Problem not related to Norton

I don't run Norton, and had no problems with iTunes 5. Since downloading iTunes 6 3 days ago, I've had problems with podcasting and now cannot access the music store at all. All the posts say turn off Norton, but I don't run Norton, and Symantec is disabled. I've tried everything that every other post mentions--no joy. Can someone tell me if iTunes 5 is available anywhere on the web? I can only find 4.9 and am worried that too much of my music downloaded in September will be unreadable without iTunes 5.
OK, someone sent me the link for iTunes 5. I just uninstalled 6, installed 5, and am having the same problem--even though iTunes 5 worked perfectly for me all through October.
What gives?

PapaVT-
I doubt your HP laptop is causing the problem. The only way I can imagine it could cause such a problem, is if it was overloading the WiFi with a data transmission or reception. However, the way it works is that data is sent in packets, which lets packets from other devices share the network. It could slow down the network, but would not stop it. If your iPad can access the Internet when the printing problem arises, then your laptop is not causing the problem.
It is possible your WiFi router needs a change to its setup or a firmware update installed. Contact the router's manufacturer to see if they can advise you on how to use AirPrint with their router.
One far-fetched possibility is that your iPad's WiFi is jumping to a neighbor's WiFi that happens to have the same name. That happened to me a few weeks ago. I found out about it when I had trouble printing. It seems that there are a LOT of WiFi base stations out there named Linksys!
Fred

Similar Messages

Time shift problem NOT RELATED TO WINTER TIME

I have a problem since yesterday : when I let my iPhone set the hour automatically, it goes one hour late!
It IS NOT the "winter time" problem. When I set manually the time, it is OK. As soon as I reset the automatic hour set (in the general settings), it goes one our late immediately and that stays even if I synchronise with iTune on a computer set to the correct time.

Hi jsonxp,
What is language of your PC Operating system you are using? Nokia Photos language installed on your PC etc?

How can I download FF 6? FF 7.0.1.4288 (the version I am using) is not compatible with Norton 360. I need to return to FF 6.

FF 7.0.1.4288 intermittently uses 97-100% of CPU capacity for a few seconds, alternating with a few seconds of normal idle usage; this can continue for long periods. During these periods the computer responds very slowly. I can terminate it (temporarily) by rebooting.
FF 7 occasionally uses 97-100% of capacity continuously for several minutes; my impression is that it would continue indefinitely if I did not reboot. When I try to reboot in this condition, FF does not respond, I have to click End Now, in which case previous sessions are not saved.
Norton believes this is due to an interaction between FF 7 and Norton 360. They say that 7.0.1.4288 is a beta version. Norton tells me that 360 should become compatible with FF 7 in a month or two. In the mean time I need to reinstall FF 6.
I cannot see how to do this on your website.
Please help.

Firefox 7.0.1 is an update to Firefox 7.0 and there was no beta of Firefox 7.0.1.
You may need to update Norton. A patch for their toolbar to make it compatible with Firefox 7 was released on the same day that Firefox 7 was released. You may need to run Norton's "Live Update" several times to get all that is needed.
*See --> http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-7-0-Compatibility-Patch-is-now-available/td-p/547384
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Does not relate to your question, but...
You have multiple old Java Console extensions that Java did not clean-up during updates. You need Java Console only if you do Java programming/development or debug Java applets on web pages. You can see them in Add-ons > Extensions, '''''but you can not remove them from there'''''. Removing them will not affect the functioning of Java on websites. You can '''''manually''''' remove them, '''''if you do not do Java development work''''' to avoid future, possible problems/conflicts:
*http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
Your old Java Console extensions:
*Java Console 6.0.22 {CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
*Java Console 6.0.23 {CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
*Java Console 6.0.24 {CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
*Java Console 6.0.26 {CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}

How to fix a looping desktop NOT related to Stuffit?

