Problem matching hostname and IP address cannot start XI Design Environment

Hello All,
The present situation is
>> XI installed on Sun Solaris with domain xyz.
>> But i am using Windows to develop the XI Scenarios.
>>if i say http://xyz:50000/rep/start/index.htm, i am not able to get the NetWeaver Page for XI
>>but, if say http://IP ADDRESS:50000/rep/start/index.htm, then its working fine.
The problem is when i use java web start for opening the Design platform, it starts to download the *.jar files  by specifying <hostname> xyz, hence unable to download the .jar files and hence not able to start the Design time and Configuration time Environments!
Help Appreciated
Regards,
Ramesh P

Hi Ramesh,
Assuming you are using Windows environment, do the following in the m/c you are running integration builder:
Go to Start->Run->Type drivers->Ok->go to folder etc->open hosts file with notepad->in the last line, set your XI Server hostname and provide the IP for the same. (An entry for 127.0.0.1 localhost will already exist in the file)->Save and Close. Now try running SXMB_IFR.
Regards,
Amitabha

Similar Messages

  • Firmware update was done on my MacBook Air while connected to power source and now I cannot start up. It keeps shutting down. Any ideas??

    Firmware update was done on my MacBook Air while connected to power source and now I cannot start up. It keeps shutting down. Any ideas??

    Start by doing an SMC reset http://support.apple.com/kb/HT3964 and see if that resolves it.

  • What is the procedure to change the hostname and IP address of iAS?

    Dear all,
    I would like to change hostname and ip address of iAS, is it just only
    change the kregedit or i need to change some config file?
    Thank you for your help!
    Angus

    Hi,
    i am not sure what do you mean by changing ip address and machine name.
    Is the IP address and machine name of the installation machine changed?
    Then you can change the ip address and machine name from kregedit. If
    you want to run it from some other machine, you wont be able to do it.
    regds
    parsuram panigrahi
    Angus Yiu wrote:
    >
    Dear all,
    I would like to change hostname and ip address of iAS, is it just only
    change the kregedit or i need to change some config file?
    Thank you for your help!
    Angus

  • I deleted my launchagent by mistake and now I cannot start my Imac

    By mistake I deleted my launchagent and now I cannot start my IMac, can anybody help me 

    wasemthedream wrote:
    the cd is os x 230.1.2
    I have no clue what that means.  If you are the owner of the iMac, which OS is currently installed?  Since it appears you have a CD what color is the label and which OS is showing on the label?
    CLICKY CLICK---> http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers
    I cannot start the Imac up, it goes straight to grey screen.
    I know my pasword and everything but its telling me that its not the id I bought it with and I never had or used any other
    http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

  • Chaging hostname and IP address

    We have a Solaris 10 machine and need to change the hostname and the IP address. I have worked primarily with Solaris 8 and this is my first experience with Solaris 10. I am fairly sure I will get the basics, but I have the vague recollection that there was something under /etc/opt or similar. Now, I cannot find it. So, I was wondering if someone knew of a checklist of things to change to make sure that I do not miss anything.
    Any info would be greatly appreaciated.

    I guess I should learn to look harder before I post:
    http://forum.sun.com/jive/thread.jspa?threadID=73429

  • Hi, i have a lot of problems, artwork muddled and losing tracks, cannot download latest version of itunes, unable to burn onto disc.Can anyone help, i am not great with these things!!

    Hi lots going wrong with my music library, artwork is muddled up and also losing tracks because of this, also unable to download latest version of itunes and finally i cannot burn my music to disc. i have an external hard drive and a fairly large library, around 30,000 on it. Any suggestions!!

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • Change hostname and IP-address by a script

    Hey!
    I want to migrate a collaboration suite from a standalone machine to a virtual machine. Their I need to change the hostname and the IP-address from the whole collaboration suite.
    My question is: Is it possible to change the hostname and the IP-adrdress and if yes! Is their any script from Oracle which I could use?
    By the way: I use the same host configuration as before (SLES 9) and have a FULL environment backup.
    Thanks ahead..

    Hi, try to look here:
    http://download-uk.oracle.com/docs/cd/B25553_01/collab.1012/b25490/ch_changing_netconfig.htm#BHBBJEBF
    and here:
    http://download-uk.oracle.com/docs/cd/B25553_01/collab.1012/b25490/ch_backing_up.htm#i1010667
    You can change the ip address but you can't change the hostname

  • I used the iTunes match workaround and now want to start over, but I am being told I have exceeded the limit even though I completely cleared the match cloud, mindful of the 1000-delete-at-a-time limit....what should I do?

