Problem making the front JFrame active after switch ?

Hi,
I have two JFrames : a full screen JFrame and a little one where I insert some infos ( I use it like a JDialog). The problem is that when my full screen window is the front window, I cannot see the little one anymore; so I made a little Window menu that helps switching from one window to another. I use the show() method to bring the little window to front. This works, but the problem is that this window is not active, it is said I have to click on it to make it active. I also tried to use the toFront() method, but I have not more success unfortunately (I even tried to first invoke the toFront() and then show() and vice versa). Why does this happen and how can I make the window directly active without having to click on it ??
Thanks

Apple released a Java update yesterday and since the update it works like a charm, as it should :) ...

Similar Messages

  • I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

    I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

    If you are dissatisfied with the Service you have received and wish to Contact Apple...
    India
    Start your support request online and we'll connect you to an expert.
    (91) 1800 4250 744
    www.apple.com/in/support/
    From the above Link...
    To Contact Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57

  • I want to ask about iphone that the facetime is not working in UAE is that a problem ? and this problem affect the front camera "hardware"?

    i want to ask about iphone that the facetime is not working in UAE is that a problem ? and this problem affect the front camera "hardware"?

    minaaemile wrote:
    there somting is like not clear so  i think that the blocking of factime is affect the front camera so i want be sure if the front camera of iphone from UAE is like any iphone from another country and have the same quality ??
    The front-facing camera is available for use even without FaceTime.  If you are having issues with your front-facing camera, I suggest troubleshooting the issue:
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Problems with the front camera on iPhone 4

    Hey, guys. Just faced a problem with the front camera on my iPhone 4. So, when it's enabled this thing is on screen and all the pictures taken on it also has it:
    http://bit.ly/epZypp
    I've never dropped the phone, it isn't jailbroken or unlocked, it was bought in Britain but using in Russia, the firmware is 4.2.1.
    So, guys, can you help me?

    Have you tried resetting your phone by holding down the sleep/wake button and the home button at the same time until the phone restarts?

  • "A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks.

    "A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks.

    Thanks for your reply. I did get upgraded to 10. something. Not on that computer now. 11 is not supported on Vista
    Pat Willener <[email protected]> wrote:
    Pat Willener  created the discussion
    ""A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks."
    To view the discussion, visit: https://forums.adobe.com/message/6442262#6442262

  • HT201365 ahs anyone had a problem with the passcode to iphone after ios7?

    Has anyone had a problem with the passcode to iphone after ios7?

    This link may help with your passcode issues:
    iOS:  Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212?viewlocale=en_US

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Problem with the "now playing"-function after timer sleep-mode

    At first: sorry for my english.
    I have the following problem with the Nano 6G: I set the timer of my iPod Nano to shut it down after a while of playing. When I turn it back on afterwards, the now-playing-button does not show the song that it played at last. Instead of that the nano is automatically set to shuffle mode which was not activated before and the now-playing-button will show any other song randomly.
    This does not happen when I switch it to sleep-mode with the button on the top, only when the sleepmode ist activated by the timer.
    Does anyone notice the same issue with his nano? How can I bring my nano to play the same song after the sleepmode, that it played before?

    Hey Ipaqman, that strange behavior of the Nano 6G annoys me for exactly the same reason: audiobook in bed + sleeptimer = losing the place. As You say, the 5G works better with that and I also hope that Apple takes notice of that issue and will solve it.
    Until that I got myself a "workaround". I create a new playlist on the device, with just the single audiobook in it, that is actually in use. This helps me finding back into it, as long as "now playing" will not work correctly with the sleeptimer.

  • I have problems with the wi-fi connection after upgrading my iPhone to iOS 5- why?

    Since upgrading the software on my iPhone 4 to iOS5, I have had all sorts of wi-fi connection problems.
    The wireless router I have always used is now usually not detected by my iPhone. It still works on my MacBook and iPad, but not on my iPhone. When it is detected, the connection lasts for a few minutes before cutting out. The signal is also very low.
    I have tried the following:
    -Restarting the router
    -Restarting my iPhone
    -Resetting my network settings
    -Restoring to factory defaults
    -Forgetting the network
    -Rejoining the network
    -Setting up the connection manually
    -Turning off location services on my iPhone (I read in another thread this would help)
    I am running out of ideas and I have tried researching this. I found many people with the same problem but no solution for my problem yet.
    Does anyone have any ideas, or know whether Apple is planning on fixing this anytime soon? It's a huge disappointment.

    I tried this! Somebody suggested it in another thread. It did not work, sadly.

  • TS3274 Problems with the front facing camera

    Black screen in FaceTime ... Grey grid in photo booth ... Frozen screen when switching to front facing camera in Camera ... Help !!!

