Problem network - not see Mac from PC,

At home I have a iMac 21.5 and a few PCs that work perfectly in a network. Initially I was using MacOS Snow Leopard and everything worked fine. All PC and Mac, he saw them, the printers are tied to one PC and is triggered to print from any computer on the network. After nadgradih Mac with Mac OS Lion, all RS iMas seen but they do not see it and can not put printers iMas gives me as error you have a picture window and if there where I can send them to see what appears as a message. In the settings I needed option enabled SMB, which is necessary to iMas can be seen from a PC.
nobody help me about this problem!!!

System Prefs --> Sharing --> File Sharing --> Options --> Share Files and Folders with SMB
Then choose which user you want to allow access.

Similar Messages

  • HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner

    HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner.
    I installed drivers and software from the HP website. Printer works fine but scaner does not work over WiFi. I did not try over USB because printer and computer are not in same room.

    Hi @mamedina ,
    I see that you are not able to scan over the wireless network. I would like to help you resolve this issue.
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Deskjet 4645)
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    I have provided a document to make sure the Scan to Computer is enabled. You will have to select 10.8, then Network Connection. A 'No Computer Detected' or 'Connection Error' Message Displays When Scanning for HP Officejet 4610 ...
    If you are still not able to scan, then I would connect the printer to the computer by a USB cable to see if it is a network issue or  the scan port might be blocked on the router. Unfortunately the printer isn't accessible in the same room, but this will rule out a software issue or a network issue. You can contact the router company to check and open these ports 9220/9500/427 on the router for scanning.
    Please let me know the outcome.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Need to be able to setup printing for my Ipad2. How do I find the instructions. THe printer is installed and capable, but I do not see it from either my iPad2 OR iphone 4.  Please advise.

    need to be able to setup printing for my Ipad2. How do I find the instructions. THe printer is installed and capable, but I do not see it from either my iPad2 OR iphone 4.  Please advise.

    1. Make sure you've updated the printer firmware and successfully printed the test sheet from the printer.
    2. Make sure that your iPad is on the same network as your printer.
    3. Try printing from an app. To print this page from Safari, for example, go to the rectangle with the right- facing arrow on the toolbar, choose Print from the drop down menu, select your printer, and click Print.
    Printing in apps is usually under the rectangle-arrow symbol, but is also sometimes found under the wrench- "tools" symbol.

  • Why I can not see messages from Messenger on lock screen?

    I can not see messeges from Messenger on the lock screen, when my mobile data is on, also there is no sound, even I make ringer and volume louder. In Notification Centre>"Messenger" I setted it  to show on lock sreen, but I can not see messages anyway... What I need to do, can You please help me?

    hello,
    yes you are correct in all the above points...
    as the third one is referring to data element directly the refer check box is not coming...
    to maintain your own text for the other two..you have to uncheck that.... 
    you can also use Go->Translation to maintain text in other languages instead of SE63...
    Thanks.
    K.

  • Help! Windows XP not seeing macs on wireless network

    Hi folks,
    I have just bought airport extreme, and have installed all the latest updates on my powerbook, and macpro. I'm trying to add a pc laptop running windows xp 2002 service pack 2 to my local network.
    The pc connects to my network, and IS accessible from both my macs, but I can't access my macs from the pc, and I can't print from the usb printer attached to the airport. The current drivers for the printer have been installed on the pc.
    I'm not as familiar with pcs as I am with mac, and I've explored as much as I can.
    Can anyone help?
    Thanks
    Brian

    Thanks I figured it out.

  • PC does not see Mac on network

    I can see my PC shared folders on the Mac but the PC does not see my shared folders on the Mac, in fact it does not see the Mac at all.
    Does anyone have any idea what I am doing wrong?

    System Prefs --> Sharing --> File Sharing --> Options --> Share Files and Folders with SMB
    Then choose which user you want to allow access.

