Problem of backup/restore

hello,
I upgraded the UC520 pack software but i don't checked the backup and restore, when the upgrade was completed and i tried to do the backup, it screens this message error openin tftp.. UC500 loopback network (10.1.10.2) was unreachable and the phones didn't work, it shows registering all the time .what can i resolve this problem ?

The configuration was probably sent back to factory default then. You will need to reconfigure the device so that phones can register.

Similar Messages

Problems with Backup restore after HD replacement

Hi All,
I recently had my HD replaced on my Powerbook through Apple and I am having some significant problems trying to get everything running properly again. Prior to sending my computer out, I did have everything backed up on an external HD using Backup.
When I received my laptop back, I ran the "Restore" function in Backup but things didn't seem to restore properly.
For example, when I open up a Finder window and click on "Documents", I get the following error message: The Volume Documents can not be found". I get the same message when I click on "Movies".
When I open iTunes and iPhoto, none of my music or photos show up.
It appears that the data is on the HD though. From the Finder window, I click on the HD and then on the Users folder and I can see the data in a folder with my old User Name. I just can't seem to associate the data with my current account user name.
I am wondering if this has to do with the fact that they didn't rebuild my accounts that I had set up.
Any suggestions would be greatly appreciated.
Thanks!

Welcome to Apple Discussions, Rick.I did have everything backed up on an external HD using Backup.
That is fortunate, you can manually move those folders over to your new user. Do not move Desktop. Documents, Library. Movies, etc but rather copy and replace with the folders from your backup.
Here is a list of where your important data is stored ("~" stands for "home"):
Your data in ~/documents
~/library/application support/addressbook (copy the whole folder)
~/library/application support/iCal(copy the whole folder)
Also in ~/library/application support (copy whatever else you need)
~ /library/keychains (copy the whole folder)
~/library/mail (copy the whole folder)
~/library/preferences/com.apple.mail.plist *This is a very important file which contains all email account settings and general mail preferences.
~ /library/itunes (copy the whole folder)
~ /library/safari (copy the whole folder)
~ /library/imovie (copy the whole folder)
~/pictures/iphoto library
~/music/itunes
~/movies/imovie
If you want cookies:
~/library/cookies/cookies.plist
~/library/application support/webfoundation/HTTPcookies.plist
For Entourage users:
Entourage is in documents/microsoft user data
Also in ~ /library/preferences/microsoft
internet explorer favorites are in ~/library/preferences/explorer/favorites.html
EDIT: I am wondering if this has to do with the fact that they didn't rebuild my accounts that I had set up.Yes.
-mj

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

Problems with Full restore using Time Capsule backup???

For some reason my MacBook Pro recently crapped out completely, and I am trying to do a complete restore of the OS via a full backup I made with using Time Machine onto my Time Capsule disk, but I am running into some problems doing so and I was hoping someone might have some insight as to how I should deal with things at this point...
Here's where things get messy...
- I insert my Mac OS X 10.5 Installation DVD into my Macbook and boot from the drive, and I immediately choose the menu option to 'Restore from Time Capsule Backup'...
- After logging into my Time Capsule and then choosing the proper .sparseimage file to restore from, I click 'continue' and it brings me to the screen where I choose where I want to restore to (which in my case, is the one and only internal HD inside my Macbook Pro)
- The bottom of this window tells me that it's "Calculating space required to restore data..." but it simply hangs at the point with a spinning wheel indicating its still doing the calculating, but never actually presents me with the space required, not does it allow me to click continue to perform the restore?? I've allowed it over an hour to calculate the space required and it still just spins its status wheel...
This is where I am stuck at this point, and I have no idea how to get it to proceed to the next step to allow me to perform the restore??
Any suggestions would be greatly appreciated, as I will have no choice but to do a complete reinstall (including all apps and data) if I can't get the backup restored... Thanks!

