Problem Occrued in Data loading (Time Stamp Error)

Hi,
Iam scheduled info package after its showing time stamp error in the monitor menu header status is red and details menu 0 records . time stamp error in the source system.
my problem is i have all genric transaction data sources i checked in R/3 in RSA3 and Rsa6 i excuted in that particular data sources are active and its contain some records also.
before loading the data i replicated all data sources these all active in BI system. but once scheduled the infopackage all data sources going to in active status.
i Tried to Execute T code SE38 in BW give programme name as RS_Transtrucuture_activate .
but i dont have authorisation these program to excute.if i want get authorisation i have to wait 3 days.
please suggestme another solution procedure.
Regards,
Diwa(Devakar tati Reddy)

Hi,
I am not sure about what BW version are you using. I hope you are using 3.5 or low. After Datasource replication you need to activate your transfer structure / infosource. I understand that you dont have authorization to run the SE38 program to activate the transfer structure. But, you can also try to activate each transfer structure/infosource individually through edit mode of the same. This is the only way out if you donot have the authorization for SE38.
Regards
Kishore

Similar Messages

Data load time out error.

Hi Gurus,
We have initialized one of our infocube, its having more then 14lakhs of data. each PSA data packet(90 in number)contains 15k odd record. Out of the 90 PSA data packets,10 successeded while yesterday night load scheduling, Now I am scheduling each packet individually through manual upload by right clicking on the data packet, every time its resulting in runtime error.
Itu2019s a highly time consuming load, so canu2019t schedule it again.
Do you have any other solution?????
Thanks in advance,
Kironmoy Banerjee.

Hi,
try to see which step in the package it is taking the time....is it the start routines??
just see if there are start routines in the update rules.
May be you should reduce the size of the data package when you first loaded but since you are alredy loading it from PSA its not possible.
if you can delete the request again and reload it again via PSA and this time reduce the size of package to may be 5000 or 4000 then it should load.
You can do the settings for nthe infopckage which you are using to schedule the load..go in the infopackage .... infopackage->schedule->datas. source option..
change the size for the delta as well as for full loads.
then the schedule the loads again...do an init without data transfer and a full repair without selections this time.
Thanks
Ajeet

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

Time Stamp Error: Cannot display system date and time. My VI display "YYYY-MM-DD" instead of "2014-08-02".

Hi All,
I am using Labview8.5 and Windows XP OS.
My Problem is my Labview TimeStamp cannot display current system date and time.
Please see my attachment for the screentshot.
The TimeStamp or ever Format Date/Time String display "YYYY-MM-DD" instead of "2014-08-02".
I tried other computer machine and it works. There are some computer machine has this problem.
How can I resolve this issue? Please advice. Thanks.
Best Thanks,
Jessie
Attachments:
Time Stamp error.JPG ‏68 KB

Bill,
reviewing the thread Dennis linked (thanks for that) reveals that it is the same account which opened this thread here three month later.
What bothers me is the fact, that the past thread is marked "solved" even though it obviously isn't. Or the OP is trolling us.....
Nevertheless, it seems like systematic error. Connected to specific machines.
What makes the machines where the time stamp issue occurs "unique"? If there are several, is that source really "unique"?
Most obvious reasons would be:
- Language settings (possibly the infamous "dot-comma-issue")
- Time zone settings (e.g. what happens if you switch Ulaanbaatar to Perth or maybe even some US time zone?)
- Missing hotfixes for Win and LV
- Is the system running as virtual machine vs. "native"?
Not so obvious differences:
- Specific CPU type
- Motherboard/BIOS
- LV ini settings
There are tons of other possible reasons (e.g. corrupt LV installation), but these are the ones i came up with within a couple of minutes....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

SQL Loader Oracle 10g problem in upload date with time data -- Very urgent.