This very similar to another thread but I feel it's NOT related to it.
At first I thought it was related until I got further into the solution. I did download the 2008-08 security update as well as QT 7.6. That's when I think the problem started. The difference being that after xx iterations, the desk top would appear and work OK. If the computer sat idle for 3 - 4 hours (not likely due to our work load) it would loop again once I woke it up. It always happens sitting overnight. The problem is now approaching 2 weeks of acting this way. I didn't have any of the other symptoms like folder closing, applications quitting, etc.
I thought after looking for this AVR file I realized that I don't have Stuffit anywhere in my system. So that fix would not do me any good. I surmised that it might be a start up item in system preferences under users so I started bypassing them one at a time until I only had one left. That one was bypassed last night and made the loop count the highest ever at 84. Today, I noticed after removing (un-checking) all the start up items, one kept being executed (the opening a of a .dmg file).
It's tough to test if the fixes cure the problem because I have to wait 3 - 4 hours before it will fail. Usually I just wait overnight because our G-5 is in constant us with two of using it to get actual work accomplished.
This morning I thought it would never start but after 84 loops it broke out. Before it finally breaks out, the next to last loop stays up for 30 seconds giving you the false hope that it is over then it goes one more time and it's up and running. And another interesting thing is that if I can't wait for it to finish looping, I do a reboot and all is well and it starts up normally.
I have run Tech Tools Pro on all drives and they are all OK. Ran diagnostics on all components of the system hardware and all were OK. I even ran disk repair and permissions on all drives and all OK.
Any other suggestions, observations or sources I can go to would be very helpful. My Apple care ran out a year ago so I can't go there.
Thanks for responding,
Al

Thanks for the rapid response!  This morning it took 89 loops to wake up.  The number is growing.
*+Also look in these if they exist, some are invisible...+*
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
I did the above from your previous post and found nothing.  BTW how do you look for an invisible file?
Back under system 9 when the computer was doing things like this, we just rebuilt the desk top and it went away.  Now I'm not as up to speed on os x so do we need to rebuild the desktop from time to time and if so how does one go about doing this?
This morning, all of the startup items that I hid in systems preference/accounts appeared to work correctly as the .dmg did not open and did not appear on the desk top.
Another anomaly happening is from time to time I lose an icon (shows icon as a ?) in the tool bar but the application still works and restores the icon when you click on it.
I think I might have accomplished the same thing as safe boot by bringing up Tech Tools Pro from their emergency drive. After I did that I ran disk utility repair disk and repair permissions on all of my hard drives and it didn't find anything. All hard drives have been optimized last week.
My frustration is that it takes 3 - 4 hours for it to do the looping. Tonight, I will do the safe boot and see what happens in the morning. When operating under safe boot will I see my regular desk top with folders and files?
Now moving on. Is it possible and if so, how would I back out the recent security update and the QT update to see if that corrects the looping. Would going to os 10.5.6 fix this problem? I would like to stay with my current operating system. I realize that Apple has its' resources working on upgrading the 10.5 system and maybe things will get worse for us that are on os 10.4.x and wish to stay there.
I appreciate your support and that of others on this forum for without you, there would be no place to turn as Apple seems to be unreachable unless you have Apple Care.
Have a great day on this Super Bowl Sunday!
Al

I use norton anti virus and it has login help for most sites i could use it effectively with firefox earlier version but with firefox 4 the same is not available sttaing firefox is not compatiable with norton anti virus kindly clarify

firefox 4 is not compatible with norton antivirus program. i need a solution for this
mohan

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
The core Norton components such as antivirus and firewall will still work, it will just be the add-ons that are not currently compatible.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

I get a a message "javascript: void (0)" when I turn on online radio. This problem is related also with other browsers. I reinstalled java but nothing changed

This problem is related also with chrome, opera and explorer. I reinstalled java but nothing changed

To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java
Note the javascript: void(0); is often use as a placeholder URL to indicate that an onclick event is tied to the link to do the actual action. 
If JavaScript is blocked for some reason then this javascript: void(0); links comes into view.
Make sure that you do not block JavaScript.
*http://kb.mozillazine.org/JavaScript
Also make sure that your security software isn't blocking JavaScript if it happens in other browsers as well.
You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Selecting from two tables and confirming from them despites they not relate

Please I need a query to select from two tables that are not related to each other.
I also want to confirm data's as in verify wether what the user has entered is in accordance with what is in the tables
Examples
the first table is named "Card" and the second table is named "Student_Details"
Card table contains a column named "Pin_Number".
The Student_Details table contains fields such as Exam_Number, Name, Age, Sex.
The user has to Enter the Pin_Number which has to be confirmed in the Card table and Exam_Number which has to be confirmed in the Student_Details table and verify that both data's are correct.
Please I need the SQL and PL/SQL queries for this problem.
Thanks

