Problem med synkronisering av Ipad med MAC Mountain Lion, IOS 6

Hade även detta problem med Ipad 2 och Snow Leopard och IOS 5. Felkod 1140. Någon idé ?

This was a know error that should be fixed I found out on the web

Similar Messages

  • Problems installing PE 4.0 in Mac, Mountain Lion

    Since I have CS 4 running on my McBook (Snow Leopard) I don't need PE 4.0 anymore. I wanted to install Photoshop Elements 4.0 on my new Mac (Mountain Lion). When I tried, it ran through all of the necessary installation steps with one exception. I wasn't asked to type in the product key. When everything was installed I got the message: "Due to an unknown error installation failed". I don't understand why. The programme was legally purchased when I bought the old Mac. Why shouldn't I be able to install it on another computer?

    same answer, your os is not compatible with pse 4.
    you are entitled to pse 12 with upgrade pricing so make sure you keep your pse 4 serial number, http://www.adobe.com/products/photoshop-elements/buying-guide.displayTab3.html

  • How do I get my mac mountain lion to stop saying, "You shut down your computer because of a problem?

    My Mac Mountain Lion desktop computer keeps saying, "You shut down your computer because of a problem." How do I keep this from happening?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • How can I synchronize my blackberry 9810 with Calendar Mac Mountain Lion

    hello, i've a big problem because i can't transfer my date from my blackberry 9810 to my calendar apple mac mountain lion and not the inverse. I utilise the blackberry desktop but it's only bi-directionnel and i would like to do it just in this sens because all my dates are in my phone. I can't understand why it's not working. Before i utilise icalc and it was working.There now it's calendar for mac and it's not working. It's says that it where 96 date but they are not transferred or i don't find them. Thank you for your help and if it's a french who response me it will be better but all are good of course.

    You can't install a previous version on your Mac since it came with Mavericks pre installed.
    Read here >  Don't install a version of Mac OS X earlier than what came with your Mac
    Some Macs are still shipping with Mountain Lion. I should have asked you.
    I'm glad macjack caught that 

  • Problem waking imc after sleep since installing mountain lion

    iMac
      Model Identifier:          iMac7,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          4 MB
      Memory:          4 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          IM71.007A.B03
      SMC Version (system):          1.21f4
    I installed mountain lion and since then when the computer sleeps for more than 1 hour, I come back to a blank screen. Initially I could use the mouse as a chalk board eraser and uncover the login most of the time. This showed a white box erasing a black screen. Recently, I come back to a grey screen with a black box that does not move in response to the mouse or arrows. I have to do a hard shut down and then restart to use the imac. I run Norton antivirus scans regularly and they have not found a virus.

    Thanks Paul. I tried it and it didn't work. I completely removed the program.There are reports of MAC mountain lion viruses I found online and I still worried. I did not find any other cause for the situation though. Interestingly, Norton came out with upgrades that claimed to fix the problem I was having and stated it was now compatible with the new OS.
    Downloading the newest version of Norton and installing it from scratch ( my subscription was still good) did resolve the issue.
    I believe there was some part of the old program that hung around and was not uninstalled completely. This must have been fixed with the latest vs installation.
    I have used Norton almost as long as I have been using Macs. ( since the first Macintosh). I have found and been able to remove viruses before. I am skeptical that any OS will eliminate the need for virus protection.

  • GPU in after effects cs6 on mac mountain lion with Intel HD 4000

    Is its possible to enable GPU in after effects cs6 on mac mountain lion with Intel HD 4000?

    No, OpenGL Swap Buffer support (Level 1) support for the HP4000 is for Windows only. Level 2 and 3 support is not available either. You'd need a more powerful NVIDIA card for Level 1, 2, and 3 feature support.
    More info here: http://helpx.adobe.com/after-effects/using/rendering-opengl.html#main-pars_header_3

  • I can no longer run Adobe PhotoShop 8 with Mac Mountain Lion

    I can no longer run Adobe PhotoShop 8 with Mac Mountain Lion. I get a recurring error message 150:30. Please help

    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  • Is Photoshop elements 11 compatible with Mac Mountain lion?

