Problem of black screen with MSI gtx570 twin frozr 3

I have a problem that will seriously hurt me...(gtx 570 twin frozer 3)
psu:680green
cpu:1055t oc
mb:ta 890 fxe
ram:crosair 4 gb 1600
my problem just in game with support dx11
dx9 very well and no problem
for example:
crysis 2 dx11
homefront dx11
bc 2 dx11
deus ex dx11
all game with support directx 11 and Only 5 seconds of the game comes out and starts again after a few seconds without any problems
Friends please help me to resolve my issue I think.
I do not know the English language well,sorry
Thanks to all.

Try increasing your core voltage using msi afterburner. My card personally is stable at 0.9750mv and some users are stable at 0.9880mv. Good luck mate!

Similar Messages

MSI GTX570 Twin Frozr II OC - How to make fans run at 100%?

Hello!
I have a SLI setup with 2xMSI GTX570 Twin Frozr II OC. The Afterburner let's me adjust fan speed to 85% max. I would like to set it to 100% 'cuase my system tends to heat up considerably. Is there a way to do that?
Thanks!

Quote from: Yautja Hunter on 09-April-11, 16:55:27
If I have ony 1 card installed, then it idles below 40 degrees, and heats up to about 70 degress under heavy load (Kombustor GPU burn-in test) with fan set to Auto.
When both cards are installed is SLI mode, they idle at 50 and 45 degrees respectfully (GPU 51Mhz, Mem 135Mhz), heating up to 97-98 and 87 respectfully (GPU 750Mhz, Mem 2000Mhz) under heavy load (Kombustor GPU xtreme burn-in test). At 97 degrees the card starts to throttle to avoid overheating. The fans at both cards operate at maximum speed.
Interestingly enough, even with the case side door removed the first card still hits 97 degrees. I believe being so close to each other in SLI mode they just can't adequatle cool each other because of the heat produced. Right now they are installed in PCI-E x16 Slot 1 and PCI-E x16 Slot 2. I tried installing one of the cards to PCI-E Slot 3 to make a gap between them for better cooling, but in this config they don't run in SLI for some reason, and I still would have to place my Creative sound card between them.
Anyway, here are a few photos of my setup for you to better understand:
http://yautja.headphones.ru/SLI_1.JPG
http://yautja.headphones.ru/SLI_2.JPG
http://yautja.headphones.ru/SLI_3.JPG
My system description is below in the signature. The cards run at their factory speeds of 750/2000. Voltage is 0.988V and 0.975V respectfully.
i see
images 2 and 3 can't be opened.
Try do this:
Go for latest drivers as well 270.51 ==> http://www.geforce.com/#/Drivers/Results/29331
which makes major difference compared to any others before
Clean old drivers with Driver Sweeper 1st, in "Safe Mode"
http://phyxion.net/Driver-Sweeper/Driver-Sweeper/
then reboot and boot to normal mode and install 270.51

Random freeze on boot with MSI R7870 Twin Frozr 2GD5/OC PCIe

Hello everyone,
I have an issue with my MSI R7870 Twin Frozr 2GD5/OC PCIe graphics card. Sometimes, on boot (before getting to BIOS, I guess during GFX BIOS, if that's a thing anymore in the computing world) the GPU fans will spin at a considerable speed (noisy, I'd say 70-100%) and the system will refuse to boot. I could reproduce this around 5 to 6 times, and always during cold boots. After this happens, rebooting or powering off and on will not work, I'll need to cut off all power (PSU switch) and cold-boot again.
Any ideas?
Thanks a lot!

can you list full system specifications? read >>Posting Guide<<

Black screen with MSI 270X R9 Hawk

Hi,
I have MSI 270X R9 Hawk and lit yesterday and suddenly your computer when you are loading windos screen stays black, I have not done any upgrade and illustrates this by default.
S / N: 602 v303-11SB1401008371
Any solution? A Someone has happened?