Hi
I am trying to upload data using SQL loader. There are three columns in the table
defined as DATE. When I tried upload a data like this '2007-02-15 15:10:20', it is not loading time part. The date stored as 02/15/2008' only. There is not time on that. I tried with many different format nothing work. Can please help me ?
I have also tried with to_date --> to_timestamp it did not work.
The application is going to be in production, I cannot change DATE to TIME STAMP. This is very urgent.
LASTWRITTEN "decode(:LASTWRITTEN,'null',Null, to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:Mi:SS'))",
CREATEDON "decode(:CREATEDON,'null',Null, to_date(:CREATEDON,'YYYY-MM-DD HH24:Mi:SS'))",
LASTUPDATEDON(21) "decode(:LASTUPDATEDON,'null',Null, to_date(:LASTUPDATEDON(21),'DD/MM/YYYY HH24:MI:SS'))"

Your problem is most likely in decode - the return type in your expression will be character based on first search value ('null'), so it will be implicitly converted to character and then again implicitly converted to date by loading into date column. At some of this conversions you probably are loosing your time part. You can try instead use cast:
SQL> desc t
Name                                      Null?    Type
LASTWRITTEN                                        DATE
CREATEDON                                          DATE
LASTUPDATEDON                                      DATE
SQL> select * from t;
no rows selected
SQL> !cat t.ctl
LOAD DATA
INFILE *
INTO TABLE T
TRUNCATE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
LASTWRITTEN
"decode(:LASTWRITTEN,'null',cast(Null as date),
to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:MI:SS'))",
CREATEDON
"decode(:CREATEDON,'null',cast(Null as date),
to_date(:CREATEDON,'YYYY-MM-DD HH24:MI:SS'))",
LASTUPDATEDON
"decode(:LASTUPDATEDON,'null',cast(Null as date),
to_date(:LASTUPDATEDON,'DD/MM/YYYY HH24:MI:SS'))"
BEGINDATA
2007-02-15 15:10:20,null,null
null,2007-02-15 15:10:20,null
null,null,15/02/2007 15:10:20
SQL> !sqlldr userid=scott/tiger control=t.ctl log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Feb 29 00:20:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 3
SQL> select * from t;
LASTWRITTEN         CREATEDON           LASTUPDATEDON
15.02.2007 15:10:20
                    15.02.2007 15:10:20
                                        15.02.2007 15:10:20Best regards
Maxim

Time Stamp Error In ODS

Hi ALL
When I tring to load data from ODS1 to ODS2,an error is coming like Time Stamp Error.
And when IAm trying to activate the Transfer structure,I could'nt able to find Activate Symbol?
What should I do now in oredr to activate this?
Pl help me out
Regards
Balaji

Hi
Eugene
Thanks for your valuable message.
As u said I went into that program and executed that and it asked for Source system and Infosource and updated and executed,but everything is in green but saying like Transfer Structure is not selected. and when I run the infopackage load is failing?
And 2 check boxes are there like 1.Lock Objects and 2. Inactive objects.
Should v need to select this.
What will be the problem?How to rectify it.
Pl let me know.
Regards
Balaji

Time stamp error, bug...

Hi all,
I am currently doing a lot of work late at night and I've discovered a replicable, strange behaviour in the finder.
All files saved at or just after midnight have a time stamp of "Today 24:03" (example only).
This should read: "Today 00:03".
Midnight in the 24h clock is 00:00, and 11:59 (one minute to midnight) is 23:59, so the moment the date changes, time should start clicking UP from 00:00.
24:03,4,5 etc. simply does not exist, it's like saying 75minutes past 4 for example...
What's going on here? Is there a fix?
cheers

Hi Venkat,
The units of data stored inside the data warehouse are timestamped so that each unit of data in the data warehouse has some element of time associated with the record. The timestamping of data warehouse data signifies that the unit of data is accurate as of the timestamp. In general, there are two ways that a record is stored in the data warehouse: discretely or continuously. In a discrete record there is one instant in time for which the record is accurate. In a continuous record, there is a span of time for which the record is accurate. These records form a larger definition of information over time.
Using timestamps usually leaves a gap in time between the timestamp being logged and the transaction being updated, however. Hence, some documents
may be missed if they have not yet been committed to the database. To mitigate
this risk, SAP often uses a safety delta concept, setting back a users timestamp selection for a few hours to avoid missing late updates.
Time stamp error's occur in different situations.Depending on the situation we need solve the problem..
Some times you need to replicate the data source and activate the transfer rules...
If copa load fails you need to act differentlyand so on..
Check these threads.
/message/3146401#3146401 [original link is broken]
Time Stamp Error
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=time%20stamp%20error&cat=sdn_all
Re: Time Stamp Error In ODS
Hope this helps.
Regards,
Ravikanth

How to tune data loading time in BSO using 14 rules files ?

