Problem of Audio (Toshiba Satelite L305-S5908)

Good Afternoon, I have a Toshiba Satellite, and it does not play audio from a few days, then that is connected to a console to play audio mp3 files that were in it.
I checked the sound settings and it works correctly.
How can I correct this problem?.

Satellite L305-S5908 
Can't hurt to reinstall the driver.
   Realtek Audio Driver (32/64bit)
-Jerry

Similar Messages

  • Toshiba Satelite L305-S5955

    Hi,
    I am having two problems with my laptop.
    1. I purchased Microsoft 2010 and I have tried to install and it start installing and it freezes and it doesn't finish installing and I have had to cancel installation.
    2. I have tried to install java and it tells me that there is a program still installing and there isn't one installing.
    Please help.
    Alice

    Satellite L305-S5955
    We can't see your computer screen, Alice. You need to paint word pictures for us of what you see and what you are doing when you see it.
    I am not able to..
    For instance, that information is useless to us because it does not tell what you see - what does happen instead.
    -Jerry

  • Toshiba satelite l300 freezes

    i'm having problem with my toshiba satelite L300, since i format it with windows 7 it freezes with white screen sometimes its black after full boot up, sometimes it's suddenly turn off then on again. What should be the problem? Is it a hardware problem or its with windows 7 its 3 years old and i dont have the recovery disc because i didnt burn it and when i try to reset it was damaged. I can only use my laptop during safe mode.

    Does it work if you perform a clean boot?'
    How can I perform a clean startup of Windows 7 without my startup items to troubleshoot a problem?
    - Peter

  • Toshiba sattelite L305-s5919 problem

    hello guys i just got a toshiba sattelite L305-s5919 lapptop from america ....
    and while i am working on , it restart and i couldn't open it again always restart so i format it and i change it from windows vista to windows xp
    the problem is that i couldn't find the VGA driver and another problem that i cannot copy near paste anything from it ... and i cannot open the help to restore it so if anyone can help me i would be so pleased.... and thanks in advance

    Satellite L305-S5919 
    i format it and i change it from windows vista to windows xp
    Your model belongs to part-number family PSLB8U, which corresponds to European-models' part-number family PSLB8E.
    Go to the European download site and look up the Satellite L300 with Short Part No. PSLB8E.
    When you filter for Windows XP, you'll find there are 35 drivers, utilities, and so forth listed.
    -Jerry

  • Toshiba satelite S855-S5188 Freaks out and doesn't respond

    Hey, i bought a Toshiba Satelite S855-S5188 from NewEgg.com about two months ago, at first i thought it was nothing, which then Subsequently it ceased to occur for a period of time but now it has been starting back up, this time i have to Shut it down in order to stop it from continuing and to gain control of it again.
    What happens is, Randomly, With no specific Action, it becomes Unresponsive, like when i type it doens't want to type and then it Zooms in and out Crazy like, not only that the Cap locks seems to freak out as well, like the light that shows Caps are on is lit up, but the keys come out as if it's off and then the numbers come out as symbols as if i am Holding the Shift key down. this doesn't seem to happen with any one application, it happens when i play World of Warcraft or just simply turn the laptop on to log into Facebook and  i am sending a message. I hope it's something Easily fixed and this is my first Toshiba Laptop ever, as i only ever had two laptops this one included, but if some people are expierencing the same issue and such a response on the matter would be much appreciated, Thanks!
    Solved!
    Go to Solution.

    Since it's under warranty, Matthew, I would call Tech Support at 1-800-457-7777 about the problem.  When you first got it, it could have been immediately exchanged for another by NewEgg. I believe you have had a bad keyboard from the beginning.  The repair will be free under warranty. 
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Toshiba Satelite A125-2326 drivers needed

    Hi All, I need system driver help. I reinstalled the Windows XP sp3 OS on my laptop updated all updates and still need a few drivers that I can not find. Laptop model is a Toshiba Satelite A125-2326. I am looking for the drivers for Audio Device on High Definition Audio bus Ethernet controller Modem device on High Definition Audio bus SMS bus controller 2 so called unknown devices Vidio controller (VGA compatible) as stated by device manager, I am not looking for one of those sites that you have to pay for, when I fell that this is something that Toshiba should provide for their laptops for free, since I paid for them already when I bought this laptop. Thanks to all for your help and advice.

    Hello
    Visit Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and there you will find latest display driver for your notebook model.

  • Recovery Failure on L305-S5908

    I am working to repair serious issues with Windows Vista Home Premium 64-bit. I already have attempted to use the recovery discs and the system begins to load the discs and ends up with a blank screen with only a cursor. I do not have a recovery partition as this a new hard drive that has already been installed with the recovery discs in a previous issue. The system will not load in any safe mode and windows will only stay at the loading screen in normal booting. I have tried to perform hard drive diagnostics but the system does not boot or loads a blue screen error. 
    I wish to completely reformat the drive to install the recovery discs is there any way to format the hard drive and then install the recovery software from the cd's I have.
    Satellite L305-S5908  (Model #: PSLB8U-05202F)

    Satellite L305-S5908 
    I do not have a recovery partition as this a new hard drive that has already been installed with the recovery discs in a previous issue.
    The Toshiba recovery discs put the hard drive back to exactly where it was when the machine was new. That includes any recovery partitions.
    See the section Hard Drive Recovery Utilities, starting on p. 60 of the User's Guide.
       Satellite L300 Series User’s Guide
    -Jerry

  • Toshiba Satelite A305-S6858 Reboots and could not load Vista Normally but can run Safemode only

    Please help me...  I love this Toshiba Satelite A305-S6858 and I keep getting this problem.  I already tried to disable legacy support and the memory test says 4GB is working fine.  Please help me. 

