Problem moutning in xp-cannot choose the disk i want!

i've got a g3 server running on my network, and it has three hardrives in it. i want the pc to mount one of the harddrives which is NOT the startup disk. XP doesn't give me the option of what disc to mount, as OS X does. how can i get arround this? thanks in advance!!

Ok.Merci. I will make a test. I've been working with this software now for few months and I should say that a simple back up or moving our projects to work from a computer to another it's quit a challenge with FCP X compare to 7 . I guess we'll get use to it !! Thanks a lot for your support Tom

Similar Messages

  • HT201412 my ipod touch is randomly playing songs on its own. i cannot choose the song I want to hear it continuosly skips several songs and then suddenly plays it. also the album cover does not match the song playing

    My ipod touch is randomly playing songs on its own. It skips several songs then suddenly stops and plays that song. If i try to select a song it will not play that song it keeps skipping over severla songs at a time then plays again. The album covers do not match that song that is playing and now its not connected to wifi. I need help

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

    My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

    Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    and PRAM How to Reset NVRAM on your Mac - Apple Support
    If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not.

  • My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem.

    My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem

    The frist thing to try is a drive-n disk. They are cheap (US$5-15) and easy to use. Many unresponsive drives, even ones declared "dead" by an Apple tech, have returned to service after a cleaning.
    Check with home entertainment specialty shops, electronic superstores and office supply outlets that sell computer accessories.

  • I can't install OS X mountain Lion to my macbook pro. It says when I'm trying to choose the disk, (This disk is used for time machine backups'. What can I do about it? thanks!

    I can't install OS X mountain Lion to my macbook pro. It says when I'm trying to choose the disk, (This disk is used for time machine backups'. What can I do about it? thanks!

    From the Finder's Go menu, choose Computer:
    Double-click your hard disk icon. It is usually named "Macintosh HD":
    Look for this folder:
    Drag it to the Trash.

  • Hi I just updated from Snow Leopard to Mountain Lion. I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk. My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standar

    Hi I just updated from Snow Leopard to Mountain Lion.
    I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
    My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
    Can I fix this problem?

    Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
    I followed the instructions and removed from /System/Library/Extensions/ the following files:
    IOFireWireSerialBusProtocolTransport.kext
    IOFireWireAVC.kext
    IOFireWireFamily.kext
    IOFireWireIP.kext
    IOFireWireSBP2.kext
    I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
    The System Profiler says "No FireWire ports were found."
    So this tells me that the FW port is probably the culprit and is messing up the installation.
    So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

  • I cannot choose the MX skin for the help

    Hi,
    I am in the process of testing RoboHelp8, and I am generating layers for some old projects.
    Everything is OK till now, however for some reason, I cannot choose the MX skin for my Flash layer.
    I used in the old projects the MX skin, however now when I try to select it, I press the OK button and nothing is happening.
    I can select however any other skin. Only the MX does not want to select.
    Did anybody met this issue till now?
    Thank you,
    Bogdan Marin

    iTunes Store: Invalid, inactive, or illegible codes

  • I was using my flashdrive, then ejected. 5 min later I reinserted to be told "this machine cannot read the disk" Why would that be ?

    I was using my flashdrive, then ejected. 5 min later I reinserted to be told "this machine cannot read the disk" Why would that be ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • Instead of running firefox.exe, computer asks me to "choose the program you want to use to open this file".

    When I click on either the firefox shortcut or firefox.exe in the Mozilla folder, instead of running, the computer asks me to "Choose the program you want to use to open this file: firefox.exe". The recommended program is Adobe Reader 9.1, which obviously doesn't help.
    I have uninstalled firefox and downloaded it again, but now I am trying to run Firefox Setup 4.0.exe, and it asks me again to "Choose the program you want to use to open this file: firefox setup 4.0.exe" Help?

    This is a registry problem with your .exe entry
    The below program worked for me on my vista machine.
    http://windowsxp.mvps.org/exefile.htm
    You can download an exe file from there that automatically sorts the issue or you can edit the registry manually.

