Problem of 5800 screen comes in horizontal lines

Dear nokia team,
i have a wide spreading problem in my & similar phones nokia 5800
after i updated the firmware the screen come into horizontal lines doesn't show anything once i lock the screen and reopen the it again , the problem began when the mobile is in a room with cold temprature, when i warm it it works again,
but now the problem became more diffficult, not only in air conditioned rooms, but all the time ,
Please help me with the final solution ,
beware that my firmware version begin with 60.0... the latest one

Perhaps a reset of SMC may help it, the system management controller is a power manager of a sort and maybe if something is not seriously wrong, that could do. Yet screen resolution and other issues can be addressed by a reset of the NVRAM in a different procedure, formerly known as a PRAM reset.
However there are hardware circuits that also may be the cause of such symptom, and I'm not sure how you'd test for that. The computer shipped with a test of some sort on the original boot install disc, that could check some hardware items and try to repair the hard drive, etc. There may be display hardware troubles behind the symptoms you'd noted and if you can eliminate the software probability, then the possibility of a hardware issue may be the answer. A few parts could be user-replaced given experience and skill in doing these kinds of things, and there are guides to look into at http://www.ifixit.com/Device/Mac_Laptop
Read though and see if there is an indication a reset may help.
• Apple computers: Troubleshooting issues with video on internal or external displays:
http://support.apple.com/kb/ht1573 (note PRAM reset is NVRAM w/ intel-based Mac)
• Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
• About NVRAM and PRAM:
http://support.apple.com/kb/ht1379
Hopefully the a reset will help, as a troubleshooting measure or to eliminate ailments. A reset of SMC has been said to help in some cases because it also resets the power to the graphic card, so that is a possibility. And NVRAM may be another thing to try after SMC.
Good luck & happy computing!
{edited}

Similar Messages

  • 7th generation ipod nano only displaying white screen with blue horizontal lines

    Hi,
    My 7th generation ipod nano is now only displaying a white screen with blue horizontal lines along the bottom. It still plays music and is recognised in itunes with I connect it to my PC.
    I have reset is and restored it and it is charged.
    Please advise.
    Thanks,
    Jess

    Hi jkjuarez2012,
    Thank you for visiting Apple Support Communities.
    It sounds like your iPod nano is only showing the Apple logo with a white background, and you've tried many good steps including resetting and restoring the device. I know I'd miss my music in this situation.
    Make sure that you followed the steps in this article when restoring your iPod:
    Restoring iPod to factory settings - Apple Support
    If the issue continues after restoring, your iPod nano may need to be serviced. You can use this link to find out more about iPod service:
    If the issue is still not resolved, please read this information on servicing your iPod.
    From:
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Best Regards,
    Jeremy

  • Black screen on startup; horizontal lines on screen precede crash

    A few days ago my Mac Book Pro screen freaked out. Specifically, it had multicolored horizontal lines all over, but underneath I could see a dark grey dialogue box telling my to restart the computer.
    Now, about two thirds of the time, when I try to start up the screen stays black and it does not make any startup noises but the power light comes on steady. One time this was accompanied by a beeping tone that beeped in sets of three. The other one third of the time it starts up fine.
    Once it shut itself down after the horizontal lines appeared again.
    Once it has frozen while on the screensaver and I had to manually shut it down.
    Any idea what might be causing this? My computer is still under warrantee but I live over an hour and a half from the nearest apple store.

    Welcome to Apple Discussions!
    If you have the NVIDIA GeForce 8600M GT video chip, you might be developing this problem:
    http://support.apple.com/kb/TS2377
    The beeps and kernel panic do seem to point to a RAM problem. If you replaced the original Apple RAM with 3rd party RAM, try the Apple RAM if you still have it and see if this cures the problem. Otherwise, try reseating it as described earlier.
    Here is an article that may be of help:
    http://www.thexlab.com/faqs/kernelpanics.html
    Finally, since you are so far from an Apple Store, call Apple on the phone and explain your problems. It's possible that they could refer you to an AASP in your area that could evaluate your machine and save you a trip. It's also possible they could determine that you have some sort of hardware problem and could send you a box to ship your Mac to the Repair Depot. In any event, be sure to contact Apple while your warranty is in effect and get a case number, especially if you are getting close to the end of your Applecare.
    Good luck!

