Problem mit Macbook pro 2011 late

Ich habe ein grosses Problem weil Thunderbolt kein Signal mehr hat. Ich kann den Externen Monitor nicht mehr betreiben und auch ein Thunderboltdock funktioniert nicht. Das Macbook pro wurde schon einmal noch während der Garantiezeit repariert, weil das Problem schon einmal aufgetaucht ist Nun ist das Macbook schon wieder defekt und ich habe einfach keine **** einen soooo grossen Betrag für die Reparatur zu bezahlen, wenn das Gerät dann nach einiger Zeit wieder kaputt ist. Ich hoffe, dass Apple diese leidige Geschichte endlich an die Hand nimmt und uns den Computer wieder in Ordnung bringt. Ich würde, müsste ich nicht alle Software neu kaufen auf jeden Fall nicht mehr Apple kaufen!!!!!
Freundliche Grüsse reinoldfromuenchringen

I would say try a different charger and see if it works.  See if you can find someone that has a charger plug it into your computer, see if that makes a difference.  If it does, you know it is the charger, if it doesn't, then there is something else going on.  You could also take it to a Genius Bar and they'll plug it into on one of their chargers and let you know what is going on as well if you wanted to go that route or don't know anyone with a charger you could try.

Similar Messages

  • Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unrespo

    Problem description:
    (MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unresponsive, requiring forced power down.  Randomly logs off.  Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access.  Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed.  Currently 169.99 GB available of 249.2 GB capacity.
    Help?
    EtreCheck version: 2.1.8 (121)
    Report generated March 21, 2015 at 11:35:35 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Late 2008) (Technical Specifications)
        MacBook Pro - model: MacBookPro5,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        2 GB RAM Upgradeable
            BANK 0/DIMM0
                1 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                1 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 59
    Video Information: ℹ️
        NVIDIA GeForce 9400M - VRAM: 256 MB
            Color LCD 1440 x 900
        NVIDIA GeForce 9600M GT - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
    Disk Information: ℹ️
        Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS21N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.kodak.BonjourAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        Disconnect
        Add To Amazon Wish List
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        Tuxera NTFS  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
        Destinations:
            Backup [Local]
            Total size: 63.67 GB
            Total number of backups: 1
            Oldest backup: 2015-02-23 16:16:08 +0000
            Last backup: 2015-02-23 16:16:08 +0000
            Size of backup disk: Too small
                Backup size 63.67 GB < (Disk used 80.29 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    loginwindow
             0%    AppleSpell
             0%    SophosUIServer
             0%    SophosAntiVirus
    Top Processes by Memory: ℹ️
        118 MB    InterCheck
        101 MB    SophosScanD
        60 MB    Dropbox
        54 MB    mds_stores
        41 MB    SophosAntiVirus
    Virtual Memory Information: ℹ️
        49 MB    Free RAM
        682 MB    Active RAM
        652 MB    Inactive RAM
        315 MB    Wired RAM
        1.49 GB    Page-ins
        2 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 21, 2015, 11:18:52 AM    Self test - passed
        Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
        Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

    Linc Davis wrote:
    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
    Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
    The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB  RAM installed.  The Etrecheck report can be very informative if one takes the time to examine it. 
    Ciao.

  • My macbook pro 2011 (late) have blackscreen on startup?

    i have macbook pro 2011 (late)
    i go holiday 3 days and i'm not use my macbook and i go back from holiday and i have blackscreen on startup..
    and if i want repair to apple how to make appointment? i'm live in taiwan
    anyone can help me?

    First, try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Intel-based Macs: Resetting the System Management Controller

  • 2wire problem on macbook pro 2011!

    I have the most recent macbook pro and the moment I received it I have been reading through endless amounts of forum pages. My problem is my Airport being able to recognize my network but unable to get an IP address. It keeps self-assigning one and cannot connect to the internet. I have tried manually putting in the IP addresses etc, restarting both my macbook and router, adding DNS servers, and SO MUCH MORE! My macbook connects with a wire, but wirelessly... it's useless. I have to admit I havn't used every single method possible, but most of the solutions given on other forums are quite futile. On a side note, my airport utility is unable to find any airport wireless devices, if that's of any use. I do not own a Airport extreme, just a 2wire router.
    I have a 2wire 3800hgv-b running on ATT u-verse. with a macbook pro Mac OS X version 10.6.7
    PLEASE HELP!!

