Problem mit bridge cs5

hallo,
die vorschau in der bridge cs5 zeigt keine beschneidungen der bilder an,die restlichen bearbeitungen im konverter werden aber angezeigt???
kann jemand helfen??

bei mir werden die beschneidungen korrekt angezeigt!

Similar Messages

Problem opening Bridge CS5 in Windows 7

When I open Bridge CS5 in Windows 7, I get a pop-up window from User Account Contro that asks "Do you want to allow the following program to make changes to this computer?" The program listed is Bridge. If I say NO, Bridge doesn't open. If I say YES, Bridge opens normally. This question pops up every time I open Bridge but not with any other CS5 applications or any other program. Any suggestions? Thanks,

This is a permissions issue within the OS. Next time you start Bridge right click on the icon and select "run as administrator" and choose yes. Perhaps it will stick that way.

Problem with Bridge CS5 and Tools Photoshop Batch

When I select several images in Bridge CS5 and go to Tool>Photoshop>Batch and try an run an Action, I receive an error message asking for the Install disk. Bridge at that point freezes until I put in the install disk and then it runs the batch action fine.
This is very annoying as I always have to have the disk in my DVD Drive.
Any points would be welcomed.
Thanks,

Go to preferences/startup scripts and make sure there is a check mark for Bridge and Photoshop scripts.

Problem using Bridge CS5

I have a photoshop CS5 and it works fine except Bridge CS5.
It works fine on my Mac OSX 10.5.8 but it does not work on my new Mac OS X 10.8.2.
When I try to open Bridge from photoshop CS5, error messeage appears and it says " Error2: photoshop is undefined.Line 1->photoshop invokeBridge(false,false,".
When I click Bridge icon, error messeage says " Adobe Bridge CS5 quit unexpectedly.
Thank you so much for your help.

Scroll-down the page you will finf legacy version.
BTW here is the direct page link.
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
Read the instruction to avoid the error.

Problem mit Bridge CS 4 nach Update auf Windows 8.1

Wenn ich in Bridge auf den Button Bearbeiten gehe und dann auf Voreinstellungen Camera-Raw gehe kommt dieses Popupfenster:
Was muss ich veranlassen, damit dieser Fehler nicht mehr erscheint. Camera Raw 5.7 ist installiert.
Freue mich auf eine schnelle Antwort.
Ich habe leider keine Antwort aus dem Forum erhalten, aber ich habe das Problem selbst gelöst:
Das CS4 -Programm muss als Administrator gestartet werden und einmal starten, ohne dass die Bridge vorher schon gestartet ist. Anschließend aus Adobe heraus die Bridge öffnen und alles Probleme sind verschwunden!!!!!
Bei mir hat es auf jeden Fall geklappt! Ich hoffe, dass anderen Anwendern damit auch geholfen werden kann.

Hallo hekame,
waren die Tips in diesem Thread nicht hilfreich?
Gruß
Sebastian
→ Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.

Probleme mit Bridge und Nikon D2X

Ich habe einen Mac mit OS 10.4.1, Photoshop CS2 und Bridge 1.0.1. Wenn ich von einer Nikon D2X Raw-Dateien auf die Festplatte übertrage, erscheint in Bridge nur ein Ikon für eine NEF-Datei, eine Vorschau des Bildes wird aber nicht angezeigt.
Was kann ich tun?

@ Wilhelm
Leider doch, laut Nikon kann Photoshop RAW-Dateien der D2x erst nach dem Update lesen zumindest bis zur Version CS.
Für CS2 will ich dies jetzt nicht unbedingt behaupten,wäre aber vielleicht eine Möglichkeit.

Copy Paste problem thru Bridge CS5 for Mac

Was attempting to copy and paste a few images from Bridge, onto the desktop. First one went fine, second and all subsequent attempts failed, as when attempting to paste I received an error message that showed the Paste feature thinking I am trying to paste the first image again (thus showing as a duplicate, and asking if it should over-write the first paste). Tried emptying the Cache via Bridge, to no avail. Stumped. Thanks for any help...
This is the error message when trying to paste. Shows the previous file name even though a completely different named file was copied:

Charles, thank you. I was doing it using the OS clipboard, unaware that Mac can only hold one item. Doing it the way you suggested, worked like a charm!
As an aside, how does one clear the OS clipboard, as from this experience, it does not automatically do so, when the next item is copied.
Once again, MANY THANKS!!
Nathan

Problem mit CameraRAW CS5

Hallo,
eigentlich sollte Camera RAW in der Lage sein 3FR Dateien einer Hasselblad H3DII-39 zu öffnen. Leider bekomme ich immer die Meldung "falsches Datenformat" .
Hat da jemand einen Tip?

