Problem moving window with pointer

I'm having an odd problem with the finder. I'm running 10.4.7.When I click on the title bar of a finder window, or any application window to move it on the screen, I am able to move the window in any direction except down. The window stops moving, and the pointer continues, leaving the window behind. If the pointer then happens to "land" on anything selectable, it will pick that up instead. Anyone else having this problem?

Nevermind. My mouse is broken......

Similar Messages

Moving windows with the keyboard

Is there a way to move windows with the keyboard? Surely there must be???
Thanks for any help,

F9-F11 keys uses Exposé to hide/move windows. Is that what you have in mind? BTW, Mac OS X ain't windoze. Since you appear to be a newcomer to the Mac, peruse Switching from Windows to Mac OS X and Basic Tutorials on using a Mac

Graphic problem in Windows with Boot Camp?

I only just noticed this today when I was editing some pictures in Photoshop using Windows (Boot Camp). My version is Windows 8 64-bit and the Photoshop is CS 6 but I suspect the same thing would happen even if I were using Windows 7.
Whenever I view an image in Firefox, Chrome, Windows Picture Viewer or any other program besides Photoshop, the image is always displayed as it is and appears as crisp and sharp as it should. For example, if I load a picture that's 600x600 pixels outside of Photoshop, it would look exactly like it is - at 600x600.
But once I open it in Photoshop, and if it happens to be a very big picture (which it is for me, most of the time), the picture would look resized (i.e. smaller), but the Photoshop navigator would still say it's displayed at 100% magnification. So a 2000x2000 picture would basically look half its real size but still be at a zoom setting of 100% according to Photoshop.
That in itself isn't the problem, but trying to edit/crop the image is. If I were to select a part of the picture and resize it to, say, 100x100 pixels, the final image would be a bit blurry, even if I save it at "most high" quality. That obviously makes my image "un-usable" because the quality is so terrible. This doesn't happen at all on a computer without retina display but on mine it makes the task of editing images in Photoshop frustrating and pointless.
I really think it's an issue with retina display's native resolution not being supported in any version of Windows, so I'm hoping anyone who uses a Macbook Pro RD, Windows AND Photoshop could help me get around this problem.

Did you grab and install the graphic driver from Nvidia?
Apple or even Microsoft driver are not always the best.
Boot Camp 5.0 drivers to start just to enable the various chipsets and basic support.
http://www.bing.com/search?q=Windows+8+MacBook+Pro+Retina+cuda+driver+Nvidia
http://www.anandtech.com/show/6008/windows-8-on-the-retina-display-macbook-pro
http://blogs.nvidia.com/2012/06/new-macbook-pros-make-for-great-cuda-dev-platfor ms/
http://www.geforce.com/drivers/results/59645
https://developer.nvidia.com/cuda-downloads
https://devtalk.nvidia.com/default/topic/528725/forcing-retina-macbook-pro-to-us e-intel-graphics-for-desktop-freeing-memory-on-cuda-device-/
I see a black screen or distortion when I install Windows 8 on a MacBook Pro (Retina, 13-inch, Late 2012). How do I fix this?
The Windows 8 installer does not contain the correct graphics driver for your computer. You'll need to attach the USB media that contains the Boot Camp drivers during installation to address this issue. See this article for more information.
http://support.apple.com/kb/TS4517
www.apple.com/support/bootcamp
Windows 8, Thunderbolt devices are being recognized when I connect in. How do I fix this?
Disable the Windows 8 Fast Boot feature to allow Thunderbolt devices to be recognized. See Boot Camp: Thunderbolt devices not recognized after Windows 8 upgrade for instructions.
http://support.apple.com/kb/TS4531
Also with any GTX you may want to see if there is a CUDA driver as well.
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors
Also, Intel 4000 graphic driver, switching between Intel HD and Nvidia has been a problem.
From my (now old) notes:
I had problems with windows 7 after the installation using boot camp. The GT 650M was not showing up as the graphics adapter. I fixed the problem by inserting my windows support software CD a second time. I did not let it use auto run. I went into the Windows 7 directory and then into the Nvidia directory and ran setup.exe. This installed the Nvidia drivers for me. If this works correctly, you will have an Nvidia control panel available to you. I set the resolution to 2880x1800. I also set windows to 200% magnification.
I think what happens is that after you install windows, and then run the windows support CD, the main boot camp setup script seems to stop on the nvidia driver install--everything else installed correctly.
The 2012 MacBook Air suffers from an EFI firmware bug that under Windows blocks turbo mode.
Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems2012 MacBook Air plagued by audio noise with Apple's Thunderbolt display
Intel Windows 8 Graphic Driver
Intel Download Center: http://downloadcenter.intel.com/
3rd Generation Intel HD Graphics 4000 Windows 8 64-bit
http://www.guru3d.com/news/intel-whql-graphics-driver-windows-8-download/
http://www.zdnet.com/blog/hardware/windows-8-an-installation-walk-through/14768
http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/

Problem moving folders with Lightroom 4.4 on Mac OS 10.7.5

I am trying to move a folder of recently edited files from my desktop to an external drive where I keep all my processed files using Lightroom but I keep getting a message that the folder can not be moved.
If I try to create a new folder on the external drive using Lightroom I get a message saying the folder could not be created.
This has just happened for the first time. I have never had issues with this in the past and have successfully moved many folders over the years.
I tried rebooting Lightroom to no avail.
Any suggestions?

Make sure you have write permissions on the destination disk. You may need to repair permissions.