Hello there,
I'm using Hyperion-Essbase-Admin-Services v11.1.1.2 and the BSO Option.
In a nightly process using MAXL i load new data into one Essbase-cube.
In this nightly update process 14 account-members are updated by running 14 rules files one after another.
These rules files connect 14 times by sql-connection to the same oracle database and the same table.
I use this procedure because i cannot load 2 or more data fields using one rules file.
It takes a long time to load up 14 accounts one after other.
Now my Question: How can I minimise this data loading time ?
This is what I found on Oracle Homepage:
What's New
Oracle Essbase V.11.1.1 Release Highlights
Parallel SQL Data Loads- Supports up to 8 rules files via temporary load buffers.
In an Older Thread John said:
As it is version 11 why not use parallel sql loading, you can specify up to 8 load rules to load data in parallel.
Example:
import database AsoSamp.Sample data
connect as TBC identified by 'password'
using multiple rules_file 'rule1','rule2'
to load_buffer_block starting with buffer_id 100
on error write to "error.txt";
But this is for ASO Option only.
Can I use it in my MAXL also for BSO ?? Is there a sample ?
What else is possible to tune up nightly update time ??
Thanks in advance for every tip,
Zeljko

Thanks a lot for your support. I’m just a little confused.
I will use an example to illustrate my problem a bit more clearly.
This is the basic table, in my case a view, which is queried by all 14 rules files:
column1 --- column2 --- column3 --- column4 --- ... ---column n
dim 1 --- dim 2 --- dim 3 --- data1 --- data2 --- data3 --- ... --- data 14
Region -- ID --- Product --- sales --- cogs ---- discounts --- ... --- amount
West --- D1 --- Coffee --- 11001 --- 1,322 --- 10789 --- ... --- 548
West --- D2 --- Tea10 --- 12011 --- 1,325 --- 10548 --- ... --- 589
West --- S1 --- Tea10 --- 14115 --- 1,699 --- 10145 --- ... --- 852
West --- C3 --- Tea10 --- 21053 --- 1,588 --- 10998 --- ... --- 981
East ---- S2 --- Coffee --- 15563 --- 1,458 --- 10991 --- ... --- 876
East ---- D1 --- Tea10 --- 15894 --- 1,664 --- 11615 --- ... --- 156
East ---- D3 --- Coffee --- 19689 --- 1,989 --- 15615 --- ... --- 986
East ---- C1 --- Coffee --- 18897 --- 1,988 --- 11898 --- ... --- 256
East ---- C3 --- Tea10 --- 11699 --- 1,328 --- 12156 --- ... --- 9896
Following 3 out of 14 (load-) rules files to load the data columns into the cube:
Rules File1:
dim 1 --- dim 2 --- dim 3 --- sales --- ignore --- ignore --- ... --- ignore
Rules File2:
dim 1 --- dim 2 --- dim 3 --- ignore --- cogs --- ignore --- ... --- ignore
Rules File14:
dim 1 --- dim 2 --- dim 3 --- ignore --- ignore --- ignore --- ... --- amount
Is the upper table design what GlennS mentioned as a "Data" column concept which only allows a single numeric data value ?
In this case I cant tag two or more columns as “Data fields”. I just can tag one column as “Data field”. Other data fields I have to tag as “ignore fields during data load”. Otherwise, when I validate the rules file, an Error occurs “only one field can contain the Data Field attribute”.
Or may I skip this error massage and just try to tag all 14 fields as “Data fields” and “load data” ?
Please advise.
Am I right that the other way is to reconstruct the table/view (and the rules files) like follows to load all of the data in one pass:
dim 0 --- dim 1 --- dim 2 --- dim 3 --- data
Account --- Region -- ID --- Product --- data
sales --- West --- D1 --- Coffee --- 11001
sales --- West --- D2 --- Tea10 --- 12011
sales --- West --- S1 --- Tea10 --- 14115
sales --- West --- C3 --- Tea10 --- 21053
sales --- East ---- S2 --- Coffee --- 15563
sales --- East ---- D1 --- Tea10 --- 15894
sales --- East ---- D3 --- Coffee --- 19689
sales --- East ---- C1 --- Coffee --- 18897
sales --- East ---- C3 --- Tea10 --- 11699
cogs --- West --- D1 --- Coffee --- 1,322
cogs --- West --- D2 --- Tea10 --- 1,325
cogs --- West --- S1 --- Tea10 --- 1,699
cogs --- West --- C3 --- Tea10 --- 1,588
cogs --- East ---- S2 --- Coffee --- 1,458
cogs --- East ---- D1 --- Tea10 --- 1,664
cogs --- East ---- D3 --- Coffee --- 1,989
cogs --- East ---- C1 --- Coffee --- 1,988
cogs --- East ---- C3 --- Tea10 --- 1,328
discounts --- West --- D1 --- Coffee --- 10789
discounts --- West --- D2 --- Tea10 --- 10548
discounts --- West --- S1 --- Tea10 --- 10145
discounts --- West --- C3 --- Tea10 --- 10998
discounts --- East ---- S2 --- Coffee --- 10991
discounts --- East ---- D1 --- Tea10 --- 11615
discounts --- East ---- D3 --- Coffee --- 15615
discounts --- East ---- C1 --- Coffee --- 11898
discounts --- East ---- C3 --- Tea10 --- 12156
amount --- West --- D1 --- Coffee --- 548
amount --- West --- D2 --- Tea10 --- 589
amount --- West --- S1 --- Tea10 --- 852
amount --- West --- C3 --- Tea10 --- 981
amount --- East ---- S2 --- Coffee --- 876
amount --- East ---- D1 --- Tea10 --- 156
amount --- East ---- D3 --- Coffee --- 986
amount --- East ---- C1 --- Coffee --- 256
amount --- East ---- C3 --- Tea10 --- 9896
And the third way is to adjust the essbase.cfg parameters DLTHREADSPREPARE and DLTHREADSWRITE (and DLSINGLETHREADPERSTAGE)
I just want to be sure that I understand your suggestions.
Many thanks for awesome help,
Zeljko