Hat da jemand einen Tip?
Ja, klar! Kontonummer: XXXXXXXXX BLZ: XXXXXXXXXX. Ich bitte darum, die 30000 Euro oder was so ein Ding kostet, schnellstmöglich zu überweisen, dann kann ich dir vielleicht irgendwann sagen, wie's geht. *lol* Nein, nicht wirklich. Da wirste schon mal im englischen Forum fragen müssen, schon aus rein statistischen Gründen ist die Wahrscheinlichkeit, dass da jemand so ein DeLuxe Gerät hat, viel größer.
Mylenium

How do I get Bridge CS5 to display CR2 previews???

Dear wonderful Adobe community
I have recently upgraded to Photoshop CS5 from CS4. As far as I can read/ascertain/gather Camera Raw 6 came with the package and installed when the main installation ran.
Bridge CS4 displays my CR2 Raw file previews from my 5d MKII no problem. Bridge CS5 however does not and all I get is the statutory CR2 symbol.
Can someone please help help help!
Thanks :O)

David,
You may need to update Camera Raw to version 6.1RC (RC = Release Candidate or advanced beta).
ACR 6, which ships with CS5, was frozen a long time ago, before ACR 5.7 shipped, and it does not support some cameras supported by ARC 5.7 in CS4. I don't know if this applies to your camera model or not.
For more info:
http://blogs.adobe.com/lightroomjournal/2010/05/camera_raw_61_release_candidat.html
You might need to purge the cache after updating to Camera Raw 6.1 and relaunching Photoshop and Bridge.

Bridge CS5 just won't start up

I use Adobe Photoshop and Bridge CS5 on Windows Vista SP2.
Recently I had a nasty virus on my laptop that had eaten away some of important .dll and .exe files and thus caused problems with many software applications. However, I have cleared the system of the virus now. The faulty applications get fixed when I reinstall them.
Similarly, I did a full cleanup and reinstall of Adobe Photoshop CS5 too. I even used the "AdobeCreativeSuiteCleanerTool.exe" and made sure I had no Adobe CS products on my machine before I reinstalled. As a result of this, Photoshop CS5 works fine, but Bridge CS5 fails to start up.
I see the below error when I try to launch it.
"View problem details" has the below error:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Bridge.exe
Application Version:    4.0.0.529
Application Timestamp:    4b963c03
Fault Module Name:    StackHash_125c
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c0000005
Exception Offset:    00000000
OS Version:    6.0.6002.2.2.0.256.6
Locale ID:    2057
Additional Information 1:    125c
Additional Information 2:    9b3592ed64a27c592a7af24f98f443be
Additional Information 3:    ae00
Additional Information 4:    dbfb7d8c93ebb2b659df41c8f667c75a
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Under the Windows Event Viewer, I see the below:
Log Name:
Application
Source:
Application Error
Date:
11-01-2012 9:17:00 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
AdarshR
Description:
Faulting application Bridge.exe, version 4.0.0.529, time stamp 0x4b963c03, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x00000000, process id 0x13c4, application start time 0x01ccd0a6399d4b20.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-01-11T21:17:00.000Z" />
<EventRecordID>95544</EventRecordID>
<Channel>Application</Channel>
<Computer>AdarshR</Computer>
<Security />
</System>
<EventData>
<Data>Bridge.exe</Data>
<Data>4.0.0.529</Data>
<Data>4b963c03</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>00000000</Data>
<Data>13c4</Data>
<Data>01ccd0a6399d4b20</Data>
</EventData>
</Event>
I have tried installing the latest Adobe Photoshop CS5.1.
I have even done the option of resetting preferences by holding down Ctrl key while launching Bridge.
I have also tried deleting everything under the below directory:
"C:\Users\Adarsh\AppData\Roaming\Adobe"
I am convinced it is not a problem with Bridge CS5 but that of a module / dll that Bridge depends on. Unfortunately, due to the limited information I see in the error report, I am not able to go any further.
I am breaking my head over this from the past two weeks and been completely out of luck. Any help offered to resolve this issue would be greatly appreciated.

Did you do the virus scan yourselt for have it done in a shop?
The problem according to your report is
Fault Module Name: StackHash_125c
It looks like this may be a virus. But check online and see what others say.
Sorry I do not have better news.

No MPEG preview or playback in Bridge CS5

After doing a clean install of CS5, everything seems to work well except for Bridge.
HDV mpeg clips will not display a visual thumbnail
or playback in preview window of Bridge. When double-click
ing icon, I get an error "Windows
cannot find '%ProgramFiles(x86
)%Windows Media Player
\wmplayer.exe'.
When I double-click an AVI file, Bridge finds and uses Windows Media Player just fine.
Need MPEG preview badly!!!!
MPEG clips are working fine in Premiere Pro CS5 and AME rendering is awesome!!!
Thanks, rg

