Assuming that most people's installation problems originate from the same cause—registry errors, then scanning the registry for errors and correcting them first before rerunning the install should solve the problem. Which is exactly what I did and it worked like a charm.
Once you figure out what the problem is, how to fix it and get the right tools, the rest is easy. This is what I did. It took only a matter of minutes:
I use CCleaner (stands for Crap Cleaner, it's top-notch freeware I've been using for years, I can't recommend it highly enough!) to run a registry scan first. Sure enough, it identified at least one error with Illustrator. I scanned and fixed the errors in a couple of mouse clicks, took seconds.
I then run the CS5 installer again for Illustrator. Miraculously, it installed without a hitch!
You can download CCleaner here: http://www.piriform.com/ccleaner/download (The download link is in the top right corner of the page).
Hope this will help you too.
As a bonus, you will find that CCleaner can do a lot of wonderful maintenance stuff for your PC!

Text problems with Illustrator CS6

Hello. We are having problems with text in Illustrator CS6. 1. When we copy / paste text within illustrator all color information is lost. 2. When we save documents in Illustrator CS6 then re-open text with color attributes changes to different random colors!! For example: If we save an Illustrator document with a paragraph of text that is part red and part black when we re-open the same paragraph might be all gray, or orange or (you pick a color). Can anyone help us here as this is causing no end of grief. Mac OSX 10.8.2

As promised. This is the response received from iClipboard re the text color problems with Illustrator CS6.
"Sounds like an Adobe problem especially given their last fix which changed how they worked with the system clipboard. We don't mess with any of the data put on the system clipboard. We simply make an exact copy of it and store it in iClipboard. It's a READ operation, not a WRITE operation so no data on the clipboard is changed. We use standard Apple API's to do all of this (proof is that iClipboard is in the Mac App Store--Apple's review process doesn't allow undocumented API calls)."
My thanks to the people at iClipboard however the problem still exists. I'll sum up the issue this way. I have created a paragraph of text in Illustrator that combines black text with red text. I copy then paste the text with iClipboard running and the pasted text is all black. I copy then paste the text with iClipboard disabled and the copied text maintains the color information. When I save the Illustrator document with iClipboard running then reopen the black / red text reopens as grey / orange. With iClipboard disabled the reopened document is fine - go figure. The problems only occur with text - images are fine though they were a problem with the first version of Illustrator CS6. Anyone got any suggestions??

Problem Mit Illustrator

Hallo,
ich habe ein kleines aber unschönes Problem mit Illustrator. Ich möchte mir Illustrator eine Broschüre erstellen, klappt auch alles gut, und ist auch so weit fertig. Nun habe ich auf der startseite ein Hintergrundbild, oben und unten eine Welle und über der Welle ein Bild.
Das bild, welches über die welle geht, habe ich vorher freigestellt. Nun habe ich aber an der stelle, wo das bild über die welle geht, eine weiße Stelle.
Diese stelle sieht man nicht in der aus ID erstellten PDF Datei, nur wenn man diese PDF auf einen Drucker schickt oder lokal als PDF ausdruckt. Wenn man sie auf den Drucker schickt auch nur dann, wenn man alle seiten druckt. Wenn man nur die erste Seite druckt, sieht man diese Stelle nicht.
Das ganze macht mich irgendwie Wahnsinng.
Die AI datei ist folgendermaßen augebaut:
Weiße Hintergrund welle und darüber eine grüne welle + eine "schmale" grüne welle mit einer Transparenz von 30%
Ich hoffe ihr könnt mir helfen.
Anbei die Stelle, die ich meine. Man kann gut sehen, dass das bild in dem Grünen bereich einfach weiß wird. In dem weißen bereich (zwischen den beiden grünen) sieht man sogar noch was von dem bild. Für mich macht das ganze keinen sinn.
Gruß
DasPabst

Okay, ich versuche mal alles zu beantworten
Habe die welle in Illustrator und die Broschüre in Indesign gebaut.
Das grün hat den Farbwert CMYK - 31 - 3 - 31 - 0
Überdruckenvorschau ? .. wo finde ich die ...
Die PDF ist als PDF/X-4:2008 Erstellt.
Adobe Illustrator und Indesign
Indesign Version 7.0 CS5 ... Illustrator kann ich gerade nicht sagen ...
Windows 7 x64
Kann es dadurck komme, dass ich in Illustrator transparenz verwendet habe ? sollte ich es mal mit farbton 30% anstatt transparenz 30% versuchen? habe leider Illustrator gerade nicht hier, kann es also nicht testen ...

