Problem of Creating Multiple Communication channels for multiple files
Hi Everybody
I have a very basic doubt but this struck me...
For a file-XI-file scenario,if multiple files are coming from same FTP server but with different names then we have to create multiple communication channels for all the files of different names..but is this a intelligent approach?Can we do something so that only one communication channel can receive multiple files of different names?plz explain in detail if possible ASAP.
I have another doubt as in File-XI-File scenario how the XI understands that a particular file is from this FTP server needs to be send to another particular FTP Server?is it only the name of the file which we give in sender comm channel & receiver comm chaneel which determines this????that means this name should always be same?plz explain in detail if anybody knows?
Thanks Aamir.I understood the solution.
Correct me if I am wrong.......
1)If there are multiple files with different names & different extensions in the sender FTP then we use-->
2)if there are multiple files with different names & different extensions in sender FTP & I want only say files of 2 extension types(say .xml & .txt)then we use-->
*.xml
in one comm channel &
*.txt
in another comm channel rite??
Also I wanted to ask that only two kinda files we can pick up through sender comm channel rite?
.xml and .txt(File content Conversion).Can we pick files of other extensions also?(say .doc,.xls)If we use as u said
then files of all other extensions will also be picked up rite?bt hw will xi convert them into xml?plz explain......
One of my other q is not answered yet.........all these same doubts are there for receiver communication channel.......but you all have not said nething abt the receiver comm channel........plz explain the answers to all these queries for receiver comm channel for a receiver FTP........ASAP......thanks once again.......
Similar Messages
-
Party communication channel for multiple stores with multiple user id and passwords in sap pi
Hi Exeperts,
I have a scenario proxy to SAOP . where i am sending some information from my stores to third party company with single user id and password in communication channel.
but requirement is changed now i have 20 stores with 20 user id and password for communication channel.how can i achieve this requirement?
Can i create 20 communication channels for 20 stores or can handle through the party based communication ?
Please help us achieve the requirement.
Regards
Ravinder.sHi,
In the SOAP Receiver adapter, you can only store 10 userid/password combinations via Authorization Keys. These are called via Dynamic Configuration via technical name TAuthKey. In your case, for it to work, you need:
1. 2 business components/2 SOAP receiver communication channels.
2. 1 receiver determination with xPath for username to determine correct business component
3. 1 interface determination
4. 2 receiver agreements (one for each cc)
Hope this helps,
Mark -
Problem in creating new communication channel template in IR
Hi experts,
I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
Then the following error occurs:
STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
So can anybody help me. Thanks for your help.
Best regards.
MarioHi Mario,
This is genral problem appearing in PI 7.0 with SP12.
Previously, i have the same problem.
i.e STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
Regarding this we raise an OSS note SAP people.
they gave the suggestion that update with SP13.
i discuss with basis team and install the SP13.
now the problem is solved, i can able to create the Communication Channel Template.
Please award points, if it really help to u
Regards
Mahesh. -
Multiple communication channels for file adapter based on user name
I am using this Idoc-to-File scenario, using FTP for sending the files to file server. Target directory is determined by user id which is unique for a field called ASC. Field ASC is a part of incoming Idoc. There are 40 ASC; that means I have 40 user ids/password. Is there way of creating a file communication channel where user id/password can be supplied dynamically. Or there is an alternative to creating 40 different channels, one for each ASC.
Thanks,
DehraHi,
you need to create 40 channels if you have users
as dynamically you can only create:
File Name
Directory
File Type
File Encoding
Temporary Name Scheme for Target File Name
with FTP adapter
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Can we creat an Apple ID for multiple users?
I work for a company where we are rolling out iPads in big amounts. The problem is that they all need an Apple ID in the training they get about the iPad they receive because they have to install MobiControl on it.
It's no problem to let them create an Apple ID at home, but they have to fill in credit card numbers once they connect at work when they try to install apps. That's the problem... Not everyone want's or has credit cards...
Maybe it's possible to create an Apple ID for multiple users???