    Can you connect elsewhere, like at your local library or internet cafe? If not, then you may have some sort of a hardware problem with your wireless card.
    Can another computer or device connect to your router? If not, then there may be some sort of problem with the router. Also, check the cables and their connections, and try a different cable if you have one. Maybe try a different channel in case there is some sort of interference.
    I'm not sure, but I think the Airport Utility is just for Apple branded devices, so it may not mean anything that you can't see the router.
    If you find you cannot connect at all wirelessly, then contact Apple or visit an Apple Store for diagnosis. You could have an underlying hardware problem of some sort.
    Good luck!

  • Problem with Macbook Pro 15 (Late 2007)

    What I did is that I tried to install a 500gb threw the macbook. Then suddently, the macbook pro did not wanted to reconize the gb that I put in. I tried all the shortcut keys and none of them work. It only stayed with a Apple Logo with the circle on the bottom spinning. It freezes sometimes. I tried everything, & it still freezing and did all the trick.
    Yesturday, It did not decided to turn on. The screen did not want to turn on. The blinking light on the bottom did not want to turn on also. I clicked on the power on but it actually turned on but the screen and the blinking light did not wanted to turn on. I tried on the keyboard, & it did not wanted to turn on the lights. I tried everything my best to get it back working.
    Please help me with this problem. Maybe for me I think its the logic board. I'm not sure because once I got it, It was working 100% except for the apple and circle on the bottom spinning.
    Thank you for reading and helping,
    DaddyCorrupted

    You must first prep the new drive then install OS X on it:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Airdrop issue on Macbook pro 2011 late

    Hello everyone,
    - I ve a MBP 2011 late.
    - I've just upgrade to Yosemite.
    - I want to use AirDrop to share file with IPAD mini.
    - Wifi on, Bluetooth on, on both devices.
    - Both devices can get the "connected" status through bluetooth but sharing file is impossible. When sending file from MBP to Ipad mini through bluetooth, it says: "your device doesn't support the....services"
    - When opening Airdrop window in the Finder of my MBP, it cannot see my Ipad mini, nor the Ipad retina of one of my friend.
    - Airdrop sharing is Ok between both IPAD.
    - I've check system preference of the MBP.... among them: no firewall and no connection blocked in the privacy and security settings.
    Anyone else with the same problem?
    Anyone else have sorted out that problem ?
    Does this issue come from the upgrade ?
    May the next update of Yosemite resolve this issue ?
    Any other idea ?
    Thanks for your answers in advance.

    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model. "Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices" .

  • Problem with macbook pro 2011

    my macbook pro is turning on,but i can't click anywhere on the screen,only scroll.it is that way even in safe mode and in the recovery mode.any ideas how can i fix it.
    I olso can use the buttons combinations (i am not familiar with them though)

    Run through this list of fixes
    ..Step by Step to fix your Mac
    If  it's too much for you and especially if your under the 90 days free  support or AppleCare, then take it to them or a local PC/Mac  software/data recovery specialist.
    Hardware repairs should be taken care of by Apple.

  • Trackpad Problem on MacBook Pro 2011 with bootcamp windows 7

    I am running Windows 7 in bootcamp on my 13 inch MBP 2011.
    I am really pleased how smooth the installation went and everything so far works as it was on my old windows mashine.
    Just the trackpad is not running very smooth.
    I reduced the scrolling down speed so the scrolling with two fingers is quiet alright now. But I have a problem with this touch to click function. Very often when I write I touch the trackpad with the palm of one hand and this results in actions like my text is continued in another line or suddenly whole paragraphs are highlighted or any other odd behaviour.
    I thought to take the touch to click function off but I can't even find the setting in the windows control panel.
    There are only the pure standard driver settings available in the control.
    Can anybody tell me if there is a solution? Actuallly I like this touch to click, it's working very well when I use the trackpad. I know in other machines you can set a function that it's regonized if you put your finger on a trackpad or it's your palm whilst your writing, or the trackpad disables itself when the keyboard is used.
    Is there maybe a better driver for the new MacBook trackpad under windows seven...or do I even have maybe a wrong driver onboard?
    Thanks for the help!
    Greetings from Melbourne
    Message was edited by: Kattinka07
    Message was edited by: Kattinka07