Problem installing Illustrator CS5.5. because of resolution.

I have a problem installing Illustrator CS5.5. on a laptop with an Intel HD4400. The error message is that the resolution is too low, despite the fact that the resolution is 3200x1800. What to do?

if windows, try compatibility mode. System requirements | Illustrator

Embedding problems in Illustrator CS6

Hi I am having a very strange problem in illustrator and I can't work out what is wrong.
Before in a previous version when I embedded a barcode into an .ai file the barcode was fine but now in my new CS6 the stroke sizes go "mad" and resize?
Is there some sort of setting I am not selecting? I need to embed ALL images / barcodes into the packaging design as I need to send it to china for printing. (and create outlines - but can't do this until the barcode has first been embedded)
thanks

Hi I do the following, which always works for me now:
Select - Edit - preferences - general - tick the "scale strokes and effects" - make sure this is on
File - place - and then just by unclicking the "link" box before I place the barcode image, it brings it in already embedded and then i can resize it and outline as normal.

Problems installing Illustrator

Hi! I am having problems installing Illustrator CS4 from CD onto computer with Windows 8. I keep getting an error message telling me to shut down Bridges before installation can continue. I've gone to my Control Panel and Adobe Bridges is not even listed there. So how can I shut it down to install AI?

You probably want to open the Task Manager to shut it down (Ctrl-Alt-Delete -> Task Manager).
Closing Programs Interfering with Installation
PC - Task Manager: (CTRL-ALT-Delete) http://support.microsoft.com/kb/323527

Two problems of illustrator cc

I really wanna ask some problems in illustrator CC.
I have two questions.
First, Why i can’t move a rectangle with 0.1 pixel as a unit?
there is no problem with other shapes. Just Rectangle.
Even smart guide didn’t work.
Second, there is a crash which is related with Pointer problem.
Illustrator software died!!!!
It happened a lot of times nowadays.
If I didn’t save a project file, my works was disappeared.
I felt so embarrassed and angry whenever i experienced this.
Is it the update problem or my computer problem?
I want to listen your thought.

noizowl,
Concerning the second one, just to make sure, are all the faces of the Verdana and Tahoma fonts installed and enabled/activated through the OS (not font mangement) as TTF (not OTF)?
There is a number of possible reasons, but it may be unrelated to the first issue.
Can you elaborate on related with Pointer problem?
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Problems using illustrator

I downloaded creative cloud and now I'm trying to open a file in illustrator and everytime it opens the file, I get an error message that says illustrator stopped working?!?!?!?! Help!! I really need to update a file in illustrator

I can't even open it. Every time I open Illustrator, it immediately shuts down and say Adobe Illustrator has stopped working. I need to fix this ASAP.
Date: Fri, 28 Feb 2014 01:09:24 -0800
From: [email protected]
To: [email protected]
Subject: Problems using illustrator
    Re: Problems using illustrator
    created by Devendar_kumar in Adobe Creative Cloud - View the full discussion
Hello,
Please try holding Cmd-Opt-Ctrl-Shift when restarting AI on a Mac or Alt-Crtl-Shift on a PC to reset the preferences to the factory defaults.
Now check if you get the same issue, then please create a OS user account and try in that.
Regards,
Devendra
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6165588#6165588
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6165588#6165588
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6165588#6165588. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Salve, ho avuto dei problemi con illustrator inserendo dei file (da "file","inserisci"). Ogni volta che ho provo ad inserire un file si blocca il programma, ho provato a disinstallare e ad installare nuovamente illustrator, ma il problema si è ripresentat

Salve, ho avuto dei problemi con illustrator inserendo dei file (da "file","inserisci"). Ogni volta che ho provo ad inserire un file si blocca il programma, ho provato a disinstallare e ad installare nuovamente illustrator, ma il problema si è ripresentato. Cosa posso fare?

Angelina,
The File>Place (File>Inserisci) works with other formats than AI. Is it another format?
With AI file, you should use File>Open (File>Apri), or copy the desired contents from the original document into the one where you widh to use it. You may need to tick Paste Remembers Layers in the Layers palette flyout/dropdown.
You may use the Translate button at the lower right corner.
Did you reinstall using the full three step way (otherwise strange things may linger)?
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Problem lunch illustrator on xp

Similar Messages

Maybe you are looking for