    Is Photoshop elements 11 compatible with Mac Mountain Lion?

    the older version of Photo Shop is no longer supported.
    Don't know which version you mean, but if you mean PSE, then versions 6 and up will work.
    You can't migrate any version of PSE, though, from one disk to another. It must be installed freshly on each machine, since adobe doesn't care about the apple developer guidelines and PSE is not a tidy mac app package--the PSE installer strews stuff all over your hard drive, and you can never move it and get all the necessary bits.
    What I was talking about is if you had a computer with 10.6 or 10.7 and PSE installed on it and then upgraded to mountain lion. In that case it's essential to go into the user library and delete any existing preference files before running it after installing 10.8.
    The instructions to install PSE in mountain lion are to put the disc the drive or to double click the downloaded .dmg file to mount it, and then to run the installer.

  • Bootcamp windows7 freezing on start up and taking around 40 minutes to load. Mac mountain lion also taking around 5 minutes to load on start up

    I would like to have your kind support..Bootcamp windows7 freezing on start up and taking around 40 minutes to load. Mac mountain lion also taking around 5 minutes to load on start up.

    My first step would be to get rid of "Norton protection". Boot from your OS 10.6 disc, navigate through your hard drivve and trash anything that is Norton. Empty the trash.
    Next, run Disk Utility and ask it to repair the hard drive.

  • Safari 7.0 is supported in MAC Lion and MAC Mountain Lion?

    Hi,
    I have a MAC Lion and MAC Mountain Lion with Safari 6.0 installed and i would like to upgrade it to Safari 7. Please let me know if S 7.0 is supported for these OS Versions
    Thanks,
    Bhuvanesh

    It's only available for Mavericks.
    (102617)

  • Why Mac Mountain Lion cannot use gdb to analzy kernel core dump??

    I'm trying to use gdb debug  a Core Dump after a Kernel Panic which I collected from two Macs,but when i use list command below i get some errs:
    then get "can't find symblos for ****

    Hi Linc Davis:
      thanks for your replay!
      And could you tell me which "debug kernel available" shall i need to run,because i have seached all of Apple Developer site but found nothing useful infomation to be set?!
      Below are the steps how i get  Mac Mountain Lion(10.8.3 Build:12D78) kernel core dump from Apple Developer site:
    1、Configuring the Server:
    1)Creating the core dump directory:
       server$ sudo mkdir /PanicDumps
       Password:********
       server$ sudo chown root:wheel /PanicDumps
       server$ sudo chmod 1777 /PanicDumps
    2)Activating the core dump server
       server$ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.kdumpd.plist
       Password:********
    3)Verifying the core dump server is active
       server$ sudo launchctl list | grep kdump
       Password:********
        - 0     com.apple.kdumpd
    2、Configuring a Client
      client$ sudo nvram boot-args="debug=0xd44 _panicd_ip=10.***.***.***" (10.***.***.***
      Password: ********
    when i got client pc core dump,and use gdb analyze it ,i got some errs,eg,
    /Volumes/KernelDebugKit?kgmacros:342:Error in sourced command file:
    cannot access memory at address 0xffffff8000200004

  • Can't access Cisco Connect app since I've upgraded to Mac Mountain Lion

    I've been searching for a while to resolve this and can't find any new software downloads for my Valet (M10).  Ever since I upgraded to Mountain Lion, the Connect app doesn't work.  Is there a place I can download an update?
    Thanks.

    Unfortunately, there’s no available update yet for Cisco Connect for Mac Mountain Lion. The Linksys website shows that it is compatible with the Mac Lion. I have been waiting for the Mac Mountain Lion update, too. We can only wait then for the update to be posted. For now, you can make use of the router’s user interface (http://192.168.1.1) should you need to make changes on it such as the wireless settings.