  • Windows xp not seeing mac mini during migration

    Hi all,
    I just set up a new mac mini for my in-laws, fast-forwarding them through 15 years of technology. However, the migration from Win XP is not as seamless as Apple promises. After all the installation, the mini saw the PC, but the Migration Assistant on the PC does not see the mini. What is there to do?
    Some details:
    --- I verified on my router that both computers are on my LAN.
    --- If it matters, the Win XP and thus the Migration Assistant is in Hungarian, as is the Lion installation. Everything is up-to-date.
    --- I tried a reboot on both machines.
    --- I shut down on all firewalls for the migration.
    --- There is no apparent security lockdown on my router that would cause the trouble. Apart from uPNP being turned off. Is that a problem? The mac saw the PC twice...
    --- Actually, after the reboot, the mini did not see the PC anymore, and before the reboot, it could see two instances of the PC, but picking either did not help as the PC was still only "looking for the mac", with an endless progress bar.
    I am happy to try any networking or Windows setup, I'm just out of ideas.
    Thanks!
    Laszlo

    Thanks I figured it out.

  • RFC problem: could not get functionname from XML requst (sic)

    I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system.  It's a very small simple interface, and it's all working until it tries to call the RFC.  The error is
    Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
    I've created an RFC channel, which is green in the adapter monitoring.  The RFC imports without a problem, and appears in my interface mapping.  My mapping program converts to the RFC message type (as evidenced in sxmb_moni.  I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called. 
    Could anyone point me to what else I could check?  I saw a post about the same error message, where the respondent found something in the logs which helped them  Could you expand on what you found, and in which log please?  Any pointers as to which logging options I could switch on and check would be gratefully received.
    Regards
    Alan Graham

    Thanks for the responses.
    I set up a communications channel of type RFC, which is
    showing green in the adapter monitor.  If I deliberately
    break it, eg by changing the password, the adapter shows
    as red in the monitor.  I assume therefore that the
    adaptor settings are correct.
    The XML going to the adapter looks correct AFAIK.  My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient.  In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
    <SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
    Also, the interface determination SOAP header, in the MAIN section includes
    [code]<SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>D04</SAP:Service>
      <SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
      </SAP:Receiver>
    These are the correct values for the RFC name and the namespace, AFAIK.
    I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC.  The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
    Alan

  • Problem  "Can not install Mac OS X on this computer"

    Trying to upgrade from 10.2.8 to 10.4 (with a CDROM not DVD) on a G4.
    Plenty of memory, hard drive, and processor speed.
    Will not complete "Computer Check"
    Keep getting error "Can not install Mac OS X on this computer"
    Mac on line support FAQ said this
    *+Computer check+*
    *+The Mac OS X Installer makes sure your computer can use the version of Mac OS X you're trying to install.+*
    *+Troubleshooting tip: If you see a message that you cannot install Mac OS X on this computer, even though it should work with Mac OS X, you may need to install a firmware update. Restart your computer from the hard drive and install the latest firmware available for your computer.+*
    Well I tried all of this, firmware update said I already had the most up to date firmware installed. So I am stuck and need a little advice...
    PLEASE HELP!!!

    Welcome To  Discussions skatam1!
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    You should contact the vendor, and request a refund, or an exchange for a Full Retail Version, of the Tiger Install DVD.
    If that is not an option, advise if you would like purchasing information.
    Be sure not to, again accept grey, upgrade or machine specific CDs or DVDs.
    The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
    If your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
    Info here Installing Tiger Without A DVD Drive.
    And here Installing Tiger Using Firewire Target Disk Mode.
    The Tiger Media Exchange Program, referred to in those articles, is no longer available.
    ali b

  • My CD reader do not see mac applications, but only windows applications.

    On the adobe CS CD is a windows application aswel a Mac application.
    There is no automatic startup on my mac.
    And I do not see any file for a setup (.dmg) or other file to install Adobe CS.
    It looks my drive only sees the Windows files.
    Who can help me to solve this problem?

    Welcome to the Apple Support Communities
    Do you see a pkg file in the disc? Open the pkg if you don't see the dmg package

  • Flashplayer don't work for ubuntu 12.04lts. I try everythink until now. so, I can not see videoclips from net! any solution, please?

