Problem of MuVo2 FM auto st

Hello,
Why my MuVo2 FM 5G auto started when plug in the AC apdater or insert the battery, without press the start button? Is it a bug? Thanks !

HarryWong,
It's normal and there's nothing wrong with this. It happen on mine too.
JasonMessage Edited by Jason-CL on 03-8-2005 07:3 AM

Similar Messages

Problem with Muvo2 FM 5.

I'm having a problem with my Muvo2 FM mp3 player.. First when i tried to change songs, it showed "playback error" After i switched it off and switched it on, it took a long time to load at the "CREATIVE" "welcome note" and i finally got to the recovery mode automatically.. over there whichever option i select, either "connect to pc" or "format" or "run pc scandisk" neither of it worked.. it will state Media Error.. What's the problem with my mp3 player? Please help me..

I have the same problem as you do. The player always goes to the recovery mode, and whichever option I choose, it only shows "Media Error". When I connect the player to my pc, my computer cannot detect it.
Well, I just bought the player yesterday, and I'm going for an exchange.... Hope the new one doesn't have the same problem.Message Edited by wonghei on 0-25-2005 0:08 PM

Problem With MuVo2

How come when I start my MuVo2 FM the loading playlist thing don't appear anymore? it just goes straight to the song I was playing before i switched it off. It's a bit freaky. But when i take out the battery and puts it in, the MuVo2 FM and loading playlist will appear on the screen thing. And when i switch it off then switch it on again, it will still go to the song straight without showing the MuVo2 FM and loading playlist. Can anyone tell me what's wrong with it's

Deadmunki wrote:
How come when I start my MuVo2 FM the loading playlist thing don't appear anymore? it just goes straight to the song I was playing before i switched it off. It's a bit freaky. But when i take out the battery and puts it in, the MuVo2 FM and loading playlist will appear on the screen thing. And when i switch it off then switch it on again, it will still go to the song straight without showing the MuVo2 FM and loading playlist. Can anyone tell me what's wrong with it's
As SSR explained, that's normal nothing freaky about it. With the standby, it lets you startup the player faster without having to wait for the player to loadup long. The standby time are standard and auto and there's nothing in setting you can change there. Btw, the screen is showing Loading Music not Loading Playlist.

Problem in document number auto generation

Dear All,
       I have created a screen in this screen,i want to generate a auto generate number
      for that i have write a code but when am executing the program in VS2005,the form was loaded in SAPB1 2005,But am not getting the auto generate number in the particular coloumn.
It shows an error like pbject reference not set to an instance of an object
the code is,
    Private Sub DCNumber()
        Try
            oForm = SBO_Application.Forms.Item("FormEditor")
            Dim oRs As SAPbobsCOM.Recordset
            oRs = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            oRs.DoQuery("Select DocNum IS NULL THEN '1' ELSE DocNum+1 from @SCDC")
            Dim Auto As String = oRs.Fields.Item(0).Value
            oForm.Freeze(True)
            oForm.Items.Item("25").Specific.Value = Auto
            oForm.Freeze(False)
        Catch ex As Exception
            SBO_Application.StatusBar.SetText(ex.Message)
        End Try
    End Sub
I call this function in,
Public Sub New()
        MyBase.New()
        SetApplication()
        ' Load the Tab Order form
        LoadFromXML("SCDC.srf")
        oForm = SBO_Application.Forms.Item("FormEditor")
        oForm.Visible = True
DCNumber()
    End Sub

You could use Aslam's answer but then in one row and use it in a formatted search..
select ISNULL(MAX(DocNum),0) +1 from @SCDC
I think the error is in this line:
Dim oRs As SAPbobsCOM.Recordset
oRs = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
Should be:
Dim oRs As SAPbobsCOM.Recordset
oRs = (SAPbobsCOM.Recordset) ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
Or in:
Dim Auto As String = oRs.Fields.Item(0).Value
Dim Auto As String = oRs.Fields.Item(0).Value.ToString()
But you can set a breakpoint and debug your code, then it's possible to see where is trown the error..
HTH
Regards Teun
Edited by: Teun Aben on Apr 15, 2009 10:42 PM

Mail Problems- Sending mail and auto check not working

I am trying to connect to my schools exchange mail server over imap and can no longer seem to send out mail, it tells me it cannot send from the designated server. This seems to have been a problem since I upgraded to tiger a few months ago. Also more recently, although I have mail to check every 5 minutes it does not seem to be checking any of my accounts unless i manually click get mail. This problem is brand new and i haven't any idea what could casue that or what to fix. Any suggestions to either fix would be a great help

Just some port changes

Problem with ACR 7 auto tone?