  • I'm using Win 7 and Firefox Screen fills with horizontal lines,

    Had no problems with previous versions of FF. I updated with FFv4 several weeks ago and have my browser screen continually being filled with horizontal lines. I can remove some of them by using the vertical scroll bar but they return when the display contains a lot of text. Sometimes when display is pictures or videos I am spared. This never occurred before FFv4. If a screen contains a few pictures and is engulfed in lines I can scroll it with my mouse and some pictures reappear but there are still lines over the rest of the display. I use an antivirus (BitDefender) and scan regularly. I also use Windows Defender for protection which was recommended by my AV manufacturer.
    Sometimes of late I have noticed that when the display is no maximized the problem doesn't happen as often. I use a 19" monitor.
    So far tonight while writing this note I haven't experienced a problem but the window is not set to max.

    I had this problem as well. For me, the solution was to disable the two latest add-ons I had installed: Cooliris and HP Detect (I have a Pavilion dm1z). The issue with horizontal lines went away after restarting the browser.

  • My ipad screen goes funny horizontal lines then it switches off

    my ipad2 screen goes funny horizontal and vertical lines appear then it switches off or goes to home screen

    Try a Reset (Hold the Home and Sleep/Wake buttons down together for 15 seconds).

  • Apple air's screen has several horizontal  lines

    screen has several horizontal lines

    Is this related to Aperture? Did it start happening with a Yosemite update? More details and whether this is a new problem would be helpful. How are we supposed to help otherwise?

  • Screen randomly flickers (horizontal lines) -- Is it hardware or software?

    In the last week my macbook screen has started to flicker...
    This happens when I'm surfing, working on photos, and doing other tasks...
    The the flickering seems very horizontal and is completely random in the time (mostly only for a second or two a few times a day) and the amount (less then 10% of the screen 90% of the time).
    I cannot tell of it's hardware or software.
    What can I do to solve this issue?
    *Are there any questions you could ask that could help troubleshoot this problem?*

    To my experience, it is hardware problem. Screen flickering is a complex problem because it can be caused by the logic board, LCD screen or inverter. Most of the time the problem is caused by the video components on the logic board. You can connect your MacBook to an external display to narrow down the root cause of your screen flickering problem.
    If you have further question or need help, you can send me an email. I am glad to reply your email.

  • The built-in iSight on my iMac no longer works on Skype an camera booth.  Is that a software or hardware problem.  the video screen shows no picture but just horizontal line. Any suggestions?

    Hello,
    The built-in iSight camera stopped working for Skype and Camera booth giving each screen the same horizontal lines. Is this a software or hardware problem.  What insight and advicecan you give me.  I would be greatful.  Thanks
    Georges

    Is the little green light on?
    Open Console in Utilities & see if there are any clues or repeating messages when trying one of those Apps.

  • Screen Sharing (10.6 viewing 10.5) shows a screen of horizontal lines

    I use Screen Sharing 1.1.1 on 10.6.4 to access my iBook G4 and my wife's Power Mac G4 (both running 10.5.8).
    A week ago I attempted to view the G4 screen. Instead of the normal display, Screen Sharing showed a screen of colored horizontal lines of varying heights. There were a few random blocks with different color lines. Nothing on the screen was recognizable.
    The same display problem just occurred with an iChat screen sharing session (iChat 5.0.3 viewing iChat 4.0.8 on the G4). Restarting the G4 cleared up the problem.
    My search of Apple Discussions has not turned up a report of this problem.
    -- Ward