Thanks!iPad in Business and Education
You may find a better answer in this part of the forum, since it's meant for situations like you're in.
http://www.apple.com/support/appleid/
is also info about apple ID's.
You can make apple ID's without a credit card, you just have to jump through a couple of hoops to do it since the default is that people will always give a credit card. The key to making an ID without a credit card is that you try to download a free app first, then follow the 'make an ID' prompt. That will get you the 'none' option for payment. -
How to create one inbound delivery for multiple purchase order?
Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU? -
Pls help me to create SO using BDC for multiple line items (VA01)
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.LokeshIf u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra -
AE: multiple Communication Channel instances and message re-sending
Hi All,
My scenario is as follows:
We are running the adapter engine on a server cluster. In the RWB, I have multiple instances of the Communication Channels, for theit various cluster nodes.
My question is:
I have a message in the RWB, which is in System Error state in the AE. If I resend this message from the RWB, does it get queued for the same communication channel instance (as last time, when it failed), or can it get assigned to a new instance?
Hope my question is clear.
Regards,
Puloma.Hi,
I realized that, a message will always be handled by the same instance of the Communication Channel.
But Exception is when an instance is down. In this case the dispatcher will immediately schedule this message for another instance.
In our scenario, all the instances of the Communication Channel were down, and all the messages were in System Error state, with the error: "Channel not initialized."
In this case, if the message is resent, will it go to the same instance, or to a different instance?
Regards,
Puloma. -
Wrong payer value while creating PRO FORMA invoice for multiple delivery
Hi experts,
I am trying to create PRO FORMA Invoice for multiple deliveries thru VF01.
The problem here is the payer value is copied as the value of payer for the first delivery to all invoices. All other fields are picked up properly.
Please help me to idenify the problem. Also if I create the invoices thru VF04 the invoices the created with correct payer.
Thanks in advance.Hi Ankur,
Thanx for the input.
Right now we have customized routine 909 for header level and std. routine 004 for item level.
Code for routine 909 is
FORM BEDINGUNG_PRUEFEN_909.
SY-SUBRC = 0.
Fakturasperre
IF LIKP-FAKSK NE SPACE.
SELECT SINGLE * FROM TVFSP WHERE FAKSP = LIKP-FAKSK
AND FKART = TVFK-FKART.
IF SY-SUBRC = 0.
PERFORM VBFS_HINZUFUEGEN USING '000000' '014' SPACE SPACE SPACE.
SY-SUBRC = 4.
EXIT.
ENDIF.
SY-SUBRC = 0.
ENDIF.
break-point.
SELECT * FROM VBFA WHERE VBELV = LIKP-VBELN.
IF VBFA-VBTYP_N = 'U' .
PERFORM VBFS_HINZUFUEGEN USING '000000' '148' LIKP-VBELN
SPACE SPACE.
SY-SUBRC = 4.
Insert + Unicode/Upgrade Project
STOP.
LEAVE SCREEN.
Insert - Unicode/Upgrade Project
ENDIF.
ENDSELECT.
ENDFORM.
can u please check n confirm if the wrong value is coming due to this code?
Thank in advance. -
How to create a single login for multiple apps on tomcat server?
Hello,
I am running the most recent versions of apache and tomcat on several dells with XP pro.
When I login to an app I have created, a session variable is set, but when I browse to one of the other apps on the same computer, it does not recognize that the session variable has been set and I have to login again.
Can somebody please suggest how, or where I can find docs, to configure tomcat to pass the session variables to other apps?
Thank you very much.
Or, can anybody suggest the most effective strategy for creating single-logon functionality for multiple apps with tomcat and apache running on one computer? and with tomcat and apache running on multiple computers? (i.e., each computer has tomcat and apache integrated).
The database is Oracle 10g running on each computer.
Thank you again.A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded" -
HOW TO CREATE A SINGLE CONTRACT FOR MULTIPLE CUSTOMERS IN CRM
Hi ,
I am working in CRM contract management. my requirement is to create a sigle contract for multiple business partners. can anyone help in providing the steps.
thanks!
chandra.Hi,
I tried this solution earlier by adding multiple BPs in the partner tab of the contract having this partner function.
for ex: the partner function 000001 for sold-to-party in partner tab. i tried to select the same partner function for multiple BPs but system gives an error "too many sold-to-party entered Remove an entry". can you help me here. thanks!