  • My problem is that i cannot see a picture i want to tag

    My problem is i cannot see the picture i want to tag.Unlike before,i do tag pictures to my photo album without stress.About two weeks ago,my glasses got broken;so my hand press something,firefox showed me that i will no longer see pictures again.
    == This happened ==
    Every time Firefox opened

    See [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load
    Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
    A way to see which images are blocked is to click the favicon (''Site Identification'' icon) on the left side of the location bar.
    A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
    Open the ''Media'' tab of the "Page Info" window.
    Select the first image and scroll down though the list with the Down arrow key.
    If an image in the list is grayed and there is a check-mark in the box "''Block Images from...''" then remove that mark to unblock the images from that domain.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT5037 I followed the above instructions and after I choose the library I want to upgrade and hit continue it wants to open my iPhoto to convert, when I click yes it just gives me the original message and sends me back to this page. Am I missing something

    I am trying to get photos off of my airport time capsule back up onto my new macbook pro. I followed the above instructions and after I choose the library I want to upgrade and hit continue it wants to open my iPhoto to convert, when I click yes it just gives me the original message and sends me back to this page. Am I missing something?

    Is your Time Capsule being used for your TimeMachine back up? Or is it simply being used as an external hard drive?
    To use a TimeMachine back up you must first restore it
    LN

  • How do I choose the airport I want to connect to?

    I have an airport extreme and an airport express.  Both are configured and were working great til a week ago, my wifi status shows less strength and internet is slow.  I opened airport utility and it shows that I am connected to airport extreme in basement.  I want to connect to airport express on second floor, but I can not see how to choose the airport I want to use.
    Thanks in advance for the help!

    Shut off the wireless and restart.. nothing is perfect.. Apple stuff roams very well, but it is never perfect.. turn of wireless and stand next to the express and turn it on again.. it should connect now to the express.
    BTW the signal might be stronger at the express but the speed will be halved if you use wireless extend.. it is double hop wireless.. whereas slower speed to the extreme will transfer faster as it is single hop.
    This doesn't apply to ethernet connected WAP.. but does for wireless repeater setup.

  • HT4914 can i choose the songs i want icloud to have?

    Can i choose the soings i want icloud to have?

    Then DIY here using computer iTunes:
    1. Select a title (.mp3 or .m4a) in your iTunes Library
    2. Do File > Get Info on selected title (Windows do Edit > Get Info)
    3. In the dialog choose Options tab
    4. Set Start Time and End Time (no more than 35 secs otherwise won't work)
    5. Close dialog.
    6. Now control click the title (right click) and choose Create AAC Version
    7. When it is done, drag the newly create title to the desktop.
    8. Delete the newly create title in iTunes.
    9. Rename the title on your desktop from ringtone.m4a to ringtone.m4r
    10. Drag and drop it into iTunes
    Now you have a ringtone.
    Make sure it is selected in iTunes for syncing with your new iPhone.

  • Time machine backup problem with upgrade to Lion - Choose Backup Disk button non-existant

    Hi, I just upgraded my mac mini to Lion and have encountered a problem with by Time Machine. It no longer sees my networked drive for back up. So, I followed the instructions on this site http://code.stephenmorley.org/articles/time-machine-on-a-network-drive/ and get to item 6b. and have a problem I have not been able to sort out. Instead of the button "Choose Backup Disk" on the Time Machine window, I have a button "Select Disk" with a button "Options" under it. When I click "Select Disk" I get a window promtping me to "Set Up Other Time Capsule" and clicking that takes me to a window for AirPort Utility. (screen shot )
    Anyone know why I don't have the right button for starters and why I can't access any drives on my machine at all? I followed the web instructions on the site I mention above because initially I had an error about AFP, so suspected the drive set up here (it is my work) is incompatible.
    (The only IT guy we have is on vacation for 2 weeks and then I am on vacation for 2 weeks and can't wait a month in order to back up! Thought I would try here to see if I can get answers before I am away.)
    Thanks in advance!

    i had a similar problem when I first installed Lion last year.  It seems that some network NAS products need a firmware update to work with Lion.  I contacted the manufacturer and they helped me out.  I am using a Synology NAS system.  Problem solved after firmware update. 

Maybe you are looking for