Problem Mapping

I am making mapping with software Stylus, soon to transfer it to XSLT TOOL.
But this type of mapping this not working.
The tests with MM of XI were made and I do not have problems.
So that it can be happening?
The scenario is File - XI - RFC
Help me please...!

xmlns:sdn="http://sdn.sap.com/sapxsl"
So that it is used this to header?
it is possible to use another one?
or is necessary a patch in XI so that it can record the data?
the scene finishes to OK and xml sent to R3 this correct one
MONI -> Technical Routing -> Payloads -> MainDocument
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:Z_GL_IESICCSAP_DE023 xmlns:ns0="urn:vivesap:sap:legacy:sicc" xmlns:ns1="urn:sap-com:document:sap:rfc:functions" xmlns:sdn="http://sdn.sap.com/sapxsl">
- <IT_DOCTOS>
- <item>
<TIPPROC>10</TIPPROC>
<BLART />
<BLDAT>20021023</BLDAT>
<BUKRS>ERR</BUKRS>
<BUDAT>20021023</BUDAT>
<WAERS>01</WAERS>
<XBLNR>000000000369</XBLNR>
<BKTXT>037</BKTXT>
<WRBTR>0000000000075896</WRBTR>
<VALUT>20031019</VALUT>
<ZOUNR>000000000369</ZOUNR>
<SGTXT>WALDO MUNIZAGA NAVA XXXXXX</SGTXT>
</item>
</IT_DOCTOS>
</ns1:Z_GL_IESICCSAP_DE023>
But in the table the data is not recorded
Message was edited by: Ximena Gonzalez

Similar Messages

Problem mapping USB external drive connected to Airport Extreme on my PC

I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Problems mapping 2 messages into 1

Hi.
I'm facing a problem mapping 2 messages into 1.
I have a BPM that has 2 abstract messages. In a transformation step, i transform this two messages into one but when i check the IDOC that finally has arrived to R3 backend, the fields that belogns to one of the source messages doesn't appear.
In message mapping i select the two source messages and the target message and the same in interface mapping.
Because is a transformation step inside the BPM, i can't see in SXI_MONITOR what's happening.
any idea of what's happening?
Regards.
Inigo.

Inigo,
Though its in BPM u can where well test the transformation mapping
wht are the messages going in what is coming out
Check How to monitorcc BPM
https://websmp206.sap-ag.de/~sapdownload/011000358700003141152005E/HowToMonitorccBPM.pdf
This PDF is very handy
Regards
Kavitha

Problem mapping JDO to an existing DB schema

I'm having problems mapping a legacy database to JDO. Suppose I have a class
public class Test {
public int pk;
public String fieldA;
public String fieldB;
public String fieldC;
An existing legacy table TEST looks like
TEST
|============|
| PK | ... |
|============|
| 1 | ... |
|============|
The fields values are stored in a separate table
TEST_FIELDS
|==========================|
| PK | FIELD_ID | VALUE |
|==========================|
| 1 | 1 | fred |
| 1 | 2 | accounts |
| 1 | 3 | jim |
| 2 | 1 | wilma |
| 2 | 2 | research |
| 2 | 3 | alice |
|==========================
So the value for fieldA of an object with key i in the TEST table
would be found in the TEST_FIELDS table with key (i, 1), fieldB with
key (i,2) and fieldC with (i,3) and so on. I'm not sure how I would express
such a mapping in the JDO metadata file, or indeed whether this is
even possible. Any suggestions?

This mapping is not possible in the current incarnation of
Kodo.