Hi,
I think you need two different queries
You can write a procedure like:
create or replace procedure p1 (p_pin_number number, p_exam_number)
is
r_card_row            card%rowtype;
r_student_details     student_details%rowtype;
cursor c1 is
select *
    from card
   where pin_number = p_pin_number;
cursor c2 is
select *
    from student_details
   where exam_number = p_exam_number;
begin
open c1;
    loop
      fetch c1 into r_card_row;
      exit when c1%notfound;
      .... do whatever you want..... and the samething you can do with other cursor
    end loop;
close c1;
end p1;Hope this helps
Ghulam

N95 autofocus problem software related

I've had an N95 for more than a year. Part of the reason I bought it was the 8 GB - could take lots of pictures and video. I'm very disappointed. For reference, I am an eye doctor. I know a lot about prescribing glasses, I know optics, and I have done quite a lot of photography.
As with most cameras, the N95 "take picture" key may be partly depressed to get the focus, then fully depressed to actually take the picture. (Auto mode.) It then takes sharp pictures, if lighting conditions are right, and the phone is held steadily.
It can focus on everything from 20 cm or so to infinity. (Try partly depressing the button, you'll see the picture go in and out of focus, then fix on the sharpest setting.) (With some of the other modes, EG landscape, the focus is "fixed," IE, the camera does not try to autofocus, and you can take pictures a lot quicker.)
So - the fact is established - the N95 hardware is capable of mechanical focussing, and some of its software can also detect which focus setting is the best. So it is not "handicapped" from birth. It should be possible to do something sensible with it. However, it behaves as a gifted child with an attitude problem. "No, mommy, I don't WANT to do homework!" (It's not that the homework is too hard.)
However, there are three big problems:
1) In "landscape" mode, the focus is not on infinity, it is closer. Thus, pictures of faraway objects taken in this mode are not sharp.
2) The most vexing. When in video mode THE FOCAL LENGTH IS FIXED - and cannot be adjusted. Mine is sharp at 30-50 cm, but out of focus at distance. It SHOULD BE SHARP AT INFINITY! Who's interested in filming stuff at 30 cm distance? I cannot express with a keyboard alone how annoyed I've been. Sometimes I've put my eyeglasses (I'm nearsighted) over the lens, and the video becomes a lot better.
3) There is no way to adjust focus "manually," even though it should be technically possible.
So, spare me the condescending stuff about image compression, light conditions etc. **bleep**! And, YES, of course I have set the "video quality" to "TV high quality." Doesn't help. THE PROBLEM IS PURELY OPTICAL! Otherwise my eyeglasses would not help. No, they don't enlarge the image, they just help the focus. (And, no, you cannot borrow my glasses )
I've seen a lot of other discussions about this issue with the N95. None of them seem to give a good answer. Neither have I found a way of taking charge over the focal length. So, my questions are:
*    Has Nokia come up with a solution? Has anyone who has sent the N95 in for service actually gotten some help?
*    Is there some other software one can install that can do a better job than the **bleep** cam software of Nokia?
*    Is it possible to hack or tweak the existing software to change the set points for video? (I assume it goes into a mode like this: "Set focus at 034, resolution at VGA" etc. The "034" (a totally random number, not related to anything) doesn't fix on infinity. Could I hack the setting so that it goes "Set focus at 015, resolution at VGA"? (Of course, one would have to change numbers a couple of times to get it right.)
The N95 promised so much, but delivers so little (the camera is not the only problem), it is giving me an ulcer. Next time I'm not really motivated to get a Nokia! I want revenge. Apple, can you make me happy?

Just a little addon - yes, I have the latest software / firmware updates installed.

Join 2 tables which are not related with any primary-foriegn key constraint

Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.
How can i write the select query for this condition?
Thanks
Swapna

