Problem N5800 XM I need help

I have problem with my navigation, I have fw. 30.0.011 and update OVI maps 3 . Navigation need many time to locate my position via GPS . I test It with E66 and the are more quickly about 20 seconds but on 5800 are more than 5 minutes , but when I run Google maps on 5800 are locate in few seconds but I must by in off-line because I have only wifi Internet

reinstall itunes? (and quicktime, which an itunes installation usually takes care of.) that, i have heard, usually fixes most problems.

Similar Messages

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

Problems with exporting. Need help fast

So I recorded some video game footage (Battlefield 4) and when I look at the raw file, it says it's 1920x1080. I edited it and finished it and even if I look in info it says that it's 1920x1080.
But when I try to export the video it says that the source file is 1280x1080
So when I export it, it is in REALLY bad quality and I usually upload high quality videos! What do I do? I need help, fast! I have Adobe Premiere Pro CS6.
I have a i7 3770k CPU so I don't think that is an issue. 8GB of ram aswell.

Quickest way:
Get Started with Premiere Pro
New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.

Printing problem with Photoshop cs4, need help

I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2. I CAN print from other programs such as TextEdit or Pages. And my printer prints a test page without any problems. However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it. Does anybody know the reason for this?? Thank you for your help.

I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon.

Problem with removeallchildren. Need help.

Hi,
I have a Form container. The children are computed dynamically from the data that is refreshed for every 10 seconds. Depending upon the data I recieve, I will calucalate the number of children I need to draw. Each children will be added as a form item to the form container. The child ..i..e.. form item is a combo box. Every time I get new data I remove all the children which are present then compute new set of child data objects. I am removing the children by form.removeallchildren(). Suppose If I click on combox, it will show up all the values in the drop down, and keep it open with out selecting a value from the drop down up to say 10 sec's so that the data will get refreshed, the combo box will get deleted and the new set of child objects will be created which is expected. But the problem is, the combo box gets deleted by form.removeallchildren(), but the drop down still hangs over there with out combox which was kept open for 10 sec's.
Please share your thoughts on this.
Regards,
tc.

Hi,
Thanks for all your replies. Sorry for this late reply.
I found out the problem. The problem is with the combo box control. Whether we remove the entire form and reintiate it the problem will be still seen.
The combox has a private property known as destroydropdown where it does the clean up of drop down. The if control will check for wheher drop down exists and is still open. so there the condition fails hence drop down was not getting cleared.
I found a work around for this, the drop down automatically closes for any event generated. So I manually dispatched a click event on form, so it closes the drop down and then later call removeallchildren. By doing this the if control in destroydropdown in combobox control will get passed and does the clean up. Hope this maight be helpful. Thanks for your time.
Thanks,
tc.

Many Problems with Ipod! Need Help =[

Ey um there has been lots of issues with my Ipod!! (5th gen 30gigs)
Conditions:
-Ipod skips songs when playing(the songs arn't corrupted)
-Ipod freezes occasionally when viewing photos or playing music
-Ipod at times wont show on itunes 7
-When Ipod has connected to computer, and shown in Itunes, Itunes call my Ipod “Ipod” when it is supposed to be called “RnA”(and it won’t restore…Either my computer freezes or it would go on 4evr but not restore)
-When trying to turn on Ipod, a msg appears “Use Itunes to restore” When I plug and connect to Itunes, It says This Ipod needs to be reformatted for your pc. ( when I press update, my computer freezes, or would take forevr…and not update
-When I try to restore my Ipod my computer freezes or it would take forevr but not work
My questions:
-I bought my Ipod during the summer, and it was bought online from my dad, but he accidentally threw receipt away…Can I still replace my Ipod? Or find repairs?
-Where is the nearest Apple store in SanFrancisco?! I can’t find any!
-HOW DO I FIX MY IPOD?! T.T
What Happened:
Ok, last month, my Ipod was working perfectly until one day it froze… So I reset it. But after a few days when I connect my Ipod to my computer, it charges and everything is fine, but when I click disconnect Ipod on Itunes, or Disconnect when using Safely Remove Hardware…It works but then my Ipod still says Do not disconnect. But I disconnected it anyway and reset it. And it was working. And I have been having this problem a lot wen I updated to Itunes 7.
Then 2-3 weeks later, my Ipod started having many problems… It would skip songs even though my songs aren’t corrupted… And when I look at photos, It would freeze for around 20 seconds, and my Ipod turns laggy. So I reset it and it’s ok but then it happened again the next day. And these problems kept going on but I ignored it T.T
And now, I can’t use my Ipod at all! It says I need to use itunes to restore…So when I connect it to my computer, It would appear on Safely remove hardware, but Itunes would pop up and have no Ipod in it. So I tried disconnecting and reconnecting around 5 times. Then it worked! Except, Itunes call my Ipod “Ipod” wen it is supposed to be called RnA. And I try to restore it but it wont work! Please help me! ASAP! T.T and thanks!
Ipod with video (5th Gen) with 30 gigs Windows XP