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

DATE and TIME Stamps

I'm a relative newbie still having issues with getting date and time stamps on my printed documents.
I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp.
Can anyone help me figure out my options in Mac for putting the following on a document:
A. DATE and TIME printed
B. NAME of document with LOCATION (I assume this is software specific?!)
Thanks for any help with this.
- Jon

Yes, ...and I was hoping to find a solution since I sometimes have the same problem!
But I'm afraid there is none. For sure I didn't find any fxscript function returning Date&Time. At the moment the best solution I know is what you suggested, Ian: capture twice, once in FCE for editing and once in iMovie for reading Date and Time.
I'd be glad to write and share a plugin displaying date and time if somebody is able to tell me what fxscript function (if any) should I use...
Piero

Inserting Current Date with time stamp in oracle database

Hi Experts,
I want to insert the current Date and time stamp in a field in the Oracle Database Table.
I am able to insert date but i am not able to insert the date with time stamp. Any Suggestions??
Thanks
Naveen

Naveen,
Do you want to get current date (from sysdate) with a specific format or transform a value containing a date/time value to insert it in ORACLE ?
Usually, you insert current datetimestamp in a date field using this :
TO_DATE(sysdate,'dd/mm/yyyy hh:mi:ss')
you may have to tweak the format pattern ('dd/mm....') according to your needs
if you want to transform a date, use something like this:
TO_DATE(your_date,your_format)
but make sure your format is compliant with your date, ie
TO_DATE('31/12/2008','MM/DD/YYYY') could raise error (litteral does not match) cuz ORACLE can't recognize 31 as a month pattern
Chris

Retriving records with the date and time stamp

I need to get all the records that were update between 08:36:06 AM and 8:36:09 AM on the12/15/2009
I am using this query it is giving me the right numbers (I think) because this condition GURMAIL_CPLN_CODE = 'UGAP', I would like something more
precise using the date and time stamp with the dates
12/15/2009 08:36:06 AM
12/15/2009 08:36:07 AM
12/15/2009 08:36:08 AM
12/15/2009 08:36:09 AM
select * from GURMAIL
where
PERMAIL_CPLN_CODE = 'UGAP'
AND TO_CHAR(PERMAIL_ACTIVITY_DATE,'MM/DD/YYYYHH24:MI:SS AM') >= '12/15/2009 08:36%'Thank you

