Problem mapping USB external drive connected to Airport Extreme on my PC

I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Similar Messages

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

USB External HD Connected to Airport Extreme - access from outside network?

Hi,
Is there any type of software that I can get that would allow me to access my shared external hard drive w/ my airport extreme from outside the network, like some type of ftp server or anything that would allow me to access it from outside my home?

A simple way would be to share it via Apple File Sharing and FTP...
You'll need a static Ip and a hostname, although it is easy to set up if you have a dynamic Ip too...
Creat a free hostname on "www.dyndns.com" (for example), open your AFP and FTP ports on your router, and then use sotware such as "Rumpus" for the FTP service and tell it what drive you want to share (it can be a network drive). For AFP, all you have to do is connect to the server from the finder, hitting "Go...Connect to Server.."
I've got my extreme drive shared globally and it works fine...just need some time and patience to set up the ports and hostnames...
If you need help on the setup just email me... [email protected] and i'll be happy to answer any questions...

Access to external drives connected to Airport Extreme via USB Hub

I have 2 computers connected wirelessly to an Airport Extreme 802.11n base station. I have a Belkin powered USB hub connected to the USB port on the Extreme. There is a Lacie hard drive, a USB printer and a Kingston flash drive connected to the USB hub.
The printer was connected using Bonjour and is working fine. The other devices connected to the USB hub aren't getting picked up. They did work at one point, but are no longer viewable from the computers (MAC Book and Windows XP). How can I re-configure the Extreme or my computers so that they'll work again?

DLNA = Digital Living Network Alliance. DLNA works in a Server-Client fashion with the Server providing the means to stream audio/video files to the client. DLNA servers are also called media servers. The AirPort Extreme Base Station (AEBS), with an attached USB HDD at best, can perform as a media storage device ... not as a server. You would still need a media server (either hardware or software) to perform this role.
For example, I use a software DLNA-compliant media server, called TwonkyServer. I run this server on one of my Mac minis. It gets its media files that are stored on a USB HDD attached to my 802.11n AirPort Extreme Base Station (AEBSn). TwonkyServer then streams these video files to my Xbox 360 which performs as a media client/player.

XP sp3 cannot see usb hard drive connected to airport extreme 802.11n

I have a sata drive that the airport utility recognizes. I attempted to follow the instructions from post HT1331 but no luck yet. I also reformatted the drive from ntfs to fat32 using vista but with the same result.
I found another post while writing this one which solved my problem. It turns out how I formatted the drive wasn't usable by AEBS.
Connecting Large USB Hard Drives to Airport Extreme
I needed to format the drive using the instructions found below.
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
After doing this and plugging in the drive I was able to use the drive intended. Since I had started the post I figured I would list the solution.
Cheers!

I don't think two problem are related. Now, for PC, try to disable the firewall software if you ave one. Some firewall can block it, like for ex PC Tools firewall, or ZonaAlarm. Some of them you can configure to work with disk agent.

Usb hard drive connected to AirPort Extreme 5th gen not detectable

hello
I connected a exFAT formatted HD via USB to my AirPort Extreme 5th gen.
I'd like to have access to it via my iMac as well as my gf's win laptop.
I only can se the drive in Airport utility but am not able to use it (copy files, read files I put on directly connected to my iMac).
so what could I do?
thank you in advance!
cheers Chris

Thank you!
That was a great hint. I can now access the external HD via my iMac.
on the other hand I'm no longer able to go online with my gf's win laptop.
there's no way to get an internet connection working.
I can see the wlan of the airport extreme but I am not able to log in...
I have no glue!
any help is highly appreciated.

External Drive connected to Airport Extreme, need Time Machine 3 Mac's Help

I own an Airport Extreme and just recently added two new Macs with the Time Machine feature to our household. I would like to use Time Machine to backup to my Airport Extreme that has a 500 GB hard drive connected. It seems Apple has this blocked since they have released the Time Capsule version of the router. Is there a work around this feature so I don't have to go out an purchase what I basically have already got? Please help. We would like to upgrade our older macs to Leopard and us the same system to back them up as well. Please advise. Thank you.