SB Live! 5.1 problem mapping effect to midi controllers

Hi, I have a SB Li've! 5. and I am having problems mapping effects to the midi controller in the EAX Control Panel. After doing some searching it seems that you can only map 2 effects, to a controller, at any time (which is disappointing), but it seems that for some reason, I cannot even do that, it seems to only allow me to map one effect to a controller at any time.
For example (In EAX Control Panel (AudioHQ) on the Midi tab) I have the following:
Original Sound: Not mappable
Reverb: Not mappable
Chorus: Default
Echo: Not mapped
If I go and try to map Echo to a controller, Chorus changes to "Not mapped", and vice-versa (same with additional effects) thus I can only map one effect at a time.
Anyone know what the problem is? (and why is Reverb Not mappable? which probablly has something to do with the problem)Message Edited by Russ on 0-3-2005 2:20 PM

BTW: Not sure what the actual model name of the sound card is, (it said Sound Blaster Li've! 5. Digital on the box), but the model number is SB0220.
Also, I forgot to mention that this is on Windows XP Professional.

Problem mapping inputText field to a variable in a data control

I have encountered the following problem. Please help. Any feedback is appreciated.
I have a page that contains first name, last name, address, city, state zip and country input text fields and a submit button. When the submit button is clicked, user entered information will be commited to database. This is easily achieved by using a managed bean.
Now I would like to achieve the same functionality by using data control. The reason I want to use data control is to avoid putting the controls (first name, last name, address, city, state zip and country) in the managed bean. I was hoping that they can be directly mapped to the data control variables. The data control is created from a Java object which contains attributes of first name, last name, address, city, state zip and country. The data control is dragged and dropped to a jsff page and the jsff looks like the following:
<af:inputText label="First Name"
value="#{bindings.firstName.inputValue}"
required="true"
maximumLength="25" autoSubmit="true"
id="it10">
</af:inputText>
When I run the page, I can see the label First name but the input box was not shown. So I removed: value="#{bindings.firstName.inputValue}" and the input box appears.
Why did that happen? Can I directly map a data control attribute to an input text field?
Thank,
Cecilia

Thanks for the response, Shay. Really appreciate it.
I tried your first solution - modified the property IsUpdateable to Updateable. However the input text box is still not appearing.
My java class is just a simple Java class. In the class all I have is just a get method for a domain model object.
In the jsff, if I assigned a value to the value attribute (value="Jane"), the input text box would appear as updateable.
Any idea?

Problem Mapping to ABAP Proxy

Hello,
I Have a very strange error.
So i send a Message from Java Proxy ->to-> ABAP Proxy.
The Mapping is a XSLT Mapping.
The Mapping everthings fine but the ABAP Proxy get and error like:
Error during XML => ABAP conversion (; error ID: ; ( ))
....CREATE_TRANSACTIONS(1)IT_TRANSACTION(1)item(1)OPERATORQUAL(9) Error Text: Data loss occurred when converting 9134408 Kernel ErrorId: CONVT_DATA_LOSS))
Ok the error is normally not so strange, but in my XML Message the tag OPERATORQUAL is empty. The 9134408 ist the last filled tag for the OPERATORQUAL.
Why the ABAP Proxy think there is something in ?
I checked the XML and there is nothing.
But when the proxy think there is something like 9134408 that the error is normal, because the field has only except only 1 Char Values.
Any Idea whats going wrong?
Regards,
Robin

Hi Udo whats up ? ,
Mappings all works fine.
Problem was that blanks was there in the XML Tag that you can't see in the XML view.
This blanks came already from Database.
Know i kill all blanks in XSLT Mapping and it Works !
see you soon and regard from zagreb,
Robin

BPM problem: mapping in a transformation step

Hello,
In my current BPM scenario....
1)I created the interfaces below for the Receive step (receives MT_Request):
-MI_async_BPM
-MI_async_abstract
2)Then I created the interface and mapping for the transformation step:
-MI_JDBC_async_abstract
MM(MT_Request to MT_Request2)
IM(MI_async_abstract to MI_JDBC_async_abstract)
3)Then I created the interface and mapping for the Send step:
-MI_JDBC_async_in
MM(MT_Request2 to MT_DB_Insert)
IM(MI_JDBC_async_abstract to MI_JDBC_async_in)
Problem:
However, after I executed the scneario, it appeared the step 2) didn't go through correctly(error message:NO_RECEIVER_CASE_ASYNC). Did I set up the configuration wrong in Integration Process?
Also, I went back to ID to create a Receiver Determination for step 2) (thought this may clear the problem), but in the Sender tab of Integration Process object, MI_async_abstract was not in there. Please give me a hand on this problem. Thanks.
Regards,
Steve
Message was edited by: steve peng
Message was edited by: steve peng