I tested on a PC with Windows 8.1 and still fails.
The PC is this:
https://docs.google.com/file/d/0B1_yaqEGCgIUVlVScV81d0dic0k/edit
The integrated graphics works OK.
An old PCI graphic works OK
MSI 270X R9 Hawk starts well and when you start windows fails
Windows 8.1 safe mode OK.
I saved the bios of the graph with ATIFlash
https://drive.google.com/file/d/0B1_yaqEGCgIUcHNBdGR4XzZHNnM/edit?usp=sharing
I leave a video of windows in safe mode and restarting the computer.
https://drive.google.com/file/d/0B1_yaqEGCgIUWGdaRWpyV3BiejQ/edit?usp=sharing
I need help

MSI 7870 TF 2GD5/OC black screen with sound loop

hello,
Im getting the black screen with sound loop during the gaming. i have to shut down pc.
in win log is no info about problem, just that the win was not shuted down correctly..
no matter whats type of game, sometimes after 15 minutest sometimes after 4 hours.
no matter on card temperature.
tried reinstall windows, tested on all driver versions for 7870 from amd, but still same...
found an article about this
http://w w w .behardware.com/news/12705/black-screens-and-radeon-hd7870-a-solution.html
now the card is in RMA

Then ask MSI: >>How to contact MSI.<<
This is a Users-to-Users Forum

When I click to open a photo it opens a black screen with a grey triangle, exclamation mark in the middle. How do I fix this problem?

When I click to open a photo it opens a black screen with a grey triangle, exclamation mark in the middle. How do I fix this problem?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

HT4623 I phone 5 failed to open up, black screen with apple logo only. Is this a software problem or change the battery?

My Iphone 5 originally came from Japan. Being resident of the Phil., I let a Technician open it by using x-sim. But now, the maximim charging is up to 3 minutes only. Later on it goes down to 1 minute until it stopped opening up. Only black screen with an apple logo appearing sometimes when plugged to power outlet. Tried to press the power on, but it still wont open.
What might be the caise of all this. Is this a software or hardware problem? Or is it the battery that the technician suggested?

johnbrave wrote:
{snip}
. . . What might be the caise of all this.
johnbrave wrote:
I let a Technician open it. . . {snip}
When you answer your own question, you don't really need to post it in a support community. Go to the technician and seek your solution there. Apple can do nothing for you after unauthorized service.

HT201412 My iphone 4 has a black screen with the itunes musical note logo. Below this a USB plug in with an arrow pointing up. It will do nothing else. What can I do to fix this problem?

Header 1
Header 2
My iphone4 has a black screen with the itunes logo. Below that is a USB port image with an arrow pointing up. The phone will do nothing else. How can I fix this problem?

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

I have iphoto previously installed. running but when i have synced my iphone4 the iphoto app. cant be launched anymore. a black screen with the hourglass running till it quits automatically. What should be the problem???o

i have iphoto previously installed. running but when i have synced my iphone4 the iphoto app. cant be launched anymore. a black screen with the hourglass running till it quits automatically. What should be the problem???

Try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home/() Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Click to view full size
OT

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I'm sorry to learn that your phone is having problems starting up, marinema08. I'm sorry if this is incorrect, but are you using the original HTC Droid Incredible or a later Droid Incredible model? Please try placing your phone in Safe Mode to see if you are able to move past the Droid eye. http://vz.to/1kdQWVI If you are able to enable Safe Mode, please try deleting any recent applications you have added.
AndreaS_VZW
Follow us on Twitter @VZWSupport

MSI H77MA-G43 - Windows XP, black screen with A3 code

Hi,
I've just bought mb MSI H77MA-G43 and samsung SSD830 series.
I have Windows XP.
I had to have set Sata mode to IDE beforee installing XP because Windows didn't see ssd.
Now it's ok but PC starts slowly. When I press power on button there is a black screen with A3 code and it takes some times(about 1-2 minutes) and next the Windows start normally.
What should I do to fix this issue?
Thanks for replies.

Quote from: Jack on 22-April-12, 20:22:25
If you want to install XP in AHCI mode you need to integrate the Intel AHCI drivers into an XP installation disk (with NLITE or XP ISO Driver) or load the drivers from a floppy disk during setup (Windows XP Setup only supports floppy drives/disks for that task, unfortunately).
I know that, I integrated drivers: "Intel Rapid Storage Technology Floppy Driver for 7x series" from that link http://www.msi.com/product/mb/H77MA-G43.html#/?div=Driver&os=XP%2032 but it didn't help. SSD was still undetected, so I change SATA mode to IDE to install XP.

