Problem occured in process order CLOSED
Hi
i want to close the process order , but system not allow to close the prder
and give errors ..like
1) Balance of ORD 10009314 is not zero
Message no. KO115
Diagnosis
The balance on object ORD 10009314 is not zero. That is, there are still costs on the object.
System Response
The object cannot be closed and the deletion flag must not be set.
Procedure
Settle the object before you close it or set the deletion flag.
2) Unprocessed future change recs for order 10009314 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 10009314. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations
but we not doing costing and settlemt and even not calculated WIP also
with out this i want close the order with forcely .. is there ant option is there
hi anand
I followed ur procedure
but 1 error occured
Unprocessed future change recs for order 10013669 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 10013669. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations
Similar Messages
-
Problem on creating process order
Dear Team,
I have a problem on creating process order thru COR1 where the basic start date only accept and follows current date. Basic finished date, no problem. Previously, i can set the basic start date using previous date / date in the past (in the same current month). I'm using "Only capacity requirements" for scheduling type.
is there anywhere in the SAP config that i can check?
and why this problem occured?
ThanksDear Tallha,
Here is screenshoot of my process order. the basic finished date is automatically changed to current date. (date entered 1/5/2014)
Thanks -
After Effects Warning: A problem occurred when processing OpenGL commands
Hi There Fellow Adobe After Effects Users.
Please could some one help assist me with the following error i am getting.
I bought a template and needed to do a logo animation reveal. It was done using After Effects CC for PC.
AE had to then convert it to Mac which did so successfully. I was able to modify, add my logo and render out.
The following day i opened the file again and it gave me the follwoing error:
"After Effects Warning: A problem occurred when processing OpenGL commands"
What is confusing to me is that this issue would normally appear if my graphics cards did not support OpenGL, and it would not have opened in the first place if it was not supported.
My graphics card is a - ATI Radeon HD 5770 1024 MB - running Mavericks OS. So i know that this card does support GPU acceleration.
Please could someone point me in a direction that will fix this.
Thank you so muchThank you for the update Mylenium.
If I look at my display info, the card says OpenGL engine. Does this mean anything?
If it's not supported, then what's the point in purchasing a Mac If you cannot use AE's full capacity. Mac doesn't put Nvidia cards in there machines and on the Adobe website, ATI cards ate not listed; but in the same breath it says that most ATI cards that have come out in the past 5 years are supported. Surely Adobe and their technicians must have spoken with Mac technitions.
I am considering to buy the new Mac Pro; but am definitely going to change my mind if I cannot use AE's full compatibility. I don't see why spend so much cash if the cards aren't great.
Please could you then tell me what functions to switch off in the project file. I'll get the guy whom I bought the template from to switch of those functions.
Thank you.
Have a great day -
After Effect warning: A problem occurred when processing OpenGL commands
I have After Effects CS6 in a computer where also CS5.5 is installed. 64bit windows 7 Ultimate 20GB memory and two AMD Radeon HD 6900 Series Display adapters with drivers updated an hour ago (Driver date 27.7.2012, version 8.982.0.0).
When trying to use After Ecffects, I get error message "After Effect warning: A problem occurred when processing OpenGL commands" immediately when clicking Composition window.
What could be done?Not much, I'm afraid. You probably need an older graphics driver. Other than that you could always disable the second card or play with the configuration. Unfortunately some not so smart person decided that CS6 would no longer need manual OpenGL control for the user, so there's no way to suppress it from within the program to force-revert to software-only modes in case of such issues...
Mylenium -
( CS 6 ) ... problem occurred when processing opengl commands.
Hi everyone
I'm using After effects CS 6 ( 11.0.2 )
Mac Os X ( 10.8.3 Mountain Lion )
ther's a error message that pops up every time I open a composition and scrol to a certain point ( the moment when optical flares ( Video Copilot ) starts )
after effects warning: a problem occurred when processing opengl commands.
the error essage pops up - I pres ok - it pops up again repedetly until after effects crashes
( I got a lot of 3D stuff in this composition - 1 camera but no ligths or such - no cinema 4D or 3rd party progras involved )
I hope anyone is able to help me
I already googled my problem a couple times and I just found results for after effects CS 4 or CS 5.5I recreated my composition by turning off the render stuff and just copiyng all of those effects into an new comp - I also reinstalled the plugins - some of em like twitch werent installed prperly so they didnt render or such - or just update after effects all of this plus restarting my iMac helped me ( didnt shut it down for 3 months - worked perfectly fine by the way - that says actually a lot about apples quality ( HUGE FAN ) )
-
Process order Closing problem..
Hi...
When i try to close the process order using CORM...i m getting error as......
"Unprocessed future change recs for order prevent del. flag/completion"
Plz can anybody help me on this issue...
Also now if I try to cancel the order using CORS...i get error as...
"Activity lot size dependent duration cannot be entered"
Regards,
Ameya k.Hi
This program can be used to clean open prod orders.
please read below documentation:
The program CORUPROC can be used to post preselected processes for
confirmations.
The following processes can optionally be preselected:
o Automatic goods receipt
o Backflushing
o Calculation of actual costs
The program CORUPROC is normally used in periodically dispatched
background jobs. However, it can also be started online.