I had the same problem when installing a new HDD in my Macbook. The solution I found was to reinstall Leopard onto the new HDD from the install CD, then reboot off the install CD once I had done this. I was then able to choose the 'Restore from Time Capsule' option and get my HDD to show up in the window.
A word of warning, once you have reinstalled Leopard and it starts asking you for all you info, as if for the first time to set up your computer, there is an option at the end of that process to restore your data from a Time Capsule backup. While this did restore all my files and so forth, it did not update any of the 'Apple' apps, i.e. iTunes, iPhoto, Quicktime, or the operating system itself, suggesting a 500Mb download via 'Software Update' to update the system. It was faster for me to reboot of the install CD and restore via the process outlines above. That way you get all your system updates included.
Not sure if this is the 'approved' method but it worked for me! The restore process took about 75 minutes for about 100Gb of data from my external backup drive connected to my Macbook via a Firewire cable.
Hope this helps!

Oracle backup & restore problem

Hi Team,
I am new to the RMAN, I want to test Backup & restore operation
I have database called Test , I am creating new table in the database called Test_table through SQL *coPlus create mmand.
Now After this I am taking backup the of all cotrolfile , datafile & snapshot file.
once again I am opening this database in SQL *plus & deleted the table (Test_table).
Now if restore back the database with backup set taken before deleting table. It is not showing me the Test_table.
What is the problem? Plz help..

Hi,
Thanks for replay,
Using Windows XP & ORACLE 9i
I am doing following steps.
Created one table ( Test_table ) in database my Test database.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>rman
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> connect target system/sreedhar@Test;
connected to target database: Test (DBID=1558624384)
RMAN> show all;
using target database controlfile instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'C:\Testing\CTL_
%F';
configuration for DISK channel 2 is ignored
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT 'C:\Testing\DBF_%U';
CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT 'C:\RmanBack\std_%U';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'C:\Testing\CHA_Dev_%U_%S_%P';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\TESTING\SNCFTest.ORA';
RMAN> backup database;
Starting backup at 06-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=9 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\ORADATA\Test\SYSTEM01.DBF
input datafile fno=00002 name=C:\ORACLE\ORADATA\Test\UNDOTBS01.DBF
input datafile fno=00005 name=C:\ORACLE\ORADATA\Test\EXAMPLE01.DBF
input datafile fno=00010 name=C:\ORACLE\ORADATA\Test\XDB01.DBF
input datafile fno=00006 name=C:\ORACLE\ORADATA\Test\INDX01.DBF
input datafile fno=00009 name=C:\ORACLE\ORADATA\Test\USERS01.DBF
input datafile fno=00003 name=C:\ORACLE\ORADATA\Test\CWMLITE01.DBF
input datafile fno=00004 name=C:\ORACLE\ORADATA\Test\DRSYS01.DBF
input datafile fno=00007 name=C:\ORACLE\ORADATA\Test\ODM01.DBF
input datafile fno=00008 name=C:\ORACLE\ORADATA\Test\TOOLS01.DBF
channel ORA_DISK_1: starting piece 1 at 06-OCT-06
channel ORA_DISK_1: finished piece 1 at 06-OCT-06
piece handle=C:\TESTING\DBF_0QHV5L4T_1_1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:05
Finished backup at 06-OCT-06
Starting Control File and SPFILE Autobackup at 06-OCT-06
piece handle=C:\TESTING\CTL_C-1558624384-20061006-01 comment=NONE
Finished Control File and SPFILE Autobackup at 06-OCT-06
RMAN> exit
Recovery Manager complete.
After this backup I am deleting this Test_table table using SQL *PLUS Drop table clause.
Also deleted the all .DBF files from Test folder. and I am restoring now the old backup set which has the information regarding the Test_table.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>rman
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> connect target system/sreedhar@Test;
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 252779340 bytes
Fixed Size 453452 bytes
Variable Size 125829120 bytes
Database Buffers 125829120 bytes
Redo Buffers 667648 bytes
RMAN> show all;
using target database controlfile instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'C:\Testing\CTL_
%F';
configuration for DISK channel 2 is ignored
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT 'C:\Testing\DBF_%U';
CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT 'C:\RmanBack\std_%U';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'C:\Testing\CHA_Dev_%U_%S_%P';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\TESTING\SNCFTest.ORA';
RMAN> restore database;
Starting restore at 06-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to C:\ORACLE\ORADATA\Test\SYSTEM01.DBF
restoring datafile 00002 to C:\ORACLE\ORADATA\Test\UNDOTBS01.DBF
restoring datafile 00003 to C:\ORACLE\ORADATA\Test\CWMLITE01.DBF
restoring datafile 00004 to C:\ORACLE\ORADATA\Test\DRSYS01.DBF
restoring datafile 00005 to C:\ORACLE\ORADATA\Test\EXAMPLE01.DBF
restoring datafile 00006 to C:\ORACLE\ORADATA\Test\INDX01.DBF
restoring datafile 00007 to C:\ORACLE\ORADATA\Test\ODM01.DBF
restoring datafile 00008 to C:\ORACLE\ORADATA\Test\TOOLS01.DBF
restoring datafile 00009 to C:\ORACLE\ORADATA\Test\USERS01.DBF
restoring datafile 00010 to C:\ORACLE\ORADATA\Test\XDB01.DBF
channel ORA_DISK_1: restored backup piece 1
piece handle=C:\TESTING\DBF_0QHV5L4T_1_1 tag=TAG20061006T122500 params=NULL
channel ORA_DISK_1: restore complete
Finished restore at 06-OCT-06
RMAN> recover database;
Starting recover at 06-OCT-06
using channel ORA_DISK_1
starting media recovery
media recovery complete
Finished recover at 06-OCT-06
RMAN> exit
Recovery Manager complete.
When i check table Test_table in SQL *Plus using command DESC Test_table; it is showing me error object Test_table does not exist

