Problem :" No changes allowed to SAP system objects" ,pls...

Hi guys, I recently installed the minisap system  successfully but after I log on to the system every time I want to create a new program ( SE80 ), change and edit old program then the systems responds " No changes allowed to SAP system objects".
Have anyone had the same problem.
I would be very grateful if any one could help me.Pls..
Note:Mini SAP i get from Books ( ABAP Objects: Introduction to Programming SAP Applications
by Horst Keller, Sascha Kruger )
Regards
Indra Budiman
[email protected]

Hi Indra,
On the face of it, it seems you're trying to change the standard SAP objects (programs). Could you specify which program you're trying to change / add ?
Remember, all your new programs should begin with either a 'Z' or 'Y'.
Regards,
Anand Mandalika.

Similar Messages

  • Replicate changes from one SAP System to another

    I have a requirement in which I have done some changes in one SAP System and it is not getting reflected to the other one. Please note that the SAP System which I am refering to is the one we get from SM51 Transaction code. Please note that the SAP System ID and the client is the same.
    Thanks
    Arghadip

    Yes I am able to view all the systems but how can I replicate the changes from 1 to another. We had done the changes in system A but it is not getting reflected in system B. Is there any ways to replicate it.
    No Experts to answer this question?????
    Thanks
    Arghadip

  • Problem accessing clicksoft webservice in SAP System

    Hi All,
    We are currently integrating SAP system with Clicksoft. For that, we have received WSDL file from Clicksoft and we are trying to create consumer proxy in SAP system.
    But, getting error " Attribute "Transport" in <SOAPbind:binding> has incorrect value.
    Regards,
    Sagarika

    Hi ,
    As this forum is for SharePoint and this question is about third party, I changed its type to discussion.
    Thanks,
    Wendy Li
    TechNet Community Support

  • Problem transferring file to non-sap system from R/3

    Hi,
    I used one Z function module to transfer file to non-SAP system as follows.
    CALL FUNCTION 'Z_INTERFACE_OUT_1'
           EXPORTING
                INTID           = V_INTID
                EXTRACT_DATASET = P_V_FILENAME.
      IF SY-SUBRC = 0.
        WRITE: / P_V_FILENAME, 'file has transferred successfully'.
      ELSE.
        WRITE: / P_V_FILENAME, 'file transfer has failed.'.
      ENDIF.
    I am getting message 'file has transferred successfully'. But it is not found on destination system.Can anyone please tell me the reason.
    Thanks,
    Venkatesh.

    Hi,
    You can use transaction code SNOTE to see whether a particuler OSS note is implemented or not.
    First navigate to GOTO> Download SAP Note and import the OSS note to your system.
    Then navigate to GOTO > SAP Note Browser and check the status of the OSS note, it will show whether it is implemented in your system or not.
    Also in the OSS note, there is release specific information. You can check whether that OSS note is applicable to your release or not.
    Regards,
    Gaurav

  • Problem in sending email in SAP system

    Hi Gurus - I'm trying to trigger email from the output type in ECC 6.0. Output has been successfully processed(Green), but the recipient is unable to receive email.
    In Transaction code, SOST, the status of the message is showing as sent and in Transaction SCOT, the status of the messages is showing as "In transit". Can you please assist us to find the solution to the problem.
    Thanks,
    Sree

    Dear  Sreedhar,
    Are you facing this problem while sending to all mail Ids ?
    Please try to send common Ids like yahoo, gmail etc...Is there any attachment in your mails ?
    Probably these problem is because of  the Firewalls are blocking the mails .
    In SOST it is green means from SAP has sent the mail and Exchange server has to do the rest .
    Troubleshoot in that area by asking the Exchange Admin .
    Regards,
    Nibu

  • Problem after deinstallation of JDK during SAP System running....