Hi Steve,
Below is the explanation for correlation by Anand Torgal which i think will be helpful to u....
To explain you the correlation in simple terms...take a simple example of BPM with a send step(async request) and receive step(async response). I am sending a PO request using the send step and waiting for a PO response using the recieve step. Assume that i have two instances of this BPM running i.e two PO request's going simultaneously. when i get the response back for these two requests , there will be two recieve steps waiting for the response since there are two instances of BPM running. the response need to be assigned the corresponding requests. This is where correlation comes into picture. I can use PO number as my correlation field. i.e I activate my correlation in the send step and use this correlation in receive step (this is configurable in BPM).
Example: PO number needs to be part both request and the response message structure.
BPM instance1:
send step -> activate correlation -> send message with PO Number1
Receive step -> use correlation -> receive response message with PO Number 1.
BPM instance1:
send step -> activate correlation -> send message with PO Number2
Receive step -> use correlation -> receive response message with PO Number 2.
There are many different scenario's whre you can use the correlation..this is one of them...The weblog shows another way of using correlation.
Also Refer SAP help...
Correlating Messages
Use
You use a correlation to assign messages that belong together to the same process instance. A correlation joins messages that have the same value for one or more XML elements. A correlation is therefore a loose coupling of messages: at design time, it enables you to define which message a receive step must wait for, without knowing the message ID.
For example, in a process, receivestep_1receives the message purchaseorder, while receivestep_2receives the message salesorder. Receivestep_1creates a correlation that defines that the corresponding sales order must have the same purchase order number. Receivestep_2uses this correlation. This means that an instance of the process processes a purchase order and the corresponding sales order, which has the same purchase order number.
If it satisfies the relevant correlations, a message can be processed in multiple processes. However, a message is only delivered once per process.
http://help.sap.com/saphelp_nw04/helpdata/en/a5/64373f7853494fe10000000a114084/content.htm
Regards,
Abhy

Problem mapping response of JDBC receiver adapter

hi everybody,
I have the following problem. I want to retrieve data from Oracle DB. I execute the following sentence:
"Select count(*) from X". I'm doing that by means of action=SQL_QUERY. The response is something like that:
<?xml version="1.0" encoding="utf-8"?>
<ns0:MT_WM02_request_bbdd_count_response xmlns:ns0="urn:xxx-com:xi:xxx_WM">
<STMT_response>
 <row>
 <COUNT()>32</COUNT()>
 </row>
</STMT_response>
</ns0:MT_WM02_request_bbdd_count_response>
The problem is that I can't map the response because the Integration Builder doesn't allow to develop this kind of element on the Data Type. I mean <COUNT()>. The symbols '(' and '' are not permitted.
How can I solve the problem?
Thanks in advance,
Regards
Carlos

Change your query so that, it has virtual name for the count(). Some thing like.. slect count() as xyz ...
VJ

Problem mapping to XMLBean using database control

Hi
I have to generate an XML document based on the values returned from the database. I have an industry standard XSD with me and Im trying to use the database control to automatically map the resultset data to the XMLBean. While doing so, it works fine for flat structures that doesnt contain any complex types and attributes. But, when the XSD contains attributes or nested complex types it creates XMLBean with a flat structure and generates an invalid XML document. All the attributes get mapped to elements and thus when i try to validate, it fails.
I would appreciate if anyone can let me know if this is a limitation in weblogic 8.1 or do i need to configure something. This problem has been bugging me for a very long time and i have posted in all forums and i strongly feel that there is no point checking for everyfield value and setting into XMLBean manually. Also the number of fields in our XSD is 400. So any help would be greatly appreciated.
Thanks
Kishore

Hi Kishore,
This is vinod.I have same problem but not too complicated as yours.It is written u got simple values from database using flat structures.could u please post the code for me.
We have this requirement:
We have to retrieve the each row from the database and display in form of a tree.how do we get it.
Thanx in advance.
Vinodh