    Try a Force Restart just in case it is a software/firmware issue. Hold down Home and Sleep until screen goes black and a white Apple logo pops up. Release and let it finish starting up.
    If that doesn't help, there may be hardware problems, in which case you would need to take it in for assessment and service. Be sure to have a fresh backup of the phone beforehand, for warranty "repairs" entail a replacement with a blank refurbished unit you would have to Restore to.

  • Problems with the graphic card driver after update?

    First my brand new Macbooks main board had to be replaced since I couln`t charge the battery. After 3 weeks on service it`s back. Everything is fine until I update the drivers. After the restart the screen displays totaly wrong colors. Take a look below. What could be the problem, and can I solve it?
    http://www.blog.tyrkiskpepper.com/blog_img/screen.jpg
    Thanks,
    Andreas

    Some user post that when they reset the pram and pmu and change the resolution screen to its native (biggest) resolution, it will solve the problem.
    Do some more search on discussion search column on your right upper corner.
    Good Luck

  • I have a problem with the iPhoto not updating after the hard drive recall.

    The iPhoto with not update after doing the Hard Drive Recall. It keeps saying I don't have the right ID. I have tried resetting all my passwords and no change. What do I need to do to fix this problem?

    Which OS version did you have when you acquired iPhoto and was it on a DVD (iLife) or did you download it from the app store initially?
    And, last question, did you skip Mavericks? Mavericks owners were given the opportunity to update iPhoto to an app store version free of charge; if you skipped it and do not have a backup or the installer DVD or purchased a new computer recently, then you'll need to purchase it.

  • Making the format button active..

    I tried everything from high- lighting a text or button to make the format button to active , but I have had no success.

    OK, after searching and googling, I think I may have found the answer.  I found a hiding and showing action function, I  will see if I can hide the next button until the video ends, at which point it will appear.  I'll give it a shot and see if it works.

  • Having a problem with the photos showing up after moving everything to another server.

    Greetings,
    I used an older version of iWeb to create several websites a few years back, and would like to retain them. I followed the instructions and downloaded the five folders for the five websites on my iDisk, which took more than two hours, and then uploaded them to the server I use to host another of my websites, and made them all subdomains.
    The first issue I had was a php code error for every page. Turns out I had to remove the very first part of the index.html file: <?xml version="1.0" encoding="UTF-8"?> and then everything seemed fine until I tried to go to another page. Ended up having to do this on every html page for each website.
    Then I noticed that none of the pictures were showing up in the albums. I also have videos on two of the sites, and they worked fine. I checked /Photo_Albums/Pages, and inside were the folders with all the pictures, so I know they're there.
    I have ruled out it having anything to do with my new server by opening the websites in Safari from their folders on my desktop, and had the same results; everything was good except there were no pictures on the page.
    If anyone can help me with this I would really appreciate it! I've got 5 websites I have to get fixed in two days.
    Thanks!
    Take care,
              ~Chris

    Thanks Roddy, but I don't think that's it, either. When I downloaded everything from my iDisk, it automatically created 3 versions of every picture, and named them either micro.jpg, thumb.jpg, or web.jpg. They can be found in the Photo_files>Media folder, each set of three in their own uniquely numbered folder. For example, one the websites is of a friend of mines hot rod Fiero.
    Here is his website via iWeb:
    http://jimsfiero.com/
    This is what it looks like after uploading everything to a different server:
    http://jimsfiero.ricehatersclub.com/
    Here's my personal website:
    http://peckerwoodspitstop.com/
    And here it is after uploading everything:
    http://peckerwoodspitstop.ricehatersclub.com/
    You can see that everything works, except where the page is a photo album.
    Thoughts?
    Oh, BTW, I tried Wyodor's suggestion, and it shut everything down with a 500 Internal Server Error. Removing the suggested file corrected everything.

  • Problem with the ECC6 Data sources after migration

    Dear All.
    I transfer all the data source which is required for sales overview cube 0SD_C03.
    lets take two senairos.
    for example take 2LIS_11_VAHDR to BI 7 and then i migrate this data source with Export option after that i activate the data source and then i initialize the delta request with data.
    the request successfully generated in BI to R/3 but in monitor it shows in yellow for long period of time and no data arrive i wait for 30 min but nothing happen.
    in second one i initialize the delta process for data source 2LIS_12_VCHDR this data source i did't migrate but face the same situation.
    can you please explain what will be the cause of this and how i can manage to fetch the data from ECC6 client through Business content data source.
    i did not migrate the update rules into transformations.
    any help will be highly appreciated.
    kind regards,
    Zeeshan

    yes that is what exactly happen i did not do any thing as in the previous update rules there are written complex abap routine.
    please let me know how to generate the update rules as was there previously or if i have to revert the datasource back to the previous position what i have to do.
    i have figure out that why the data is not coming from SAP just need steps that how to revert the data source or make the new transformations with generated update rules or transformation.
    any help will be highly appreciated.
    Kind Regards,
    Zeeshan
    Edited by: Zeeshan haider on Jun 2, 2009 6:02 PM

Maybe you are looking for