Please don't shake it. It has a hard drive in it and by doing that you may damage the heads. That is the clack noise the heads hitting the platter. Not a good thing.
Go here to start a service request.
http://depot.info.apple.com/ipod/
They will send you a box pre-paid to send it back in with. If you need a copy of your receipt Amazon customer service should be able to help. I have never been asked for one but you never know. If you have the packing slip from amazon? This can be used as a proof of purchase.
Mort

Firewall problems-the PC people need help

my son, who has an imac and an isight and is running OS X took a job at a school in Mass. There appears to be a firewall and he cannot connect to me (we never had any problems before) The IT folks sent him a message to "research what ports might need to be opened on a sonic wall 3060 for it to work, what protocol the program uses, etc." This makes no sense to me, can anyone help I really want to be able to talk with and see my son. Thanks.

Hi
Here are ports they need to open.
TCP 5190, 5220, 5222, 5223 and 5298
UDP 5060, 5190, 5297, 5298, 5353, 5678, 16384-16403
Tony

Problems with setCharacterEnconding, I need Help

Collegues.
I have a problem with Internationalization, specially with the method setCharacterEnconding, because I need to put a new enconde for my request.
And my code compile sucesfully, but when I try to run in a request Client, appear in the Browser the next.
java.lang.NoSuchMethodError: javax.servlet.ServletRequest: method setCharacterEncoding(Ljava/lang/String;)V not found
And this is the source
req.setCharacterEncoding("pt");
String name=req.getCharacterEncoding();
Please the community can help me?.

DrClap.
Sorry, for the inconvenients. Thank's.
Maybe the problem is the container, but sorry. I don�t know how, I can change the servlet container.
Please could you explain me and check in my problem?.
Exactly the ISO8859-1 containt the languaje code pt, but is very extrange that not encode the output wih my source code. Also change the Locale to Portuguese. But is the same the request can�t encode in the getParameter. And for this reazon I try use setCharacterEncoding for give the request the correct encoder but appear the message error.
In this link could you check the codes
http://userpage.chemie.fu-berlin.de/diverse/doc/ISO_3166.html
Also exist a table more clear in the book Java Servlet Programming by Jason Hunter.
Regards

Condition Period Problem in Sales order - Need help

Hi Gurus
I am testing Sales Order back dated
Condition period Problem in Sales order
example for you to understand
Sales Order where PO date is 17.12.2007
Del Date & Price date is 13.02.2008
Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
Rajesh Chalke

Hi,
I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
Cheers,
KC

My Safari is suddenly opening strange tabs when I am trying to open something else. I have never had this problem before and I need help please, I don't know how to stop this happening

Hi there,
I have had my Macbook for 18 months and have never experienced this problem with strange windows suddenly opening in Safari. I know this happens on windows 8 computers a lot, and it has never happened on my Macbook before.
Please can someone tell me how to get rid of these. I have reset my Safari and rebooted my computer, and don't know what else to do. This is very frustrating, as I cannot just do what I need to do.
Thank you
Cheryl

I'm pretty sure you've got adware installed on your Mac. Please download and install adwaremedic: www.adwaremedic.com
This will remove most know adware plugins for you.

Problem with FocusTraversalPolicy.. need help asap!!!!