Still trying to get a handle on this beast, playing with various controls. Here's a snapshot with default settings and then after auto is invoked. Default appears ok, just a small bit of clipping, but unless I'm missing something something is wrong with auto.
Richard Southworth

'Auto Tone' is simply not good enough to bother using, IMO. (not a big deal for me, since I prefer to "manual" tone anyway, still...).
PS - I have seen this over-darkening behavior in the past which I believed was due to a single overextended channel, which for reasons I don't understand, was not shown in the Lightroom histogram, but you can see it in the histogram of the Mfr. software.
Rob

Problem with Date & Time Auto Update

Hi everyone,
I have been experiencing a date & time issue with my MacBook Air. (I am running 10.5.5 with all the latest software updates except for iTunes 8). Here's what's going on:
Under the Date & Time preferences, whenever I try to check the box for "Set date & time automatically", the date and time do not update. I thought Norton might be the culprit in this case, but I have thoroughly uninstalled it, and this problem still persists. (I am actually borrowing this laptop for work, so I don't know if someone else possibly did something weird to it before I started using it. As far as I can remember, I've always had this problem -- the automatic setting has never worked.)
I am connected to the internet when I do this, and I already have my time zone selected. Am I missing something obvious here?
I apologize if this issue has been brought up before, but I did a lot of searching and couldn't find anything. Any suggestions would be greatly appreciated!!
Thank you.

whenever I try to check the box for "Set date & time automatically"
You check it and the time does not update, or you try to check it and it doesn't show a little tick mark?
Try it with Console.app open and see does it report any errors. Try changing the time server.
AK

Z87 msi mpower big problem help me please auto turn off and never boot

i had bought msi z87 mpower from amazon 2 weeks ago while trying to open it, it just turn on and leds light up but no beep/ no display= no signal , i tried to take it out of case the same problem tried it with 1 stick of ram g-skill 1600 mhz 4g same problem i removed the vga card same problem i removed the ram , the motherboard didn't recognize it and power on led on but no beep nothing debug led all the time 00 , with cpu i5 4690k only some people told me , mobo didn't recognize the cpu because it's haswell refresh need update for bios , but how when i can't see any screen and it can't even boot just fan spin and leds light up nothing else , i sent it to some msi technical support in egypt to try to make bios for it , he told me he could bot it and update it from windows normally without any problem and he sent it back to me , while i took it to try at my home with my cpu the same problem motherboard didn't recognize my cpu , i had connected everything and as well wifi card with the pin and the 4 kits of 16 giga ram trying to power on same problem i did 1 restart and the motherboard never turns on again like dead
i get it out the case and removed everything except wifi card same problem no power i just removed the wifi card it turns on for 1 second the turn off automatically i connect it again, and mobo don't turn on again i just release this pin of wifi card out of mobo the leds turn on like if the pin of wifi card shorting the motherboard i don't know why i removed it at all and try to turn on the motherboard light up and fans works for 1 sec then turn off automatically like the motherboard shut down it self for safety i try to connect the vga card only with 1 ram and cpu but the motherboard don't turn on at all , so motherboard only turn on now with 1 ram and cpu just turn on for 1 sec and then off if i connect anything more it will not turn on at all same problem with other power supply i sent it back to technical shop they said it's just bios corrupted and nothing bad but they told me they can't make it because bios files on msi site doesn't work for some reason and they want to give me it back like that turn on/ off immediately what could i do , did they make something bad when i sent it to them at start because it was turn on normally and when i try it just 1 restart and full fail to power after that and they admit , they had work through it to windows and make normal bios update so what would be the issue , i feel like if wifi card made some short to the motherboard with it's pin or the bios failed ot recognize wifi card and failed after 1 restart i don't know where to start or what to do psu good cpu good ram is good tested what could make some motherboard no turn on , as well i have removed the battery for 5 minutes and try with it and i made clear cmos button still same and they said they didn't touch motherboard while making bios
help me please
pc spec:
cpu i5 4690k
mobo msi z87 mpower
ram g-skill 1600 4giga
vga zotac gtx 970 amp extreme edition OC
psu seasonic 600 watt eco
case corsair spec 03 gamming