Yes, but HH24 and AM cannot be used together:
SQL> select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual;
select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual
ERRORE alla riga 1:
ORA-01818: 'HH24' impedisce l'uso dell'indicatore meridianoUse this:
select *
from   gurmail
where permail_cpln_code = 'UGAP'
AND    permail_activity_date between to_date('12/15/2009 08:36:06', 'mm/dd/yyyy hh24:mi:ss')
                                and to_date('12/15/2009 08:36:09', 'mm/dd/yyyy hh24:mi:ss')or this:
select *
from   gurmail
where permail_cpln_code = 'UGAP'
AND    permail_activity_date between to_date('12/15/2009 08:36:06 AM', 'mm/dd/yyyy hh:mi:ss am')
                                and to_date('12/15/2009 08:36:09 AM', 'mm/dd/yyyy hh:mi:ss am')Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2009/12/18/table-elimination-oppure-join-elimination-lottimizzatore-si-libera-della-zavorra/]
Edited by: Massimo Ruocchio on Dec 23, 2009 12:05 AM

Date and time stamp on signature

Is there a way to date and time stamp a signature on ios?

991805 wrote:
Hi
Thank you very much for your reply. The problem is the time stamp is not coming on my dumpfile
So what are you getting?
Works for me:
#!/bin/bash
export ORAENV_ASK=NO
export ORACLE_SID=orcl
. oraenv
mydate=`date +%Y_%m_%d_%H_%M_%S`; export mydate
echo mydate is $mydate
expdp system/halftrack directory=data_pump_dir dumpfile=full_exp_${mydate}.dmp logfile=full_exp_${mydate}.log schemas=scott
ls -l /u01/app/oracle/admin/orcl/dpdump
2014-01-03 15:28:36
oracle:orcl$ ll
total 260
-rwx------ 1 oracle oinstall    300 Jan 3 15:27 doit
-rw-r----- 1 oracle asmadmin    116 Jan 31 2013 dp.log
-rw-r----- 1 oracle asmadmin 249856 Jan 3 15:28 full_exp_2014_01_03_15_27_34.dmp
-rw-r--r-- 1 oracle asmadmin   1974 Jan 3 15:28 full_exp_2014_01_03_15_27_34.log

Date and time stamp of user status does not appear

Hi, gurus.
For a specific transaction type, the date and time stamps for certain user statuses do not appear within the transaction although these missing date/time stamps are captured in the database upon checking by our ABAP. It seems that this problem started when I added several statuses and rearranged their status numbers in the status profile last year.
I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
E.g.
Status Profile
Status No.     ---       Status Code      ---            Short Text
10            ---                    IP1L                   ---       In Process 1st Level
20            ---                    IP2L                   ---       In Process 2nd Level
Date Profile
Display Position   ---       Date Type
1                          ---       In Process 1st Level
2                          ---       In Process 2nd Level
We're going to create and assign a new status profile for the concerned transaction type. We'll make sure that this status profile is sychronized with the date profile. Hopefully, the date/time stamps will all be displayed in prospective transactions but the problem on the missing date/time stamps in historical transactions will still remain.
Pls. help us.
Thanks in advance,
Theresa

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

Date and time stamp transfer via Firewire

Hi
Having issues with a Sony micromv camcorder transferring digital recordings via fire wire to Apple macbook- the files are transferrred without the date and time stamp on it. Any way around the problem. Thanks

ebigglesworth,
I too am curious about Frank's mention of the date and time removal tool.
As an aside to your comment:
I'd rather just be able to tell aperture I don't want the time stamp on the image, to remove it some how digitally, if that makes sense. You'd think it could just be backed out in some fashion.
That's impossible. Your camera made it impossible. Your camera threw out some pixel data of the real picture in favor of replacing it with yellow, white, and black pixels (or whatever color your timestamp is). Basically, the original photo information is completely lost. All you can do is smudge things (in one way or another) and make the best of it. It will never look completely right unless you use a pixel editor (which Aperture is not) and painstakingly put color in, pixel-by-pixel.
nathan

Problem Occrued in Data loading (Time Stamp Error)

Similar Messages

Maybe you are looking for