    Hi psheraton,
    I have found now some setting so that I can first at all live with it. Nevertheless i would be very thankful when Apple would work the touchpaddriver over so that it works smoother. Its such an nice device and the big touchpad is great but its realy working very poor under bootcamp.
    Maybe you try my settings:
    First at all start bootcamp from windows system, and go to the trackpadsettings. Take out the touch for klick. You can forget working with this as when you write it just hops wherever it wants.. as I wrote before, youre suddenly write on in a completly different paragraph...that impossible to use with this settings.
    Its a shame as acutally using this touch to click in other applications than writing is very smooth and good.
    Other notebooks having an automaticle regonizion function which notices when your accidently put your wrist or palm on the touchpad whilst using the keyboard. Thats certanly what is needed here es well, especially because of the huge touchpad.
    Next you have to go to the windows mouse driver which is not in bootcamp but in the standard Windows system settings and adjust the scroll speed down to 1 on each of the two functions there.
    This then takes the overdose of speed away when you use two fingers on the touchpad to scroll.
    Having it set to more than 1 is not usable either.
    These are the setting how I have build myself a workaround for the moment.
    But as I said...please please Apple work at this touchpaddriver together with Microsoft to get more out of this wonderful trackpad.
    Hope this helps you liking your device a bit more....only Apple could help us further now...

  • Macbook pro 2011 late md322 will not charge

    Helppp !!!
    What should I do?
    I bought this mac 20 days ago

    Hi, my friend had this happen. It turned out to be a hardware fault, whereby the sensor that detetcs that the lid is closed had died.
    Fron what the AASP, who fixed the issue, advised it is quite common place and only repairable by an AASP.
    If you are under Applecare, you can make a claim. Alternatively, contact your local AASP and have the machine evaluated, and the repair quoted.
    Good luck.

  • Macbook Pro 2011 - Apple It's time

    Hi,
    So I'm the owner of a new second-hand 17" Macbook, for years I've dreamed of getting one of these and today was finally the day it happened. Specs are
    Macbook Pro 2011 Late
    i7 2.4Ghz
    6770m
    8gb RAM
    At first the laptop booted up fine so I decided to do what any new proud macbook owner would do, show it of at work. During the course of the day I experienced intermittent freezing issues and eventually a blue screen of death. I thought to myself that I must of brought a dud and immediately went to contact the person I brought it of for a refund. Being a genuine trader he was more than happy to oblige and give me a full refund. Frustratingly this macbook had already grown on me enough to the point where I was determined to research into solution. Initially I suspected a HDD fault so I went to attempt a apple internet recovery, all that solved was my blue screen of death and changed it to a grey screen of death. Digging deeper it was clear from countless others in my situation that the issue was being caused by the GPU.
    Now I'm no apple genius but I have enough of a computer technical background to know when something has not been done right. Now clearly apple has done wrong in the manufacturing process of GPU soldering and thermal paste application. This issue is nowhere relevant to software except for the point in which the system switches from the integrated to the faulty discrete GPU like it's suppose to in high-intensive tasks. Having this macbook for only a day and some determined researching its pretty simple to join the dots. The soldering process and material they used was doomed to fail from the start, eventually all 2011 models with discrete GPU's will burn out, it just depends on how well their owners have taken care of them. In regards to the thermal paste application you will be able to see from my images the kind of care and pride apples has undertaken in applying it. There was more around the CPU & GPU than there was on itself, that's like having a peanut butter and jelly sandwich with most of the peanut butter and jelly smeared around the plate. Considering this laptop would of cost close to 4500NZ back in the day I can't imagine what other original 2011 Macbook owners are feeling.
    What makes it worse is that apple techies you go to will say a full logic board replacement will be needed from your own pocket when your macbook was already doomed, isn't that a way to rub further salt into the wounds Apple. Opening up my macbook it was obvious to see that the logic board inside was not the original and sometime during it's lifetime it too had a full logic board replacement. However I can't say if it was for the same reasons. Regardless it's obvious that replacing the logic board does not solve the issue and wastes everybody's time and money.
    Apple, these macs require two things.
    -A solder repair for the GPU
    -A re-application of thermal paste
    It's really not that much to ask considering the worth of these laptops, also wouldn't you rather have these leaving a legacy of the ultimate desktop replacement than apples shameful ticking time bomb?
    I'm typing this of the very macbook having these issues so for anyone who wants a temporary fix please refer to the free gfxCardStatus software which allows you to force integrated graphics only. For now it's stable but dreadfully hinders the potential this beast was made for.
    "Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations."
    "Quality is more important than quantity. One home run is much better than two doubles."
    Steve Jobs
    In hopes that apple does not remove this post.