    I install adobe, flashplayer include, using ubuntu software center. I can not see any video online.

    1. Easiest way:
    Open a terminal. Enter
    sudo apt-get install flashplugin-installer
    restart firefox.
    OR
    2. install libflashplayer.so manually from canonical,
    wget "archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.2.202.332.orig.tar.gz"
    tar xvzf adobe-flashplugin_11.2.202.332.orig.tar.gz
    sudo mv libflashplayer.so /usr/lib/mozilla/plugins
    restart firefox
    OR
    3. install libflashplayer.so manually from adobe,
    go to
    http://get.adobe.com/flashplayer/
    select the tar.gz version instead of apt
    tar xvzf install*.tar.gz
    sudo mv libflashplayer.so /usr/lib/mozilla/plugins
    restart firefox

  • Can hear but not see movies from my Casio Exilim 7.2

    Movies shot on my Casio Exilim 7.2 mega pixel camera open up in QuickTime, but I can only hear them, not see them. The files from the camera are .AVI files if that helps. Wondering if I am missing something. I went to the 3rd party software page, but either didn't see what I needed or didn't understand what I needed to download to make it work. I thought it was supposed to "just work." I'm using a brand new Macbook Pro core 2, 10.4.8
    Thanks for any help.

    The inventors and creators of the AVI "container" (Micro$oft) abandoned the file format many years ago. They have moved on to WMP formats and no longer support AVI. They must know something!
    You may be better served by exporting them to QuickTime file formats using QuickTime Pro or other third party conversion software.
    Personally I wish AVI would just die (as intended by the owners) and disappear as a file container.

  • IMovie "does not see" videos from my Canon Vixia HF M32 and shuts down. Any ideas?

    Lately, I have not been able to download videos as I used to from my Canon Vixia HF M32. My iMovie would not see the camera and would often close unexpectedly. It then gives an incomprehensible error message. I have no idea why this is happening or what to do. I was able to dowload some videos using a pc and a different software. Any clue?
    Thanks

    iMovie HD (version 5 and 6) works only with Firewire cameras, DV or HDV.
    Footage from other types of cameras can be converted for use. Try VoltaicHD and convert to Apple Intermediate Codec (1080i or 720p) for HD footage or DV for SD (Standard Definition) footage.
    If all you want to do is creating a DVD, go for SD footage in the DV format. A DVD is always SD.

  • Problem of not seeing the misscall

    Hi,
    After the update 7.0.2 still cannot see the misscalls
    This is happen if you are at the mmeting and once the iphone rigns and you sent the caller to busy tone you can not see the caller at the lock screen.
    And some how if you youch any of the buttons the miscalls again lost and can only review at the call list
    Thank you for your help
    Regards
    Umut

    Hi,
    if you cancel a call using the power on/off button it will not be reflected in the notification centre or the locked screen, you will have to see it in the recents in the call log
    instead when you recieve a call, instead of rejecting using the top button, if you click on the remind me later and choose 1 hour or other options, then it will be in the notification centre or the locked screen.
    this is  the current design of ios 7

  • Network, not seeing some components such as printer, Apple TV, etc...

    I could really use some help from all the experts on this forum. I'm lost on what to do. Posted on Linksys also, just in case.
    I am using a Linksys BEFSR41 router, I also have two Airport Extremes for wireless service and have two Mac's (wired to the linksys router) that can see each other fine.
    The problem is I can't see my network printer, xbox 360, apple TV and other items that are hooked up to the wired networked, I have to use the wireless option to see these other items. Any suggests why my Mac's can't see other items on the wired network. The other items like xbox etc, work just fine on the network they just can't see each other.
    Many Thanks,

    Hi Big Loue,
    If you are talking about open Network under System Preferences, I don't think you can see anything other than your wireless options, i.e., ethernet, Airport, Blue Tooth, etc.
    I know that Apple TV shows up in iTunes. I have a printer hooked up via Airport but I think it only shows up as a printing preference when you print something.
    If I am wrong I am sure that someone will chime in and tell you.

Maybe you are looking for