I have Panel with six text fields. I have another subpanel with another three text fields placed on this main panel. I want to create a FocusTraversalPloicy in a way .. that the focus goes to the first field in the subpanel from the third text field of the main panel. And from the last text field of the Subpanel the focus should go to the 4th text field of the Main Panel. Help needed asap.
TIA,
BT

Hi,
main panel
- text field 1
- text field 2
- text field 3
- text field 4
- text field 5
- text field 6
- sub panel ( text field 7, text field 8, text field 9 )
focus seguence:
text field 1 ->text field 2 ->text field 3 ->
text field 7 ->text field 8 ->text field 9 ->
text field 4 ->text field 5 ->text field 6 ...
//----------------- CODE ----------
import java.awt.*;
import javax.swing.*;
public class TraversalPolicyDemo1 extends JFrame
JPanel mainPanel = new JPanel();
JTextField txtField1 = new JTextField();
JTextField txtField2 = new JTextField();
JTextField txtField3 = new JTextField();
JTextField txtField4 = new JTextField();
JTextField txtField5 = new JTextField();
JTextField txtField6 = new JTextField();
JPanel subPanel = new JPanel();
JTextField txtField7 = new JTextField();
JTextField txtField8 = new JTextField();
JTextField txtField9 = new JTextField();
public TraversalPolicyDemo1()
this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
this.mainPanel.setFocusCycleRoot(true);
this.subPanel.setFocusable(false);
this.mainPanel.setFocusTraversalPolicy(new MyFocTrPol());
init();
private void init()
JPanel contentPane = (JPanel) this.getContentPane();
GridLayout gridLayout = new GridLayout();
gridLayout.setRows(7);
gridLayout.setColumns(1);
gridLayout.setHgap(10);
gridLayout.setVgap(10);
mainPanel.setLayout(gridLayout);
txtField1.setText("11111");
txtField2.setText("22222");
txtField3.setText("33333");
txtField4.setText("44444");
txtField5.setText("55555");
txtField6.setText("66666");
txtField7.setText("77777");
txtField8.setText("88888");
txtField9.setText("99999");
this.subPanel.add(txtField7);
this.subPanel.add(txtField8);
this.subPanel.add(txtField9);
mainPanel.add(txtField1, null);
mainPanel.add(txtField2, null);
mainPanel.add(txtField3, null);
mainPanel.add(txtField4, null);
mainPanel.add(txtField5, null);
mainPanel.add(txtField6, null);
mainPanel.add(subPanel, null);
contentPane.add(mainPanel, null);
public static void main(String[] args)
try
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
catch(Exception e)
e.printStackTrace();
TraversalPolicyDemo1 frame = new TraversalPolicyDemo1();
frame.pack();
frame.setVisible(true);
}// end class TraversalPolicyDemo1
import javax.swing.*;
import java.awt.*;
public class MyFocTrPol extends LayoutFocusTraversalPolicy
public Component getComponentAfter(Container focusCycleRoot, Component aComponent)
Component ret=null;
Component first = focusCycleRoot.getComponent(0);//txtField1
Component second = focusCycleRoot.getComponent(1);
Component third = focusCycleRoot.getComponent(2);
Component fourth = focusCycleRoot.getComponent(3);
Component fifth = focusCycleRoot.getComponent(4);
Component sixth = focusCycleRoot.getComponent(5);//txtField6
Container seventh = (Container)focusCycleRoot.getComponent(6);//sub panel
Component sub_first = seventh.getComponent(0);//txtField7
Component sub_second = seventh.getComponent(1);//txtField8
Component sub_third = seventh.getComponent(2);//txtField9
if (aComponent.equals(first))
ret = second;
else if (aComponent.equals(second))
ret = third;
else if (aComponent.equals(third))
ret = sub_first;
else if (aComponent.equals(fourth))
ret = fifth;
else if (aComponent.equals(fifth))
ret = sixth;
else if (aComponent.equals(sixth))
ret = first;
else if (aComponent.equals(sub_first))
ret = sub_second;
else if (aComponent.equals(sub_second))
ret = sub_third;
else if (aComponent.equals(sub_third))
ret = fourth;
return ret;
}// end getComponentAfter
public Component getComponentBefore(Container focusCycleRoot, Component aComponent)
Component ret=null;
Component first = focusCycleRoot.getComponent(0);//txtField1
Component second = focusCycleRoot.getComponent(1);
Component third = focusCycleRoot.getComponent(2);
Component fourth = focusCycleRoot.getComponent(3);
Component fifth = focusCycleRoot.getComponent(4);
Component sixth = focusCycleRoot.getComponent(5);//txtField6
Container seventh = (Container)focusCycleRoot.getComponent(6);//sub panel
Component sub_first = seventh.getComponent(0);//txtField7
Component sub_second = seventh.getComponent(1);//txtField8
Component sub_third = seventh.getComponent(2);//txtField9
if (aComponent.equals(first))
ret = sixth;
else if (aComponent.equals(second))
ret = first;
else if (aComponent.equals(third))
ret = second;
else if (aComponent.equals(fourth))
ret = sub_third;
else if (aComponent.equals(fifth))
ret = fourth;
else if (aComponent.equals(sixth))
ret = fifth;
else if (aComponent.equals(sub_first))
ret = third;
else if (aComponent.equals(sub_second))
ret = sub_first;
else if (aComponent.equals(sub_third))
ret = sub_second;
return ret;
}// end getComponentBefore
public Component getDefaultComponent(Container focusCycleRoot)
return focusCycleRoot.getComponent(0);//txtField1
public Component getFirstComponent(Container focusCycleRoot)
return focusCycleRoot.getComponent(0);//txtField1
public Component getLastComponent(Container focusCycleRoot)
return focusCycleRoot.getComponent(5);//txtField6
public Component getInitialComponent(Window window)
Component def = getDefaultComponent(window);
if (def == null && window.isFocusableWindow())
def = window;
return def;
}// end class MyFocTrPol