If the program is used in a background job then this is only by
specifying a variant to make possible the parametrization of the program
CORUPROC.
The following parameters are possible:
o goods movements
- automatic goods receipt
- backflushing
- Incl. incorrect goods movement: Not only preselected but also
incorrect goods movements that are usually processed with
transaction COGI are are selected and processed. The indicator
"Automatic goods receipt" and "Backflushing" are also taken into
account.
o Determination of actual costs
You can define further parameters for controlling the program flow in
Customizing using the transaction OPKB. The following parameters are
involved:
o Number of parallel processes: You can use this entry to restrict the
number of simultaneously processed portions. If no number exists the
system calculates the number of the maximum available work processes
on the application servers that are available. The number of
parallel processes along with the parameters "Maximum number of
items in material document" directly affect the total number of
active locking entries in the global locking table.
Application server group: Using this entry the system can post goods
movements in parallel to a predefined group of application servers.
The RFC groups can be maintained using the menu options "Tools ->
Administration -> Administration -> Network -> RFC destination, RFC
-> RFC groups".
Maximum number of items in material document: You can use this entry
to specify the number of goods movement items used to create a
material document. If the entry is missing then a maximum of 100
goods movements are copied to a material document. This entry is
necessary since with a large number of items the accounting document
cannot be posted.
regards
Srinivas -
Costing problem while running Process order
Hi,
This is a problem relating to costing of HALB material.. While doing process order for a fert material (BOM of FERT material contains a HALB and two ROH materials) a window occurs while saving ' Error when calculating costs, see log'. Why is this happening? I have checked the BOM , all components are subjected to cost relevancy (X). For HALB material no values are manually maintained in planned price 1,2,3 fields in Costing 2 view of material master. Do we have to manually maintain or will it be taken from the ROH materials in HALB BOM. For ROH materials values are comin in planned price 1,2,3 fields in Costing 2 view . If this has to be done what is the configuration. The ultimate issue is while running process order for FERT material no costing is happening for HALB material.Pls share your suggestions. Rewards assured.
regards
AshokHi,
when you have raw semifinish and finish material as in sequence then first order of semifinish has to be created and it will capture raw material cost and other expences if incurred after confirmation of semifinish material you will be able to create a finish material production order b' cause that semi- finish material yo have to consume for finsh order.
if at all first sfg order has updated the price of sfg (after settlement of order) then it will take correct price for finish material
reward points if you find it useful. -
Problem in printing process order.
Hi dudes,
Our users are taking print of process order after release status and then the goods movements will be carried out manually. There is a problem with some orders belongs to one material where the some of components in process order are not getting printed. one or two are missing.
Please suugest is there any note related to the specified issue
RobertDear,
Pick list is sorted on material number and not on item num ber, hence you may see that difference.
Some of the materials may not come if the final issue tick is active.
The process order can be printed in COR2 screen itself.(Ctrl+P
But for the preview after printing, you can view the spools created in SP01.
Transction code : CB85
Maintain the parameters from order type PI01.
Please refer this thread also,
[Printing process order|Re: Print Process Order]
Regards,
R.Brahmankar -
Process order closing when TECO...
Hi Gurus,
Can anybody help me to close the process order having status as...
" TECO PRC BASC BCRQ CNC MANC SETC VCAL"....
In short...The order was not released and confirmed....Just the order was created and then TECO'ed....
Thanks,
Ameya K.Hi Ameya,
You can only perform (business) closing for a process order if:
The order has status Released (REL), Control recipe created (CRCR) or Control recipe discarded (CRAB), or Technically completed (TECO). To have status Technically completed, the order must have already reached status Released.
The order balance is 0.
There are no more open purchase requisitions, orders, or commitments for it.
All data related to the process order is available and correct (For example, the inspection lots for the order must be completed).
There are no future change records from the confirmation processes.
So revoke TECO, set to REL , then change to TECO & CLSD.
Hope this resolves your issue
Venugopal
Reward points if it helps you -
Problem with creating Process order confirmation using BAPI
Hello,
While creating Process Order confirmation using BAPI_PROCORDCONF_CREATE_TT, material document is getting created. But a line item is inserted in the table AFRU without material document number. When it is created manually using the transaction COR6, the table is getting updated with material doc in the line item. Can anyone let me know what other attributes to be passed in order the update the same?
Thanks in Advance.
Regards, Senthil G.Hello , I am working with the same Bapi, can you please send me the code to fill the parameters, if I find the same error like you, I will send you the solution if I correct that.
Thanks for your help.
[email protected]
Guatemala, Cempro ADATSA -
Error occur during process order release.
hi, i am doing my practice for production planning during one of the transaction mb1c i am getting an error which is related to finance module please can anyone help me to resolve this error..following are the details
when i am doing the transaction (MB1C) , I am getting the error message
"For opbject RF_BELEG 3000,number range interval RR does not exist FBN1.
Message no: NR751
Diagnosis: The data base table NRIV has the delivery class "c" i.e the sap default settings are only in client 000.