E71 Backup/Restore problem after firmware update

after i restore the data using the PC suite, I'm facing a connectivity problem, No MMS and web browsing are working, even after i re-install the settings from the provider and setup wizard, same thing, even the wireless connectivity is not working.
note that they are working be4 i do the restore (plain phone).
any recommendation.
It's never too late to learn ....

I upgraded my firmware (why do nokia call it 'software'?), which i kind of regret now. I don't see any difference to my phone, plus i hit a major problem.
Before upgrading i backed-up my phone.
After upgrading firmware i tried to restore the backup to my phone - wouldn't work!?!?!?!?! - plus the phone said that i had a massive error and had to take my phone back to retailer. it would not restart.
Seriously crazy
FIX:
'Hard-reset' the phone (erases memory and takes you back to basic nokia phone software) - While turning the phone on you hold down 3 buttons: " green-phone & 3 & * ". Hold down for about 10 sec's. The phone should start working again with the new firmware - albeit with only basic settings.
Go to the backup-restore, and restore from your last backup.
HOWEVER, UNTICK 'phone settings'.
This should get almost everything back for you (calendar,contacts,etc), except for any software that you had previously downloaded and installed on your phone (e.g. google maps, fring, skype, youtube, etc). Easy enough to download & install again. Also, you might want to ring your phone company and get them to mms you the configuration settings for internet and mms again.
WHY WAS THERE A PROBLEM? I believe that the old settings of the previous firmware are NOT compatible with the new firmware. This makes the phone effectively stop working when you restore the backup.

What doesn't iTunes backup? Backup\restore resolves network comm problem

What doesn't iTunes backup? An app of mine is having issues with certain communications, and backup/restore resolves issue. Deleting and re-downloading the app doesn't resolve. This isn't acceptable solution, so I want to know what isn't backed up to figure out what is going on.