I have problem in my visa , need help please

I need ur help pls
When i put my number of visa its say
I havr to contact with support with itues
Can u help how to fix it ?

Then you need to contact iTunes support like it told you. Go to http://www.apple.com/emea/support/itunes/contact.html

IPod Problem... really need help. This is last resort.

I have a huge problem with my video iPod. I can connect it to the charger, no problem. But when it comes to connect it to my PC, it just will not read it at all. Usually it dignifies being connected by showing the "do not disconnect" symbol. But now it just will not read at all and shows no other symbols on the iPod. I have tried everything I can on both the PC and iPod but nothing works.
Please help, me being the idiot I am, I have important uni files on the iPod that I didnt make a back up-for.

I have a huge problem with my video iPod. I can connect it to the charger, no problem. But when it comes to connect it to my PC, it just will not read it at all. Usually it dignifies being connected by showing the "do not disconnect" symbol. But now it just will not read at all and shows no other symbols on the iPod. I have tried everything I can on both the PC and iPod but nothing works.
Please help, me being the idiot I am, I have important uni files on the iPod that I didnt make a back up-for.

Big probleme in my 5800 need help

every time i go in the internet sites like facebook or ovi and all other sites
they ask me to put the username and the password
i put them but i take :the username and password are incorrect
otherwise i use tha same username and password and enter the same site on my comuter i sign in succefully
please i need help

the only accurate part of the checker is phone number checker the post code is just a general check
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Alignment problems in website (Was:need help with website!!!!)

hi i made a website for my boss and everything looks great on google chrome but in IE parts are not alligned properly could some one go to the site in IE so you can see the problem for yourself and look at source code and find what i did wrong.
http://intuitivebodyhealing.com/testimonials.html
Thanks - Bunta