    I have over 25k songs in iTunes. I originally tried the "create a second library" solution. I reduced to less than 25k songs and successfully ran iTunes match. Then I discovered the limitations of the second library solution regarding adding more music, managing playlists, and turning back on my main library and being greeted with all sorts of problems.
    So, I created a blank library, ran iTunes match, and its showed me all of my files in the cloud that had been matched or uploaded. I deleted all of the files, mindful of the 1000 file limit per delete. I have confirmed I have now deleted them all. An iTunes match update says I have no files in the cloud. Perfect.
    I reduced my library again, this time using the superior method of just changing the files I do not want to match to voice memos. That is done. I have less than 25 k songs.
    I waited 2 days and ran match again. Yikes. It did not let me match or upload anything, and every music files's cloud status just says "exceeded limit," despite the fact that my cloud is devoid of music and I have no access to any music via match.
    I am in a limbo where I have nothing in the cloud from match, but I can't add anything because match says I exceeded my limit.
    I emailed customer support, and got back a useless email linking me to a very general article about iTunes match. I called customer service and they said this was something the iTunes store people would need to address, and they can only be contacted by email. Sigh . . . .
    Any thoughts?
    Thanks

    Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device?  If so, keep in mind that Apple's servers may be experiencing a heavy load right now.  They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

  • ITunes crashed and now i cannot start my Macbook up

    Hey, i just purchased an iPhone 4 today and upon setting it up with my iTunes, my Macbook crashed, it was totally unresponsive. So i held the power button down until it switched off. Now when i try to turn it back on it just stays at the grey apple loading screen, i left it there for 15 minutes and it was still there! HELP!

    If you haven't tried, startup your Mac without the iPhone connected.
    Help here >  Resolve startup issues and perform disk maintenance with Disk Utility and fsck

  • Cannot start ODI Designer & Topology after creating Master repository

    Hi all,
    After creating the master repository in ODI, i cannot open all ODI tools such as Designer, Topology Manager, Security Manager e.t.c. The real problem is the fact that no error message is appeared after giving user name and password.
    Could someone help me?
    regards,
    George V.

    Hi,
    After creating the repositories are you directly logging into the Designer or
    Topology.......
    You need to create a work repository connection for ur Designer and topology.......i think u might have missed this.......
    Is it helpful........
    Thanks
    AK

  • Cannot start xfce4 desktop environment

    Hello all,
    I have just installed a fresh Arch install. I cannot seem to start the xfce4 gui though.
    I have installed the xfce4 package, yet when i run startxfce4 i receive the following error.
    /usr/bin/startxfce4: Starting X server
    /etc/X11/xinit/xserverrc: line 1: /usr/bin/xfce: No such file or directory
    /etc/X11/xinit/xserverrc: line 1: exec: /usr/bin/xfce: cannot execute: No such file or directory
    <init: giving up
    <init: unable to connect to X sercer: Connection refused
    <init: server error

    Have you manually edited /etc/X11/xinit/xserverrc? I have just checked and /usr/bin/xfce does not exist on my system. As a workaround, you could try installing a display manager (XDM/KDM/GDM/SLiM) and try to start xfce from there. As another option, you could use a .xinitrc file with 'exec startxfce4' and run X using 'startx'.
    Edit: typo
    Last edited by Fadel (2011-05-07 00:58:37)

  • Zoom and Drilldown don't work in design environment

    Hi All,
       I'm, testing a crystal report .net web app in development. In design, The drilldown doesn't want to drill down and I get an error when I try to select a different zoom ratio or even export to pdf. I get "The types of the parameter field and parameter field current values are not compatible."
    When I run the reports within CR 2008 SP2, it works fine.
    I am using:
    .NET 3.5 SP1
    CR Runtime 120
    CR 2008 SP2 for design
    VS 2008 SP1
    Any suggestions?
    Thank you in advance,