An interesting scenario. I thought deleting the app deleted everything, not only the app filesystem but NSUserDefaults, associated keychain items, etc. Does it matter whether you delete the app in iTunes or on the device?
Rather than ask what iTunes doesn't backup, start with what is does backup. See iTunes will back up the following information on this page for an extensive list.
http://support.apple.com/kb/HT4946
Also read this if you use iCloud.
http://support.apple.com/kb/HT4859

Problem with backups on Tape

Could you help me ,I have a problem with backups on tape drive .The error which Windows throws is "BackupTapeFile::UnloadTape: PrepareTape(UNLOCK) failure on backup device '\\.\tape0'. Operating system error 21(failed to retrieve text for this error. Reason: 15105)."
Does anyone of you have the same problem.Thank you!

You cannot perform a regular restore/recovery (up to the latest possible point in time), because at this time dropped tablespace is not known to the controlfiles/recocery catalog and therefore not known to RMAN,too. You have to 2 possibilities:
1. Restore the entire database and recover back in time to before the tablespace is dropped.
This will cause ALL data within the database to go back in time, not just this tablespace.
2. Clone the target database to a new location, perform point in time recovery in order to export
the data of the tablespace for import into the original database. This causes the data of this
tablespace to be brought back into the production database, not effecting existing (current) data
in any other area of the database.
As you can see recovering from a dropped tablespace needs some additional efforts. By the way you also cannot use RMAN's TSPITR functionality.
Werner

I have a new SIM/service and want to transfer all my contacts from the current 4S to the new SIM in my old 3GS. I do NOT want to backup/restore the entire phone contents (iTunes or iCloud), JUST the contacts. How?

Current phone 4S with service from one provider. Also have a new SIM with another provider, and want to copy my contacts from the 4S across to my old 3GS which I will be using for a bit as an alternative. Definitely do not want anything except the contacts copied across so a full backup/restore is NOT what I'm after, and I can't see (in the iTunes backup) how to only do the contacts.

Sorry, my bungle - from what devices I am used to - these Apple things still have me confused at times.
The core requirement is the same - to get the contacts from the 4S onto the 3GS without backing up the whole device/apps etc.
And a second part of that is how to get the contacts onto a SIM for a device that DOES store them there. No doubt that will be a problem as it only has name/number combos, not all the fruit the iPhone keeps under a contact. Maybe it can't done. A simple export to CSV or something that could be edited would suffcie if there were an import tool to get it onto the SIM in the simpler format.

Problems with a Restore after trying to resolve problems with Yosemite

Hi there,
I stupidly upgraded my OS to Yosemite without waiting a month or so for any problems to be fixed.
After the upgrade which went really well, or so I thought, all my apps worked, and I was very happy with it until I switched to Bootcamp to to find that I didn't have the option to select Bootcamp as startup. Although I had the BC icon on my Mac desktop, and I could access it from my Mac, I couldn't switch over.
So I did a restore to a timestamp just before my Yosemite upgrade - and this went... sort of well... I panicked when I thought I'd lost all my 10's of thousands of emails but the rebuild went well. The problems I have with my restore are that some of my applications are missing - I just get a '?' in the dock and it tells me what the apps are when I hover my pointer on them. The apps are;
System Preferences
Safari
Preview
Skype
Vox
VLC
uTorrent
Tunnelblick
Quicktime Player
My Pages documents no longer open - it says The required index.xml file is missing but it does manage to show me a quick view in spotlight
I have seen on this forum that this can be due to having more than one version Pages but I can only find one version in Application/iWork '09
I can't see why Safari wouldn't be present because I thought it was part of the operating system, as in Preview as well. I thought that maybe they are still on my Mac but need some sort of reset or something...
My bootcamp problem has been resolved by the way and I can switch to my Windows apps that I use regularly.
So I would really be grateful for help in restoring the apps above. I was thinking that apps I downloaded like Skype and Vox say, I can download again, but maybe I need to delete files etc. before reinstalling these missing ones.
Many thanks, Maz