hi again i input your code into the website and external css sheet and it does not show what it does when the code is used alone just like you gave it to me, what have i done wrong now, sorry to be such a noob. here is a link the the temp page
http://intuitivebodyhealing.com/testimonialscopy.html
close but something is wrong. here is my css
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background-color: blue;
          width: 960px
          margin: auto;
          background-color: #0099FF;
#body{
          width:1050px;
          margin:auto;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
          padding-right: 15px;
          padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color:#414958;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #4E5869;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~ this container surrounds all other divs giving them their percentage-based width ~~ */
.container {
          width: 80%;
          max-width: 1260px;/* a max-width may be desirable to keep this layout from getting too wide on a large monitor. This keeps line length more readable. IE6 does not respect this declaration. */
          min-width: 780px;/* a min-width may be desirable to keep this layout from getting too narrow. This keeps line length more readable in the side columns. IE6 does not respect this declaration. */
          background-color: blue;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout. It is not needed if you set the .container's width to 100%. */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background-color: #6F7D94;
/* ~~ These are the columns for the layout. ~~
1) Padding is only placed on the top and/or bottom of the divs. The elements within these divs have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
2) No margin has been given to the columns since they are all floated. If you must add margin, avoid placing it on the side you're floating toward (for example: a right margin on a div set to float right). Many times, padding can be used instead. For divs where this rule must be broken, you should add a "display:inline" declaration to the div's rule to tame a bug where some versions of Internet Explorer double the margin.
3) Since classes can be used multiple times in a document (and an element can also have multiple classes applied), the columns have been assigned class names instead of IDs. For example, two sidebar divs could be stacked if necessary. These can very easily be changed to IDs if that's your preference, as long as you'll only be using them once per document.
4) If you prefer your nav on the right instead of the left, simply float these columns the opposite direction (all right instead of all left) and they'll render in reverse order. There's no need to move the divs around in the HTML source.
.sidebar1 {
          float:left;
          display:inline;
          width: 200px;
          height:1050px;
          background-image:url(images/sidebar1.png);
          padding: 10px 0;
          border-top: 4px solid black;
.content {
          padding: 10px 0;
          width: 650px;
          height:1050px;
          float:left;
          display:inline;
          border-top: 4px solid black;
          text-align:center;
          background-color: #09F;
          z-index:1;
.sidebar2 {
          float:left;
          display:inline;
          width: 200px;
          height:1050px;
          background-image:url(images/sidebar.png);
          padding: 10px 0;
          border-top: 4px solid black;
.kristest {
          background-image:url(images/lefthandkristentest.png);
          display:inline;
.imgA1 {
    position:absolute;
          top: 25px;
          left: 25px;
          z-index:-1;
.imgB1 {
    position:absolute;
          top: 75px;
          left: 80px;
          z-index: -3;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          margin-bottom: 15px; /* this creates the space between the navigation on the content below */
ul.nav li {
          display:block;
          margin-left:10px;
          margin-right:10px;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 10px 10px 5px 15px;
          display:block;
          text-align:center
          text-decoration: none;
          background-color: #E1C9A1
          color: #000;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background-color: #6F7D94;
          color: #FFF;
/* ~~The footer ~~ */
.footer {
          padding: 10px 0;
          background-color: #6F7D94;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~miscellaneous float/clear classes~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
.slider {
          width:1050px;
          height:325px;
          overflow:hidden;
          float:inherit;
          background-image:url(images/loading.gif)
.shadow{
          background-image:url(img/shadow.png);
          background-repeat:no-repeat;
          background-position:top;
          width:1125px;
          height:144px;
          margin:-60px auto;
.slider img{
          width:1050px;
          height:325px;
          display:none;
#underlinered{
          display:inline;
          text-decoration: underline;
    color:red;
#underlineblue{
          display:inline;
          text-decoration: underline;
    color:blue;
#underlineblack{
          display:inline;
          text-decoration: underline;
    color:black;
#underline{
    text-align:center;
          display:inline;
          text-decoration: underline;
#horizontalRule {
    min-height: 1px;
    clear:both; width:100%;
    border-bottom:2px solid black;
    height:1px; padding-top:10px;
    margin-top:10px;
    margin-bottom:10px;
#horizontalRule3 {
    min-height: 1px;
    clear:both;
    border-top:2px solid black;
    height:1px; padding-top:1px;
    margin-top:10px;
    margin-bottom:10px;
#horizontalRule1 {
    min-height: 1px;
    clear:both;
          width:100%;
    border-bottom:1px solid black;
    height:1px;
          padding-top:10px;
    margin-top:10px;
    margin-bottom:10px;
#horizontalRule2 {
    min-height: 1px;
    clear:both;
          width:100%;
    border-bottom:1px solid black;
    height:1px;
          display:block;
          margin-left:10px;
          margin-right:10px;
          size:180px;
#par {
          font-size:14px;
#par1 {
          font-size:13px;
.image1hold {
    width: 650px;
    height: 250px;
    background: url(images/left%20hand%20test.png) no-repeat;
    padding: 20px;
.image1hold img {
    display: block;
    margin: 10px;
    float: left;
.image1hold .content {
    width: 410px;
    margin-left: 150px;
.image1hold h4 {
    text-align: center;
    text-decoration: underline;
.image2hold {
          width:650px; /*this is the width of your first image*/
    height:250px; /*this is the height of your first image*/
          background: url(images/right%20hand%20test.png) no-repeat;
          padding: 20px;
.image2hold img {
    display: block;
    margin: 10px;
    float: right;
.image2hold .content {
    width: 610px;
.image2hold h4 {
    text-align: center;
    text-decoration: underline;
-->
</style>

Problem N5800 XM I need help

Similar Messages

Maybe you are looking for