Procedure: Create the missing number range interval customizing the Transaction code :FBN1THANKS Alot for the promt reply, i really appreciate it..
WELL I DID IT BUT WHEN IM ENTERING THE NUMBERS THEN PRESSING ENTER IM GETTING AN ERROR MESSAGE
"ENTER NUMBERS WITH OUT OVERLAPS"
PLEASE HELP... -
Problem during Process Order creation
Hi,
I have problem while creating Process Order.
I have maintained all the basic data required to create the process order.
When I Release the order, I am able to create the control recipe also, but PI sheet is not generated along with it. System gives the message "No PI maintained in customising for CRD for which control recipe is to be generated "
If I maintain the same, then system is unable to create the control recipe.
What may be the problem here? What i can do to rectify this situation?
PavanHi Pavan,
1. Maintain PI in SPRO of process management
2. Assign this PI to one of phse in master recipe
3. Plz check wheather ur created Control receipe destination or not.
4. if not then maitain the same in Spro.
5.Check the ordre type dependent parameter i.e COR4 from SPRO
see the Control recipe gerated in REL phse else maintai the asme in production scheduling profile.
if possible plz send the sctren shot fir the same to
[email protected]
Regards
Siddhesh -
Error during Process order settlement
Hi Gurus,
i am facing problem during the process order settlement. an error is occured is as follows: Tax code V0 country IN does not exist in procedure ZTAXIN.
actually this V0 tax code is assing to the ZTAXIN procedure & which is also assign to country. i couldn't get why it ask tax code during the settlement.
In Process order Itemization i find the 2 GL ( Element) in which there is one consumption GL & second is COFG sold GL. from GL Master i remove both GL Tax category & also remove the click from posting without tax allowed. till i am facing this problem?
Please help me to overcome this issue.
Point will be rewarded if question solved.
Than'x
Dhananjay Rhi gopan,
Than'x for attention on my question. till my problem is not solved. during the process order why it hit the tax code? would u please guide me how to find the tax code assignment which hit during the process order settlement?
i have check all the Tax related setting till this issue not solved. ( Check calculation procedure (OBYG), Tax code assignment (FTXP), also check the Tax Account Integration (OB40).
also i remove tax related assignment from the GL master related to specific gl which are display in component structure.
pls help me to solve this issue..
Than'x
Dhananjay -
Process Order Partial confirmation (PNCF) and Final Confirmation
Hi expert,
I'm already running t-code COHVPI to mass processing process order so it status change from TECO to CLOSED. But there is an error message "process order partially confirmed". Is that true if process order must be final confirmed before it changed to CLOSED. Should we change the status of partial confirmed (PNCF) to Final confirmed (CNF) before process order CLOSED.
Please give me a suggestion.
Thank you.Correct. Final Confirmation is THE signal to the rest of the world that that this order is DONE (at least from the GR standpoint). This will also retire the order from the APO/SNP radar.
-
Create process order confirmation
Hello,
I use the Bapi 'BAPI_PROCORDCONF_CREATE_TT' to create a confirmation in our Z program to replace 'COR6N'.
The only problem I meet is that it makes a material document for the good movements but don't write it in the table AFRU (field WABLNR).
Do I miss something in the BAPI??
I run the BAPI like that:
CALL FUNCTION 'BAPI_PROCORDCONF_CREATE_TT'
IMPORTING
return = lwa_return
TABLES
timetickets = gt_timetickets
goodsmovements = gt_goodsmovements
detail_return = lt_detail_return
The tables gt_timetickets & gt_goodsmovements are filled with relevant values.
Could anyone help me to know what make the doc no. to be written in AFRU?!!!
Thanks in advance,
FaribaHi Fariba,
I am facing the same kind of issue that you faced long back. If you have resolved this issue, can you help me by replying back to the thread Problem with creating Process order confirmation using BAPI
Thanks in Advance.
Regards, Senthil G.
Maybe you are looking for
-
Custom field not getting displayed in SUS PO item level
HI all, We are using SRM 5.0, ECC6.0 and ECS scenario. As per SAP note 762984, we have enhanced the structures such as : INCL_EEW_PD_ITEM_CSF_SUSPO INCL_EEW_PD_ITEM_CSF and have added a record in the following place in SPRO: Supplier Relationship man
-
hi experts, while entering data in FB60,we encountered a problem stating "PAYMENT REFERENCE MANDATORY". WHAT IS DAT? AND HOW CAN IMAKE THIDS FIELD NOT NECESARY? SO THAT EVEN IF I DONT FILL IT UP IT SHOULD NOT SHOW ANY ERROR. PLZ REVART SOON. THANKS S
-
Function module to find number of table entries in Data base table
Hi All I have the urgent requirement to find out the number of table entries in a table using the function Module. if u know the Function Module name please let me know Thanks & Regards Rajmohan.G
-
need a guest password to connect my tab to the cisco router E900.
-
To activate costing based COPA while Account basedCOPA activated previously
Dear all, I have a client which currently using Account-based COPA which activated 5 years ago. Due to requirement to analyse production variance by variance categories, costing-based COPA needs to be activated. Can anyone tell me whether is it possi