Problems installing Windows with Boot Camp

Hello,
i am having this strange issue with boot camp. i have my windows 7 install dvd and go through all the standard boot camp procedure's, but once its finished partitioning the disk and restarts it just opens up to the apple logo on a grey screen, no spining logo, no status bar, nothing! ive left it for 6 hours on this screen 2-3 times now and nothing is happening. when i turn off and on again it just goes to a black screen telling me to install a bootable device and press any key. BUT THE INSTAL DISC IS IN!!! its driving me insane!
windows was burned to a dvd using disc aid and the .iso copied over fine and was verified and everything. the machine im trying to get this to run on is a 15 mbp 2.66 i7. the optical drive has been replaced with a 120gb ssd and there is a 1tb internal sitting in the hdd bay. i dont know if that has any relavance to this issue? i boot osx 10.7 (mountain lion) off the ssd and am trying to boot camp my hdd, but that couldent cause issues could it?
ive had a look around the other disscussions and fourums for 4 days now and i think i have seen nearly every bootcamp related youtube video there is! AND IT STILL DOSENT WORK!
if any one has ANY idea or sugesstion on how i can rectify this issue it would be greatly appriceated.
thanks for your time!
Harry.

"You can't do both boot drive and storage drive on the same drive.
A boot drive requires (all data off first) it to be formatted GUID and OSX Extended Journaled, then OS X installed, then option key at boot to select that HD OS X boot drive, then BootCamp proceedure ran and install into the partition it creates on the HD."
THANKS AGAIN, i think im getting closer to a solution, i really dident think that simple old bootcamp could become so complicated!.
so i couldent (boot off the ssd as normal) and then create a seperate partition on the hdd of about 30gb, install osx on it, boot from that (with the optical bay back inside), create a thrid partition on the hdd via bootcamp then instal windows?
its just that erasing and reformating the hdd sounds a bit scary, its taken months of getting the permissions and fixing rouge ubd processes all right so everything works perfectly and seamlessly together with the ssd+hdd combo
"You can replace the data back into OS X on the HD and use that as extra storage, but your main use OS X user(s) needs to remain on the boot SSD.
To do this you need to use Carbon Copy Cloner to clone the OS X boot partition of the SSD to the blank/empty of data HD, this will copy all the Users accounts accuratly so you can access them from the SSD.
As you can see here, I can access the same user folders of my cloned partition from the original partition, no "-" minus signs on the folders as I'm the exact same user.
I am currently booted into Macintosh HD and accessing my same named user folder on the clone on Macintosh HD 2.
So basically OS X on HD will become your new "Storage Drive"
this is pretty much exactly how im set up at the moment! with the user account and applications on the SSD and libarys like iphoto, itunes etc are on the HDD and i symlinked some others like the downloads off to the hdd aswell.
thanks for your help again, ive given you some more stars for your time!
Harry.

Data Execution Prevention problem on Windows with Safari

Hi. I'm running Safari 5.1.2 on Windows Vista Business. Whenever I try to print a web page (any page) Windows reports a Data Execution Prevention and closes Safari. I can always print the same web page from IE. How do I fix?

Are you really using 10.0.0? You've installed no updates to it??
From: poortip87 <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 6 Feb 2012 21:46:02 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: On closing Acrobat Windows detect an error "Data Execution Prevention has closed Adobe Acrobat".
On closing Acrobat Windows detect an error "Data Execution Prevention has closed Adobe Acrobat".
created by poortip87<http://forums.adobe.com/people/poortip87> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4190399#4190399

Problems moving an object with the selection tool

Im working on CS2 and since last week I have a problem moving objects with the selection tool: To move the object I am obligate to select the object first, and then click at the edge/stroke of the object to drag it. Before that I could move the objects just by selecting somewhere in the object and then just drag it to some other place in one step. I think I maybe changed something in the general preferences....

Ho thanks a lot Kurt!!!!! Indeed, that was the problem!!! Finally I can work normally again.... (the joker was me...but not on purpose)
Thanks again!

Problem Moving Images Between Folders In Bridge (Windows 7 Professional)

I have just bought a new computer with Windows 7 installed. I now also have Adobe CS5 Design Premium installed.
When I try to MOVE or DRAG and DROP an image from one folder to another using Adobe Bridge I get the following error message:
"The operation cannot be completed because you don't have sufficient permissions"
When I try the same thing in Windows Explorer it tells me that I need Administrator Permission. I click OK and it works in that programme.I am actually the Administrator
Can anybody tell me how I can configure Bridge to undertake this task please.
Many thanks in anticipation
Adrian

Dear friends
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.
Somebody said to me the other night that when you buy a car you buy it to enjoy the drive, not to have to tinker with the engine. Microsoft and companies that supply and install Windows 7 on new computers please take note!

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

CPU Overheating problem on Windows 8.1 Pro (installed with BootCamp)

There is a really important overheating problem on windows 8.1 (installed with bootcamp) even i do nothing Cpu is 50-60-70 Celcius degrees. This is really annoying problem. Most of users necessarily need windows OS for using third part programs that doesnt exist on OS X platform. I think this problem is important and has to be fixed as soon as possible.
My brand new Mac:
MacBook Pro (Retina, 15-inch, Mid 2014)
2,5 GHz Intel Core i7
16 GB 1600 MHz DDR3

I have the same problem on macbook pro retina 15 late 2013 - top configuration

I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

Those are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list. I have t

I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list. I have tried relaunching programs and nothing appears. Seemed to start happening a while back after one of my system upgrades.

After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.

I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank you

Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

Problem moving window with pointer

Similar Messages

Maybe you are looking for