Problem mapping to unbounded sequence in OSB

I have a problem with the Xquery transformation editor in Oracle Service Bus.
In the source I have an element with maxOccurs="unbounded" and in the target I have a sequence with maxOccurs="unbounded" containing an element with maxOccurs="1".
The problem is in the Xquery mapping interface all sequences are ignored. Thus it looks like 'targetElement' can only occur once and so I don't know how to resolve this. Is there a way to view the sequences in the mapping interface or something?
---xsd SOURCE---
<xsd:element name="sourceElement" maxOccurs="unbounded">
</xsd:sourceElement>
---xsd TARGET---
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="targetElement" minOccurs="0">
</xs:targetElement>
</xs:sequence>
(I am not at liberty to change the xsd's.)
Thanks in advance, Emelie

..is this what you are after ?
<target>
 for $src1 in $src/sourceElement
 return
 <targetElement>{data($src1)}</targetElement>
 </target>
source
<ns0:anyType xmlns:ns0="http://www.w3.org/2001/XMLSchema">
<sourceElement>a</sourceElement>
<sourceElement>b</sourceElement>
</ns0:anyType>
Result
<target>
 <targetElement>a</targetElement>
 <targetElement>b</targetElement>
</target>

Problem mapping header/items in 1 Message Type

Hello,
I'm currently facing the following problem in my message mapping:
On my 'CRM side'
I have a MessageType (DataType) consisting out of +/- 10 header fields and a field called 'ITEMS'
'ITEMS' is table type field consisting out of +/- 5 item fields. Ofcourse 'ITEMS' can occur min1 time - max ?? times
On My 'Dbase' side I have a MT containing 2 'update' statements
1 table is updated for every header record ( mapped with header fields )
1 table is updated for every item ( mapped with header fields as well as item fields )
As far as the header data is concerned everything works fine.
The problem is in the update per item.
The fields that are mapped with the fields inside 'ITEMS' are working fine.
But ... I need to put 3 fields from my header level in the 'item table' as well. So I mapped them from header level to 'Item table'
This seems to work fine as long as I have only 1 item. From the moment I have more then 1 item, the mapping throws an error that he can not create the target item.
I have the impression that he 'looses' the link between header and item(s) from the second item on.
Can somebody let me know that I have to use a special function or something to do this type of mapping ( mapping from header level towards item level ) ?
I tried already some things with the functions 'Remove context' and 'CollapseContext' but this does not seem to help.
Every help is welcome,

Hi,
Here you will be passing some values from Header Segments to Item level. So definately there should be a link available between them to pass the appropriate values..
For multiple Item fields you need to use the single header fileds as common
you should go for UseOneToMany API in Node function
Header field to be passed --------->
(Update table for Item level) ITem Node -------> UseOneToMany -----> splitByValue -------> Target field
(Update table for Item level) ITem Node ------->
Thanks
swarup