Hmmm, problem resolved by restoring forward to my Yosemite backup.
It's the lesser of two evils and I have my Windows apps on my old PC...
So come on Apple and get this fixed - it's absolutely disgraceful that this should happen... absolutely disgraceful!
Maz

Erase and sync issues (backup/restore)

Hello.
I have an issue with the backup/restore with my iPhone.
Sometimes, it is difficult to find an answer that fits your problem exactly on the forum! Lots of good stuff though!
This post will be little longer than normal, but I need to get all the facts on the table.
I'll try to keep this brief. Please hear me out!
From another post ...
https://discussions.apple.com/message/12273122
Kwopau stated ...
if you do a restore, you only have 2 options, Restore as new, meaning nothing will go on it
and you will just have to start fresh and no contacts will go in there.
The other option is "Restore from Back up _______" it will completely restore your phone
from your last back up and everything will be on there.
End of quote ...
Here is my situation.
I have a 3g 16GB iPhone.
I am still running IOS 3 (not IOS 4).
I do not use sync. I manually manage the music and books with iTunes.
I have an HP laptop.
A while ago, I had to completely rebuild the computer.
The computer has a new computer and user name (I don't know if this matters in iTune/iPhone matchup)?
I have not been able to connect the iPhone since then.
Let me rephrase that.
I can connect with iTunes. I can see all that is on the iPhone.
When I try to add or delete music or books on the iPhone with iTunes or set the manually manage check box, I get the following message ...
The iPhone "myname's iPhone" is synced with another iTunes library.
Do you want to erase this iPhone and sync with the this iTunes library.
Most commands appear to be grayed out, I can't add or delete anything.
I do not have anything in current iTunes library at the moment.
My fear is this.
If I do the erase and sync as suggested (iPhone message above) to the iPhone and then use the new iTunes library, will I be able to use the backup (I just created) to restore to the iPhone that I just reset?
If so, will it have contacts and all the other stuff?
I can afford to lose the music and books, and perhaps the apps on the iPhone.
I cannot afford to lose my contact list.
I need to find another way to backup the contact list, Outlook, etc?
If there other posts relative to this, please point me to them.
I am afraid to pull the trigger for fear that iTunes will not recognize the iPhone after the erase and sync and then not allow me to restore.
Perhaps someone can put my mind at ease and convince me that it will all be good if I proceed!
Thanks for you time and help in this matter ...
Bob

Do you know how to transfer purchases? Connect the iPad to the PC and launch iTunes. Click on the iPad nema on the left side of the iTunes window to select it. Then go to File>Transfer Purchases. That should put all of your purchased iPad content into the iTunes library on the PC.
Here are instructions in a very short, easy to follow article.
Transfer iTunes Library to a new computer
This discussion will be helpful to show you how to make the PC work wTunes from the iPad.
https://discussions.apple.com/thread/3305461
This is the discussion from which I borrowed the some of the text in my post from the discussion above.
https://discussions.apple.com/message/11527071#11527071
What puzzles me is that if you had updated with the PC, I would have thought that you would have backed up and synced with that PC as well, but read the articles and instructions and post back with questions.
You can email the pdf files to the iPad, or use iOS file sharing, and open and save them in iBooks or another pdf reader app, but start with getting your stuff onto the PC.