    Hello...
               I am working as a SAP BASIS trainee.I am facing some problem related with java and SAP System.
    Actually an SAP System was already  running on the my system and suddenly i required to work on eclips (an IDE for java). And to install eclips it required JDK 1.6 version.But as we know that for SAP System an JDK 1.4 version required only.
                   I forgot and deinstalled JDK 1.4 and Installed JDK 1.6. and again tryied to installed eclips bt it was still throwing an error that it required JDK 1.6 and currently JDK 1.4 is running.
      On the other hand SAP System was getting problem during SAP START (  dialog queue waiting time elapsed .......). and finally not working.
       I deinstalled JDK 1.6.  now SAP System is working fine. It is getting started and everything is right.
    Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
    Thanks in advance.
    Uttam Kumar.

    > Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
    You need to make sure that the SAP system uses the correct JDK. You can install two JDKs in parallel (don't upgrade but install the 1.6 JDK in a separate directory).
    Anyway, NWDI should not be installed on the server but on a local workstation.
    Markus

  • Info. / Doc. on Changes to Standard SAP Program, Tables, Fields in SAP 6.0

    We are in the process of upgrading our SAP from 4.6c to 6.0 and I am looking for a document or white paper that summarizes changes to Standard SAP Programs, Tables/Fields, Function Modules etc.. from what used to be in SAP 4.6c to what it is in SAP 6.0.  I am not sure if such a comprehensive document exists or is posted in the forum.
    Any help or information in this regard will be highly appreciated.
    Thanks
    ram

    Hi Ram,
    <<   We are in the process of doing our technical upgrade from SAP 4.6c to 6.0. I am looking for a white paper or documentation listing the changes made to the standard SAP Programs, Tables, Fields, Function Modules etc. from Rel. 4.6c to 6.0. >>
    Do you want to know what custom changes were done to SAP standard objects in your system or do you want to know what changes SAP did from 4.6c to ECC6.0.
    There is no white paper or documentation to find out custom changes made to SAP standard objects. but there were many tools in the market to find out and tell what changes were done to sap standard objects in your system.
    Your question seems ambiguous please clear it.
    Thanks,
    Kiran.

  • Couldn't log into SAP System (message 00264) after SAP_BASIS update

    Hello,
    we performed SAP_BASIS update to SAPKB70023 and get a problem with logon into a SAP system with message 00264 (Status &2 of the user interface &1 missing).
    We have a 64-bit non-Unicode system on Solaris/SPARC/Oracle and Kernel level 333.
    We tried to import MENUSYST program from note 1285869, but nothing happened at all. The parameter abap/unicode_check we set to "on" but this didn't help us.
    So after selecting system record in SAP Logon now we get the initial logon screen with no "new password" button and error 00264 (Status 0020 of the user interface SAPMSYST missing.) and couldn't log into the system.
    We have no idea why correct and existing statuses are not working.
    Please suggest us what to do to fix this problem.
    Thanks in advance!

    Check this,
    http://forums.sdn.sap.com/thread.jspa?threadID=835278
    it may be useful.
    Regards,
    Ravi

  • J2EE Engine JC00 of SAP System did not come up after 200 seconds waiting fo

    Hi,
    In the process of installing SAP WEBAS for java, during the last phase of installaion I am getting this problem
    J2EE Engine JC00 of SAP System EPD did not come after 200 seconds waiting for another 20 seconds.
    my platform is
    AIX 5.3
    jsdk jsdk1.4.2 64 bit
    Can any one help me out as I am stuck and getting no help from anywhere
    pradeep

    Hi Pradeep,
    Check your trace files in the /usr/sap/<SID>/DVE.../work directory (dev_bootstrap, dev_disp, log_bootstrap etc..) for any errors preventing J2EE from starting.
    It can be related to incorrect java path in the instance profile, incorrect JDK (see the OSS note # 716927).
    You can restart J2EE engine via SMICM once you clarify the issue.
    Regards,
    Mike

  • System setting does not allow changes to be made to object LSYS

    Hi
    Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
    Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
    System setting does not allow changes to be made to object LSYS
    Why it is saying like that . But i can able to include the other process types in the process chain .
    regards
    mohammed