    There is excessive swapping of data between physical memory and virtual memory.
    That can happen for two reasons:
    You have a long-running process with a memory leak (i.e., a bug), or
    You don't have enough memory installed for your usage pattern.
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the  Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
    View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command: 
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

  • MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

    Hi,
    I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
    When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
    I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
    I tried these things:
    - Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
    - Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
    - SMC, PRAM reset on both devices
    The cable works, because:
    17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
    I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
    After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
    Retriggering CMD+F2 or replugging breaks it again with massive bugs.
    The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
    Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
    The 6770M of the 17" is working well.
    Sample Video:
    http://www.youtube.com/watch?v=W_pgc52syes
    All updates/firmware updates of iMac and MacBook Pro are installed.
    Any solutions?
    Greets,
    Kai

    Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness.  I suggest that you post your thoughts here:
    https://www.apple.com/feedback/

  • Macbook pro 13" late 2011 stuck up at apple logo and spinning wheel, changed HDD problem still exists

    i have a macbook pro 13' late 2011 unit and its not starting up, found out that the HDD was defective, but when i changed the HDD the problem still exists, what may be the problem?
    thanks

    Have you tried booting into the Recovery HD and running Disk Utility and checking to see if the HD needs repairs?
    Restart holding Command + r and at the recovery screen select Disk Utility. Then select Macintosh HD and click  on 'repair disk'. If anything gets altered click on repair disk again until you get a clean pass. Restart as normal from the Apple menu. More info here about the Recovery HD:
    http://support.apple.com/kb/HT4718

  • Wi-fi problems  in me new macbook pro 13 late 2011

    hallo aim having problems with the wi-fi in me new macbook pro 13 late 2011, it seams to always be log on and off and i can't get a stabled connections other divides in the house work fine with the wifi(pc etc..)

    If the MBP was purchased within the last year take it to the Apple store
    or contact Apple. There are few threads in this site dealing with the same issue.
    There is no single sure shot step to correct this problem.
    May be you can go through those discussions and find a solution.
    Best.

  • I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?

    I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
    and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.

    Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
    It also means the dedicated graphics card will be used less, but only so slightly less.
    You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
    You can also run Cinebench and compare the scores here
    Mac video card performance

  • MacBook Pro 13'' late 2011 battery health problem!!! HELP!!!

    I have a MacBook Pro 13'' late 2011.
    It's this normal? How do I increase my battery health?
    Can I change my battery?

    When did you buy it?
    Do you run it down to near zero % before recharging? Which is a bad thing to do.
    Do you charge it to 100% before you take it off the charger?
    Do you always disconnect the charger once it reaches 100% even if you are right next to an AC outlet. Which is a bad idea.
    Batteries only last so long. Over use it and it will go bad sooner.

Maybe you are looking for