Quote from: bassam.mohamed20 on 13-April-15, 02:46:28
okay tomorrow i will try another processor chip but what if doesn't work , same here i suspect it's bios so what could let some motherboard turn on and off immediately?
Bad CPU? bad Motherboard? Other stuff.
The only way to know is testing parts.
You said it already worked with another CPU. Did you check CPU socket pins?

HT201210 Problems with upgrading and "auto" synch

I have an iphone 4S and my partner has an iphone 4. We share the same Apple ID. She just accepted an upgraded (had been holding off because of the maps situation) and now our address books have synched!. Also, we receive a copy of the text messages we send each other. It seems our phones have merged and we want things back to normal! Any ideas on how to "separate out" our own phones? Thanks so much!!

hey asafbar,
curious to know, was there and problem with just installing version 4,23 immediately instead of uninstalling the previous version ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Static Problem: iPhone 3G in Auto with Apple Univ Dock, Charger

Here's my car setup: iPhone 3G in a first-generation Apple Universal Dock. The dock is connected to a Belkin PowerJolt SE charger via the dock connector AND a stereo cable from the dock's line-out connected to my car's AUX input.
When just the line-out is connected to the dock, I get clear, clean audio. When the Belkin charger AND the line-out is connected to the dock, I get ongoing static and diminished volume.
I'd like to be able to both charge my iPhone 3G AND have it connected to my car stereo. Any help on how to lose the static here? Or will the second-generation Apple Universal Dock will fare better?
Thanks!

Yes, the OEM charger works with both phones. Your English is fine, I've seen much much worse from people who supposedly have English as a first language.

[Solved] rc.conf problems with modules not auto loading

hi, i have vboxdrv and vboxnetflt in my rc.conf file but they are not loading when i start the computer. They are installed properly, when i use modprobe vboxdrv and modprobe vboxnetflt they both work. I've only been using arch for a few months, but linux in general for a couple of years, I check what log files i could find but i'm not sure what to look for. Thank you for you time. Please let me know what other info to provide. ps system is up to date as of 10/10/2011.
edit
apperently this is not the only issue i'm having, acpi-cpufreq is not loading in rc.conf either. Where do i got to find the log for rc.conf? or how to tell why the modules are not loading. Thanks again.
Last edited by dkjedi (2011-10-11 17:29:07)

hope this isn't too log of a post:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="America/Los_Angeles"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng netfs crond dbus wicd alsa fuse atd acpi-cpu-freq vboxdrv vboxnetflt !network)

How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

What "auto shutdown problem" are you talking about?

Problems joining Wi-Fi networks that require viewing a redirect page in iOS 8.1.1? Check your "Auto-Login" setting.

Are you having problems joining previously used Wi-Fi networks that require you to view a login or redirect page (say to accept Terms of Use) first? The problem could be your Auto-Login Wi-Fi network setting.
I found numerous cases where I could not access in-store Wi-Fi networks (Nordstrom was one), hotel networks or in fact networks where you had to first view a Terms and Conditions page or where you had to login via a web form.
These were all networks I had used before.
This appears to be due to the "Auto-Login" setting assuming that once you (re)join a previously known network you can just go ahead and use it without further action. When the iOS device receives an error trying to use the network, it silently drops the Wi-Fi association.
If this is happening to you, follow these steps:
1) Go to Settings -> Wi-Fi
2) Select the network you want to join
3) When a check-mark appears next to the SSID, press the "i" button on the right hand side
4) Set Auto-Join however you want, but shut off the Auto-Login switch
5) Now attempt to use the network and you should be presented with the usual redirect page with terms you must accept or where you must login to use the Wi-Fi network in question
This cleared up the issue for me everywhere I had previously been having issues.