Hi, Swapna,
user11018268 wrote:
Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.I think you want a UNION, not a join.
If you have 10 rows in table_a, and 30 rows in table_b, then
SELECT       A_ID,          A_Name,     A_Address,     A_City,     A_Pin
FROM      table_a
UNION
SELECT       B_ID,          B_Name,     B_Adress,     B_City,     B_City
FROM      table_b
ORDER BY           2,               4
;will produce up to 40 rows; 40 if there are no duplicates. (UNION implies DISTINCT.)
The corresponding column types should be similar, if not exactly the same.
There's no problem if A_Name is VARCHAR2 (50) and B_Name is CHAR (30).
However, there will be a problem if A_ID is a NUMBER and B_ID is a TIMESTAMP.
You must have the same number of columns in all branches of the UNION.
If you want an ORDER BY clause, put it at the very end, after the last branch of the UNION.
You can use positional notation (where 2 means the 2nd column) like I did, or you can use names from the first prong of the UNION (such as A_Name).
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.I'm not sure what your mean about "Address Label".
Whenever you have a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables, and the exact results (formatted) that you want from that data.
You can concatenate all 5 columns into one VARCHAR2 column, if you want to.
You'll probably want to use RPAD (or simillar functions) to make the output line up nicely.
If any of the columns are not strings, use TO_CHAR to make string versions of them.
For example:
SELECT TO_CHAR (A_ID, '9999999')
     || '   '          -- leave a little space between the left-justified a_id and the right-justified a_name
     || RPAD (A_Name, 25)
     || RPAD (A_Address, 50)
     ...Edited by: Frank Kulash on Nov 14, 2009 10:11 AM

ADT error "File [file] is not relative to directory [output]"

Has anybody come accross this error before when adding files to include to via ADT?
For example:
adt -package -target ipa-test -storetype pkcs12 -keystore my.p12 -storepass mypass
-provisioning-profile my.mobileprovision my.ipa my-app.xml
my.swf icons Default.png "../../../resources/fonts/FutuBd_.ttf"
In this case I am trying to include a file in the archive that is relative to the output directory.
My output directory is:
c:\projects\game\repo\bin\ios\
My font is in:
c:\projects\game\resources\fonts\FutuBd_.ttf
However I get the error:
File ../../../resources/fonts/FutuBd_.ttf is not relative to directory c:\projects\game\resources\fonts\FutuBd_ttf
But it actually is!
Anybody have any idea?

Yeah, sorry Colin, that is indeed what happens (CD first to swf folder). That isn't the exact command line either - I cobbled it as an example. The main point is that at works absolutely fine without including external files (generates an IPA etc), but as soon as I do include files (other than icons or Default.png etc), it doesn't work anymore. Some more info:
- If the files are in the same folder as the swf, and included without a path (filename only) it works fine
- If there is a relative path that is incorrect (i.e. there is no such file), the error is different (file does not exist)
- However, if the relative path is correct (there is a file there) the error is as above
- Quotes or no quotes makes no difference (quotes are there for the 'space in file path' problem)

Convert a catalog form PSE 7 to PSE 13 : Conversion works, but images are not related to the catalog anymore so you have to connect each single picture !!! How can I get the right relation automatically ?

My images are not related to the converted catalog, only preview works, tags and other information is given, but the (network) path to the original images is missing and is substituted by a local path with c:\. How can I solve the problem automatically ?

I actually need to apply this to at least a couple different layouts. Two exampled below (The outlined boxes are text areas, the black boxes where the product images will go.)
I prefer InDesign5, but I have 6 too.

How can i change the icloud account on my iphone?? so that this account is not related to my iphone any more

How can I change the icloud account on my iphone?? so that this account is not related to my iphone any more.....

tohamy wrote:
How can I change the icloud account on my iphone??
From the More Like This section on the right
how to change icloud account on my iphone

Looking for app or technique to record to dvd individual chapters from a movie dvd i own, not related to idvd or iMovie?

looking for an app or technique to record to dvd individual chapyers from a movie dvd that i own? not related to idvd or imovie

Is this a commercial copy-protected DVD or a home-made video DVD?

How to reset the password in macbook Pro? This is not related to apple id

Hi,
I gave my macbook pro for service. Initially there was no password set up in the system. However the service guys have put some password to install the applications. (This is not related to apple id and apple store apps). Can you please help how to reset the password?
Regards,
Arjun K M

Welcome to Apple Support Communities
As you have OS X Mountain Lion, try resetting the password from Recovery > http://discussions.apple.com/docs/DOC-4101
It looks like OS X was reinstalled. After resetting the password, you will be able to log in and use your MacBook Pro

My trackpad is not working correctly. Cursor not moving as desired. Not related to water

Trackpad not working. Not related to moisture etc. Moves independently and switches between screens without prompt.

Hello Rosanne,
It certainly can be inconvenient and frustrating when your trackpad is acting erratically. I recommend reviewing the following article for an issue like this:
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/ts1449
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problem not related to Norton

Similar Messages

Maybe you are looking for