Content missing and problems with resync / restore functions

Since this morning (it's early evening now), my iPod touch (3G, 64 GB, updated to iOS4 as soon as it was possible from Spain) is not working properly. It started while playing some music. It suddenly stopped without having to. I checked that the ipod was ignoring some songs, whose artwork appeared on screen, as if it couldn't find them. It jumped from one song to the next, and if it couldn't play it either, it stopped.
After a little investigation, I reached the "Settings -> Information" section, where I saw that, although the ipod said it had 4000+ songs loaded, it had more than 50 Gigabytes free, which was impossible, since it was slightly more than 32 GBs free the last time I sync'ed it, and the songs in my library weight about 25 GBs.
Once I arrived home, I tried to resync it, and then iTunes showed that most of the pod was empty and tried to reload all music, but it stopped due to an error after some 200 songs.
Then I tried to restore the ipod, but after a few minutes iTunes displayed an error again.
I'm trying now to resync it again. The process of reloading the songs is being painfully slow. It takes more or less 10 seconds for each song.
Can anyone wonder what migt be happening?
I bouht the ipod in March so it is under guarantee, but I'm going to start my summer holidays this week and I would hate to spend them without the ipod until Apple Services repairs/replaces my iPod.
Thanks in advance for your help.
Message was edited by: gwydno
Message was edited by: gwydno

Hmmm, problem resolved by restoring forward to my Yosemite backup.
It's the lesser of two evils and I have my Windows apps on my old PC...
So come on Apple and get this fixed - it's absolutely disgraceful that this should happen... absolutely disgraceful!
Maz

Facing a major problem while performing restoration of my mssql DB

Dear Experts,
I am facing a major problem while performing restoration of my mssql DB. The situation is like
1. I have successfully take full and transactional log backup in a external device using MSSQL Server Managemnt Studio.
Backup was successfully completed as per MSSQL Server Managemnt Studio message.
2. Try to restore the same using MSSQL Server Managemnt Studio. It is showing the following error
System.Data.SqlClient.SqlError: RESTORE cannot process database <DB_SID> because
it is in use by this session. It is recommended that the master database be used when
performing this operation.
I have followed the guidelines specified in the link
[SAP Help Link for Restoring the <SAPSID> Backup from a Device |http://help.sap.com/saphelp_nw70/helpdata/en/f2/31ad56810c11d288ec0000e8200722/frameset.htm]
But everytime I am getting the same error message. I have checked with all options but there
was no resolutions. Kindly advise me in this regard.
Thanks and Regards,
Partha

http://social.msdn.microsoft.com/Forums/en-CA/sqltools/thread/37ee8e24-7aaa-472b-861a-fc0cc513338a
hope it helps

Backup/Restore for my demo database

Howdy all. I am running Oracle 10g Standard Edition on Windows 2K Server. I have the following situation ...
I would like to make a standard demo database for my company. This database would be put on several machines and used by sales people to demo our software to possible customers. I need to be able to restore this database on a machine with Oracle 10g installed and then run our software on it.
I can make the database and run our software on it just fine on my machine. I am, however running into problems when trying to learn how Oracle and RMAN work with backups and restoring those backups. I am coming from the MSSQL2K environment where backup/restore is fairly simple and straightforward.
Will somebody please give me a basic idea of what I need to do in order to take the database on my machine and back it up and then restore it on another machine. I don't want to have the restore depend on a given file/directory structure. Our software depends on two tablespaces in the Oracle database. So, if it is easier to somehow backup the two tablespaces and restore them than it is to backup the entire database and restore it - then that is great. I will do it that way.
I am basically looking for the simplest approach for restoring this demo database wherever I want to quickly. Any help would be greatly appreciated.
wally