Problem mapping LoginModule roles to ejb security roles

I have "successfully" managed to implement the DBSystemLoginModule. When I run my application I successfully authenticate to the database, the login module successfully retrieves the users roles from the database and adds them to the subject:
PassiveCallbackHandler cbh = new PassiveCallbackHandler(username, password);
LoginContext lc = new LoginContext("current-workspace-app", cbh);
lc.login();
I then perform a lookup on a bean using the same user:
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
env.put("java.naming.security.principal",username);
env.put("java.naming.security.credentials",password);
env.put("java.naming.provider.url", "ormi://localhost:23891/current-workspace-app");
Context ic = new InitialContext(env);
final SessionEJBHome sessionEJBHome =
(SessionEJBHome) PortableRemoteObject.narrow( ic.lookup( "SessionEJB" ), SessionEJBHome.class );
Finally, I create an instance of the bean and call a method of this bean.
SessionEJB sessionEJB;
sessionEJB = sessionEJBHome.create( );
sessionEJB.testMe( );
I am expecting (hoping) that the roles retrieved from the database by the login module may be used to authenticate the ejb methods. i.e. if (in ejb-jar.xml) the method "testMe" has a method-permission with role-name of "ABC" then this method may only be accessed if the user is a member of the "ABC" role retrieved from the database by the login module. However I get the message:
"username is not allowed to call this EJB method"
When I add a security-role-mapping in orion-ejb-jar.xml mapping the role "ABC" to the group "ABC" (and impliesALL="true") then the method is called successfully. However, if I add a security-role-mapping mapping the role "DEF" to the group "DEF" (which the user is not a member of) the ejb method is (wrongly) called successfully (with implies all="false" the method always fails). In other words there seems to be no mapping of the roles retrieved by the login module to the ejb security roles.
Can anyone please enlighten me on how I can achieve the mapping of the ejb security roles to the roles obtained from the login module.
Thanks
PS I have this problem with JDeveloper 10.1.3 (Developer Preview 10.1.3.0.2.223 and Early Access 10.1.3.0.3.3412)

Hi Sebastian,
yes, it is possible to do such mapping. And here how it works:
1. define security roles in the ejb-jar.xml within the <security-role>. For example:
<security-role>
 <role-name>test</role-name>
</security-role>
2. then you map the roles those roles to server security roles using the <security-role-map> tag of the ejb-j2ee-engine.xml descriptor.
<security-permission>
 <security-role-map>
 <role-name>test</role-name>
 <server-role-name>myUMErole</server-role-name>
 </security-role-map>
</security-permission>
the myUMErole must be defined in the UME!
Does this answer your question?

Problem: mapping mouse co-ordinates to a list of nodes in a graph.

Hi.
I have an undirected graph containing many nodes, some represent squares/tiles and some represent rooms in a board-game called Cluedo.
Each node has an ID: -
Rooms are called by the room name. -> Kitchen/Lounge
Squares are called by the concatenated x/y position. -> A1/A2/K20
I have created an algorithm to find the shortest path between two nodes in the graph.
The problem I'm faced with is finding a way to map co-ordinates on the image file to these IDs. I have seen an implementation of a similar idea with an invisible image acting as a "colour-mask", so when the click hits the graphical map a function works out the colour of that pixel on the "colour-mask" and then uses a look-up table to find out which ID that is associated to.
The problem with the above is that a Cluedo board has about 22x22 tiles and several rooms (each room would occupy several tiles in an undefined shape.)
I've provided two example map files:
http://www.dcs.qmul.ac.uk/~ade1/map.gif
http://www.dcs.qmul.ac.uk/~ade1/map2.gif
Does anyone have a suggestion of how I could solve this problem using what's available to me with Java?
I'd appreciate any suggestions,
Alexander Ellis

Create a two-dimensional array that maps from grid coordinates to node/room objects.
NodeOrRoom[][] grid = new NodeOrRoom[22][22];
grid[0][0] = kitchen;
grid[1][0] = kitchen;
nodeLookup(int pixelTop, int pixelLeft) {
return grid[pixelTop / gridCellHeight][pixelLeft / gridCellWidth];
}Matthew

Problem mapping a same field to a field in duplicated segment

Hello,
I have a problem with my mapping. I'm trying to map a MATMAS.MATMA05 to another MATMAS.MATMAS05 iDoc. The mapping for the other fields is ok except for the LTKZA.
The idea is to duplicate the E1MLGNM segment in the target IDOC. Then I would like to have the LTKZA field for each segment mapped to the STOFF field(wich only appears once in the origin segment), with a small function that checks the value of the STOFF.
My problem is that the LTKZA in the first E1MLGNM segment is populated with the right value, but the one in the second segment is not populated.
Could anyone help with this issue? Do u think I can save the value of STOFF in variable, so that I can use it later?
Thank you all for your help.

Thank you Gordon,
I combined the copyPerValue function and the SplitByValue and it worked fine.
Sorry again to post the thread in the wrong forum.
Regards,
Natacha

Problem Mapping

Similar Messages

Maybe you are looking for