    Hi,
    I have not seen this either.
    I have 10.5.8 on my G4 and a MacBook Pro running Snow Leopard.
    I have heard of issues and can recreate them if my G4 has a second Monitor/screen connected and Mirroring is not On as the iChat Screen Share tries to fit both on to the Shared view (i.e two Screens wide instead of only one.)
    I presume the Screen Sharing app would be the same.
    Do the G4 users have the Screen Zoomed or any other option set in Universal Access ?
    Does changing the resolution in System Preferences > Displays change anything ?
    7:13 PM Wednesday; August 25, 2010

  • Why I there a grey horizontal line on my iPad 2 screen

    Just noticed that when I enlarge the screen a grey horizontal line appears in he middle of the screen?

    You can try resetting it by holding down the home and sleep keys until you see the silver apple, but honestly I'd make an appointment at hte Apple store and have them take a look at it.

  • PowerBook G4 Ti Display Problems It Won't come up full screen

    I recently bought this used G4 Ti 15" used thinking all it needed was a hard drive. I seems to boot up Okay I hear the startup tone, I can even reset the PRAM, but the screen comes up with lines and odd colors. Somtimes I can even see the "no system found" icon or the OS 9.1 startup screen, but I can't get the trackpad or a mouse via USB port to make the cursor move! The more I try, like by opening the screen slowly or even shaking it up and down while opening it, the worse it gets. It loks like the screen pixels all are lighting up, but I can't get a full screen picture.
    I even tried booting up using FireWire off another iBook and I can almost see the icons until they start fading away.
    I'm not sure if it's the logic board, since the USB ports don't work; if it's the screen itself or the wiring to the screen; or if it's the inverter board.
    I have taken this apart twice now to check the screen cable since it seems to happen when I open or close the screen.
    I did find some cable connections that weren't seated well and I did find a small but POWERFUL magnet floating around inside.
    Should I just give this up and part it out? Any help would be welcomed.
    PowerBook G4 Titanium 15" Mac OS 9.1.x Not sure what processor speed this is...2001 date
    PowerBook G4 Titanium 15" Mac OS 9.1.x Not sure what processor speed this is...2001 date
    PowerBook G4 Titanium 15" Mac OS 9.1.x Not sure what processor speed this is...2001 date
    PowerBook G4 Titanium 15" Mac OS 9.1.x Not sure what processor speed this is...2001 date
    PowerBook G4 Titanium 15" Mac OS 9.1.x Not sure what processor speed this is...2001 date
    PowerBook G4 Titanium 15" Mac OS 9.1.x Not sure what processor speed this is...2001 date
    PowerBook G4 Titanium 15" Mac OS 9.1.x Not sure what processor speed this is...2001 date

    The backlight display wire was broken...I had to replace the LCD display and hinges! What a drag

  • 5800 screen corruption

    My 5800 has been fine these last 6 months but a few days ago it developed a fault whereby the screen corrupts when keylock off is selected.  Sometimes it clears in a second or 2 other times it refuses to come back and repeated use ot the keylock and the red button are the only cures.  The screen displays many horizontal lines and it is not possible to read anything but pressing the screen will activate any icons you touch even though you do not know which one you have pressed.
    I have the latest software update.  I have not tried a hard or soft reset.  Took it back to local store today but its a new fault to them. they have offered to send it away and give me a loan phone meanwhile.  Before I do that, I thought I would ask if anyone had seen anything similar.
    Cheers 

    hi i recently got successfully repaired my broken screen on my 5800 it was working fine for a few days and then i updated the Firmware to V5... when it turned back on after update the bottom half of the screen was white and the top half is corrupt and looks like 1cm chunk of what should be on the right of the screen is now on the left...it also effects the digitiser which leads me to believe that it must be a software problem.....ive flashed the firmware (V5) over and over again and still no difference during the flash process however when the screen says nokia local mode and the screen looks fine so this must be a software problem???? 
    if any one could help then that would be most appreciated!!!! 