Jeffrey, here's what I use to do this, I have a production database that on occassion I need to make a copy of to perform some testing on, so I just use this to create an "auxiliary" database using the RMAN backups from the production database. I thought in 10g there was a database clone function, I'll have to look that up and get back to you, anyway, here's the instructions I use.
Target Database = RMAN Target (Source database to be copied.)
Auxiliary Database = RMAN Auxiliary (Duplicated database end result)
1. Copy the target databaseâs init.ora file to the auxiliary databaseâs location.
2. Modify disk locations for control files, archive logs and dump dests in init.ora if required
3. Create locations for data files, dump dests, control files and log files
4. Copy RMAN backup files and archive logs to same location on auxiliary DB server as they are on target DB server
5. Create Oracle Service using ORADIM utility
6. Start instance in nomount
7. Create listener.ora entry on auxiliary server
8. Create tnsnames.ora entry on target server
9. Connect to rman catalog, target and auxiliary from the target server:
     RMAN> connect catalog rman/<password>@<catalog db>
     RMAN> connect target sys/<password>@<target db>
     RMAN> connect auxiliary sys/<password>@<auxiliary db>
10. Run the following (modify the sequence count and datafile renames as required.)
run{
allocate auxiliary channel d1 type disk;
set newname for datafile 1 to 'e:\ORACLE\ORADATA\MTSD\SYSTEM01.DBF';
set newname for datafile 2 to 'e:\ORACLE\ORADATA\MTSD\RBS01.DBF';
set newname for datafile 3 to 'e:\ORACLE\ORADATA\MTSD\USERS01.DBF';
set newname for datafile 4 to 'e:\ORACLE\ORADATA\MTSD\TEMP01.DBF';
set newname for datafile 5 to 'e:\ORACLE\ORADATA\MTSD\TOOLS01.DBF';
set newname for datafile 6 to 'e:\ORACLE\ORADATA\MTSD\INDX01.DBF';
set newname for datafile 7 to 'e:\ORACLE\ORADATA\MTSD\SMDBDATA.DBF';
set newname for datafile 8 to 'e:\ORACLE\ORADATA\MTSD\SMDBIDX.DBF';
set newname for datafile 9 to 'e:\ORACLE\ORADATA\MTSD\SMDBTEMP.DBF';
set newname for datafile 10 to 'e:\ORACLE\ORADATA\MTSD\AUDITDATA.ORA';
set newname for datafile 11 to 'e:\ORACLE\ORADATA\MTSD\AUDITAR.ORA';
duplicate target database to mtsd
logfile
'e:\oracle\oradata\mtsd\redo01.log' size 10M,
'e:\oracle\oradata\mtsd\redo02.log' size 10M,
'e:\oracle\oradata\mtsd\redo03.log' size 10M,
'e:\oracle\oradata\mtsd\redo04.log' size 10M;}

Backup/restore a system that has 2 OS installed

Hello Guys
I have 2 OS –both are windows XP- installed on a machine on 2 different partitions
Using Rescue and Recovery, I created a backup inside OS number 1,
I tried to restore the backup, but unfortunately, Rescue and Recovery restored only one OS(and didn’t restore the second OS)
So my question is: how can I backup/restore a system that has 2 OS installed
Thanks

Dear Sir
I am a graduate in computer science engineering .For
the past few months I had training in java. There is
serious doubt that has arisen & no body in my contact
has the answer for it.Sounds interesting.
My doubt is that can JVM be installed in a system that
has only OS- DOSOS-DOS ? Is that a variant on the microsoft DOS (like e.g. DrDOS).
1)     If yes then
?     Why cant sun Microsystems starts developing a well
secure OS on that base like Microsoft did.They did, only microsoft failed and Sun worked it out nicely with Solaris (aka SunOS) which is a UNIX variant (which DOS isn't).
?     Can applet be run (or developed) in a purely DOS
based systemYou can develop them, just not run or compile them ;-)
>
2)     If not then
?     Why java is said to be platform independent.Because it is, the specs are out there, you're free to write a JVM for DOS (I'd suggest version 6.22).
Hope that my simple doubts will be cleared through tech personals.If those are doubts about a language I'd see you need to straighten out your prioritiets.
Tech personals? Are those personal advertisements for technical dating or something?
>
Thanking you
Yours sincerely
Sajeev varghese
([email protected])
No problem.
p.s. to other guy that posted that IBM wrote MsDOS (aka DOS, the most widely spread version, which I'm assuming we're talking about), no they didn't, microsoft did, that's where Bill Gates got his money with.
IBM had it's own variant and was pushing the PC hardware market (the ancestors of our pc's were either IBM or IBM compatible).

Problem of backup/restore

Similar Messages

Maybe you are looking for