MSI Z87 GD65 - Hangs on black screen with 9C at bottom right

Pretty much what the title says, 'MSI Z87 GD65 - Hangs on black screen with 9C at bottom right'. Does anyone have any idea why it does this? It hangs for a while before eventually continuing with the start-up, this is most frustrating when I have an SSD and want a quick start-up. I have already looked it up in the manual to no luck. Help?

9C last for me like 1 to 3s, depending on the amount of USB devices attached. If I have only USB printer, keyboard, and mouse attached, it shows for roughly less than 1.5s.

MSI R6950 Twin Frozr II Radeon HD 6950 not filling screen

hi, i have a custom computer with a MSI R6950 Twin Frozr II Radeon HD 6950. when using said card with my 23'' Samsung sync master SA550 there is about 3/4in of black outside of the screen that is not being filled. it is not the monitor as i have tried it on 2 others and had the same problem. I am using an HDMI connection. i feel like it might be a driver problem or something but I've tried everything I can think of with no luck...... any help you could give me would be great, thanks.

Quote from: lloydwt on 02-January-12, 04:02:41
...then go into the AMD Vision Engine Control Centre along the left hand side, look for "My Digital Flat-Panels" click this and in the new options find "Scaling Options (Digital Flat-Panel)", move the slider right till it says 0% and this should fix the issue. Good luck!

GS70 - Does not boot - black screen with solid white dash

Sorry for the long post - I've been beating my head against this problem all day, filed a report ticket and really need help from anyone who has ideas.
Yesterday evening after finally relenting and allowing the patch Tuesday updates to install on my GS70 Stealth I tried to power on my computer and it remained stuck at the MSI logo. I waited 3 hours with no success before powering it off and attempting to access the bios by hitting the delete button. The screen turned black except for one non-blinking white dash near the center of the screen. This screen also remains indefinitely and requires a hardware power off to work. I've tried all of the function key presses and recovery shortcuts to no avail.
Eventually I tried to boot into linux via a live USB. I still could not access the bios but, to my surprise, so long as this USB is in my system, Windows happily boots. After this I tried to revert to a system restore point before the updates but that did not resolve the problem. I also tried to update the BIOS but there is no way to install BIOS updates that I know of that doesn't require accessing the old BIOS first (which I cannot do because the black screen with a white dash is still all that shows up). I tried forcing the UEFI bios to load through windows recovery settings with no luck either.
I've sent in an RMA/Support request and hopefully MSI will repair or replace my device but I sent it in for an RMA literally less than two months ago and to be having to do it again so soon is starting to turn me off of the product. For me to insure and ship my device to MSI costs a little over $100 each time which is rapidly turning this $1600 product into an $1800 one and turning me from an MSI brand loyalist to a 'one-star-review everywhere' evangelist. Is it possible that something MSI did during the last RMA screwed up my motherboard (they replaced the disfunctional steel series keyboard with a new marginally more functional steel series keyboard)? Does MSI ever cover the shipping costs for an RMA if the RMA is a result of damage that they caused to the device? Is there anything I should do to try to avoid burning more money trying to get a luxury-priced product I've already paid for to function?

i had similar problem myself on my first GS70 it has some sort of bios problem that it random hangs itself :/ causes OS not to boot and bios refuses to load but i managed to get my recovery USB to boot but not bios yet so i sent laptop off for repair they replaced the motherboard so i got it back then i had an faulty gpu :/ so i took it back and got money back so i bought new one some where else since than i havent had problem so this sort of problem sounds like bios firmware isnt booting propertly :/ so have you tried removing msata and HDD from laptop and then power laptop on? to see if bios gets forced on if so power it off put msata back on and so then power laptop back on and bios shall work again

Problem of black screen with MSI gtx570 twin frozr 3

Similar Messages

Maybe you are looking for