  • Pav. dv3888nr horizontal line on DVD image and other glitchy things

    Whenever I play DVDs I have problems. Lately, its been a horizontal line or split across the DVD image.  I also get all kinds of burps and hiccups, and picture separation from sound that is usually solved by tapping in the mousepad.  (Weird!) This gizmo is still under warranty but I'm out of the country for a few more weeks.

    Yes, Apple is working on it. The information I gathered from AppleCare is that there is a "capture" procedure in US for those who don't like the lines on their machine.
    At this time, as there is not such a procedure in Europ, my decision is to return mine. The only way to return your PB is to call the AppleStore from which you bought it and ask them for a refund (if you are within the 7 or 14 days depending on the Country you bought it from) or an exchange .
    Applecare will only accept a repair, by the local Apple Certified center, but AppleCare is country specific which means that an applecare bought in Europ will not work elsewhere. Personnally, I declined the repair, because we all know that the defect has not been identified yet by Apple US, so that you can imagine what the local repair center could do !!!
    PS : I just identified the EXACT same line issue at my working place on a Sony LCD screen connected to a G5 DP 2Ghz. Strangely enough, the LCD has also colour set up problems. Moreover the same configuration at home (same SONY screen, G5 DP 1,8 Ghz) has no lining problem. This is the definitive proof to me that every lined screen are defective, even if hundred of them have been recently released.
    PB 1.5 Ghz & 1.65 DL, G5 DP 1.8Ghz , G4 400   Mac OS X (10.4.3)   airport express, iPod 3 & video

  • Any filters to help with horizontal line jitters on ntsc monitor

    Hey Guys,
    I am working on a project that has alot of office forms that appear on screen. The horizontal lines of the forms wiggle like crazy on the ntsc monitor. Is there any filters that can stop the jitters?
    I am using FCP studio
    Thanks
    Ymir

    Hi:
    You can try with the standard Flicker Filter and adding a very small Blur. You must find the exact recipe for your footage.
    Hope that helps !
      Alberto

  • Horizontal line on unlock in 9810

    I just bought a torch 9810 today, and after about 5 hours of usage, when I lock and then unlock the screen, a grey horizontal line appears for a maximum of a minute then starts to disappear. I tried removing the battery, resetting, and upgrading the OS. Nothing seems to work.

    Hi and Welcome to the Community!
    That does not sound good, but before we give up and recommend you go back for warranty evaluation, there's one thing more to try. When you upgraded the OS, did you do that "bare bones"? As in, leaving off all added apps and just putting on what was mandatory? While odd, it's possible that some add-on app (perhaps 3rd party) is doing this, so ruling that out would be one more step to take before you head in for warranty support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • IPod Touch 1st Generation doesn't work directly out of the box?

    I just bought a first generation iPod touch and first things first I plug it into my PC. Nothing happens on the iPod and on iTunes I immediately get a message saying "iTunes has detected an iPod in recovery mode. You must restore it before it is usab

  • X201 Access Connection​s doesn't recognize WiFi card

    Hi A week or so ago I ran Lenovo System Update, which prompted me to update the drivers for my WiFi card (Intel 6200-AGN). After the update Access Connections can no longer recognize the card. Windows still connects automatically to wireless networks

  • Document number in BAPI_DOCUMENT_CREATE2

    Hi All, Can some one tell me, do  i haive to pass the number to  DOKNR in BAPI_DOCUMENT_CREATE or it will take care the DOKNR creation itself, if i have to pass the number, can i pass the number which is generated randomly using NUMBE_GET_NEXT. And a

  • Document Types Assignment

    Hi, How can we change the docment type assignment to some of the transactions? For eg, vendor invoice, vendor payment and vendor clearing. Thanks, CW

  • Konqueror flash player[SOLVED]

    i want to install flash player on konqueror.i cannot find how to do it from wiki.i installed javaplugin but this is for other browsers.is konqueror a good broswer or i should use other? Last edited by kosgeter (2014-02-09 21:48:54)