  • Using Mountain Lion iOS and audio output will not change from internal speakers to AppleTV so that sound can come from TV speakers, why??

    I am using Mountain Lion iOS and trying to connect my MacBook Pro to my plasma TV using AppleTV and AirPlay mirroring.     The video does just fine.     However, there is no audio coming from the TV.     After activating AirPlay I try to select Apple TV as the audio output in System Preferences and it highlights it but then immediately goes back to Internal Speakers and only has sound coming from the MacBook Pro..
    What's going wrong ?????
    AJ

    Are you sure that WIFI network doesn't have an AppleTV on it?  Just because you don't own it doesn't mean there isn't one on that network.  The laptop or better said the OS cannot differentiate between an AppleTV that you own or not.  If it sees one on the network, it will show you one as being available.  The automatic reconnection is happening probably because the last time you streamed to an AppleTV, you didn't drop that connection before sleeping the computer or shutting down iTunes.

  • Regarding iCal on Mountain Lion (iOS 6.8.5):  How can I find Holiday subscription?  The O/L Help is not applicable.

    Regarding iCal on Mountain Lion (iOS 6.8.5):  How can I find Holiday subscription?  The O/L Help is not applicable.

    Check under the File menu and there should be an option to add a subscription.
    Calendar Holidays

  • Dreamweaver and Java SE 6 Runtime problem on MAC Mountain Lion OSX

    I have a problem with dreamweaver. I really love dreamweaver for building web pages and have used it for years with a PC.  I recently switched from a PC to a MAC but I find that when I open the Dreamweaver app for the first time I get a prompt that says something like "You must download Java SE 6 runtime, would you like to install it now?"   I click yes, and the download fails.  I called Apple about it, they said the software resides on Oracle's Java web site, and its out of their control.  I go to the Oracle Java web site it says "Apple supplies their version of Java SE 6 runtime and there's no way to download it from the Java.com site.  All this means is that YOUR software does not work on my MAC because these two companies can't agree on who suppies this software.
    What I need to know is HOW DO I GET DREAMWEAVER TO WORK?  How do I get around this crazy *** catch 22 situation?  And why doesn't your software recognize Java SE 7 runtime?

    I'm in the same boat with you. I recently used Time Machine to backup my profile and then wiped my entire drive and installed Mountain Lion. After importing all of my data with the Migration Assitant, Dreamweaver will NOT open.
    SnakEyez02, Oracle's website does NOT have the dowload. The link you posted is to version 7. We've been down this road already. Martiantime is correct, neither Apple nor Oracle are providing Java SE 6, but Dreamweaver is crying to have it installed.
    So, Adobe, how do we get out of the hole that we did not dig?

Maybe you are looking for

  • HT5361 I can no longer scroll with my mouse up or down through my email messages?

    Never had this problem before and it only happens while I am in mail.

  • Semicolon or not?

    AS/400 complained when I supplied SQL statements ending with a semicolon. Is it best practise to end with a semicolon or not?

  • Lightroom modifies EXIF after import?

    When I import photos with Lightroom, they seem to loose part of the lens data that DxO uses to process images with. For example, a photo with the lens Nikon 12-24mm f/4 AF-S will just be 12-24mm afterwards, and DxO won't know which lens algorithm to

  • Problem adding Video to Captivate Slide

    Hi, I'm having a problem adding an FLV video file to Captivate. Basically, after I've published to a SWF file, the video doesn't appear on the slide at all. It's just blank. After researching a bit, I found that the FLV file MUST include *metadata*.

  • Migrate iPhoto 2 to 4 Bad eMail Link

    I was running an old Clamshell iBook with iPhoto 4. It had auto updated to v.4 during a software update. I moved to an iMac operating 10.4.11 When I went to software update it would only update to iPhoto 2. When I tried to view my photos I could see