    Dear Mohammed,
    Since you are trying to create process chain in production system.
    Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
    Check the settings in SE06. system would be non-modifiable for sure.
    in SCC4,  settings ->"changes to the cross customizing objects would be not allowed"
    These two settings/configurations would not allow any development or changes or edit or create in production.
    Please check with your basis folks and proceed further.
    Hope this would help you more in understanding

  • System settings does not allow changes to be made to object

    Hi,
              In one of my test system, when i tried to change the object  its displaying following error message.
    System settings does not allow changes to made to the object.
    I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
      I would like to know, how to change the object in the namespace.
    Regards
    Srikanth

    Hi,
    In SE06, in addtion to system status and component status, check the namespace status too.
    It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
    To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
    Regards,
    Srikishan

  • System setting does not allow changes to be made to object

    Hi experts,
      I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
    "System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

    Hi,
    If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
    Or you  can find the text in the note:
    «/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
    Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
    Regards,
    André Nunes

  • Problem in moving object from one SAP system to another....

    Hi,
    I have created a transport request in System A client 800.
    I am trying to move the Transport request to System B client 900.
    (Note: A and B are different SAP systems)
    I first release the object going in system A client 800 using transaction se09.
    Now I go to System B client 900 and then to transaction STMS. After this I click on display import queue for System A inside transaction STMS in System B. Then I go to EXTRAS ->Other Requests Add. The import queue name is defaulted by System A and then I add the Transport Request number. Then the system asks me to login in Sytem A client 800. I login successfully. But I get an error message:
    "Transport control program tp ended with error code 0247
    Errors: addtobuffer has problems with data- and/or cofile"
    Can someone tell me how to solve this error ? What is the issue ?
    Regards,
    Rajesh.

    Hi Rajesh,
    Check this link:
    tp ended with error code 0247
    http://www-1.ibm.com/support/docview.wss?rs=2366&context=SSZ8F3&dc=DB520&uid=swg21243429&loc=en_US&cs=UTF-8&lang=en&rss=ct2366tivoli
    Solar_migration to different sid
    http://www.sapfans.com/forums/viewtopic.php?p=790715&sid=3528f52126b6764d5cb28acb67f752fe
    http://www.sapfans.com/forums/viewtopic.php?t=221340&view=next&sid=0e5e06508287d3f738bc97ce7aea8426
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/transport-request-to-import-queue-with-error-740676
    Hope any of this link helps you out.
    Regards,
    Vivek

  • Synchronizaton of changes in SAP systems

    Hi!
    I have the following problem.
    I have two that are different, it means some tables are changed.
    Is there some transations and/or tool, that allows to track all the changes made in both systems comparing customer tables, reports, perhaps repository.
    I have heared about Tcode SPRO_ADMIN.
    Has some information about this issue?
    Thank you very much!
    regards

    Hi Axel,
    a) CCSV doesn't compare reports
    b) for Z or Y objects, you can go to the manual selection and enter the names of the Z / Y tables you want to compare
    c) yes, you can compare across clients, just make an rfc connection from one client to another
    d) these are the types of objects that can be selected
    C     View cluster
    L     Logical transport object
    S     Table (with text table)
    T     Individual transaction object
    V     View
         Table
    In addition to these, you can compare
    1. Customizing piece list/transport
    2. Business COnfiguration Set
    3. ALE Distribution Group
    <i>And what exatcly can I compare?
    E.g. If I change one table in one system and have exactly the same table unchanged in other system. Can I check it out with this tool?</i>
    If there are structural differences between the two systems, then it will inform you about this difference and choose the identical fields and compare them. Also, you can define which fields you want to be compared

  • SAP System is not the original system of the object being edited

    Hi All,
    We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
    How we can resolve this situation.

    Hello Guys,
    Thks for your input.
    @Vinod,
    We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its  a replica of old dev to nev dev with SID change.
    @Arjun,
    I already check TADIR table and and its pointing to new SID.
    @Ashok,
    As i said earlier,post intallation is already completed.
    Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
    Thx,Nilesh

Maybe you are looking for