Regards,
chandra. -
How Can I Create One Entry Sheet For Multiple Line Items of A PO
Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO
hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi -
Can one create a smart playlist for multiple podcasts and to...
Can one create a smart playlist for multiple podcasts and to play one after the other on your iPod? I want to combine podcasts of the same topic in a smart playlist. When I tried to do this I chose smart playlist, album starts with, and then did it again for each podcast I wanted. That didn't work. If it can be done how do you do it?
I have a fifth generation iPod which is always updated to the latest as well as the itunes.Say for example I want to put different car related podcasts in one smart playlist. Car related podcasts such as Wall Street Journal Car Cast and NPR Car Talk. Can it be done and if so how?
-
HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY
Hi Experts,
I need generate the service for sender soap communication channel for target url to receive the inbound proxy.
my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method .
i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
how to generate the url for this and what is the transaction code .
Please help us.
Regards
Ravinder.SHi Ravinder,
Q.my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method.
SOAP to Poxy in this case.
For sender SOAP system, we can generate the WSDL link in ID part.
for Reveiver proxy give the integration engine URL.
http://IP:PORT/sap/xi/engine?type=entry
how to generate the url for this and what is the transaction code
There is no transaction code for generating the URL.
i hope this will help.
Regards,
Kesava. -
Problem in creating excel J2EE module for file adapter
Hi All,
I have created an J2EE project for Excel File Reading and added all the required libraries , build an ear of it and also referenced libraries in j2ee.engine.xml of ear , deployed the ear in J2ee engine of XI . Now i am trying to use this module in communication sender channel like this
localejbs/ExcelFileAdapter
ExcelFileAdapter(JNDI Name)
I am using this module name before callsapadapter but nothing is happening , my excel file not getting picked up from the desired location. Can someone tell me where i did things wrong.
Thanx in Advance,
TraxThats part of my bean class code:
public ModuleData process(
ModuleContext mc,
ModuleData imd)
throws ModuleException {
Object obj = null;
Message msg = null;
String msgType = null;
String nameSpace = null;
try {
obj = imd.getPrincipalData();
msg = (Message) obj;
msgType = (String) mc.getContextData("msgType");
nameSpace = (String) mc.getContextData("nameSpace");
if (msg.getMessageDirection()== MessageDirection.INBOUND)
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
else
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.OUTBOUND);
XMLPayload xp = msg.getDocument();
Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"AO: Now got the xml payload object.");
I think their is a some problem before 1st audit message is logged.
Maybe you are looking for
-
Userexit for extended idoc for std. idoc WMMBID02 for T.Code MB1A & MB1B
Hi, Which userexit we have to use to populate values in to extended idoc fields of the standard inbound idoc WMMBID02? Pls share ur experience. Thanks & Regards, Balaji
-
Sub-reports displaying parameter prompt
I have a CR XI r2 application using the JRC that displays a list of reports and allows a user to select the desired report. I then programatically determine the paramaters needed and set the values required. This works fine except when I use a repor
-
Error while writing to file using UTL_FILE
I've created below mentioned directory object and also granted the user appdevnew the appropriate previleges under SYSTEM user. Before giving this command, i've manually created the folder in c drive and created myspool.log file manually. Is it neede
-
MacBook Pro - Loads of problems
Hey, I've been using Macs since 1984 without issues, more recently using 17" PowerBook. Now I've updated to the Intel MacBook Pro and I have got nothing but problems, first on a MacBook Pro 17" Core Duo and now and even worse on MacBook Pro 17" Core
-
Simple select query - Row ordering issue
Hi Guys, I want to ask that row chaining and row migration is applicable for Global Temporary Table as well? Or is it something related only to Physical DB tables? I have requirement as - DB Table --> populate GTT_First(process on this) --> Populate