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Access USB external HDD connected to Airport Extreme

Hi.
Today I configured "Back to my Mac" and I'm having a little issue with the external HDD that is connected to the Airport.
Let me explain the configuration: Airport Extreme (latest version) configured with Back to My Mac option, with an external HDD connected using USB port (The HDD is externanly powered). iMac computer with OSX Mavericks wireless connected, configured with iCloud Account and Back to My Mac with screen sharing).
I can access the shared screen and control the iMac from my Macbook Air outside my home network.
The issue is when I try to access the "network HDD" because I can connect using the right user but Finder windows never shows the HDD content. I have to disconect and reconnect to the external HDD to be able to see the files (If I have 3 windows and want to access the HDD on each of the 3 windows, I have to disconnect and reconnect 3 times).
Question:
There is any way to access the external HDD and be able to see its content using the configuration mentioned? The disconnect and reconnect procedure for each window is normal? There is a better configuration I can apply?. Just as information, from my MacBook Im able to see perfect the HDD content from outside my home network.
I know the question is a little bit confusing, but if you need any additional info please let me know.
Thank you.

Does this help?
http://apple.stackexchange.com/questions/117135/access-disk-attached-to-airport- extreme-over-internet

Slow streaming from external drive connected to Airport Extreme

In the last week or so, when I try to play videos stored on my Airport Extreme on my Apple TV, they are extremely slow to load. It takes about 10 minutes before they even play, and at various points throughout it will have to essentially buffer for the same amount of time. The problem seems limited to the Apple TV, though, as I have no problem playing the same videos directly in iTunes.
Has anyone else experienced this lately?

Katie, I have had the same problem with both AIrport Extreme and a new TC.
Have you update the firmware to 7.4.1, if so downgrading back to 7.3.x fixes the problem for now.
I think there is something going on as a result of the 7.4.1 firmware upgrade.

Time Machine doesnt see my USB drive, connected to Airport extreme =(

Hello,
I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
osx 10.5.5 with airport utility 5.3.2
Thanks in advance!

Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
Good luck everyone who struggles with this.
David

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

Don't see files on USB Drive connected to Airport Extreme

I just connected an external drive to my Airport Extreme via USB. It appears as a shared device in the finder sidebar. When I select it, none of the files that reside on the drive appear. It is a 1TB drive with 600GB of files on it, but none of the files show up, only a folder with the drive name. I open the folder and it is empty. The folder window shows 300 GB available. How do I make the existing files visible?

Thanks for the info.
Were you using the drive for Time Machine backups, by chance? Time Machine backups are stored in a different format when the disk is connected directly to a computer. So, you won't be able to continue to use the old backups when the drive location is changed.
You might want to check the drive by connecting directly to your Mac and running Disk Utility to "Verify Disk" and "Repair Disk" if indicated.
Even if the drive has it's own power supply, a powered USB hub is usually needed on the AirPort Extreme because the power at the USB port is quite limited.
Message was edited by: Bob Timmons

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

Using Spotlight to search USB drive connected to Airport Extreme base stati

Hi all,
I successfully connected a USB hard drive to my Airport Extreme base station (the drive has its own power supply; when I tried connecting a USB-powered drive, it wouldn't show up). However, I find that I cannot search the USB hard drive over the Airport network. That is not very convenient, to say the least. Is this possible without paying $500 for Snow Leopard server software or waiting for Lion (with a rumored built-in server function) to arrive?
Thank you!

My last response was incorrect. The base station is in the finder window, under "Shared." I click on that and then I see the USB driver. Also, I went to finder prefs and clicked to show servers on the desktop. So now the USB drive connected to the base station shows up on my desktop. But I still can't search it.
Thanks again.

Problem mapping USB external drive connected to Airport Extreme on my PC

Similar Messages

Maybe you are looking for