Just let me get one thing straight...you don't change don't do this for the PC you have your router plugged in to?
"For Vista:
1. Open Control Panel, Network and Internet, Network and Sharing Center, Manage Network Connections
2. If Wireless, Right click on your Wireless Network Connection, otherwise, Right click on Local Area Connection and click Properties
3. Highlight Internet Protocol Version 4(TCP/IPv4)
4. Click Properties
5. Tick Use the Following IP Address and enter the IP you want to use for that PC. I would start at 192.168.0.100(D-Link) and work your way up on each additional device. The second device would be 192.168.0.101, the 3rd, 192.168.0.102 and so on. Like I said, different brands of routers use different IP's, so it could be 192.168.1.100 and so on, so you will need to know the IP address of your router first.
6. Subnet Mask is 255.255.255.0 on all pc's and devices
7. Default Gateway is 192.168.0.1(D-Link) or whatever your router's IP is on all pc's and devices
8. Tick Use the Following DNS Server Address and enter 192.168.0.1(D-Link) or whatever your router's IP is and click OK.
9. You will need to do this on all Vista Pc's"

PsE 9 auto-analysis problems

PsE 9 is having problems when attempting to auto-analyze photos. The catalog I am working with is one created in PsE 8 and converted to PsE 9. No converson errors were reported. The catalog is about 91 MB is size and contains 16000 photos and a couple thousand video clips.
These are my Media-Analysis preference options...
     (enabled) Analyze Photos for People Automatically
     (enabled) Analyze Media for Smart Tags Automatically
     (enabled) All filters
     (disabled) Run Analyzer on System Startup
     (disabled) Run Analyzer only when System is Idle
Analysis will stop after it has processed what seems a random count of photos. I can monitor the progress by hovering the mouse over the purple tag on the bottom of the Organizer screen. I know there is an issue when the same photo is processed for more than the normal amount of time. Normally the photos are processed at more than one per second. I have waited for up to 10 minutes to process the same photo..
The ElementsAutoAnalyzer.exe process exists in the Windows Task Manager. However the CPU utilization is at 0% when analysis is stalled.
Attempting to manually analyze a photo will result in a progress dialog to pop up and either it will show zero progress and hang or stop at 71%. I need to exit the Organzer, kill ElementsAutoAnalyzer.exe, and then restart the Organizer to get it to work again. But then it starts analyzing from the beginning again and then stops after some time.
It looks like there is a memory leak in ElementsAutoAnalyzer.exe. The VM starts at ~54 MB and keeps on growing with every processed photo. The size increases about 1 MB per second (about 15 photos).   The organizer stops showing progress after the ElementsAutoAnalyzer.exe VM size reaches around 1.7 GB.

I'm trying to use the advertised feature to help me narrow down issues with photos. I've already got too many of them. I will take any help from an automatic tool by showing potential issues with photos. I can be the final judge if a photo is out of focus or is too dark. My plan is to filter by Blur for example. Then I can quickly assess all photos for this and remove photos that are clearly not desirable.
Many of the issues pointed out by John Rellis can be resolved by making your media read-only.
The large amount of CPU times issue point out by John looks like was resolved in PsE/PrE 9 by the new 'Run Analyzer only when System is idle".
I also use this for videos. The scene detect is great and helps me pick out clips as I am assembling my videos.
I had the impression that Adobe cleaned up some of the auto-analysis features with PrE 9 so that more people could take advantage of it, like I would like to.

Problema escuchando con Bluetooth en el auto

hola versión 3.3.0.988 tiene problemas cin Bluetooth del auto.. conecta escuxho 1 cancion o dos y se desconecta.. anted funcionaba de maravillas ahora no se que pasa

Hola, tengo el mismo problema.De pura casualidad, ¿ya dieron solución a este "issue"?

Problem of MuVo2 FM auto st

Similar Messages

Maybe you are looking for