    Good. we were on the same trail here. I was going to ask for you to just use the code as:
    report.Load("C:\Report.rpt")
    report.SetDatabaseLogon("abc", "123456", "192.168.1.1", "DATA")
    CrystalReportViewer1.ReportSource = report
    That would have forced the report to prompt for the parameter values. If that worked when you manually enter the values, we'd have come to the same conclusion you did. E.g.; somehting wrong with how the params are bting passed.
    below is a code that should get yoo going:
    To pass a date/time value to a date/time parameter, use the following steps:
    1. Add a report to your project.
    2. Add a date/time parameter to the report and name it "DateTimeParam".
    3. Add the following lines of code to the top of the code page:
    'Import the following namespaces
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    4. Add the following lines of code to a click event or form load event, etc.
    'Setting date/time parameters at runtime
    Dim crReport As New CrystalReport1()
    'ParameterFieldDefinitions and ParameterFieldDefinition are from the
    'CrystalDecisions.CrystalReports.Engine namespace
    Dim crParameterFieldDefinitions As ParameterFieldDefinitions
    Dim crParameterFieldDefinition As ParameterFieldDefinition
    'ParameterValues and ParameterDiscreteValue are from the CrystalDecisions.Shared
    'namespace
    Dim crParameterValues As ParameterValues
    Dim crParameterDiscreteValue As New ParameterDiscreteValue()
    'Set Date/Time discrete parameter value
    crParameterDiscreteValue.Value = CDate("8/9/1969 12:01:00 AM")
    'Access first parameter field definition
    crParameterFieldDefinitions = crReport.DataDefinition.ParameterFields
    crParameterFieldDefinition = crParameterFieldDefinitions.Item("DateTimeParam")
    crParameterValues = crParameterFieldDefinition.CurrentValues
    'Clear existing parameter values
    crParameterValues.Clear()
    'Add the parameter value
    crParameterValues.Add(crParameterDiscreteValue)
    'Apply the current value to the parameter definition
    crParameterFieldDefinition.ApplyCurrentValues(crParameterValues)
    5. Pass the report object to the Windows Form or Web Forms viewer and run the application
    Ludek

  • MBP  17" running OS10.9.2....... how do I reformat it and then instal OS 10.6.8 on it.... have put in SL disc and pressed C when starting but I cannot install the OS

    I have MBP 17" running OS 10.9.2....... I need to have OS 10.6.8 so I can contiue running Quicken 2006. I have this on my Mac Pro but am switching to iMac and hence will dedicate laptop to finances. I pressed option when starting and got disk utilities and erased the HD..... I put in the Snow Leopard disc and pressed C when starting but then when I try and install it shows icon of my HD and says I cannot start up from that disk....... I get the same thing when I insert the #1 instal disc that came with the computer. How do I instal OS 10.6.8 (if I go recovery mode it will insatll 10.9.2 which I don't want on this laptop.
    Thanks for any help.

    The grey disk says OS 10.6...... i tried it as well as the SL disk with the C pressed....... what happens is that it directs you to agree etc and then asks where you want it installed..... the icon of the computer HD however has the yellow exclammation sign saying I cannot start from that disk.
    My super drive is working.......
    Since I need to get to Quicken for taxes etc what I have done presently is formatted a LaCie rugged drive, partitioned it and when I attach that drive to the MBP and start up again I was able to install on the external drive....I am presently downloading the combo upgrade that will take me to 10.6.8
    I still don't understand why it wont instal on the MBP I i know you cannot go earlier than what the machine shipped with but since this is 10.6 it should.I have a Mac Pro with one internal drive running 10.9.2 and the other 10.6.8 and I'd select the earlier system to start when I wanted to do my finances. I have upgraded to an iMac and hence cannot use that for acessing the earlier system
    Interestingly, I partitioned another LaCie drive and was able when running 10.6.8 on Mac Pro to install on the external drive...... however when selecting that ext. HD for starting it never did restart with it , always restartd using the 10.9.2 system that was actiually on the other disc.

  • Cannot start or uninstall iTunes

    Last night my power went off and caused me to have to do a system recovery on one of the users of my computer. While I was trying to figure out why the user's desktop was messed up I tried running Itunes. It said there was a new update so I went ahead and updated it. I then went through the recovery process and now I cannot start or uninstall Itunes. When I try to start it says there has been an error and asks me if I want to report it, I have answered yes and no and I also slected the debug option and that had no effect. When I try to uninstall it says it is starting the uninstallation wizard, but it never finishes. I seem to be stuck!

    I have the same problem, did you find a solution?

  • Se80 cannot start graphical screen painter

    Hi experts:
          When I open graphical painter, I counter a problem message 'password in router string.cannot start graphical screen painter' of gnetx.exe, Who can solve it,TKS.
    Allen

    Dear Allen,
    Please have a look at Below Note
    SAP Note 898102 - Error message "Password in router string."
    Solution in Note is given as below.
    SAPGUI Release 620: Import GUI patch 59.
    SAPGUI Release 640: Import GUI patch 16.
    SAPGUI Release 710: Import GUI patch 03.
    Hope This Solve your Issue.
    If required also See OSS notes 204910 and 101971
    Regards,
    Lijo joseph
    Message was edited by:
            Lijo Vazhappilly

Maybe you are looking for