    Satellite A305-S6858
    Let's start here.
    Boot into Safe Mode and open System Properties (sysdm.cpl). On the Advanced tab, click the Settings button at the bottom (under Startup and Recovery).
    What is the state of the Automatically restart check box? If it's checked, clear it.
    What is the state of the two fields at the bottom? Set things for a mini-dump as shown below.
    Does that give you a blue screen when you boot normally?
    -Jerry

  • Toshiba Satelite C75D-A7370 Cannot Recognize Crucial M500 SSD drive

    Goal:
    I got a Toshiba Satelite C75D-A7370 laptop and I upgraded from the internal HDD to an internal SSD drive.
    It is a Crucial M500 with 240GB SSD drive. Crucial says it is compatible with the Satelite model.
    Problem:
    When I enter the BIOS, Main-->HDD/SSD does not detect the connected SSD.  Any help?
    Troubleshoot:
    In the BIOS, I did the following:
    Turn off Secure Boot
    Advanced System Configuration: Switch Boot Mode from UEFI Boot to CSM Boot
    Advanced System Configuration: SATA Controller Mode is set to AHCI
    The laptop already has the latest version of BIOS:
    InsydeH2O Rev. 3.7
    System BIOS Version 1.4
    EC Version 1.20
    If I put the SSD drive in an external case with USB, Windows 8.1 can use the SSD drive as a USB drive. So I know the drive is working.
    Thanks in advance for your help.

    So close. But I spoke too soon.
    Check disk won't work. I tried scheduling it from the My Computer window or through an elevated command prompt (chkdsk /f /r).  No luck.  I've got the error message. I can post that later.  The very last line is this...
    766f6c756d652e63 3f1
    Did chkdsk /f /r from the rescue disk command line.  No change. 
    It counts down 10 seconds and starts to check disk. It errors out right away.
    From the rescue disk, startup repair.  That was fine, but didn't change the check disk results.
    The Microsoft Fixit I found earlier didn't do anything. I think it only checked for updates. 
    Could be Norton Internet Security, although I doubt it.
    When I put the Crucial SSD in I did a quick ntfs format and named that volume C.  In diskpart, I noticed the system reserved 100MB partition was letter C.  I think the main hard partition was D.  I switched the system 100MB to T and made the main partition C.  Within Windows, the servered reserved partition didn't have any letter -- except I did put a letter on it in diskpart from the rescue disk. 
    I just tried within Windows, making 100MB T.  And then I removed it. That was someone's solution online.

  • Kernel-2.6.31.6-1 on Toshiba satelite

    For owners of Toshiba satelite: kernel-2.6.31.6-1 does not work on Toshiba satelite A105 S2141. Bad things begin right at booting time after frase Loading ACPI modules.
    Last edited by m.bork (2009-12-30 08:23:30)

    I have the same problem with my Toshiba Satellite L505D with the latest install release. I get 'a lot' of acpi errors. The only way to get a successful boot is acpi=off or acpi=ht, so luckily it can see both cores. I thought it was because of a buggy DSDT table, but I can't actually boot the computer and copy the DSDT table to recompile it and try to fix the issues; it only loads the DSDT table if acpi is enabled, and I can't boot if acpi is enabled.
    I'm basically stuck using Windows 7, which has actually been a really nice OS, since I can't have any sort of power management in Arch. Not being able to have power management means not being able to use Arch, what good is a laptop if the battery wont last.
    Last edited by Sjoden (2009-12-28 22:46:52)

  • Toshiba Satellite L305 freezes/cr​ashes with power adapter

    Hello everyone
    My Toshiba Satellite L305 freezes/crashes when I plug AC power adapter . The laptop works fine on battery .
    Initially I thought it was because the OS was getting corrupt and because I misplaced the Windows vista installation disc . I decided to install Ubuntu 11.04/linux but this hasn't solved the problem.
    Then I thought maybe it was the power adapter so I bought a new power adapter and that hasn't helped as well . Finally I did some research and found some instances where this issue was seen due to the Dual Core / 2nd processor so I disabled multi-processing core to cancel the 2nd processor and annoyingly this hasn't solved the problem .
    So can anyone please give me some guidance on what the problem could be ? . Thanks for taking the time to read/advice
    Keethan

    I'd recommend replacing that adapter immediately.
    - Peter

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Problem with audio configuration

    when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

    I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
    instructions at: http://docs.info.apple.com/article.html?artnum=93698
    Thanks giterdone

  • I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

    I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

    Perhaps something here will help:
    http://support.apple.com/kb/TS1421
    Regards.

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Maybe you are looking for

  • Good receipt for  Qualtiy management.

    Dear Experts, How can perform  good receipt directly into the quality.

  • Communication channel cannot be deleted

    After deleting the scenario in Integration builder -configuration (Integration Directory) , the communication channel, receiver determination, interface determination ... should also be deleted. But I can still see the communication channel through c

  • Plugin for theme editor.

    Hi In order to customize themes in web Dynpro we need 2 things. 1. standard themes provided by SAP, which we can modify. which are available at following link.     https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/151c9556-0e01-0010- 

  • Unvisible files

    Every now and then when downloading files using either safari or opera, the don`t show up in Finder until I reboot. Is this a bug I have to live with, or does anyone know a way around it?

  • Can't remove known password (v11); no Protection option under Tools, no check boxes in Security tabs

    Hello, I am unable to remove a known password on a document (using version 11.0.3 currently, but also on older versions).  I have no "Protection" option under Tools and I see no "Remove Security" check boxes (or any check boxes) in the Security tabs.