Hi Rick,
Regarding br asc's reply:
can you purge the video file in thumbnail panel to get new thumbnail?
I can playback mpeg video in bridge on my windows 7 64bit machine.
I am not sure what you did or what exactly did br asc meant.... Anyhow, let me describe my problem and what I did to overcome it:
My Problem:
In Bridge CS5 version 4.0.2.1, I am having problem previewing .MOV files. My .MOV files are from various source such as iPhone, 5DII, 7D, 550D and a few camcoders. The funny thing is some .MOV files preview ok while others not. It is not source dependent either as I've checked, by that I mean something like I have two .MOV files from say, the 5DII, with exact same settings when recorded, why does one preview ok and the other not in Bridge CS5???
What I did:
(1) In Bridge, go to menu
Edit > Preferences (or Crtl K for Wins), go to the File Type Associations (on left pan) and make sure QuickTime (.mov) is associated with your QuickTime Player on the right pan.
(2) In Bridge, go to menu
Edit > Preferences (or Crtl K for Wins), go to the Cache (on left pan) and click the [Purge Cache] button on the right pan to Purge All Cached Thumbnails and Previews.
After doing (1) & (2), I am able to preview every .MOV in Bridge CS5.
Not sure what I have done different to anyone else, but it seems to work for me. Hope it helps...

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Hidden network drives "home" and "net" shown in folder view Adobe Bridge CS5 / Lion Problem

Updated to Mac OS X 10.7.2 Lion and got this "problem":
The hidden network drives "home" and "net" shown in folder view Adobe Bridge CS5 (unlike in 10.6 Snow Leopard).
Normally these network drives are hidden (in Finder and other Apps) - but Adobe Bridge CS5 is showing them, despite "show hidden files" is unchecked in Adobe Bridge.
Not a dramatic "bug", but it also shouldn't be a big problem for Adobe Bridge engineers to solve this. My first question to the Adobe Support was answered like: "we don't know what Apple did change, so we cannot do anything". Hmmm, are you serious?
I tried to resolve that problem by myself but failed. So, if an Adobe engineer is reading this post: perhaps Adobe Bridge is ignoring the automounter master map (that was my approach to resolve it):
# Automounter master map
+auto_master                    # Use directory service
/net           -hosts                 -nobrowse,hidefromfinder,nosuid
/home                                        auto_home       -nobrowse,hidefromfinder
/Network/Servers               -fstab
/-                              -static
You cannot do anything to these folders, so it is not a serious issue, but, I mean, did someone at Adobe check compatibiliy with 10.7 and ignored this issue? If so, are there an other issues ignored?
But I guess, the compatibilty update for Bridge CS5 for Lion is Bridge CS6 - to be fair: I also have to say, that in general Bridge is running okay on Mac OS X 10.7.2 (but could be better, as always;)

Hi Curt Y,
thanks for your answer! Yes you' re right, I forgot to mention that ... before I posted here, I sent a bug report via the Apple Bug Report webpage about the issue ... of course, here are 2 parties involved.
I had a similiar problem once and I got a meesage back from Apple: "that it is a 3rd party problem, sorry" (it was about color management).
I am just a user and I often feel very strange about Apple's (topsecret) communication behaviour ... Whatever, what do I know about software engineering? - Right.
Maybe someone on this forum has an idea, because I'm afraid, thus it is not a serious bug, no one would take care about it in the next time (during my research I found an older post here on the forum about the same problem ...).
thanks for help in advance,
jobumac

Bridge cs5 camera raw 6.5 to 6.5 and new bridge cs6 preview problem

Hi,
when i actualize camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and it last few seconds with the yellow exclamation mark.
Months ago the only solution i found after several instals was to turn back to camera raw 6.5.
Now im trying beta bridge cs6 and problem come back for me again.
I use Nikon D3x with 14 bits ~49MB .nef files in Windows 7 64 bits.
Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
Thanks
Arménio Teixeira

Frau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

Problems with Image Processor in Bridge CS5

I just installed Photoshop and Bridge CS5, and I'm having a couple of problems. First, I can't update to Bridge 4.02. I've downloaded the installer and tried to run it, but I get an error message. All it says is that it can't run the update. The same thing with the Camera Raw updater. The most immediate problem I'm having is that Image Processor in CS5 seems to run differently from how it runs in CS4. Specifically, if I select a bunch of files in Bridge, and ask Image Processor to run an action on them and save to the same location, which is what I've been doing ever since CS2, it opens the files in Photoshop, and leaves them open. This means that pretty soon I've got far too many fiiles open, and my Mac can't cope with it (an iMac Core Duo 2.16Ghz with 4 GB of ram). It also gives me an error message at the end saying it can't process the relevant files, even though it has processed them! In previous versions of Image Processor, it would open the files to run the action, convert to sRGB, etc. and then close each one after saving it to a new folder named "JPEG". How can I get the latest version to behave like this?

Nevermind... I restarted Flash and it miragically appeared! Yay CS5!

Problem mit bridge cs5

Similar Messages

Maybe you are looking for